Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Adsorption Equilibrium and Modeling of Water Vapor on Reduced and Unreduced Silver-Exchanged Mordenite

This work is related to the removal of tritiated water and radioactive iodine from off-gases released during spent nuclear fuel reprocessing. Specifically, it is focused on the adsorption equilibrium of water on reduced silver mordenite (Ag 0 Z), which is the state-of-art solid adsorbent for iodine retention in the off-gas treatment. As the off-gases contain different gas species, including iodine and water, Ag 0 Z would take up iodine and water simultaneously during the adsorption process. Therefore, understanding the adsorption of water on Ag 0 Z is important and necessary for studying the performance of Ag 0 Z in off-gas treatment processes. The isotherms of water (nonradioactive water) on Ag 0 Z were obtained at temperatures of 25, 40, 60, 100, 150, and 200 °C with a continuous-flow adsorption system. The data were analyzed using the Heterogeneous Langmuir and generalized statistical thermodynamic adsorption (GSTA) models, and thermodynamic parameters of the isotherms were obtained from both models. Both models were found capable of describing the isotherms. Isotherms of water on the unreduced silver mordenite (AgZ) were also obtained at 25, 40, and 60 °C and parametrized by the GSTA model. Through the comparison of the isotherms of Ag 0 Z and AgZ, it was found that Ag 0 Z had a higher water adsorption capacity than AgZ. The comparison of their thermodynamic parameters suggested that the interaction of water molecules with the H + in Ag 0 Z was stronger than that with the Ag + in AgZ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermophysical Properties of NaCl–UCl 3 –PuCl 3 Molten Salts: A Combined Computational and Experimental Study

Actinide-bearing molten salts for use as fuels are an essential part of next generation molten salt reactors. Yet, numerous multicomponent salt mixtures are underdeveloped or have not been investigated. Here, this study, based on a combination of experimental and modeling techniques, is dedicated to determining and understanding a variety of properties of the ternary system of NaCl–UCl 3 –PuCl 3 , which represents a scenario for burnup of NaCl–UCl 3 fuel, at two compositions (∼10 and 5 mol % PuCl 3 in eutectic NaCl–UCl 3 pseudobinary) and a range of temperatures. Evaluation of the heat flow and mass loss data showed the 0.61NaCl–0.30UCl 3 –0.09PuCl 3 salt had a melting temperature of 551 ± 5 °C. Two additional thermal effects were observed occurring at approximately 410 and 494 °C. The transition occurring at 410 °C may be due to the presence of oxide in the salt. Extrapolation of thermodynamic data indicates the transition occurring at 494 °C is due to the formation of a liquid phase. Experimental testing determined the density of this system is a linear function of temperature and can be represented by the equation ρ = 4.014–0.0010T(°C), R 2 = 0.992. Additionally, by using atomistic modeling, we found that increasing the PuCl 3 content from 5 to 10 mol % led to the formation of larger Pu 3+ clusters and slower transport of ions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Material Flow Analysis and Life Cycle Assessment of Polyethylene Terephthalate and Polyolefin Plastics Supply Chains in the United States

Plastics are useful and beneficial materials that contribute to an improved quality of life, yet they generate significant solid wastes and emissions and consume significant energy resources. Systems analysis is incomplete on current linear production systems of plastics supply chains and their associated processes. Our study combines material flow and life cycle assessment data sets of polyethylene terephthalate (PET) and the main polyolefin polymers in the United States, comprising over 70% of plastics flows. This study estimates the total greenhouse gas (GHG) emissions and energy consumption of these supply chains, including transportation and end-of-life processes, lacking in prior studies. Here we calculate annual GHG emissions and energy consumption of these plastic supply chains to be 101 MMT CO 2 -eq and 3248 PJ in 2019, respectively. The GHG emissions of these supply chains represented 1.5% of the total U.S. emissions and 5% of the total U.S. industry-related GHG emissions. The total energy consumption of these supply chains represented 3.1% of the total U.S. energy consumption in 2019. Transportation of PET and polyolefin plastic materials contributes 5% and 2% to the total supply chain GHG emissions and energy consumption, respectively. This baseline study provides a benchmark and enables a comparison to future circular production systems for plastics in the United States.

09 BIOMASS FUELS↗

Dissociation and excitation coefficients of nitrogen molecules and nitrogen monoxide generation

The excitation coefficient α{sub N2} is calculated for the excited metastable level of N{sub 2}(A{sub 3}Σ{sub u}{sup +}) in nitrogen molecules. In addition, the dissociation coefficient of nitrogen molecules is investigated by making use of the Boltzmann distribution of the electrons in atmospheric plasmas. The excitation and electron-impact dissociation coefficients of nitrogen molecules are analytically expressed in terms of the electron temperature T{sub e} for evaluations of the reactive oxygen and nitrogen species in atmospheric plasmas. As an application example of these coefficients, the nitrogen monoxide generation through a microwave torch is carried out for a development of medical tool. The nitrogen monoxide concentration from a microwave plasma-torch can be easily controlled by the nitrogen flow rate, mole fraction of the oxygen gas, and the microwave power. A simple analytic expression of the nitrogen monoxide concentration is obtained in terms of the oxygen molecular density and gas flow rate. The experimental data agree remarkably well with the theoretical results from the analytical expression. A microwave nitrogen-torch can easily provide an appropriate nitrogen monoxide concentration for the wound healings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of substrate aspect ratio on the robustness of capillary alignment

Capillary forces associated with liquid bridges formed across solid substrates are routinely exploited to align and assemble micro- and nanoscale devices. The magnitude of these forces plays a critical role in minimizing substrate misalignment and therefore should be controlled for robust and reliable fabrication process. We explore through simulations and experiments the role of the substrate aspect ratio (L/W) on capillary restoring forces and torques. Simulations show that increasing the aspect ratio of the substrates increases the capillary torques and forces when the substrates are misaligned through either lateral or rotational perturbations. The effect of substrate area, perimeter, and liquid volume are also systematically explored to show that the increase in restoring torque is caused by an increase in aspect ratio. A simple theoretical model based on the geometry of the system shows excellent agreement with Surface Evolver simulations. Finally, parameters from experimental flip-chip devices [Josell, D. Wallace, W.E. Warren, J.A. Wheeler, D. Powell, A.C. J. Electron. Packag. 124, 227, (2002)] are used in our simulations to show how current capillary self-alignment schemes could benefit from using rectangular substrate shapes with aspect ratio greater than one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Results from Cu+Au collisions at 200 GeV in PHENIX Experiment

Collisions of asymmetric nuclei (Cu+Au) differ essentially from the case of symmetric nuclei (Cu+Cu, Au+Au) collisions in the geometry of overlap region. This leads to a number of consequences, which provide more absolute and accurate information about fundamental properties of matter under extreme conditions. Nuclear modification factors for π-mesons in Cu+Au interactions at 200 GeV were measured in PHENIX Experiment at RHIC. New experimental data on measurement of flows of different order (v{sub 1}, v{sub 2}) for light hadrons in Cu+Au interactions at 200 GeV will be discussed in this paper.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equation of state calculations for two-dimensional dust coulomb crystal at near zero temperature by molecular dynamics simulations

Dust particles observed in universe as well as in laboratory and technological plasma devices are still under investigation. At low temperature, these particles are strongly negatively charged and are able to form a 2D or 3D coulomb crystal. In this work, our aim was to check the ideal gas law validity for a 2D single-layer dust crystal recently reported in the literature. For this purpose, we have simulated, using the molecular dynamics method, its thermodynamic properties for different values of dust particles number and confinement parameters. The obtained results have allowed us to invalidate the ideal gas behaviour and to propose an effective equation of state which assumes a near zero dust temperature. Furthermore, the value of the calculated sound velocity was found to be in a good agreement with experimental data published elsewhere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SPIDARman: System-Level Physics-Informed Detection of Anomalies in Reactor Collected Data Considering Human Errors

In nuclear power plants (NPPs), anomalies arising from sensors or human errors (HEs) can undermine the performance and reliability of plant operations. Anomaly detection models can be employed to detect sensor errors and HEs. Additionally, physics-informed machine learning models can utilize the known physics of the system, as described by mathematical equations, to ensure that sensor values are consistent with physical laws. Hence, we propose SPIDARman: System-level Physics-Informed Detection of Anomalies in Reactor Collected Data Considering Human Errors, a holistic physics-informed anomaly detection approach based on generative adversarial networks (GANs) to detect anomalies in both automatically collected sensor data and manually collected surveillance data. Here we test our approach on data collected from a flow loop testbed, showcasing its potential to detect anomalies. Results demonstrate that the proposed model performs better than the baseline GAN-based models in detecting sensor and surveillance anomalies, suggesting the potential of physics-informed anomaly detection GAN models in NPPs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Using FUV to IR variability to probe the star–disk connection in the transitional disk of GM Aur

We analyze three epochs of ultraviolet, optical, and near-infrared (NIR) observations of the Taurus transitional disk GM Aur using the Hubble Space Telescope Imaging Spectrograph (STIS) and the Infrared Telescope Facility SpeX spectrograph. Observations were separated by one week and three months in order to study variability over multiple timescales. We calculate accretion rates for each epoch of observations using the STIS spectra and find that those separated by one week had similar accretion rates (∼1×10{sup −8} M{sub ⊙} yr{sup −1}) while the epoch obtained three months later had a substantially lower accretion rate (∼4×10{sup −9} M{sub ⊙} yr{sup −1}). We find that the decline in accretion rate is caused by lower densities of material in the accretion flows, as opposed to a lower surface coverage of the accretion columns. During the low accretion rate epoch, we also observe lower fluxes at both far-ultraviolet (FUV) and IR wavelengths, which trace molecular gas and dust in the disk, respectively. We find that this can be explained by a lower dust and gas mass in the inner disk. We attribute the observed variability to inhomogeneities in the inner disk, near the corotation radius, where gas and dust may co-exist near the footprints of the magnetospheric flows. These FUV–NIR data offer a new perspective on the structure of the inner disk, the stellar magnetosphere, and their interaction.

79 ASTRONOMY AND ASTROPHYSICS↗

Sparse-Sensor Placement for Wind Farm Control

The objective of this paper is to incorporate sparse sensor data to improve flow-field estimates in a wind farm, which can then be used to perform better online wind farm optimization and control. A sparse-sensing algorithm is used to determine the optimal locations of sensors to improve the overall estimation precision of the flow field within the wind farm. This algorithm takes advantage of the dominant atmospheric structures in a wind farm to reconstruct the flow field from point measurements in the field. These measurements, in their optimal locations, have the ability to improve the observability of a wind farm and thus provide faster, more accurate, state estimation.

17 WIND ENERGY↗

Infrasonic directivity of monopole, dipole and bipole ground-surface reflected sources

Infrasound (acoustic waves below 20 Hz) can be used to detect, locate and quantify activity in the atmosphere such as volcanic eruptions and anthropogenic explosions. Attempts to quantify volcanic eruption parameters such as exit velocity, plume height and mass flow rate using infrasound data depend strongly on assumptions of the acoustic source type. Infrasonic sources may produce omnidirectional or directional wavefields, while propagation effects, such as interaction with topography, can induce further wavefield directivity that is measured by field instrumentation. Limited sampling of these wavefields can hinder our ability to infer the underlying source, and thus our understanding of the eruption characteristics. Equivalent sources are often used to represent acoustic source mechanisms and resultant wavefields. In this study, we review equivalent acoustic sources as they pertain to infrasonic scale and wavelengths commonly encountered in very local (⁠<5 km range) geophysical field deployments. We highlight the equivalent infrasonic bipole source that can be induced by ground-reflection of an elevated monopole; we are not aware of any prior infrasound studies that use the bipole source concept. We use analytical and numerical methods to explore source directivity of monopole, dipole and bipole ground-reflected sources at infrasonic frequencies as well as the additional directivity complications introduced by interactions with topography. We illustrate that for typical volcano-infrasound wavelengths, increasing height above the ground as well as increasing source frequency leads to increased wavefield directivity. Numerical modelling using a simple omnidirectional monopole source embedded in topography further illustrates that both horizontal and vertical infrasound directionality can be induced by topography at the distance scales appropriate for local volcano infrasound monitoring. Information summarized in this analytical and numerical exploration of infrasound directivity may be used to help guide future volcano-infrasound field deployments intended to estimate source parameters or quantify wavefield directivity. Analytic solutions for simple whole-space or half-space atmospheres provide useful formulations for planning or initially analysing geophysical field-scale experimental data; however, especially at very local distances from the source (⁠<5 km), 3-D simulations are necessary to account for complex topography commonly encountered in volcano-infrasound applications.

Infrasound↗

Effect of centrality bin width corrections on two-particle number and transverse momentum differential correlation functions

Two-particle number and transverse momentum differential correlation functions are powerful tools for unveiling the detailed dynamics and particle production mechanisms involved in relativistic heavy-ion collisions. Measurements of transverse momentum correlators P 2 and G 2 , in particular, provide added information not readily accessible with better known number correlation functions R 2 . However, it is found that the R 2 and G 2 correlators are somewhat sensitive to the details of the experimental procedure used to measure them. They exhibit, in particular, a dependence on the collision centrality bin width, which may have a rather detrimental impact on their physical interpretation. A technique to correct these correlators for collision centrality bin-width averaging is presented. The technique is based on the hypothesis that the shape of single- and pair-probability densities vary slower with collision centrality than the corresponding integrated yields. In conclusion, the technique is tested with Pb-Pb simulations based on the HIJING and ultrarelativistic quantum molecular dynamics models and shown to enable a precision better than 1% for particles in the kinematic range 0.2 ≤ p T ≤ 2.0 GeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Heat-release equation of state and thermal conductivity of warm dense carbon by proton differential heating

Warm dense carbon is generated at 0.3–2.0 g/cc and 1–7 eV by proton heating. The release equation of state (EOS) after heating and thermal conductivity of warm dense carbon are studied experimentally in this regime using a Au/C dual-layer target to initiate a temperature gradient and two picosecond time-resolved diagnostics to probe the surface expansion and heat flow. Comparison between the data and simulations using various EOSs and thermal conductivity models is quantified with a statistical χ2 analysis. In conclusion, out of seven EOS tables and five thermal conductivity models, only L9061 with the Lee-More model provides a probability above 50% to match all data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Motorette Thermal Performance Testing and Modeling for an Electric Motor with Additively Manufactured Hollow Conductors with Integrated Heat Pipes

This paper discusses the design, build and test of a motorette to characterize the thermal performance of an additively manufactured coil integrated with heat pipes. The motorette is powered using a variable frequency AC power supply and cooled through two independent cooling systems. The first cooling system cools the stator core using forced convection of air flowing over a finned heat sink mounted on the stator outer diameter. The second cooling system cools the heat pipes using forced convection of 50-50 water ethylene glycol (WEG) mixture flowing through condenser chambers. A 3D thermal FEA model of the setup is built and heat transfer coefficients (HTC) of convective boundaries are computed using coolant flow rates from test data and empirical equations. Temperature at locations on the coil and heat sink are recorded and compared to thermal model predicted values. A maximum temperature error of 22.7% occurs at 180ARMS and 800 Hz operating point for the AM dual coil. The thermal model provides higher temperatures compared to test results and hence it is on the conservative side but in general, there is good correlation between test and model results. Lastly, opportunities for improvement to both test data measurement and 3D thermal FEA modeling are discussed.

additive manufacturing↗

Communication Network Layer State Estimation Measurement Model for a Cyber-Secure Smart Grid

Network communication has been proven to be a very important tool and a key factor in the recent development and progress of the power grid operation. It is also considered as the foundation for the smart grid because information and communication are integrated into electricity distribution to achieve reliable and accurate knowledge of the power grid. In previous years, absorbing energy from substations and delivering it to customers was the only type of interaction we knew between utility companies and customers. Presently, the growing connections of small distributed generation units caused by the cost reduction of most of the technologies used in generation and storage of electrical energy, along with the potential benefits of renewable energy have pushed many researchers to look into the improvement of information and communication technologies (ICT) in order to ensure a bidirectional flow of power and data. Moreover, the evolution of information and communication technologies and its applications to smart grid have converted the smart grid into a cyber-physical system where vulnerabilities and additional security challenges such as cyber-threats and cyber-attacks have emerged. Previously, we have demonstrated that using machine learning-based processing on data gathered from communication networks and the power grid was a promising solution for detecting cyber threats by implementing a co-simulation of cyber-security for cross-layer strategy. Since the majority of the challenges observed can only be solved in the network communication layer, we present in this work a physics-based state estimation model of the communication network system towards enhanced cyber-physical security of the smart grid. Information integration with the previously developed machine learning model is developed, providing a enhanced cyber-physical security application for the smart grid. Easy-to-implement model, without hard-to-derive parameters, highlight potential aspects of the model for real-life applications.

Mathieu, Reynold↗

Branching structure and strain hardening of branched metallocene polyethylenes

There have been a number of studies of a series of branched metallocene polyethylenes (BMPs) made in a solution, continuous stirred tank reactor (CSTR) polymerization. The materials studied vary in branching level in a systematic way, and the most highly branched members of the series exhibit mild strain hardening. An outstanding question is which types of branched molecules are responsible for strain hardening in extension. This question is explored here by use of polymerization and rheological models along with new data on the extensional flow behavior of the most highly branched members of the set. After reviewing all that is known about the effects of various branching structures in homogeneous polymers and comparing this with the structures predicted to be present in BMPs, it is concluded that in spite of their very low concentration, treelike molecules with branch-on-branch structure provide a large number of deeply buried inner segments that are essential for strain hardening in these polymers.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗