Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hammers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,051 records · Page 59

Hohlraum used as a single turn solenoid to generate seed magnetic field for inertial confinement fusion

Application of axial seed magnetic fields in the range 20-100 T that compress to greater than 10,000 T (100 MG) under typical NIF implosion conditions may significantly relax the conditions required for ignition and propagating burn in NIF ignition targets that are degraded by hydrodynamic instabilities. Such magnetic fields can: (a) permit the recovery of ignition, or at least significant alpha particle heating, in submarginal NIF targets that would otherwise fail because of adverse hydrodynamic instability growth, (b) permit the attainment of ignition in conventional cryogenic layered solid-DT targets redesigned to operate under reduced drive conditions, (c) permit the attainment of volumetric ignition in simpler, room-temperature single-shell DT gas capsules, and (d) ameliorate adverse hohlraum plasma conditions during laser drive and capsule compression. In general, an applied magnetic field should always improve the ignition condition for any NIF ignition target design.

Perkins, Lindsay John↗

Using Directional Diffusion Coefficients for Nonlinear Diffusion Acceleration of the First Order S{sub N} Equations in Near-Void Regions

The common definition of the diffusion coefficient as the inverse of three times the transport cross section is not compatible with voids. Morel introduced a non-local tensor diffusion coefficient that remains finite in voids. It can be obtained by solving an auxiliary transport problem without scattering or fission. Larsen and Trahan successfully applied this diffusion coefficient for enhancing the accuracy of diffusion solutions of very high temperature reactor (VHTR) problems that feature large, optically thin channels in the z-direction. It was demonstrated that a significant reduction of error can be achieved in particular in the optically thin region. Along the same line of thought, non-local diffusion tensors have been applied to modeling the TREAT reactor confirming the findings of Larsen and Trahan. Previous work of the authors have introduced a flexible Nonlinear-Diffusion Acceleration (NDA) method for the first order S{sub N} equations discretized with the discontinuous finite element method (DFEM). This NDA method uses a scalar diffusion coefficient in the low-order system that is obtained as the flux weighted average of the inverse transport cross section. Hence, it suffers from very large and potentially unbounded diffusion coefficients in the low order problem. However, it was noted that the choice of the diffusion coefficient does not influence consistency of the method at convergence and hence the diffusion coefficient is essentially a free parameter. The choice of the diffusion coefficient does, however, affect the convergence behavior of the nonlinear diffusion iterations. Within this work we use Morel's non-local diffusion coefficient in the aforementioned NDA formulation in lieu of the flux weighted inverse of three times the transport cross section. The goal of this paper is to demonstrate that significant enhancement of the spectral properties of NDA can be achieved in near void regions. For testing the spectral properties of the NDA with non-local diffusion coefficients, the periodical horizontal interface problem is used. This problem consists of alternating stripes of optically thin and thick materials both of which feature scattering ratios close to unity. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Functional Verification for Endcap Concentrator ASICs in the High-Granularity Calorimeter Upgrade of CMS

The High-Granularity Calorimeter (HGCAL) of CMS will undergo a major upgrade during Long-Shutdown 3. The Endcap Concentrator (ECON) ASICs represent key elements in the readout chain, processing trigger (ECON-T) and data (ECON-D) streams from the HGCROC to the lpGBT. The ECONs will operate in a radiation environment with a High-Energy Hadron (HEH) flux of $3\cdot10^{6} cm^{-2}s^{-1}$. This contribution describes the Universal Verification Methodology (UVM)-based functional verification of the ECON ASICs focusing on the re-use of existing components to manage the complexity of the verification environment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and Testing of the Endcap Concentrator ASICs for the CMS High-Granularity Calorimeter Upgrade

A major upgrade of the High-Granularity Calorimeter (HGCAL) in the CMS detector is planned for Long-Shutdown 3 (LS3), currently expected to start in 2026. This upgrade will contain over 6 million channels and the electronics will be required to be low power and to withstand a radiation environment with a High-Energy Hadron flux of 3x10**6 particles per square centimeter per second. The solution to this significant challenge is the two Endcap Concentrator (ECON) ASICs, ECON-T and ECON-D, working in tandem with the HGCROC front-end ASIC. The two ECON ASICs provide critical on-detector data reduction for both the 40 MHz trigger path (ECON-T) and 750 kHz data acquisition path (ECON-D) of the HGCAL. The ASICs are fabricated in 65nm CMOS. They are rad-tolerant to 600 Mrad with low power consumption (<2.5 mW/channel). This presentation will be a comprehensive description of each ECON design, including the infrastructure that they share as well as the elements that make each unique. The presentation will also include functionality and radiation tests for both ASICs, and the first high statistics characterization results from the full production of 75k ECON-D and ECON-T ASICs.

Hoff, James R. [Fermilab] (ORCID:0000000163514592)↗

Bright spots in 1 MA X pinches as a function of wire number and material.

Bright, intense x-ray sources with extreme plasma parameters (micropinch plasmas) have previously been characterized at 0.1-0.4 MA, but the scaling of such sources at higher current is poorly understood. The x-ray source size and radiation power of 1 MA X pinches were studied as a function of wire material (Al, Ti, Mo, and W) and number (1-, 2-, 8-, 32-, and 64-wire configurations). The smallest bright spots observed were from 32-wire tungsten X pinches, which produced {le} 11-16 {micro}m, {approx}2 J, 1-10 GW sources of 3-5 keV radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗