Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

X-ray secondary heating and ionization in quasar emission-line clouds

Accurate Monte Carlo computations of the X-ray secondary electron heating, ionization, and excitation of H and He gas in interstellar space and in quasar emission-line clouds, are presented. The fraction of energy deposited in each form is sensitive to the background ionization fraction, x = n(H+)/n(Htot), and can affect the temperature, ionization state, and line emissivities at large depths in X-ray photoionized clouds. Analytic fits are provided for these energy fractions over the range 0.0001-1 for primary electron energies up to many keV. In both broad-line and narrow-line clouds, emission lines sensitive to the energy budget and electron density may be strongly affected.

Shull, J. M.↗

Infrared observations of the Uranian system

Initial results are presented from analyses of IR interferometer spectrometer data collected by Voyager 2 during passes of Uranus and the moons Miranda and Ariel. The data covered reflected solar radiation in the visible and near-IR and thermal emissions between 25 and 50 microns. An equatorial atmospheric He mole fraction of 0.10-0.20 and a mass fraction of 0.16-0.34 was observed for Uranus. Para-hydrogen was also a significant fraction Uranus CH4 atmosphere. Average polar and equatorial spectra were employed to generate vertical temperature profiles between 60-900 mbar, with the finding that the temperatures at the equator and the poles are markedly similar between 400-900 mbar. The effective temperature of Uranus had a calculated upper limit of about 59.4 K, while the subsolar temperatures of Miranda and Arial were around 86 and 84 K, respectively. The albedos of the two satellites indicated surface microstructures composed of isotopically scattering grains.

Hanel, R.↗

The crystallization of small particles and droplets

A general expression is derived for the volume fraction of material crystallized as a function of time for the situation where boundary effects may be important, and it is applied to a sample consisting of a monodisperse array of small particles. It is assumed that crystallization occurs via homogeneous nucleation followed by crystal growth. The crystallization rate is shown to be controlled by a single dimensionless parameter, beta. Beta exp 1/4 is a dimensionless particle radius which tends to be small when the growth rate is large or when the nucleation rate is small. When beta is large, the general expression for the volume fraction transformed reduces to the standard expression valid for bulk samples. When beta is small, it reduces to the formula used to compute the volume fraction crystallized in droplet undercooling experiments. Hence, the present results are pertinent for the interpretation of some droplet undercooling experiments as well as isothermal DSC and DTA experiments.

Weinberg, M. C.↗

Feasibility experiments on time-resolved fluorosensing applied to oil slicks

The introduction of time resolved observations can provide a very penetrating tool in the practice of laser fluorosensing. The investigations have demonstrated a relevance of multispectral, time resolved analysis for oil fingerprinting. By comparative studies on a variety of crude oils and their most significant fractions, it was found that the process of time decay in a composite oil is characterized by a few steps, which are associated with specific components in the medium light range. The average decay times of these pure fractions are markedly differentiated as to absolute values and spectral spread; as a consequence, the corresponding parameters in the resultant crude are quite sensitive to the particular mixture of these components. Measurements of the time response give then a finer discrimination between oil classes, depending on the relative content of certain fractions. Experiments were pursued with an improved fluorosensor facility, in order to test the application of time resolved fluorosensing to remote samples on water.

Camagni, P.↗

Studies of the scattering/absorption of minerals

Reflectance spectra were computed for water ice and ammonia ice mixtures as functions of weight fraction, grain size, and viewing geometry to simulate possible outer solar system satellite surfaces. Reflectance spectra of planetary surfaces are most affected by the weight fraction and grain sizes of the minerals in the surface. The reflectance can range from 1.0 to about 0.01 by changing the grain size or weight fraction, a factor of 100. Viewing geometry changes the reflectance by about 25 percent or less.

Clark, Roger N.↗

Nondestructive ultrasonic characterization of two-phase materials

The development of ultrasonic methods for the nondestructive characterization of mechanical properties of two phase engineering materials are described. The primary goal was to establish relationships between the nonlinearity parameter and the percentage of solid solution phase in two phase systems such as heat treatable aluminum alloys. The acoustoelastic constant was also measured on these alloys. A major advantage of the nonlinearity parameter over that of the acoustoelastic constant is that it may be determined without the application of stress on the material, which makes the method more applicable to inservice nondestructive characterization. The results obtained on the heat treatable 7075 and the work hardenable 5086 and 5456 aluminum alloys show that both the acoustoelastic constant and the acoustic nonlinearity parameter change considerable with the volume fraction of second phase precipitates in these aluminum alloys. A mathematical model was also developed to relate the effective acoustic nonlinearity parameter to volume fraction of second phase precipitates in an alloy. The equation is approximated to within experimental error by a linear expression for volume fractions up to approx. 10%.

Salama, Kamel↗

Simulations of high Mach number perpendicular shocks with resistive electrons

A simulation code which models the ions as microparticles and the electrons as a resistive massless fluid is employed to study the structure of high Mach number perpendicular shocks. It is found that stable stationary shock solutions can be obtained for Alfven Mach numbers (M sub A) between 5 and 60 for upstream plasmas where the ratio of the plasma pressure to the magnetic pressure is 1, providing that the upstream resistive diffusion length is much smaller than the ion inertial length. For much larger resistive diffusion lengths, the magnetic field overshoot is damped, and the imbalance in the electron momentum equation results in a periodic fluctuation of the fraction of reflected ions. In the limit of M sub A of less than 10, the magnetic overshoot and the fraction of reflected ions increase with increasing M sub A, while at higher Mach numbers the fraction of reflected ions peaks at about 40 percent and the magnetic field overshoot increases at a much slower rate. Electron inertial effects are also considered.

Quest, K. B.↗

Processing-structure characterization of rheocast IN-100 superalloy

The rheocasting solidification process was applied in the production of IN-100 nickel base superalloy, and the effects of processing variables, such as stirring speed, isothermal stirring time, and volume fraction solid during isothermal stirring, on the resultant rheocast structure were investigated. Ingots that were furnace cooled at the same rate but without stirring were compared with the rheocast ingots. Rheocasting yielded fine-grained structures, where the extent of microsegregation, the variation in macrostructure, and the solidification-induced porosity and ingot cracking were found to be reduced in comparison to the unstirred ingots. The grain size and nonuniformity were reduced by increasing the stirring speed, isothermal stirring time, or the volume fraction solid during stirring; decreased microsegregation was achieved by an increase in the volume fraction solid. The structures of grain boundaries lent support to the grain boundary mechanism proposed by Vogel et al. (1977) for rheocasting.

Cheng, Jung-Jen Allen↗

Ion reflection, gyration, and dissipation at supercritical shocks

Topics on collisionless plasmas are discussed and include: (1) Ion reflection is the dominant ion dissipation mechanism at nearly perpendicular, supercritical shocks. (2) An increasing fraction of the ions incident on a supercritical shock is reflected as the Mach number increases. The actual fraction reflected can be predicted using the Rankine Hugoniot conservation relations. (3) The effective temperature associated with the dispersion in velocity space associated with ion reflection accounts for a large fraction of the temperature rise observed across supercritical, quasi perpendicular shocks.

Gosling, J. T.↗

On the connection between mare basalts and picritic volcanic glasses

The liquid lines of descent were calculated for low-pressure equilibrium and fractional crystallization of mare basaltic liquids in order to examine the postulated link between picritic volcanic glasses and mare basalts. The models of Longhi (1977, 1982) were modified by including expressions for the armalcolite/ilmenite surface boundary and the Cr-spinel liquidus surface, average molar partition coefficients for armalcolite/liquid pairs, and new experimental data of Longhi and Pan (1987). The results indicate that, with two exceptions, mare basalts and picritic volcanic glasses are not related by simple, linear-surface crystallization processes. However, the compositions of Luna 24 ferrobasalt and Apollo 11 high-K basalts could be closely matched with the lines of liquid descent of certain green and orange picritic glasses, respectively. The calculations also show that the picritic magmas would have fractionated to produce basalts with bulk and mineral compositions similar to those of mare basalts, supporting the hypothesis that mare basalts have fractionated compositions and that the small number of observed linkages between basalts and picritic parents is a consequence of limited sampling.

Longhi, John↗

Cloud fields retrieved from analysis of HIRS2/MSU sounding data

The methods used to determine effective cloud fraction (cloud fraction times cloud emissivity at 11-14 microns) and cloud top pressure from analysis of HIRS2/MSU sounding data are described. Identical procedures are used day and night so as to allow for meaningful day-night difference fields. Results are shown for June 1979. The monthly mean effective cloud fraction is 43.4 percent, resulting from a 45.2 percent value at 0300 LT and 41.6 percent at 1500 LT. The retrieved single-day cloud field for June 11 shows good agreement with high spatial resolution visible and infrared imagery.

Susskind, J.↗

Mechanical properties of SiC fiber-reinforced reaction-bonded Si3N4 composites

The room temperature mechanical and physical properties of silicon carbide fiber reinforced reaction-bonded silicon nitride composites (SiC/RBSN) have been evaluated. The composites contained 23 and 40 volume fraction of aligned 140 micro m diameter chemically vapor deposited SiC fibers. Preliminary results for composite tensile and bend strengths and fracture strain indicate that the composites displayed excellent properties when compared with unreinforced RBSN of comparable porosity. Fiber volume fraction showed little influence on matrix first cracking strain but did influence the stressed required for matrix first cracking and for ultimate composite fracture strength. It is suggested that by reducing matrix porosity and by increasing the volume fraction of the large diameter SiC fiber, it should be possible to further improve the composite stress at which the matrix first cracks.

Bhatt, Ramakrishna T.↗

Quantitative non-destructive evaluation of porous composite materials based on ultrasonic wave propagation

Two complementary ultrasonic techniques for characterizing porosity in fiber-reinforced composite laminates are evaluated. Five uniaxial graphite-fiber/epoxy-matrix composites having a range of 1 to 8 percent volume fraction of solid glass inclusions to model porosity were investigated. In one technique, signal loss was measured in transmission mode and slope of attenuation, obtained from the first order coefficient of a two-parameter polynomial fit about the center frequency of the useful bandwidth, was used as the ultrasonic parameter to characterize the porosity. The results of these transmission mode measurements displayed a good correlation between the volume fraction of porosity and the slope of attenuation. Integrated polar backscatter was used as a second ultrasonic parameter for the characterization of the porosity in these samples. A single transducer insonified the samples and measured the resulting backscatter at a polar angle of 30 deg with respect to the normal of the sample surface with the azimuthal angles centered at 0 deg with respect to the fiber orientation (i.e., along the fibers). Integrated polar backscatter also displayed good correlation with the volume fraction of porosity.

Miller, James G.↗

Satellite rainfall retrieval by logistic regression

The potential use of logistic regression in rainfall estimation from satellite measurements is investigated. Satellite measurements provide covariate information in terms of radiances from different remote sensors.The logistic regression technique can effectively accommodate many covariates and test their significance in the estimation. The outcome from the logistical model is the probability that the rainrate of a satellite pixel is above a certain threshold. By varying the thresholds, a rainrate histogram can be obtained, from which the mean and the variant can be estimated. A logistical model is developed and applied to rainfall data collected during GATE, using as covariates the fractional rain area and a radiance measurement which is deduced from a microwave temperature-rainrate relation. It is demonstrated that the fractional rain area is an important covariate in the model, consistent with the use of the so-called Area Time Integral in estimating total rain volume in other studies. To calibrate the logistical model, simulated rain fields generated by rainfield models with prescribed parameters are needed. A stringent test of the logistical model is its ability to recover the prescribed parameters of simulated rain fields. A rain field simulation model which preserves the fractional rain area and lognormality of rainrates as found in GATE is developed. A stochastic regression model of branching and immigration whose solutions are lognormally distributed in some asymptotic limits has also been developed.

Chiu, Long S.↗

Optical measurements of soot and temperature profiles in premixed propane-oxygen flames

Two laser diagnostic techniques were used to measure soot volume fractions, number densities and soot particle radii in premixed propane/oxygen flat flames. The two techniques used were two wavelength extinction, using 514.5 nm to 632.8 nm and 457.9 nm to 632.8 nm wavelength combinations, and extinction/scattering using 514.5 nm light. The flames wre fuel-rich (equivalence ratios from 2.1 to 2.8) and had cold gas velocities varying from 3.4 to 5.5 cm/s. Measurements were made at various heights above the sintered-bronze, water-cooled flat flame burner with the equivalence ratio and cold gas velocity fixed. Also, measurements were made at a fixed height above the burner and fixed cold gas velocity while varying the equivalence ratio. Both laser techniques are based on the same underlying assumptions of particle size distribution and soot optical properties. Full Mie theory was used to determine the extinction coefficients K sub ext, and the scattering efficiencies, Q sub vv. Temperature measurements in the flames were made using infrared radiometry. Good agreement between the two techniques in terms of soot particle radii, number density and volume fraction was found for intensity ratios (I/I sub o) between 0.1 and 0.8. For intensity ratios higher or lower than this range, the differences in extinction coefficients at the wavelengths chosen for the two-wavelength method are too small to give accurate results for comparing particle radii and number densities. However, when comparing only soot volume fractions, the agreement between the two techniques continued to be good for intensity ratios up to 0.95.

Lyons, Valerie J.↗

Isotopic characterisation of kerogen-like material in the Murchison carbonaceous chondrite

Data on isotopic composition of C, H, and N in insoluble organic fraction from the Murchison CM chondrite were used to discriminate between different theories for the origin of prebiotic organic material in the early solar system. Considerable isotopic variability was found among the samples and attributed to kerogen-like organic fraction. Three to four different isotopic components, two of them of polycyclic aromatic nature, were tentatively identified. Aliphatic moieties in the kerogen-like material, most of the polycyclic aromatic network, and extractable amino acids were found to carry a highly D-enriched component believed to have originated in an interstellar molecular cloud. A least part of the polycyclic aromatic fraction may also represent interstellar material.

Kerridge, John F.↗

Design, calibration and error analysis of instrumentation for heat transfer measurements in internal combustion engines

The paper reports the methodology and uncertainty analyses of instrumentation for heat transfer measurements in internal combustion engines. Results are presented for determining the local wall heat flux in an internal combustion engine (using a surface thermocouple-type heat flux gage) and the apparent flame-temperature and soot volume fraction path length product in a diesel engine (using two-color pyrometry). It is shown that a surface thermocouple heat transfer gage suitably constructed and calibrated will have an accuracy of 5 to 10 percent. It is also shown that, when applying two-color pyrometry to measure the apparent flame temperature and soot volume fraction-path length, it is important to choose at least one of the two wavelengths to lie in the range of 1.3 to 2.3 micrometers. Carefully calibrated two-color pyrometer can ensure that random errors in the apparent flame temperature and in the soot volume fraction path length will remain small (within about 1 percent and 10-percent, respectively).

Ferguson, C. R.↗

Gravitational lensing statistics of amplified supernovae

Amplification statistics of gravitationally lensed supernovae can provide a valuable probe of the lensing matter in the universe. A general probability distribution for amplification by compact objects is derived which allows calculation of the lensed fraction of supernovae at or greater than an amplification A and at or less than an apparent magnitude. Comparison of the computed fractions with future results from ongoing supernova searches can lead to determination of the mass density of compact dark matter components with masses greater than about 0.001 solar mass, while the time-dependent amplification (and polarization) of the expanding supernovae constrain the individual masses. Type II supernovae are found to give the largest fraction for deep surveys, and the optimum flux-limited search is found to be at approximately 23d magnitude, if evolution of the supernova rate is neglected.

Linder, Eric V.↗