Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “driving range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Io - Energy constraints and plume volcanism

Observational and theoretical considerations, including near-surface energy constraints, suggest a model of Io that features a surface layer of sulfur overlying an active silicate crust. Such a model would imply frequent contact between silicate magma intrusions and the sulfur layer. This contact could produce volcanic plumes driven by high-temperature sulfur vapor. Plumes driven by sulfur vapor meet observational constraints for a wide range of possible conditions, in contrast to the special conditions required for plume generation by SO2. Characteristics of the two models are compared, and it is suggested that high-spatial-resolution infrared radiometry could identify the driving volatile.

Reynolds, R. T.↗
NASA NTRS1981

Kaman 40 kW wind turbine generator - control system dynamics

The generator design incorporates an induction generator for application where a utility line is present and a synchronous generator for standalone applications. A combination of feed forward and feedback control is used to achieve synchronous speed prior to connecting the generator to the load, and to control the power level once the generator is connected. The dynamics of the drive train affect several aspects of the system operation. These were analyzed to arrive at the required shaft stiffness. The rotor parameters that affect the stability of the feedback control loop vary considerably over the wind speed range encountered. Therefore, the controller gain was made a function of wind speed in order to maintain consistent operation over the whole wind speed range. The velocity requirement for the pitch control mechanism is related to the nature of the wind gusts to be encountered, the dynamics of the system, and the acceptable power fluctuations and generator dropout rate. A model was developed that allows the probable dropout rate to be determined from a statistical model of wind gusts and the various system parameters, including the acceptable power fluctuation.

Perley, R.↗
NASA NTRS1992

A new angle on lunar ferroan-suite differentiation

Small fragments of rock found among soil particles in sample 67513 from Station 11 on the southern rim of North Ray Crater at Apollo 16 yield information regarding the mafic, ferroan rocks from which they drive. We have identified a set of particles that have distinctive trace element geochemistry and whose bulk and mineral compositions indicate a genetic relationship to one another. These include polymict as well as monomict lithologies. Igneous members range from fragments with abundant anorthite to some with abundant exsolved pigeonite and augite. Consideration of this set of rock fragments, combined with mafic ferroan clasts from large breccias and from lunar-highlands meteorites suggests that there may be separate differentiation trends within the ferroan suite which are subparallel and which are less steem in Fe-Mg vs. An fractionation that the vertical trend obtained when the entire ferroan suite is taken together. This may result from a complex magma system with isolated reservoirs or separate, independently evolving magmas. Mineral compositional and textural variations are consistent with a model set forth by Longhi and Boudreau wherein the anorthite-rich samples reflect adcumulus growth with mafic crystals forming only from trapped liquid, and the more mafic samples by anorthite and pyroxene orthocumulate development.

Jolliff, B. L.↗
NASA NTRS1991

Arcsecond grating drive mechanism for operation at 4 K

A grating drive mechanism that achieves arcsecond positional control at both room temperature and 4 K is described. The mechanism accommodates eight equally spaced facets on a 360-deg drum, with each facet having arcsecond control over an angular range of +/-3 deg. The cryogenic portion consists of dry lubricated angular contact bearings, a dc brushless torque motor, and a compact magnetic position sensor capable of less than 1 arcsec rms resolution. Test results demonstrate angular repeatability of less than 2 arcsec rms at 4 K and static power dissipation to the helium bath of less than 100 microW.

Downey, C. H.↗
NASA NTRS1992

An X-band spacecraft transponder for deep space applications - Design concepts and breadboard performance

The design concepts and measured performance characteristics are summarized of an X band (7162 MHz/8415 MHz) breadboard deep space transponder (DSP) for future spacecraft applications, with the first use scheduled for the Comet Rendezvous Asteroid Flyby (CRAF) and Cassini missions in 1995 and 1996, respectively. The DST consists of a double conversion, superheterodyne, automatic phase tracking receiver, and an X band (8415 MHz) exciter to drive redundant downlink power amplifiers. The receiver acquires and coherently phase tracks the modulated or unmodulated X band (7162 MHz) uplink carrier signal. The exciter phase modulates the band (8415 MHz) downlink signal with composite telemetry and ranging signals. The receiver measured tracking threshold, automatic gain control, static phase error, and phase jitter characteristics of the breadboard DST are in good agreement with the expected performance. The measured results show a receiver tracking threshold of -158 dBm and a dynamic signal range of 88 dB.

Mysoor, Narayan R.↗
NASA NTRS1992

The Software Engineering Laboratory: An operational software experience factory

For 15 years, the Software Engineering Laboratory (SEL) has been carrying out studies and experiments for the purpose of understanding, assessing, and improving software and software processes within a production software development environment at NASA/GSFC. The SEL comprises three major organizations: (1) NASA/GSFC, Flight Dynamics Division; (2) University of Maryland, Department of Computer Science; and (3) Computer Sciences Corporation, Flight Dynamics Technology Group. These organizations have jointly carried out several hundred software studies, producing hundreds of reports, papers, and documents, all of which describe some aspect of the software engineering technology that was analyzed in the flight dynamics environment at NASA. The studies range from small, controlled experiments (such as analyzing the effectiveness of code reading versus that of functional testing) to large, multiple project studies (such as assessing the impacts of Ada on a production environment). The organization's driving goal is to improve the software process continually, so that sustained improvement may be observed in the resulting products. This paper discusses the SEL as a functioning example of an operational software experience factory and summarizes the characteristics of and major lessons learned from 15 years of SEL operations.

Basili, Victor R.↗
NASA NTRS1959

Materials Problems in Chemical Liquid-Propellant Rocket Systems

With the advent of the space age, new adjustments in technical thinking and engineering experience are necessary. There is an increasing and extensive interest in the utilization of materials for components to be used at temperatures ranging from -423 to over 3500 deg F. This paper presents a description of the materials problems associated with the various components of chemical liquid rocket systems. These components include cooled and uncooled thrust chambers, injectors, turbine drive systems, propellant tanks, and cryogenic propellant containers. In addition to materials limitations associated with these components, suggested research approaches for improving materials properties are made. Materials such as high-temperature alloys, cermets, carbides, nonferrous alloys, plastics, refractory metals, and porous materials are considered.

Gilbert, L. L.↗
NASA NTRS2010

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe coronal mass ejections (CMEs) a in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approximately 1.5Rs (solar radii), which coincides with the distance at which the Alfv?n speed profile has a minimum value. We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfv?n speed peaks (?3Rs ? 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approximately 1.5 Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2 Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Gopalswamy, N.↗
NASA NTRS2009

Relation Between Type II Bursts and CMEs Inferred from STEREO Observations

The inner coronagraph (COR1) of the Solar Terrestrial Relations Observatory (STEREO) mission has made it possible to observe CMEs in the spatial domain overlapping with that of the metric type II radio bursts. The type II bursts were associated with generally weak flares (mostly B and C class soft X-ray flares), but the CMEs were quite energetic. Using CME data for a set of type II bursts during the declining phase of solar cycle 23, we determine the CME height when the type II bursts start, thus giving an estimate of the heliocentric distance at which CME-driven shocks form. This distance has been determined to be approx. 1.5Rs (solar radii), which coincides with the distance at which the Alfven speed profile has a minimum value.We also use type II radio observations from STEREO/WAVES and Wind/WAVES observations to show that CMEs with moderate speed drive either weak shocks or no shock at all when they attain a height where the Alfven speed peaks (approx. 3Rs - 4Rs). Thus the shocks seem to be most efficient in accelerating electrons in the heliocentric distance range of 1.5Rs to 4Rs. By combining the radial variation of the CME speed in the inner corona (CME speed increase) and interplanetary medium (speed decrease) we were able to correctly account for the deviations from the universal drift-rate spectrum of type II bursts, thus confirming the close physical connection between type II bursts and CMEs. The average height (approx 1.5Rs) of STEREO CMEs at the time of type II bursts is smaller than that (2.2Rs) obtained for SOHO (Solar and Heliospheric Observatory) CMEs. We suggest that this may indicate, at least partly, the density reduction in the corona between the maximum and declining phases, so a given plasma level occurs closer to the Sun in the latter phase. In two cases, there was a diffuse shock-like feature ahead of the main body of the CME, indicating a standoff distance of 1Rs - 2Rs by the time the CME left the LASCO field of view.

Solar Energetic Particles↗
NASA NTRS2022

NASA's Next Generation of Atmospheric Data Science

The Multi-Angle Imager for Aerosols (MAIA) and the Tropospheric Emission: Monitoring of Pollution(TEMPO) are NASA’s next-generation satellite missions for air quality monitoring. These missions will produce high-quality, high-resolution air quality data to support cross-displinary research. The MAIA mission is collaborating with health science researchers and epidemiologists to study the impacts of air quality on health outcomes. TEMPO aims to improve our understanding of tropospheric air pollution chemistry and our ability to make predictions about air quality and climate forcing. TEMPO will offer hourly measurements of tropospheric ozone, aerosols, and clouds focused on North America at high-spatial resolution, while MAIA will produce high-resolution measurements of speciated particulate matter targeting densely populated cities around the globe. Data from these missions will help improve our understanding of the sources, types, and interactions among the aerosols and trace gases that are polluting Earth’s atmosphere, as well as our understanding of the impact of air pollution on pollution on a wide range of important areas including human health, agriculture, weather, and climate change. The challenges of cross-disciplinary research, computationally expensive multi-variate analyses, and high-resolution data at both local and global scales are driving substantial changes across all of NASA’s Distributed Active Archive Centers (DAACs). High resolution data at scales such these requires a new approach to data ingest, archive, and publication. Like other NASA DAACs, the Atmospheric Science Data Center (ASDC), the DAAC that will be responsible for publishing MAIA and TEMPO data products has historically archived and distributed data on premise. DAACs of the future will archive and distribute data in the cloud, enabling them to remake themselves as research-focused data centers that will support on-demand, data-intensive computations for highly accurate retrospective analyses and predictions. Under the new paradigm, data formats and metadata must support on-demand spatial and temporal sub-setting, as well as other data transformation services such as re-gridding and re-sampling. This presentation will discuss work being done to address data formatting and metadata requirements in this dynamic new environment. In addition to the changes in data stewardship practices at the ASDC, the increased focus on supporting scientific research is driving changes in the relationship between DAACs and researchers. While the ASDC will continue to provide first rate data management and stewardship, it is increasingly focused on serving as a partner not only to the science teams that gather and produce the data it publishes, but to the researchers that use that data.

Beth Huffer↗
DOE OSTI2020

Multi-Scale Thermal Analysis for Design of SiC-Based Medium Voltage Motor Drive: Preprint

This paper describes a multi-scale thermal analysis approach for the design of an air-cooled 1.7-kV SiC MOSFET-based medium-voltage variable-speed motor drive. The National Renewable Energy Laboratory supported the project objectives by providing thermal management design support to the project partner The Ohio State University (OSU). The scope of the models and limited resources required efficient and flexible thermal models to be developed. Two modeling techniques are described that significantly reduced model run time and enabled more complex models to be run faster while retaining needed accuracy. The first technique uses the effectiveness-NTU method to extract convection boundary conditions from a computational fluid dynamics (CFD) model that can be applied to a fast-running finite element analysis model. The second is a porous media technique that enables system-level CFD simulations that incorporate effects from heat exchangers (e.g., pin fin heat sinks) that run in a fraction of the time required for fully resolved CFD simulations. The multi-scale approach to the thermal analysis enabled fast and accurate simulation for the converter design ranging from the die level up to the full system with 36 submodules. The modeling results were validated against experimental data from system tests performed by OSU.

DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Nonlinear post-compression in multi-pass cells in the mid-IR region using bulk materials

We numerically investigate the regime of nonlinear pulse compression at mid-IR wavelengths in a multi-pass cell (MPC) containing a dielectric plate. This post-compression setup allows for ionization-free spectral broadening and self-compression while mitigating self-focusing effects. We find that self-compression occurs for a wide range of MPC and pulse parameters and derive scaling rules that enable its optimization. We also reveal the solitonic dynamics of the pulse propagation in the MPC and its limitations and show that spatiotemporal/spectral couplings can be mitigated for appropriately chosen parameters. In addition, we reveal the formation of spectral features akin to quasi-phase matched degenerate four-wave mixing. Finally, we present two case studies of self-compression at 3-μm and 6-μm wavelengths using pulse parameters compatible with driving high-field physics experiments. The simulations presented in this paper set a framework for future experimental work using few-cycle pulses at mid-IR wavelengths.

Carlson, D. (ORCID:0000000346836463)↗
DOE OSTI2022

Molecular Driving Force for Facet Selectivity of Sequence-Defined Amphiphilic Peptoids at Au–Water Interfaces

Shape-controlled colloidal nanocrystal syntheses often require facet-selective solution-phase chemical additives to regulate surface free energy, atom addition/migration fluxes or particle attachment rates. Because of their highly tunable properties and robustness to a wide range of experimental conditions, peptoids represent a very promising class of next generation functional additives for control over nanocrystal growth. However, understanding the origin of facet selectivity at the molecular level is critical to generalizing their design. In this work, we employ molecular dynamics simulations and biased sampling methods and report stronger selectivity to Au(111) than to Au(100) for Nce3Ncp6, a peptoid that has been shown to assist the formation of five-fold twinned Au nanostars. We find that facet-selectivity is achieved through synergistic effects of both peptoid-surface and solvent-surface interactions. Moreover, the amphiphilic nature of Nce3Ncp6 together with the order of peptoid-peptoid and peptoid-surface binding energies, i.e., peptoid-Au(100) < peptoid-peptoid < peptoid-Au(111), further amplifies its distinct collective behavior on different Au surfaces. Our studies provide a fundamental understanding of the molecular origin of facet-selective adsorption and highlight the possibility of future designs and uses of sequence-defined peptoids for predictive syntheses of nanocrystals with designed shapes and properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Oscillatory and Collective Dynamics of Gold‐Nanoparticle‐Laden Droplets Driven by Photothermal‐Induced Thermocapillarity

Droplets have long intrigued researchers due to their ability to exhibit complex and fascinating behavior when subjected to external stimuli. Here, a coupled oscillatory behavior of gold-nanoparticle-surfactant-laden aqueous droplets is investigated at an oil-oil interface stimulated by light. This study shows that the interaction between light and the droplets gives rise to a range of oscillatory modes, including bouncing and clustering, where droplets exhibit collective movement. From experiment and numerical simulations, this study elucidates the underlying mechanism: upon laser irradiation, gold nanoparticles convert light into heat, generating asymmetric thermal gradients that drive upward thermocapillary flows and a hydrodynamic force from photothermal convection. These forces compete with gravity and buoyancy to induce droplet bouncing, while the resulting asymmetric flow fields bias neighboring droplets toward the illuminated droplet, leading to clustering. These findings not only expand the library of dynamic droplet behavior but also offer insights into the potential applications of light-driven systems in materials science, soft robotics, and microfluidics.

Marangoni effect↗
DOE OSTI2023

The effect of triangularity on predicted pedestals for the CFETR

In this work, the dominant unstable magnetohydrodynamic mode and its stable region in the pedestal of the China Fusion Engineering Test Reactor are studied by numerical modeling with the peeling-ballooning theory over a wide range of triangularities (δ) and collisionalities (υ*). A new accessible stable region is found at δ<−0.1 for large βN,ped and υ*. This new stable region expands toward lower βN,ped and υ* with decreasing δ and is totally covered by the peeling unstable region with δ=−0.5 because of the increasing trapped particle fraction (ft,eff). The sensitivity of this new stable region to the kinetic ballooning mode constraint and elongation is studied. For negative and low δ<0.1, the boundary of the first stable region is determined from the ballooning mode. For δ>0.1, the peeling mode becomes dominant as the boundary approaches low s with low υ*, while the ballooning mode is still dominant at the boundary with high υ*. When δ increases beyond 0.46, the first stable region is expanded, and access to the second stable region of the ballooning mode opens up. The entire newly connected region of the first and second stable regions keeps expanding with further increases in δ until δ=0.6. Beyond this value, the ballooning mode becomes more unstable with increasing δ, while the peeling mode is approximately unchanged with increasing δ in this range. The change in the dominant mode and the stable region with increasing δ can be explained by the trade-off between the stabilization effect from the deeper poloidal magnetic well and destabilization due to the enlarged drive term.

Physics↗
DOE OSTI2021

Excess-iron driven spin glass phase in Fe 1 + y Te 1 – x Se x

The iron-chalcogenide superconductor FeTe 1– x Se x displays a variety of exotic features distinct from iron pnictides. Although much effort has been devoted to understanding the interplay between magnetism and superconductivity near x = 0.5, the existence of a spin glass phase with short-range magnetic order in the doping range ( x ~ 0.1–0.3) has rarely been studied. Here, we use DC/AC magnetization and (quasi) elastic neutron scattering to confirm the spin-glass nature of the short-range magnetic order in a Fe 1.07 Te 0.8 Se 0.2 sample. The AC-frequency dependent spin-freezing temperature T f generates a frequency sensitivity Δ T f ( ω )/[ T f ( ω )Δlog 10 ω ] ≈ 0.028 and the description of the critical slowing down with τ = τ 0 ( T f / T SG – 1) - z v gives T SG ≈ 22 K and zv ≈ 10, comparable to that of a classical spin-glass system. We have also extended the frequency-dependent T f to the smaller time scale using energy-resolution-dependent neutron diffraction measurements, in which the T N of the short-range magnetic order increases systematically with increasing energy resolution. We find that by removing the excess iron through annealing in oxygen, the spin-freezing behavior disappears, and bulk superconductivity is realized. Thus, the excess Fe is the driving force for the formation of the spin-glass phase detrimental to bulk superconductivity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Implications of parasitic absorption of electron cyclotron waves on ITER operation around half-field

The ITER Research Plan envision operation around half of the nominal magnetic field (i.e. around B = 2.65 T) as a path to baseline operation. This work discusses constraints on the optimal range of magnetic field, which is bounded in the lower limit by the presence of the third-harmonic electron cyclotron resonance at half field, and on the upper limit by the loss of core heating and current drive. Additionally, it will be shown that increasing the magnetic field by only 3%, i.e. to 2.75 T, eliminates the third harmonic parasitic absorption without compromising demonstration of access to H-mode, while operating at a magnetic field of 3.0 T—previously proposed for optimal use of the ion cyclotron system—would impair the use of the electron cyclotron system for core-heating and current drive. Operation at 2.65 T would still be possible if the polarization of the equatorial launcher is changed from X-mode to O-mode in the current flattop phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Resilient U.S. Land Ports of Entry

The continued operation of Land Ports of Entry (LPOE), managed by the Customs and Border Protection (CBP) and General Services Administration% is vital to the U.S. economy and security. Border faculties are included in the Department of Homeland Security (DHS) Government Facilities Sector2, one of the 16 critical infrastructures "whose assets, systems, and networks, whether physical or virtual, are considered so vital to the United States that their incapacitation or destruction would have a debilitating effect on security, national economic security, national public health or safety, or any combination thereof.'" Specifically, disruptions to the flow of border crossing traffic, in the form of closures or increased border crossing wait times, impact the economy and security of all countries involved. This paper describes a process for analyzing and improving the resilience of U.S. Land Ports of Entry. For LPOE, the team believes that energy resilience is the primary objective due to the complete reliance on the e-manifest system and the increasing use of Multi-Energy Portals (MEPs). Emanifests are part of CPB's Automated Commercial Environment (ACE). They document several key pieces of information about cargo vehicles wishing to cross the border into the United States and are submitted before arriving at the port. Vehicles can be flagged for more invasive inspection based on the content of the e-manifest. MEPs are a non-intrusive inspection (NII) technology used to scan the contents of the cargo. Together MEPs and ACE serve an important role in aiding CBP with their mission to protect "the public from dangerous people and materials", and "enabling legitimate trade and travel.'" To analyze resilience of a port, the team would need to understand the port's current energy usage, which systems depend on energy and what backup systems exist, and any emergency operation plans that dictate how systems are operated in the event of a power outage. The team would also need to determine the design basis threats (DBTs) for the LPOE which could include natural disasters, manmade events, and accidents. The magnitudes of the DBTs are calculated and are then translated to expected impacts on the infrastructure and systems at the port. With this information gathered, existing LPOE models developed here at Sandia National Laboratories could be extended to support decisions about resilience. Current models are implemented in FlexSim, a 3rd party discrete event simulator. FlexSim provides 3-D visuals of physical layout that can reveal valuable insights, allows input to be variable (e.g. time it takes to interact with the CBP officer at primary inspection can vary) so that a whole range of possibilities can be captured in the results, and can be used to collect user-defined output metrics. Current LPOE models focus on cargo vehicle traffic, and process changes caused by the installation of new drive-through MEPs. Extending them to address resilience questions would require the addition of key pieces of information learned during the resilience analysis including critical systems, failure rates, and process changes for when failures occur. The primary output metric for current models is border crossing wait time. Additional metrics would also be added to the model to gain a more complete understanding of impacts related to resilience, for example, MEP scan rate. Once complete, the model could be used to analyze the effectiveness of mitigation strategies representing some future state.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗