Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feedbacks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

MEP pathway products allosterically promote monomerization of deoxy-D-xylulose-5-phosphate synthase to feedback-regulate their supply

Isoprenoids are a very large and diverse family of metabolites required by all living organisms. All isoprenoids derive from the double-bond isomers isopentenyl diphosphate (IPP) and dimethylallyl diphosphate (DMAPP), which are produced by the methylerythritol 4-phosphate (MEP) pathway in bacteria and plant plastids. It has been reported that IPP and DMAPP feedback-regulate the activity of deoxyxylulose 5-phosphate synthase (DXS), a dimeric enzyme that catalyzes the main flux-controlling step of the MEP pathway. Here we provide experimental insights into the underlying mechanism. Isothermal titration calorimetry and dynamic light scattering approaches showed that IPP and DMAPP can allosterically bind to DXS in vitro, causing a size shift. In silico ligand binding site analysis and docking calculations identified a potential allosteric site in the contact region between the two monomers of the active DXS dimer. Modulation of IPP and DMAPP contents in vivo followed by immunoblot analyses confirmed that high IPP/DMAPP levels resulted in monomerization and eventual aggregation of the enzyme in bacterial and plant cells. Loss of the enzymatically active dimeric conformation allows a fast and reversible reduction of DXS activity in response to a sudden increase or decrease in IPP/DMAPP supply, whereas aggregation and subsequent removal of monomers that would otherwise be available for dimerization appears to be a more drastic response in the case of persistent IPP/DMAPP overabundance (e.g., by a blockage in their conversion to downstream isoprenoids). Our results represent an important step toward understanding the regulation of the MEP pathway and rational design of biotechnological endeavors aimed at increasing isoprenoid contents in microbial and plant systems.

59 BASIC BIOLOGICAL SCIENCES↗

Mitigating urban climate-energy feedback with citywide building-integrated photovoltaics implementation

Urban heat islands (UHIs) intensify cooling demands, whose waste heat further exacerbates UHI, creating a self-reinforcing feedback loop. Building-integrated photovoltaics (BIPV) can break this cycle by generating electricity and altering urban climate-energy interactions, yet its net impact remains unresolved. Using a cross-scale modeling framework for 118,521 buildings in Hong Kong, we demonstrate that BIPV glazing reduces cooling demand through improved insulation and lower solar heat gain, while inducing diurnal thermal asymmetry of daytime warming (up to +1.9°C) and nighttime cooling (up to −2.5°C). This microclimate regulation indirectly contributes to a 0.6% reduction in citywide building energy use. Cumulative savings from electricity generation and reduced energy use reach 4.7% (2,060.2 GWh) and 10.1% (4,401.3 GWh) under low- and high-coverage deployment, respectively, with building-level savings of −20.1% ± 11.7% (mean ± SD) at high coverage. We establish BIPV as a configurable climate-energy regulator that enables net-zero, heat-resilient planning and quantifies deployment trade-offs in cooling-dominated cities worldwide.

Building-integrated photovoltaics (BIPV)↗

Extratropical shortwave cloud feedbacks in the context of the global circulation and hydrological cycle

Shortwave (SW) cloud feedback ($SW_{FB}$) is the primary driver of uncertainty in the effective climate sensitivity (ECS) predicted by global climate models (GCMs). ECS for several GCMs participating in the sixth assessment report exceed 5K, above the fifth assessment report ‘likely’ maximum (4.5K) due to extratropical $SW_{FB}$’s that are more positive than those simulated in the previous generation of GCMs. Here we show that across 57 GCMs Southern Ocean $SW_{FB}$ can be predicted from the sensitivity of column-integrated liquid water mass (LWP) to moisture convergence and to surface temperature. In this work, the response of LWP to moisture convergence and the response of albedo to LWP anti-correlate across GCMs. This is because GCMs that simulate a larger response of LWP to moisture convergence tend to have higher mean-state LWPs, which reduces the impact of additional LWP on albedo. Observational constraints suggest a modestly negative Southern Ocean $SW_{FB}$— inconsistent with extreme ECS.

54 ENVIRONMENTAL SCIENCES↗

Impact of Turbulence Representation on the Relationship Between Cloud Feedback and Aerosol‐Cloud Interaction in an E3SMv2 Perturbed Parameter Ensemble

Recent studies reveal an anti‐correlation between global cloud feedback (CF) and effective radiative forcing due to aerosol‐cloud interaction (ERFaci) in Earth system models, but the physical mechanisms underlying it remain uncertain. Here we investigate how different turbulence representations contribute to this relationship over the global ocean using an ensemble of Energy Exascale Earth System Model version 2 simulations with perturbed turbulence parameters. The anti‐correlation appears only in the tropical ascent regime. In the Northern Hemisphere midlatitude and high latitude regimes, there is no significant correlation, and in the tropical marine low cloud and Southern Ocean regimes, the correlation is positive. These opposite correlations are primarily driven by opposing CF responses to perturbed parameters. We find that the mean‐state turbulent mixing strength affects both CF and ERFaci, enabling strong correlations in certain regimes. This study highlights the complex linkages between CF and ERFaci through turbulent processes across diverse cloud regimes.

54 ENVIRONMENTAL SCIENCES↗

Resolving Low Cloud Feedbacks Globally With E3SM High‐Res MMF: Agreement With LES but Stronger Shortwave Effects

This study investigates low cloud feedback in a warmer climate using global simulations from the High-Resolution Multi-scale Modeling Framework (HR-MMF), which explicitly simulates small-scale eddies globally. Two 5-year simulations—one with present-day sea surface temperatures (SSTs) and a second with SSTs warmed uniformly by 4 K—reveal a positive global shortwave cloud radiative effect (SWCRE = 0.3 W/m 2 /K), comparable to estimates from CMIP models. As the climate warms, significant reductions in low cloud cover occur over stratocumulus regions. This study is the first attempt to compare HR-MMF results with predictions from idealized large-eddy simulations from the CGILS intercomparison. Despite different underlying assumptions, we find qualitative agreement in SWCRE and inversion height changes between HR-MMF and CGILS predictions. This suggests reasonable credibility for the CGILS framework in predicting cloud responses under the out-of-sample conditions found in HR-MMF. However, the HR-MMF exhibits stronger SWCRE changes than predicted by CGILS. We explore potential causes for this discrepancy, examining variations in cloud-controlling factors (CCFs) and cloud conditions. Our results show a fairly homogeneous SWCRE response, with little systematic variation tied to the variations in CCFs. This reveals a dominant role for SST forcing in modulating SWCRE.

boundary-layer clouds↗

Resonant field amplification with feedback-stabilized regime in current driven resistive wall mode

The stability and resonant field response of current driven resistive wall modes are numerically studied for DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] low pressure plasmas. The resonant field response of the feedback-stabilized resistive wall mode is investigated both analytically and numerically, and compared with the response from intrinsically stable or marginally stable modes. The modeling qualitatively reproduces the experimental results. Furthermore, based on some recent results and on the indirect numerical evidence in this work, it is suggested that the mode stability behavior observed in DIII-D experiments is due to the kink-peeling mode stabilization by the separatrix geometry. The phase inversion radius of the computed plasma displacement does not generally coincide with the radial locations of rational surfaces, also supporting experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optical boundary reconstruction of tokamak plasmas for feedback control of plasma position and shape

A new diagnostic is developed to reconstruct the plasma boundary using visible wavelength images. Exploiting the plasma's edge localized and toroidally symmetric emission profile, a new coordinate transform is presented to reconstruct the plasma boundary from a poloidal view image. The plasma boundary reconstruction is implemented in MATLAB and applied to camera images of Mega-Ampere Spherical Tokamak discharges. The optically reconstructed plasma boundaries are compared to magnetic reconstructions from the offline reconstruction code EFIT, showing very good qualitative and quantitative agreement. Average errors are within 2 cm and correlation is high. In the current software implementation, plasma boundary reconstruction from a single image takes 3 ms. The applicability and system requirements of the new optical boundary reconstruction, called OFIT, for use in both feedback control of plasma position and shape and in offline reconstruction tools are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fabrication-tolerant 1310 nm laterally-coupled distributed feedback lasers with high side mode suppression ratios

A laterally-coupled distributed feedback (LC-DFB) laser was designed and fabricated using stepper lithography. Such DFB lasers eliminate the need of the commonly required re-growth steps in a conventional DFB laser fabrication process. With LC-DFB lasers, the grating can be lithographically patterned out of the ridge waveguide. High order gratings can enhance the lithographic tolerance for lower resolution patterning, yielding lasers more amenable to mass-manufacturing. 1310 nm InGaAsP/InP LC-DFB laser with third-order gratings was fabricated using i-line 5x stepper lithography. Excellent side mode suppression ratio over 52 dB has been measured with a single mode lasing around 1310 nm.

36 MATERIALS SCIENCE↗

Feedback cooling of cantilever motion using a quantum point contact transducer

We use a quantum point contact (QPC) as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. The QPC is included in an active feedback loop designed to cool the cantilever's fundamental mechanical mode, achieving a squashing of the QPC noise at high gain. The minimum achieved effective mode temperature of 0.2 K and the displacement resolution of 10{sup -11} m/{radical}(Hz) are limited by the performance of the QPC as a one-dimensional conductor and by the cantilever-QPC capacitive coupling.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Zonal flow generation and its feedback on turbulence production in drift wave turbulence

Plasma turbulence described by the Hasegawa-Wakatani equations is simulated numerically for different models and values of the adiabaticity parameter C. It is found that for low values of C turbulence remains isotropic, zonal flows are not generated and there is no suppression of the meridional drift waves and particle transport. For high values of C, turbulence evolves towards highly anisotropic states with a dominant contribution of the zonal sector to the kinetic energy. This anisotropic flow leads to a decrease of turbulence production in the meridional sector and limits the particle transport across the mean isopycnal surfaces. This behavior allows to consider the Hasegawa-Wakatani equations a minimal PDE model, which contains the drift-wave/zonal-flow feedback loop mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

2 {mu}m laterally coupled distributed-feedback GaSb-based metamorphic laser grown on a GaAs substrate

We report a type-I GaSb-based laterally coupled distributed-feedback (DFB) laser grown on a GaAs substrate operating continuous wave at room temperature. The laser structure was designed to operate near a wavelength of 2 {mu}m and was grown metamorphically with solid-source molecular beam epitaxy. The device was fabricated using a 6th-order deep etch grating structure as part of the sidewalls of the narrow ridge waveguide. The DFB laser emits total output power of up to 40 mW in a single longitudinal mode operation at a heat-sink temperature of 20 Degree-Sign C.

36 MATERIALS SCIENCE↗

Calculating the spontaneous magnetization and defining the Curie temperature using a positive-feedback model

A positive-feedback mean-field modification of the classical Brillouin magnetization theory provides an explanation of the apparent persistence of the spontaneous magnetization beyond the conventional Curie temperature—the little understood “tail” phenomenon that occurs in many ferromagnetic materials. The classical theory is unable to resolve this apparent anomaly. The modified theory incorporates the temperature-dependent quantum-scale hysteretic and mesoscopic domain-scale anhysteretic magnetization processes and includes the effects of demagnetizing and exchange fields. It is found that the thermal behavior of the reversible and irreversible segments of the hysteresis loops, as predicted by the theory, is a key to the presence or absence of the “tails.” The theory, which permits arbitrary values of the quantum spin number J, generally provides a quantitative agreement with the thermal variations of both the spontaneous magnetization and the shape of the hysteresis loop.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging of free carriers in semiconductors via optical feedback in terahertz quantum cascade lasers

To monitor the density of photo-generated charge carriers on a semiconductor surface, we demonstrate a detectorless imaging system based on the analysis of the optical feedback in terahertz quantum cascade lasers. Photo-excited free electron carriers are created in high resistivity n-type silicon wafers via low power (≅40 mW/cm{sup 2}) continuous wave pump laser in the near infrared spectral range. A spatial light modulator allows to directly reconfigure and control the photo-patterned intensity and the associated free-carrier density distribution. The experimental results are in good agreement with the numerical simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen peroxide detection with quartz-enhanced photoacoustic spectroscopy using a distributed-feedback quantum cascade laser

A quartz-enhanced photoacoustic spectroscopy sensor system was developed for the sensitive detection of hydrogen peroxide (H{sub 2}O{sub 2}) using its absorption transitions in the v{sub 6} fundamental band at ∼7.73 μm. The recent availability of distributed-feedback quantum cascade lasers provides convenient access to a strong H{sub 2}O{sub 2} absorption line located at 1295.55 cm{sup −1}. Sensor calibration was performed by means of a water bubbler that generated titrated average H{sub 2}O{sub 2} vapor concentrations. A minimum detection limit of 12 parts per billion (ppb) corresponding to a normalized noise equivalent absorption coefficient of 4.6 × 10{sup −9} cm{sup −1}W/Hz{sup 1/2} was achieved with an averaging time of 100 s.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

System analysis of force feedback microscopy

It was shown recently that the Force Feedback Microscope (FFM) can avoid the jump-to-contact in Atomic force Microscopy even when the cantilevers used are very soft, thus increasing force resolution. In this letter, we explore theoretical aspects of the associated real time control of the tip position. We take into account lever parameters such as the lever characteristics in its environment, spring constant, mass, dissipation coefficient, and the operating conditions such as controller gains and interaction force. We show how the controller parameters are determined so that the FFM functions at its best and estimate the bandwidth of the system under these conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling laser-induced periodic surface structures: Finite-difference time-domain feedback simulations

A model predicting the formation of laser-induced periodic surface structures (LIPSSs) is presented. That is, the finite-difference time domain method is used to study the interaction of electromagnetic fields with rough surfaces. In this approach, the rough surface is modified by “ablation after each laser pulse,” according to the absorbed energy profile, in order to account for inter-pulse feedback mechanisms. LIPSSs with a periodicity significantly smaller than the laser wavelength are found to “grow” either parallel or orthogonal to the laser polarization. The change in orientation and periodicity follow from the model. LIPSSs with a periodicity larger than the wavelength of the laser radiation and complex superimposed LIPSS patterns are also predicted by the model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the local temperature during feedback controlled electromigration in gold nanowires

Feedback controlled electromigration (FCE) in metallic nanowires has been widely used for various purposes. However, the control of the local temperature during FCE remains a challenge. Here, we report that the environment temperature can be used as a knob to tune the local temperature during FCE in gold nanowires. FCE was performed in gold nanowires at various environment temperatures ranging from 4.2 K to 300 K. We find that the dissipated power normalized by the cross section area of the nano constriction is linearly proportional to the environment temperature. Interestingly, the estimated local maximum temperature parabolically depends on the environment temperature. A minimum in the local temperature can be reached if an appropriate environment temperature is chosen. Our findings are well supported by the finite element simulation. Moreover, the data indicates the coupling between FCE triggering current density and local temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Output characteristics of organic distributed feedback lasers with varying grating heights

In this study, we examine the influence of the corrugation height of surface relief gratings on the output characteristics of organic distributed feedback (DFB) lasers. A series of surface relief gratings with a constant corrugation period (410 nm) and variable corrugation heights ranging from 20 and 80 nm are fabricated by the illumination of a new developed photosensitive azobenzene containing material with an interference pattern. A blend of poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo(2,1′,3)-thiadiazol)] and poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] is used as organic laser active material which is deposited by spin-coating onto the grating array. The investigation of the laser output characteristics reveals an increase of the slope efficiency by a factor of 4 from 0.8% to 3.7% due to an increase of the grating height. The laser threshold decreases only slightly from 8.5 μJ/cm{sup 2} to 6.0 μJ/cm{sup 2} with increasing corrugation height. We interpret this as a result of the change of coupling between light mode and grating. The study helps to relate this to loss mechanisms of the DFB lasing process. This enables a further optimization of the DFB laser design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗