Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaporation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evapotranspiration Partitioning of Eucalyptus benthamii and Pinus taeda During Early Stand Development

Increasing demand for bioenergy from intensively managed woody crops raises concerns of increased evapotranspiration and potential decreases in water yield. Pinus taeda (loblolly pine) is currently the most cultivated species in the southeastern USA, the country’s wood basket. However, Eucalyptus species could achieve greater productivity but with unknown ramifications for water budgets. To address the knowledge gap, we determined annual water budgets of loblolly pine and Eucalyptus benthamii (eucalypt) from growing years 3 through 5 in a replicated (n = 3) two-factor design comparing species and groundwater depth. Paired plots were established across a depth-to-groundwater gradient from shallow (~ 2 m) to deep (~ 8 m). Hydrologic budgets were constructed by measuring precipitation, interception, soil evaporation, and transpiration. Eucalypt evapotranspiration and above-ground biomass production for growing years 3 through 5 were on average 25 and 14% greater than pine, respectively; however, evapotranspiration did not differ across groundwater depths. At the end of growing year 5, eucalypt had higher transpiration and evapotranspiration per unit area than pine. Soil evaporation was substantial in young plantations (nearly 500 mm) in growing year 3 but declined as the canopy closed. Partitioning of evapotranspiration components in developing bioenergy plantations was dynamic due to canopy development driven decreases in soil evaporation and increases in transpiration and interception; total evapotranspiration was less variable from year to year. Water use efficiency (WUE, kg biomass/m 3 H 2 O) per unit evapotranspiration was similar between species, but WUE per unit transpiration was higher in pine. As a result, considering total evapotranspiration in young plantations can affect WUE interpretations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Modelling the interlayer bond strength of 3D printed concrete with surface moisture

Highlights: • An analytical model for interlayer adhesion of 3DPC is proposed based on the amount of surface moisture on the interlayer. • For this mix, the model accurately (RMSE=2.5%) predicts the reduction in interlayer adhesion from 30% to 50%. • Internal curing with superabsorbent polymers increases the interlayer adhesion by 10% and flexural strength by 19%. • SAPs also improve the initial thixotropy by 49% and buildability by 25% compared to the reference. Providing additional water to the hydrating cementitious particles is essential to achieve the optimal mechanical performance of the low w/b concrete mixes preferred for 3D printing. This study incorporates superabsorbent polymers (SAP) and additional water in 3D printed concrete (3DPC) to promote the hydration process through delayed internal water release. The study shows that a retentive SAP modifies the rheological development by absorbing the pore fluid for a short period after printing. The absorption-induced stiffening increases the thixotropy and buildability by 49% and 25%, respectively. A retentive SAP increases the flexural strength and interlayer adhesion by 19% and 10%, respectively. This is due to the internal water release that promotes hydration. Evaporation of the interlayer moisture during the pass time has the opposite effect— evaporation reduces the interlayer adhesion. Based on this assumption, an analytical model is proposed. The model accounts for the pass time, bleeding, and the environmental evaporation rate to estimate the surface moisture and predict the lack of interlayer adhesion. In this study, the model accurately (RMSE = 2.5%) predicted an interlayer adhesion reduction from 30% to 50%. The interlayer adhesion results of other studies could also be predicted.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thin hybrid capillary two-phase cooling system

A novel hybrid two-phase cooling system was developed that integrated a mechanically pumped two-phase loop with a capillary-driven two-phase cooling device. The latter cooling mechanism was based on evaporation/boiling from wick structures made by sintering copper particles on the interior surfaces of a copper cold plate. The cold plate provided cooling to two surfaces and each of them included four heaters in series. The novelty of the developed technology was preventing flooding of the evaporator wicks by isolating the evaporation surface from the pumped liquid flow that fed them. This arrangement allowed for a high liquid feed flow rate much greater than would be allowed by a capillary pumped system while maintaining a low thermal resistance at the evaporation surface. Using this approach, the cooling system removed over 850 W with a low pumping power below 1.0 W while using R245fa as the working fluid. The equivalent heat fluxes exceeded 970 W/cm 2 over areas less than 0.12 cm 2 . The measured thermal resistance was as low as 0.09 K-cm 2 /W. The presented thermal management solution enables an increase in the power of high heat flux electronic devices beyond the state-of-the-art.

42 ENGINEERING↗
DOE OSTI2020

Combining Mass Spectrometry of Picoliter Samples with a Multicompartment Electrodynamic Trap for Probing the Chemistry of Droplet Arrays

Single droplet levitation provides contactless access to the microphysical and chemical properties of micrometer-sized samples. Most applications of droplet levitation to chemical and biological systems use nondestructive optical techniques to probe droplet properties. To provide improved chemical specificity, we coupled a multicompartment quadrupole electrodynamic trap (QET) with single droplet mass spectrometry. Our QET continuously traps a monodisperse droplet population (tens to hundreds of droplets) and allows for the simultaneous sizing of a single droplet using its Mie scattering pattern. Single droplets are subsequently ejected into the ionization region of an ambient pressure inlet mass spectrometer. We optimized two complementary soft ionization techniques for picoliter aqueous droplets: (1) paper spray (PS) ionization and (2) thermal desorption glow discharge (TDGD) ionization. Both techniques detect oxygenated organic acids in single droplets, with signal-to-noise ratios >100 and detection limits on the order of 10 pg. Sensitivity and reproducibility across single droplets are driven by the droplet deposition location and spray stability in PS-MS and the ionization region humidity and analyte evaporation rate in TDGD-MS. Importantly, the analyte evaporation rate can control the TDGD-MS quantitative capability because high evaporation rates result in significant ion suppression. Additionally, this effect is mitigated by optimizing the vaporization temperature, droplet size range, and analyte volatility. We demonstrate quantitative and reproducible measurements with a droplet internal standard (<10% RSD) and compare the sensitivity of PS-MS and TDGD-MS. Finally, we demonstrate the application of QET-MS to the study of heterogeneous chemical kinetics with the reaction of gas phase O 3 and aqueous maleic acid droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Experiments on the Capillary Condensation/Evaporation Hysteresis of Pure Fluids and Binary Mixtures in Cylindrical Nanopores

Here, a new experimental method, i.e., isochoric cooling/heating cycle measurement using differential scanning calorimeter (DSC), is applied to investigate the hysteretic phenomenon of pure components and mixtures confined in two different types of cylindrical nanopores (SBA-15 and KIT-6). The capillary condensation/evaporation hysteresis end point (T he ) for a specific system is determined by performing a series of measurements with different densities by increasing initial temperature and pressure. We confirm that for a pure component, T he is lower when confined in smaller nanopores, whereas T he for CH 4 /CO 2 and CH 4 /C 2 H 6 mixtures at the specific composition investigated are higher than that of pure CO 2 and C 2 H 6 , respectively, when confined in the same nanopores. To the best of our knowledge, this is the first time that T he of fluid mixture is experimentally studied, which further demonstrates that binary mixtures behave similarly to pure fluids when confined in nanoporous media. At low temperatures where hysteresis is observed, the shape as well as the duration of the exothermic peak (due to capillary condensation) and endothermic peak (due to capillary evaporation) indicate that capillary condensation, rather than capillary evaporation, takes place at/near a thermodynamic equilibrium. Within the accuracy of the measurements, we find that the total heat of capillary condensation is identical to that of capillary evaporation for all systems examined, regardless of the presence of hysteresis. By comparing the heat per unit volume among different systems, we also find that the heat per unit volume of the phase transition of confined pure fluid is lower than that of bulk, which further demonstrates that the molar density of confined pure liquid is less than that of bulk pure liquid at saturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Zero Liquid Discharge and Water Reuse in Recirculating Cooling Towers at Power Facilities: Review and Case Study Analysis

Zero liquid discharge (ZLD) systems installed at power facilities with the primary purpose of meeting water discharge regulations have the added benefit of providing high quality effluent that can be reused in the facility. This paper provides a review of water use in power sector recirculating cooling towers and a baseline assessment of on-site water reuse at natural gas combined cycle (NGCC) power facilities. Two NGCC facilities with reverse-osmosis (RO) or brine-concentrator processes followed by evaporation ponds were selected as case studies; data from these facilities were used to quantify the water, energy, and cost implications of implementing conventional and emerging ZLD technologies. At one case study facility, model results show that implementation of ZLD would reduce water withdrawals by 18%, which is less than savings associated with implementation of dry cooling but comparable to current efforts to reduce water withdrawals by increasing cycles of concentration. Implementation of ZLD using high-recovery RO resulted in a doubling of the levelized cost of water (LCOW). LCOW increased more when a brine concentrator was used. For both case studies, the ZLD system using high-recovery RO required less than 0.1% of a facilitiy's annual electricity generation and the ZLD system using a brine concentrator process required less than 0.8%. Additionally, increasing the evaporation pond area to minimize required ZLD system recovery rates and reduce system electricity costs does not reduce the LCOW. Instead, the LCOW increases because less water is recovered and more water is lost to evaporation. Furthermore, if water availability decreases or water competition/cost increases, facilities may be incentivized to maximize water recovery from ZLD systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Modeling Solution Drying by Moving a Liquid-Vapor Interface: Method and Applications

A method of simulating the drying process of a soft matter solution with an implicit solvent model by moving the liquid-vapor interface is applied to various solution films and droplets. For a solution of a polymer and nanoparticles, we observe “polymer-on-top” stratification, similar to that found previously with an explicit solvent model. Furthermore, “polymer-on-top” is found even when the nanoparticle size is smaller than the radius of gyration of the polymer chains. For a suspension droplet of a bidisperse mixture of nanoparticles, we show that core-shell clusters of nanoparticles can be obtained via the “small-on-outside” stratification mechanism at fast evaporation rates. “Large-on-outside” stratification and uniform particle distribution are also observed when the evaporation rate is reduced. Polymeric particles with various morphologies, including Janus spheres, core-shell particles, and patchy particles, are produced from drying droplets of polymer solutions by combining fast evaporation with a controlled interaction between the polymers and the liquid-vapor interface. Our results validate the applicability of the moving interface method to a wide range of drying systems. The limitations of the method are pointed out and cautions are provided to potential practitioners on cases where the method might fail.

36 MATERIALS SCIENCE↗
NASA NTRS2009

Combined Modeling of Acceleration, Transport, and Hydrodynamic Response in Solar Flares: The Numerical Model - 1

Acceleration and transport of high-energy particles and fluid dynamics of atmospheric plasma are interrelated aspects of solar flares, but for convenience and simplicity they were artificially separated in the past. We present here self consistently combined Fokker-Planck modeling of particles and hydrodynamic simulation of flare plasma. Energetic electrons are modeled with the Stanford unified code of acceleration, transport, and radiation, while plasma is modeled with the Naval Research Laboratory flux tube code. We calculated the collisional heating rate directly from the particle transport code, which is more accurate than those in previous studies based on approximate analytical solutions. We repeated the simulation of Mariska et al. with an injection of power law, downward-beamed electrons using the new heating rate. For this case, a -10% difference was found from their old result. We also used a more realistic spectrum of injected electrons provided by the stochastic acceleration model, which has a smooth transition from a quasi-thermal background at low energies to a non thermal tail at high energies. The inclusion of low-energy electrons results in relatively more heating in the corona (versus chromosphere) and thus a larger downward heat conduction flux. The interplay of electron heating, conduction, and radiative loss leads to stronger chromospheric evaporation than obtained in previous studies, which had a deficit in low-energy electrons due to an arbitrarily assumed low-energy cutoff. The energy and spatial distributions of energetic electrons and bremsstrahlung photons bear signatures of the changing density distribution caused by chromospheric evaporation. In particular, the density jump at the evaporation front gives rise to enhanced emission, which, in principle, can be imaged by X-ray telescopes. This model can be applied to investigate a variety of high-energy processes in solar, space, and astrophysical plasmas.

STOCHASTIC ACCELERATION MODEL↗
NASA NTRS2018

Attribution of Flux Partitioning Variations Between Land Surface Models over the Continental U.S.

Accurate quantification of the terrestrial evapotranspiration (ET) components of plant transpiration (T), soil evaporation (E) and evaporation of the intercepted water (I) is necessary for improving our understanding of the links between the carbon and water cycles. Recent studies have noted that, among the modeled estimates, large disagreements exist in the relative contributions of T, E and I to the total ET. As these models are often used in data assimilation environments for incorporating and extending ET relevant remote sensing measurements, understanding the sources of inter-model differences in ET components is also necessary for improving the utilization of such remote sensing measurements. This study quantifies the contributions of two key factors explaining inter-model disagreements to the uncertainty in total ET: (1) contribution of the local partitioning and (2) regional distribution of ET. The analysis is conducted by using outputs from a suite of land surface models in the North American Land Data Assimilation System (NLDAS) configuration. For most of these models, transpiration is the dominant component of the ET partition. The results indicate that the uncertainty in local partitioning dominates the inter-model spread in modeled soil evaporation E. The inter-model differences in T are dominated by the uncertainty in the distribution of ET over the Eastern U.S. and the local partitioning uncertainty in the Western U.S. The results also indicate that uncertainty in the T estimates is the primary driver of total ET errors. Over the majority of the U.S., the contribution of the two factors of uncertainty to the overall uncertainty is non-trivial.

uncertainty↗
NASA NTRS2018

Attribution of Flux Partitioning Variations Between Land Surface Models Over the Continental U.S.

Accurate quantification of the terrestrial evapotranspiration (ET) components of plant transpiration (T), soil evaporation (E) and evaporation of the intercepted water (I) is necessary for improving our understanding of the links between the carbon and water cycles. Recent studies have noted that, among the modeled estimates, large disagreements exist in the relative contributions of T, E and I to the total ET. As these models are often used in data assimilation environments for incorporating and extending ET relevant remote sensing measurements, understanding the sources of inter-model differences in ET components is also necessary for improving the utilization of such remote sensing measurements. This study quantifies the contributions of two key factors explaining inter-model disagreements to the uncertainty in total ET: (1) contribution of the local partitioning and (2) regional distribution of ET. The analysis is conducted by using outputs from a suite of land surface models in the North American Land Data Assimilation System (NLDAS) configuration. For most of these models, transpiration is the dominant component of the ET partition. The results indicate that the uncertainty in local partitioning dominates the inter-model spread in modeled soil evaporation E. The inter-model differences in T are dominated by the uncertainty in the distribution of ET over the Eastern U.S. and the local partitioning uncertainty in the Western U.S. The results also indicate that uncertainty in the T estimates is the primary driver of total ET errors. Over the majority of the U.S., the contribution of the two factors of uncertainty to the overall uncertainty is non-trivial.

evapotranspiration partitioning; transpiration; so↗
DOE OSTI2024

Environmental and economic analyses of chemical recycling via dissolution of waste polyethylene terephthalate

Globally, more than 1000 organizations and 175 nations are facing the plastic waste problem and have realized the need to transition from “linear-to-circular” economy of plastics. While the current mechanical recycling technologies for plastics are struggling to increase the U.S. plastic recycling rates beyond 9%, chemical recycling technologies become important complementary technologies to the predominant mechanical recycling that are needed to realize the circular economy in plastics supply chains. Dissolution is one such chemical recycling technology that can recycle waste plastic back into high-quality virgin grade plastic. However, the environmental and economic impacts of chemical recycling of waste polyethylene terephthalate (PET) via dissolution technology using a green solvent are unknown. Our study evaluated environmental metrics such as greenhouse gas (GHG) emissions and cumulative energy demand, and economic metrics such as net present value (NPV), minimum selling price, payback period, return on investment, and discounted internal rate of return for three dissolution processes with polymer recovery via anti-solvent, evaporation, and cooling precipitation techniques. The dissolution process with evaporation technique was the most economically favorable, whereas that with cooling technique was the most environmentally favorable. The anti-solvent approach had low economic performance and the highest environmental impacts. The NPV for all of these technologies ranged from $2.67 MM to $10.93 MM for a capacity of 8,400 MT/year and was found to be the highest for dissolution with evaporation approach and the least for anti-solvent approach. The cradle-to-gate GHG emissions and energy demand for PET dissolution processes ranged from 1.33-3.77 kg CO2-eq/kg of chemically recycled (CR) PET and18.9-56.1 MJ/kg of CR-PET, respectively. These economic and environmental metrics will be helpful in evaluating the sustainability of circular PET supply chains in the U.S.

09 BIOMASS FUELS↗
DOE OSTI2024

Iodine Modulates the MACl‐Assisted Growth of FAPbI 3 for High Efficiency Perovskite Solar Cells

The preferential growth of α-phase formamidinium perovskite (α-FAPbI 3 ) at low temperatures can be achieved with the incorporation of chloride-based additives, with methylammonium chloride (MACl) being the most common example. However, compared to other less-volatile chloride additives, MACl only remains in the growing perovskite film for a short time before evaporating during annealing, primarily influencing the early stages of film formation. In addition, evaporation of MACl as methylamine (MA 0 ) and HCl can introduce a side reaction between MA 0 and formamidinium (FA), undermining the compositional purity and phase stability of α-FAPbI 3 . In this study, it is demonstrated that addition of iodine (I 2 ) into the FAPbI 3 precursor solution containing MACl suppresses the MA-FA side reaction during annealing. Additionally, MACl evaporation is delayed owing to strong interaction with triiodide. The added I 2 facilitates spontaneous growth of α-FAPbI 3 prior to annealing, with an improved bottom morphology due to the formation of fewer byproducts. Perovskite solar cells derived from an I 2 -incorporated solution deliver a champion power conversion efficiency of 25.2% that is attributed to suppressed non-radiative recombination.

14 SOLAR ENERGY↗
DOE OSTI2021

A dynamical mechanism for the Page curve from quantum chaos

If the evaporation of a black hole formed from a pure state is unitary, the entanglement entropy of the Hawking radiation should follow the Page curve, increasing from zero until near the halfway point of the evaporation, and then decreasing back to zero. The general argument for the Page curve is based on the assumption that the quantum state of the black hole plus radiation during the evaporation process is typical. In this paper, we show that the Page curve can result from a simple dynamical input in the evolution of the black hole, based on a recently proposed signature of quantum chaos, without resorting to typicality. Our argument is based on what we refer to as the “operator gas” approach, which allows one to understand the evolution of the microstate of the black hole from generic features of the Heisenberg evolution of operators. One key feature which leads to the Page curve is the possibility of dynamical processes where operators in the “gas” can “jump” outside the black hole, which we refer to as void formation processes. Such processes are initially exponentially suppressed, but dominate after a certain time scale, which can be used as a dynamical definition of the Page time. In the Hayden-Preskill protocol for young and old black holes, we show that void formation is also responsible for the transfer of information from the black hole to the radiation. We conjecture that void formation may provide a microscopic explanation for the recent semi-classical prescription of including islands in the calculation of the entanglement entropy of the radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

On quantum information before the Page time

While recent progress in the black hole information problem has shown that the entropy of Hawking radiation follows a unitary Page curve, the quantum state of Hawking radiation prior the Page time is still treated as purely thermal, containing no information about the microstructure of the black hole. We demonstrate that there is significant quantum information regarding the quantum state of the black hole in the Hawking radiation prior to the Page time. By computing of the quantum fidelity in a 2D boundary conformal field theory (BCFT) model of black hole evaporation, we demonstrate that an observer outside of an evaporating black hole may distinguish different black holes via measurements of the Hawking radiation at any time during the evaporation process, albeit with an exponentially large number of measurements. Furthermore, our results are universal, applicable to general BCFTs including those with large central charge and rational BCFTs. The techniques we develop for computing the fidelity are more generally applicable to excited states in CFT. As such, we are able to characterize more general aspects of thermalization in 2D conformal field theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Entanglement wedge reconstruction and the information paradox

When absorbing boundary conditions are used to evaporate a black hole in AdS/CFT, we show that there is a phase transition in the location of the quantum Ryu-Takayanagi surface, at precisely the Page time. The new RT surface lies slightly inside the event horizon, at an infalling time approximately the scrambling time β/2 π logS BH into the past. We can immediately derive the Page curve, using the Ryu-Takayanagi formula, and the Hayden-Preskill decoding criterion, using entanglement wedge reconstruction. Because part of the interior is now encoded in the early Hawking radiation, the decreasing entanglement entropy of the black hole is exactly consistent with the semiclassical bulk entanglement of the late-time Hawking modes, despite the absence of a firewall.By studying the entanglement wedge of highly mixed states, we can understand the state dependence of the interior reconstructions. A crucial role is played by the existence of tiny, non-perturbative errors in entanglement wedge reconstruction. Directly after the Page time, interior operators can only be reconstructed from the Hawking radiation if the initial state of the black hole is known. As the black hole continues to evaporate, reconstructions become possible that simultaneously work for a large class of initial states. Using similar techniques, we generalise Hayden-Preskill to show how the amount of Hawking radiation required to reconstruct a large diary, thrown into the black hole, depends on both the energy and the entropy of the diary. Finally we argue that, before the evaporation begins, a single, state-independent interior reconstruction exists for any code space of microstates with entropy strictly less than the Bekenstein-Hawking entropy, and show that this is sufficient state dependence to avoid the AMPSS typical-state firewall paradox.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Moisture sources for precipitation variability over the Arabian Peninsula

Abstract We apply the Lagrangian-based moisture back trajectory method to two reanalysis datasets to determine the moisture sources for wet season precipitation over the Arabian Peninsula, defined as land on the Asian continent to the south of the Turkish border and west of Iran. To accomplish this, we make use of the evaporative source region between 65°W–120°E and 30°S–60°N, which is divided into twelve sub-regions. Our comparison of reanalyses and multiple observations allows us to validate datasets and highlight broad-scale similarities in characteristics, notwithstanding some inconsistencies in the southwest AP. The results indicate north-to-south spatiotemporal heterogeneity in the characteristics of dominant moisture sources. In the north, moisture for precipitation is mainly sourced from midlatitude land and water bodies, such as the Mediterranean and Caspian Seas. Areas further south are dependent on moisture transport from the Western Indian Ocean and parts of the African continent. The El Niño-Southern Oscillation (ENSO) exhibits an overall positive but sub-seasonally varying influence on the precipitation variability over the region, with noticeable moisture anomalies from all major source regions. A significant drying trend exists over parts of the Peninsula, which both reanalyses partially attribute to anomalies in the moisture advection from the Congo Basin and South Atlantic Ocean. However, considerable uncertainty in evaporation trends over the terrestrial evaporative sources in observations warrants additional modeling studies to further our understanding of key processes contributing to the negative trends.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Active Lithium Injection for a Real Time Control of the Divertor Heat Flux for Fusion Devices

When the local heat flux exceeds specified flux limit, tungsten PFC surfaces can be damaged, which is not acceptable for a reliable reactor operations. The divertor PFCs are typically designed for a specific heat flux limit usually assuming an average steady-state heat flux which is typically 5–10 MW/m 2 . However, in addition to steady-state heat flux, fusion reactor divertor PFCs could experience transient heat fluxes such as ELMs and/or other magnetic reconnection events which can deposit large transient heat fluxes onto the divertor PFCs. The transient divertor heat flux could be significantly larger than the steady-state heat flux which could damage the solid PFC surfaces. The divertor heat flux can be subjected to additional complications such as the uncertainties in the the divertor strike point heat flux projection. Moreover, there are additional experimental observations of non-axisymmetric power flux which can occur under non-axisymmetric magnetic perturbations. The liquid lithium (LL) PFCs is more resilient against such transient heat fluxes as they could evaporate LL as needed and the lost LL can be then replenished afterward. In this paper, we analyze a case for a transient divertor heat pulse of 1 MJ in 10 ms for a ITER-size reactor. This is a small perturbation (~ 0.1%) to the expected plasma stored energy compared to the previously analyzed case of 20 MJ heat pulse. Even with this relatively modest heat pulse, the LL surface undergoes ~ 100 °C temperature rise. However, the resulting LL surface heating without rapid cooldown mechanism could lead to excessive LL evaporation continuing well after the transient heat flux resulting in a significant Li injection of ~ 0.6 mol in about a 200 ms period. This amount of Li injection could cause plasma dilution and performance degradation. On the other hand, an active Li injection capability if optimized could prevent the LL surface temperature rise and thus reducing subsequent Li evaporation into the plasma by a factor of 7 compared to the passive LL PFC case. A crucial tool of active Li injection is a rapid response pellet injector which could inject light impurity pellets before the excessive heat flux could reach the divertor plate causing serious damage. A simple pellet ablation model suggests a favorable pellet deposition profile for smaller ~ 0.1 mm radius pellet with ~ 10–20 m/s velocity. Moreover, if it is possible to inject from the private flux region, the pellet injection efficiency into the high heat flux strike point region can be as high as 80% compared to ~ 50% for the injection from outer radius region. The pellet deposition efficiency can be further improved by designing a shell-pellet which can burst when a certain ablation fraction is reached. Finally, a possible implementation technique using an inductive pellet injector with a rapid time response of a few msec is proposed here which can be tested in NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

SIMS and HR-XPS characterization of lithiated graphite from the magnetic fusion device RFX-mod

Lithium wall conditioning has improved the performance of many magnetic fusion devices. Li conditioning in the RFX-mod device was performed by: (1) a single Li pellet injector and (2) a multi-Li pellet injector during He plasma discharges; (3) a Li evaporator after He glow discharge cleaning and He plasma discharge exposure. This report compares the spatial and depth distributions of Li deposited on polycrystalline graphite witness samples at different locations in RFX-mod and the elemental and chemical compositions of the resulting surfaces. The sample surfaces were analyzed ex situ using secondary ion mass spectrometry (SIMS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS). The results showed that Li pellet injection provided a relatively uniform toroidal coverage while Li evaporation produced highly localized Li deposition. A Li 1s HR-XPS peak at 56.5 eV binding energy (BE) characteristic of lithium-intercalated graphite was only observed with the sample exposed to Li evaporation. All of the samples exhibited a HR-XPS C 1s peak at 285.1–285.2 eV BE that is largely attributed to hydrogenated graphite. This finding suggests that hydrogenation of fresh graphite occurs during He plasma discharge exposures. Finally, our results have implications for density control and the selection of Li conditioning techniques in magnetic fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗