SEARCH · Engineering Papers

Results for “evolution of the Universe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Model-independent constraints on Ωm and H ( z ) from the link between geometry and growth

ABSTRACT We constrain the expansion history of the Universe and the cosmological matter density fraction in a model-independent way by exclusively making use of the relationship between background and perturbations under a minimal set of assumptions. We do so by employing a Gaussian process to model the expansion history of the Universe from present time to the recombination era. The expansion history and the cosmological matter density are then constrained using recent measurements from cosmic chronometers, Type-Ia supernovae, baryon acoustic oscillations, and redshift-space distortion data. Our results show that the evolution in the reconstructed expansion history is compatible with the Planck 2018 prediction at all redshifts. The current data considered in this study can constrain a Gaussian process on H(z) to an average $9.4 {{\ \rm per\ cent}}$ precision across redshift. We find Ωm = 0.224 ± 0.066, lower but statistically compatible with the Planck 2018 cosmology. Finally, the combination of future DESI measurements with the CMB measurement considered in this work holds the promise of $8 {{\ \rm per\ cent}}$ average constraints on a model-independent expansion history as well as a five-fold tighter Ωm constraint using the methodology developed in this work.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Comparing Intrinsic Catalytic Activity and Practical Performance of Ni- and Pt-Based Alkaline Anion Exchange Membrane Water Electrolyzer Cathodes

The stringent cost and performance requirements of renewable hydrogen production systems dictate that electrolyzers benefit from the use of nonprecious catalysts only if they deliver the same level of activity and durability as their precious metal counterparts. Here we report on recent work to understand interrelationships between the intrinsic activity of Ni- and Pt-based electrolyzer cathode catalysts and their performance in zero-gap alkaline water electrolyzer assemblies. Our results suggest that nanoparticulate Ni–Mo exhibits HER activity that is roughly 10-fold lower than Pt–Ru on the basis of turnover frequency under low (≤100 mV) polarization conditions. We further found that the HER activity of Ni–Mo/C cathodes is inhibited by aryl piperidinium anionexchange ionomers bearing bicarbonate counter-anions. After addressing this poisoning effect, we produced electrolyzer assemblies based on Ni–Mo/C cathodes that delivered indistinguishable current density vs cell potential relationships compared to otherwise identical assemblies with Pt–Ru cathodes. This result indicates that the contribution of the cathode to the total cell polarization is small, even for the less active Ni–Mo/C catalyst, and further implies that Pt-based cathodes can indeed be replaced by nonprecious alternatives with no loss in performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

A comparison of the baryonic Tully–Fisher relation in MaNGA and IllustrisTNG

We compare an observed baryonic Tully–Fisher relation (BTFR) from the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) and HI-MaNGA surveys to a simulated BTFR from the cosmological magnetohydrodynamical simulation, IllustrisTNG. To do so, we calibrate the BTFR of the local universe using 377 galaxies from the MaNGA and HI-MaNGA surveys, and perform mock 21 cm observations of matching galaxies from IllustrisTNG. The mock observations are used to ensure that the comparison with the observed galaxies is fair since it has identical measurement algorithms, observational limitations, biases, and uncertainties. For comparison, we also calculate the BTFR for the simulation without mock observations and demonstrate how mock observations are necessary to fairly and consistently compare between observational and theoretical data. We report a MaNGA BTFR of log$_{10} (M_{ \rm Bary}/M_\odot)= (2.97 \pm 0.18)$ log$_{10} V_{ \rm Rot} + (4.04 \pm 0.41)\, \log _{10}{M_{\odot }}$ and an IllustrisTNG BTFR of log$_{10} (M_{ \rm Bary}/M_\odot) = (2.94 \pm 0.23$) log$_{10} V_{ \rm Rot} + (4.15 \pm 0.44)\, \log _{10}{M_{\odot }}$. Thus, MaNGA and IllustrisTNG produce BTFRs that agree within uncertainties, demonstrating that IllustrisTNG has created a galaxy population that obeys the observed relationship between mass and rotation velocity in the observed universe.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Auriga Streams III: the mass–metallicity relation does not rule out tidal mass-loss in Local Group satellites

The mass–metallicity relation is a fundamental galaxy scaling law that has been extended to the faintest systems in the Local Group. We show that the small scatter in this relation, which has been used to argue against tidal mass-loss in Local Group satellites, is consistent with the level of disruption in the Auriga simulations. For every accreted system in Auriga, we compute stellar masses and metallicities two ways: considering the total system (bound + lost material) and only considering the progenitor. Accreted systems in Auriga have a tight relation between total stellar mass and metallicity, with scatter at a fixed stellar mass driven by age. When only considering the progenitor, the tidally evolved mass–metallicity relation has similar scatter (⁠~0.27 dex) as observed for the Local Group satellites (⁠~0.23 dex). Satellites that lie above the evolved relation have experienced substantial mass-loss and typically have low metallicity for their total stellar mass. Even satellites that fall exactly on the evolved relation can lose over half of their stellar mass. Only satellites substantially below the evolved relation are reliably intact. Based on their offset from the observed relation, we predict which Milky Way and M31 satellites have tidal tails waiting to be discovered.

Galaxy: halo↗

DOE OSTI2025

LiCl–Based Aqueous Electrolytes for Efficient Iron Electrodeposition

This study investigates room temperature, aqueous electrolytes for efficient iron electrodeposition. Specifically, a novel lithium chloride-based electrolyte was identified to suppress hydrogen evolution while promoting fast kinetics of iron electrodeposition, achieving high coulombic efficiency (>90%) at high current densities (>400 mA cm −2 ). Electrochemical analysis of the partial current densities of iron deposition and hydrogen co-evolution revealed that water reduction is kinetically suppressed in this electrolyte, resulting in an increase in the measured coulombic efficiency. Furthermore, a detailed investigation of the iron speciation and their complexation was performed, which revealed that, in concentrated LiCl-containing electrolytes, the ferrous (Fe 2+ ) species coordinate with chloride rather than water, enhancing deposition kinetics. The combined effect of enhanced electrodeposition kinetics and suppressed water activity provide elevated coulombic efficiency. Overall, this paper develops an understanding of anion and cation effects on the mechanism of electrodeposition and hydrogen co-evolution in concentrated electrolytes in search of improved aqueous media (e.g., concentrated LiCl) for efficient metal electro-synthesis.

Lvovich, William [Case Western Reserve University,↗

DOE OSTI2025

Engineered Barrier System Research Activities at SNL: FY25 Report

This report describes research and development (R&D) activities conducted at Sandia National Laboratories (SNL) during Fiscal Year 2025 (FY25) specifically related to the Engineered Barrier System (EBS) Properties & Processes Work Package in the Spent Fuel and High-Level Waste Disposition (SFHLWD) Campaign supported by the United States (U.S.) Department of Energy (DOE). SNL activities focus on understanding EBS component evolution and interactions within the EBS, as well as interactions between the host media and the EBS. The team represented in this report consists of individuals from SNL, Argonne National Laboratory (Advanced Photon Source), and Vanderbilt University. The activities represented in this report include development of anion sorbent materials for buffer formulations, properties of pure bentonite and bentonite mixtures, and characterization of cement interfaces relevant to the EBS. The SNL EBS activities also leverage interactions with EBS teams from other national laboratories, and international collaborations to ensure that the DOE program is active and abreast of the latest advances in nuclear waste disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

Comparison of GOES16 Data with the TRACER-ESCAPE Field Campaign Dataset for Convection Characterization: A Selection of Case Studies and Lessons Learnt

Convective updrafts are one of the main characteristics of convective clouds, responsible for the convective mass flux and the redistribution of energy and condensate in the atmosphere. During the early stages of their lifecycle, convective clouds experience rapid cloud-top ascent manifested by a decrease in the geostationary IR brightness temperature (𝑇⁢𝐵 𝐼⁢𝑅 ). Under the assumption that the convective cloud top behaves like a black body, the ascent rate of the convective cloud top can be estimated as ($\frac{∂𝑇⁢𝐵_{𝐼⁢𝑅}}{∂𝑡}$), and it can be used to infer the near cloud-top convective updraft. The temporal resolution of the geostationary IR measurements and non-uniform beam-filling effects can influence the convective updraft estimation. However, the main shortcoming until today was the lack of independent verification of the strength of the convective updraft. Here, Doppler radar observations from the ESCAPE and TRACER field experiments provide independent estimates of the convective updraft velocity at higher spatiotemporal resolution throughout the convective core column and can be used to evaluate the updraft velocity estimates from the IR cooling rate for limited samples. Isolated convective cells were tracked with dedicated radar (RHIs and PPIs) scans throughout their lifecycle. Radial Doppler velocity measurements near the convective cloud top are used to provide estimates of convective updrafts. These data are compared with the geostationary IR and VIS channels (from the GOES satellite) to characterize the convection evolution and lifecycle based on cloud-top cooling rates.

TRACER/ESCAPE field campaign↗

DOE OSTI2025

Bulk segregant and QTL analysis of maltose metabolism in Saccharomyces eubayanus

This study investigates natural variation in maltose utilization among Saccharomyces eubayanus strains isolated from different tree hosts. An F2 population was generated from a cross between strain QC18 (Quercus-associated) and strain CL467.1 (Nothofagus-associated). Bulk segregant analysis (BSA) was performed on the F2 offspring, and QTL mapping was conducted by whole-genome sequencing of two pools of 30 segregants each, representing the lowest and highest growth in high maltose concentrations. For QTL analysis, the parental strains QC18 and CL467.1 were also sequenced.

evolutionary plasticity↗

NASA NTRS1985

The University of Wyoming's small scientific balloon program

Over 500 small scientific balloons have been launched by the University of Wyoming's Atmospheric Physics Group from 26 locations over the globe in a study of stratospheric aerosol physics and chemistry which began in 1971. These flighs have led to a basic understanding of the evolution of sulfurous gases, injected into the stratosphere by major volcanic eruptions, into sulfuric acid aerosol droplets. The recent use of new, thin film balloon technology, to reduce cost and simplify launch techniques, has been a major advantage to the program.

Hofmann, D. J.↗

NASA NTRS1991

Statistics of gravitational lenses - The uncertainties

The assumptions in the analysis of gravitational lensing statistics are examined. Special emphasis is given to the uncertainties in the theoretical predictions. It is shown that a simple redshift cutoff model, which may result from galaxy evolution, can significantly reduce the lensing probability and explain the large mean separation of images in observed gravitational lenses. This effect may affect the constraint on the contribution of the cosmological constant to producing a flat universe from the number counts of the observed lenses. For the Omega(0) = 1 (filled beam) model, the lensing probability of early-type galaxies with finite core radii is reduced roughly by a factor of 2 for high-redshift quasars as compared with the corresponding singular isothermal sphere model. The finite core radius effect is about 20 percent for a lambda-dominated flat universe. It is also shown that the most recent galaxy luminosity function gives lensing probabilities that are smaller than previously estimated roughly by a factor of 3.

Mao, Shude↗

NASA NTRS2000

A Coordinated RXTE/ASCA Study of Absorption Dips in Circinus X-1 at Phase Zero

This proposal was for an Rossi X Ray Timing Explorer (RXTE) study of Circinus X-1 with the ASCA satellite for the purpose of studying the iron emission feature during intensity dips. These dips had been discovered previously with ASCA and they appeared to vary in equivalent width and in the energy of the iron K edge. Proper analyses requires good continuum measurements which Rossi X Ray Timing Explorer/Proportional Counter Array (RXTE/PCA) could provide. Also, the PCA data would show any temporal evolution correlated with spectral evolution. RXTE provided 90 ks of data during March 3-5, 1998 which included phase zero which is where the dips usually take place. The ASCA observations were taken by Dr. Neil Brandt of Penn State University. Unfortunately, the source intensity showed far less dipping activity than is typical near phase zero. The light curve exhibited only very narrow sporadic dips rather than some long deep dips necessary for sufficient statistics in the ASCA and RXTE instruments for spectral studies. This prevented us from carrying out the primary goal of the proposal.

Bradt, Hale↗

NASA NTRS2006

Genetic Algorithm for Optimization: Preprocessor and Algorithm

Genetic algorithm (GA) inspired by Darwin's theory of evolution and employed to solve optimization problems - unconstrained or constrained - uses an evolutionary process. A GA has several parameters such the population size, search space, crossover and mutation probabilities, and fitness criterion. These parameters are not universally known/determined a priori for all problems. Depending on the problem at hand, these parameters need to be decided such that the resulting GA performs the best. We present here a preprocessor that achieves just that, i.e., it determines, for a specified problem, the foregoing parameters so that the consequent GA is a best for the problem. We stress also the need for such a preprocessor both for quality (error) and for cost (complexity) to produce the solution. The preprocessor includes, as its first step, making use of all the information such as that of nature/character of the function/system, search space, physical/laboratory experimentation (if already done/available), and the physical environment. It also includes the information that can be generated through any means - deterministic/nondeterministic/graphics. Instead of attempting a solution of the problem straightway through a GA without having/using the information/knowledge of the character of the system, we would do consciously a much better job of producing a solution by using the information generated/created in the very first step of the preprocessor. We, therefore, unstintingly advocate the use of a preprocessor to solve a real-world optimization problem including NP-complete ones before using the statistically most appropriate GA. We also include such a GA for unconstrained function optimization problems.

Sen, S. K.↗

NASA NTRS2020

A Disc-Dominated and Clumpy Circumgalactic Medium of the Milky Way Seen in X-Ray Emission

The Milky Way galaxy is surrounded by a circumgalactic medium (CGM) that may play a key role in galaxy evolution as the source of gas for star formation and a repository of metals and energy produced by star formation and nuclear activity. The CGM may also be a repository for baryons seen in the early universe, but undetected locally. The CGM has an ionized component at temperatures near 2 x 10^6 K studied primarily in the soft X-ray band. Here we report a survey of the southern Galactic sky with a soft X-ray spectrometer optimized to study diffuse soft X-ray emission. The X-ray emission is best fit with a disc-like model based on the radial profile of the surface density of molecular hydrogen, a tracer of star formation, suggesting that the X-ray emission is predominantly from hot plasma produced via stellar feedback. Strong variations in the X-ray emission on angular scales of ~10 degrees indicate that the CGM is clumpy. Addition of an extended, and possibly massive, halo component is needed to match the halo density inferred from other observations.

P Kaaret↗

NASA NTRS2021

Europa Clipper Magnetometer Thermal Design Evolution, Validation, and Verification

Europa Clipper Spacecraft is exposed to a high radiation environment and is limited with power. This makes the thermal design of Europa Clipper magnetometer more challenging. The design is required to be highly insulated and at the same time magnetically clean. This paper describes the thermal design evolution of Europa Clipper Magnetometer. A thermal vacuum test is conducted in Europa Clipper orbit’s relevant environment to characterize the requirements and estimate the power consumption. A flight-like engineering model magnetometer from the University of California at Los Angeles (UCLA) is used for this test. Magnetically clean Cernox temperature measurement sensors with the accuracy of ±0.1ºC are used to measure the temperature value inside the sensor head and across the main frame interfaces. This level of accuracy in temperature measurement is required to capture the temperature gradient across the sensor head in a relevant environment which impacts the magnetometer measurement accuracy. Test data is used to correlate the thermal model and characterize the heat leak across the interfaces. Validated thermal model is used as a verification tool for power consumption and thermal requirements.

Caron, Ryan↗

NASA NTRSDate not supplied

From Research to Reality -- Challenges and Opportunities in Complex System Design

The scope and scale of our interconnected society requires that we view the world through a complex system lens, where numerous parts interact, and emergent behaviors are the norm. Understanding complex systems is critical for decision-making and policy development in domains such as ecological systems, financial markets, supply chains, and global transportation systems, where decision-makers need reliable information to predict the impact of decisions that may play out over decades. Traditional approaches to the research that produces this information are often insufficient, where hypotheses are tested in an isolated environment, and where the results may not carry over to the integrated system. There are a multitude of advancements in system engineering, artificial intelligence, and test and evaluation that are emerging to meet the challenge. Approaches such as agile development, model-based system engineering, design of experiments, large language models, and formal ontologies are providing ways to manage complexity and increase our collective ability to make the changes that we want to see in the world. In this talk I will provide a few examples related to the architecture of the National Airspace System (NAS), where we have investigated the use of large language models, basic formal ontology, and applied category theory to help researchers and system engineers be more effective in this complex design space. Bio: Dr. Ian Levitt’s current research focus is on the complex evolution of the National Airspace System. Prior to joining NASA in 2020, he was with the FAA leading international standards and national laboratory development for the agency. Dr. Levitt earned his PhD in mathematics from Rutgers University in 2009. His mission is to promote a healthy and continuous transformation of society through open information and cooperation.

Ian Levitt↗

DOE OSTI2022

Time Evolution in Quantum Cosmology

The quantum description of time evolution in non-linear gravitational systems such as cosmological space-times is not well understood. We show, in the simplified setting of mini-superspace, that time evolution of this system can be obtained using a gauge fixed path integral, as long as one does not integrate over proper time. Using this gauge fixed action we can construct a Hamiltonian in the coherent - or classical - state basis. We show that by construction the coherent states satisfy the classical dynamical equations of General Relativity. They do not satisfy the Hamiltonian constraint. A consequence of this is that the Wheeler-DeWitt equation should not be satisfied in quantum gravity. Classical states have a natural non-trivial time evolution since they are not eigenstates of the Hamiltonian. A general feature of the unconstrained quantum theory of gravity is the prediction of a pressureless dark matter component of either sign energy density in the classical universe which may lead to novel phenomenology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Concerted Proton–Electron Transfer Minimizes Substituent Effects on Adsorbed Phthalocyanine Electrocatalysis

Molecularly modified electrodes (MMEs) are potent electrocatalysts, but few principles exist for their rational design. Electrocatalysis by soluble molecules depends strongly on substituents that tune the catalyst redox potential (E 1/2 ), but it is unclear if this parameter similarly impacts MME catalysis. Herein, we employ the hydrogen evolution reaction (HER) as a test case for comparing carbon-adsorbed cobalt phthalocyanine (CoPc/C) and cobalt hexadecafluoro-phthalocyanine (CoFPc/C). By correlating HER activity and voltammetric data to total Co surface concentration across a wide range of catalyst loadings, we find that only 5–25% of adsorbed Co sites contribute to the Co(II/I) redox wave and that this subpopulation poorly correlates with catalytic activity. Instead, in the low-loading limit, catalytic activity correlates linearly with the majority Co(II/I)-silent Co population, revealing per-site turnover frequency (TOF) values for HER. Despite a 230 mV difference in Co(II/I) redox potentials, CoPc/C and CoFPc/C display TOF values differing by less than a factor of 3 when compared over a wide potential range. Mechanistic studies point to an inner-sphere concerted proton–electron transfer step as rate-determining, suggesting that the Co–H bond dissociation free energy (BDFE) rather than the Co(II/I) E 1/2 is thermodynamically relevant. Computational studies indicate that the fluoro-substituents lead to compensatory changes in Co(II/I) E 1/2 and Co(I) basicity, leaving the Co–H BDFE largely unchanged between CoPc and CoFPc and thereby manifesting in similar catalytic rates. Furthermore, these results highlight the limited effect of E 1/2 -tuning on MME catalytic activity and motivate the development of methods to directly alter active site–substrate BDFE.

Catalysts↗

DOE OSTI2026

Trigonometric continuous-variable gates and hybrid quantum simulations of the sine-Gordon model

Hybrid qubit-qumode quantum computing platforms provide a natural setting for simulating interacting bosonic quantum field theories. However, existing continuous-variable gate constructions rely predominantly on polynomial functions of canonical quadratures. In this work, we introduce a complementary universality paradigm based on trigonometric continuous-variable gates, which enable a Fourier-like representation of bosonic operators and are particularly well suited for periodic and non-perturbative interactions. We present an ancilla-based framework for implementing trigonometric gates with arguments given by arbitrary Hermitian functions of qumode quadratures. The protocol yields unitary gates deterministically, and non-unitary gates through probabilistic post-selection. As a concrete application, we develop a hybrid qubit-qumode quantum simulation of the lattice sine-Gordon model. Using these gates, we prepare ground states via quantum imaginary-time evolution, simulate real-time dynamics, compute time-dependent vertex two-point correlation functions, and extract quantum kink profiles under topological boundary conditions. Our results demonstrate that trigonometric continuous-variable gates provide a physically natural framework for simulating interacting field theories on near-term hybrid quantum hardware, while establishing a parallel route to universality beyond polynomial gate constructions. We expect that the trigonometric gates introduced here to find broader applications, including quantum simulations of condensed matter systems, quantum chemistry, and biological models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗