Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Unusual Coexistence of Nickel(II) and Nickel(IV) in the Quadruple Perovskite Ba 4 Ni 2 Ir 2 O 12 Containing Ir 2 NiO 12 Mixed-Metal-Cation Trimers

In this paper, the crystal chemistry and magnetic properties of two hexagonal nickel(IV)-containing perovskites, Ba 4 Ni 1.94 Ir 2.06 O 12 and BaNiO 3 , are reported. The 12R perovskite, Ba 4 Ni 1.94 Ir 2.06 O 12 , possesses an unexpected coexistence of nickel(II) and nickel(IV). This quadruple perovskite structure contains Ir 2 NiO 12 mixed-metal-cation units in which direct metal–metal bonding between nickel(IV) and iridium(V) is inferred. Finally, X-ray absorption near-edge spectroscopy and X-ray photoelectron spectroscopy measurements were conducted to confirm the simultaneous presence of nickel(II) and nickel(IV).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Redox-Active vs Redox-Innocent: A Comparison of Uranium Complexes Containing Diamine Ligands

Here uranium complexes ( Mes DAE) 2 U(THF) ( 1-DAE ) and Cp 2 U( Mes DAE) ( 2-DAE ) ( Mes DAE = [ArN-CH 2 CH 2 -NAr]; Ar = 2,4,6-trimethylphenyl (Mes)), bearing redox-innocent diamide ligands, have been synthesized and characterized for a full comparison with previously published, redox-active diimine complexes, ( Mes DAB Me ) 2 U(THF) ( 1-DAB ) and Cp 2 U( Mes DAB Me ) ( 2-DAB ) ( Mes DAB Me = [ArN=C(Me)C(Me)=NAr]; Ar = Mes). These redox-innocent analogues maintain an analogous steric environment to their redox-active ligand counterparts to facilitate a study aimed at determining the differing electronic behavior around the uranium center. Structural analysis by X-ray crystallography showed 1-DAE and 2-DAE have a structural environment very similar to 1-DAB and 2-DAB , respectively. The main difference occurs with coordination of the ene-backbone to the uranium center in the latter species. Electronic absorption spectroscopy reveals these new DAE complexes are nearly identical to each other. X-ray absorption spectroscopy suggests all four species contain +4 uranium ions. The data also indicates that there is an electronic difference between the bis(diamide)-THF uranium complexes as opposed to those that only contain one diamide and two cyclopentadienyl rings. Finally, magnetic measurements reveal that all complexes display temperature-dependent behavior consistent with uranium(IV) ions that do not include ligand radicals. Overall, this study determines that there is no significant bonding difference between the redox-innocent and redox-active ligand frameworks on uranium. Furthermore, there are no data to suggest covalent bonding character using the latter ligand framework on uranium, despite what is known for transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and Synthesis of Highly Potent HIV-1 Protease Inhibitors Containing Tricyclic Fused Ring Systems as Novel P2 Ligands: Structure–Activity Studies, Biological and X-ray Structural Analysis

The design, synthesis, and biological evaluation of a new class of HIV-1 protease inhibitors containing stereochemically defined fused tricyclic polyethers as the P2 ligands and a variety of sulfonamide derivatives as the P2' ligands are described. A number of ring sizes and various substituent effects were investigated to enhance the ligand–backbone interactions in the protease active site. Inhibitors 5c and 5d containing this unprecedented fused 6–5–5 ring system as the P2 ligand, an aminobenzothiazole as the P2' ligand, and a difluorophenylmethyl as the P1 ligand exhibited exceptional enzyme inhibitory potency and maintained excellent antiviral activity against a panel of highly multidrug-resistant HIV-1 variants. The umbrella-like P2 ligand for these inhibitors has been synthesized efficiently in an optically active form using a Pauson–Khand cyclization reaction as the key step. The racemic alcohols were resolved efficiently using a lipase catalyzed enzymatic resolution. As a result, two high resolution X-ray structures of inhibitor-bound HIV-1 protease revealed extensive interactions with the backbone atoms of HIV-1 protease and provided molecular insight into the binding properties of these new inhibitors.

59 BASIC BIOLOGICAL SCIENCES↗

Carotenoid-to-Bacteriochlorophyll Energy Transfer in the LH1–RC Core Complex of a Bacteriochlorophyll b Containing Purple Photosynthetic Bacterium Blastochloris viridis

Carotenoid-to-bacteriochlorophyll energy transfer has been widely investigated in bacteriochlorophyll (BChl) $a$-containing light harvesting complexes. Blastochloris viridis utilizes BChl b , whose absorption spectrum is more red-shifted than that of BChl α. This has implications on the efficiency and pathways of carotenoid-to-BChl energy transfer in this organism. The carotenoids that comprise the light-harvesting reaction center core complex (LH1–RC) of B. viridis are 1,2-dihydroneurosporene and 1,2-dihydrolycopene, which are derivatives of carotenoids found in the light harvesting complexes of several BChl α-containing purple photosynthetic bacteria. Steady-state and ultrafast time-resolved optical spectroscopic measurements were performed on the LH1–RC complex of B. at room and cryogenic temperatures. The overall efficiency of carotenoid-to-bacteriochlorophyll energy transfer obtained from steady-state absorption and fluorescence measurements were determined to be ~27% and ~36% for 1,2-dihydroneurosporene and 1,2-dihydrolycopene, respectively. These results were combined with global fitting and target analyses of the transient absorption data to elucidate the energetic pathways by which the carotenoids decay and transfer excitation energy to BChl b. 1,2-Dihydrolycopene transfers energy to BChl b via the S 2 → Q x channel with $k$ ET2 = (500 fs) -1 while 1,2-dihydroneurosporene transfers energy via S 1 → Q y ($k$ ET1 = (84 ps) -1 ) and S 2 → Q x ($k$ ET2 = (2.2 ps) -1 ) channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core-Level Spectroscopy with Hard and Soft X-rays on Phosphorus-Containing Compounds for Energy Conversion and Storage

The electronic properties of nine solid phosphorus (P)-containing compounds with varying oxidation states and chemical environments, including GaP (–III) , InP (–III) , red-P (0) , H 3 P (III) O 3 , Na 2 H 2 P 2 (IV) O 6 , H 3 P (V) O 4 , KH 2 P (V) O 4 , Na 2 HP (V) O 4 , and InP (V) O 4 , are investigated using X-ray absorption near-edge structure (XANES) spectroscopy in the hard (P K-edge) and soft X-ray regime (P L 2,3 - edge). We find shifts in the absorption-edge positions and correlate them with the ligands surrounding the P atom, likely causing a different core–hole interaction screening for different compounds. Complementing the experimental analysis, ab initio many-body calculations of XANES spectra provide insights into the excitonic nature of the observed spectral features and their impact on the electronic structure of the materials. Furthermore, we report on P K-edge XANES measurements on aqueous phosphorus-containing acids, including H 3 PO 3 , H 3 PO 4 , and their mixtures. At first sight, the spectra of the aqueous acids are similar to those of their solid counterparts. However, close inspection reveals a slight red shift of the absorption edge and the presence of fewer spectral features compared with spectra of the respective solids. Mixtures of aqueous acids display spectral features corresponding to the individual components, indicating the potential for speciation and quantification through fingerprinting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Adsorption of Thiol-Containing Molecules on Copper Sulfide Surfaces via Molecule–Surface Disulfide Bridges

Recent results in the fields of nanoenhanced agriculture and expanding interest in prebiotic chemistry have placed increased emphasis on understanding the chemically selective interaction of small molecules with the surfaces of metal sulfides. Here, we present an integrated experimental and computational study of the interaction of thiol-containing molecules with copper sulfide (covellite) surfaces in aqueous media. In situ Fourier-transform infrared (FTIR) measurements and ex situ X-ray photoelectron spectroscopy (XPS) measurements show that molecules bearing free thiol groups, including glutathione and cysteine, bind strongly to CuS (covellite) nanoparticles and to CuS (001) single crystals, while control studies show that similar molecules lacking the free thiol group exhibit much less binding. Additional experiments show that these thiol-containing molecules interact transiently with CuO nanoparticle surfaces but are readily removed by rinsing. The FTIR and XPS experiments demonstrate that adsorption of molecular thiols to CuS surfaces occurs in a chemically selective manner. Further experimental studies and density functional calculations show that the preferred mode of binding is through the surface S atoms, forming a Solid–S–S–Molecule disulfide linkage. While the role of disulfide linkages in controlling structure and function of proteins and other biomolecules is widely known, the formation of surface disulfide linkages as a motif for covalent molecular binding at surfaces has not been established previously.

36 MATERIALS SCIENCE↗

Low-Temperature Solution-Phase Growth of Silicon and Silicon-Containing Alloy Nanowires

Low-temperature synthesis of crystalline silicon and silicon-containing nanowires remains a challenge in synthetic chemistry due to the lack of sufficiently reactive Si precursors. We report that colloidal Si nanowires can be grown using tris(trimethylsilyl)silane or trisilane as the Si precursor by a Ga-mediated solution-liquid-solid (SLS) approach at temperatures of about 200 °C, which is more than 200 °C lower than that reported in the previous literature. We further demonstrate that the new Si chemistry can be adopted to incorporate Si atoms into III-V semiconductor lattices, which holds promise to produce a new Si-containing alloy semiconductor nanowire. This development represents an important step toward low-temperature fabrication of Si nanowire-based devices for broad applications.

36 MATERIALS SCIENCE↗

Ion Mobility Spectrometry Characterization of the Intermediate Hydrogen-Containing Gold Cluster Au7(PPh3)7H52+

We employ ion mobility spectrometry and density functional theory to determine the structure of Au7(PPh3)7H52+ (PPh3 = triphenylphosphine) which was recently identified by high mass resolution mass spectrometry. Experimental ion-neutral collision cross sections represent the momentum transfer between the ionic clusters and gas molecules averaged over the relative thermal velocities of the colliding pair, thereby providing structural insights. Theoretical calculations indicate the geometry of Au7(PPh3)7H52+ is similar to Au7(PPh3)7+, with three hydrogen atoms bridging two gold atoms and two hydrogen atoms forming single Au–H bonds. Collision induced dissociation products observed during IMS experiments reveal that smaller hydrogen containing clusters may be produced through fragmentation of Au7(PPh3)7H52+. Our findings indicate that hydrogen containing species like Au7(PPh3)7H52+ act as intermediates in the formation of larger phosphine ligated gold clusters. These results advance the understanding and ability to control the mechanisms of size selective cluster formation which is necessary for scalable synthesis of clusters with tailored properties. This work was supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. M.A.H. acknowledges support from the DOE Science Undergraduate Laboratory Internship (SULI) program. H.H. acknowledges support from the DOE Office of Workforce Development for Teachers and Scientist (WDTS) under the Visiting Faculty Program (VFP). The efforts of K.A.M. and B.H.C. were supported by the Defense Threat Reduction Agency (Grant No. HDTRA1-14-1-0023). The research was performed using EMSL, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for DOE under Contract DE-AC05-76RL01830.

Ligare, Marshall R.↗

Physical and Chemical Responses of Amidine-Containing Polymers in the Capture and Release of CO 2

Polymeric materials containing amidine motifs are of high interest due to their ability to reversibly capture and release CO 2 at ambient temperature. Here, in this study, we probe physical and chemical responses of styrene-based copolymers containing linear amidine motifs as functions of CO 2 and inert gas exposures and temperature. A copper-catalyzed azide–alkyne cycloaddition “click” reaction involving N′-propargyl-N,N-dimethylacetamidine is used to modify random copolymers, resulting in an array of linear amidine motifs along the chain backbone with the amount of CO 2 -active amidine controlled by the copolymer composition. Through thermogravimetric measurements, we demonstrate that the amidine-functionalized copolymers efficiently capture CO 2 upon exposure to a stream of CO 2 (at 27 °C) and release it at a slightly elevated temperature (50 °C) when exposed to an inert gas stream (N 2 ). In addition to displaying a maximum adsorption capacity of 22 wt % in the presence of pure CO 2 , the copolymers show composition-dependent direct air capture (DAC) behaviors. Small molecule analogs are used to definitively understand degradation via chemical hydrolysis of the amidine moiety, which leads to insolubility and a large reduction in CO 2 adsorption capacity (1.7 wt %). Neutron vibrational spectroscopy and DFT calculations confirm that CO 2 binds strongly to the amidine motif, inducing a strong bending of the CO 2 molecule from its linear geometry. The coupled insights into mechanisms and behaviors of CO 2 adsorption in amidine-functionalized polymers provides a foundation for future investigations of CO 2 -responsive polymers and soft materials to improve carbon capture and sequestration technologies.

Chun, Danielle J.↗

Anionic polymerization of oxadiazole-containing 2-vinylpyridine by precisely tuning nucleophilicity and the polyelectrolyte characteristics of the resulting polymers

Anionic polymerization is one of the most powerful techniques for preparation of well-defined polymers. However, this well-known and widely employed polymerization technique encounters major limitations for the polymerization of functional monomers containing heteroatoms. This work presents the anionic polymerization of 2-phenyl-5-(6-vinylpyridin-3-yl)-1,3,4-oxadiazole (VPyOzP), a heteroatom monomer that contains both oxadiazole and pyridine substituents within the same pendant group, using various initiating systems based on diphenylmethyl potassium (DPM-K) and triphenylmethyl potassium (TPM-K). Remarkably, well-defined poly(2-phenyl-5-(6-vinylpyridin-3-yl)-1,3,4-oxadiazole) (PVPyOzP) polymers having predicted molecular weights (MW) ranging from 2200 to 21 100 g/mol and polydispersity indices (PDI) ranging from 1.11 to 1.15 were prepared with TPM-K, without any additional additives, at –78 °C. The effect of temperature on the polymerization of PVPyOzP was also studied at –78, –45, 0, and 25 °C, and it was observed that increasing the polymerization temperature produced materials with unpredictable MW’s and broader molecular weight distributions. Furthermore, the nucleophilicity of PVPyOzP was investigated through copolymerization with methyl methacrylate and acrylonitrile, where only living poly(methyl methacrylate) (PMMA) prepared by DPM-K/VPPy and in the absence of additives such as lithium chloride (LiCl) and diethyl zinc (ZnEt 2 ) could be used to produce the well-defined block copolymer of PMMA-b-PVPyOzP. It was also demonstrated by sequential monomer addition that the nucleophilicity of living PVPyOzP is located between that of living PMMA and polyacrylonitrile (PAN). Here, the pyridine moiety of the pendant group also allowed for quaternization and produced PQVPyOzP homopolymer using methyl iodide (CH 3 I) and bis(trifluoromethylsulfonyl)amide [Tf 2 N – ]. The resulting charged polymer and counterion complexes were manipulated and investigated for potential use as membranes for carbon dioxide (CO 2 ) capture.

36 MATERIALS SCIENCE↗

Versatile Synthesis of Amine-Reactive Microgels by Self-Assembly of Azlactone-Containing Block Copolymers

Relations between molecular design, chemical functionality, and stimulus-triggered response are important for a variety of applications of polymeric systems. In this paper, reactive amphiphilic block copolymers (BCPs) of poly(2-vinylpyridine)-block-poly(2-vinyl-4,4-dimethylazlactone) (PVP-b-PVDMA) were synthesized and assembled into microgels capable of incorporating functional amines. The composition of the PVP-b-PVDMA BCPs was varied to control the number of reactive sites in the spherical aggregates created by self-assembly of PVP-b-PVDMA BCPs in a 2-propanol/THF (v:v = 19:1) solvent mixture, which is selective for PVP. PVDMA and PVP segments were selectively cross-linked by 1,4-diaminobutane (DAB) or 1,4-diiodobutane (DIB) to fabricate core- and corona-cross-linked azlactone-containing microgels, respectively. Non-cross-linked aggregates of PVP-b-PVDMA and DIB-cross-linked microgels dissociate when exposed to THF, which is a good solvent for both blocks. However, the DAB-cross-linked BCP microgels swell in THF, suggesting the formation of a stable, three-dimensional network structure. Finally, because of their ability to be reactively modified in ways that allows their stability or disassembly characteristics to be tailored, these azlactone-containing BCP microgels provide an attractive platform for applications in a wide range of fields, including catalysis, imaging, molecule separation, and guest loading for targeted delivery.

36 MATERIALS SCIENCE↗

Supramolecular Nanosheets Assembled from Poly(ethylene glycol)- b -poly( N -(2-phenylethyl)glycine) Diblock Copolymer Containing Crystallizable Hydrophobic Polypeptoid: Crystallization Driven Assembly Transition from Filaments to Nanosheets

Supramolecular two-dimensional (2D) nanomaterials from block copolymers have received great interest for their unique structure and properties. In this work, we report the formation of ultrathin nanosheets from self-assembly of amphiphilic poly(ethylene glycol)- b -poly( N -(2-phenylethyl)glycine) (PEG- b -PNPE) diblock copolymers, which contain rigid crystallizable polypeptoid segment. The PEG- b -PNPE copolymers were synthesized via ring opening polymerization (ROP). The obtained PEG- b -PNPE diblock copolymers can spontaneously form highly ordered structures in PEG selective solvents such as water and methanol. The copolymers with short PNPE segment can directly form nanosheets in water, and the obtained 2D nanosheets have a uniform thickness of 4-5 nm. In contrast, the copolymers with relatively long PNPE segment can only assemble into nanosheets with the assistance of methanol. It is anticpated that the crystallization and π-π stacking of PNPE blocks play critical roles in the formation of the nanosheet as suggested by grazing incidence wide-angle X-ray scattering (GIWAXS). During the process of adding water into copolymer methanol solution, the nanosheets were observed to evolve from individual nanofibers, to parallel aligning nanofibers, and eventually to the nanosheet structures verified by transmission electron microscopy (TEM) and cryo-TEM characterizations. We demonstrated that the preassembled filament behave as a fundamental packing motif to align laterally and further fuse into platelet-like structures. The assembly structure evolution process was tracked by TEM, atomic force microscopy, and cryo-TEM techniques. The understandings of supramolecular 2D nanosheet formation offer a new opportunity to make hierarchical nanostructures from polypeptoids containing copolymers.

36 MATERIALS SCIENCE↗

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH 3 NH 3 PbI 3-x Br x perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ E g ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells. (Figure Presented).

36 MATERIALS SCIENCE↗

Protein-Containing Lipid Bilayers Intercalated with Size-Matched Mesoporous Silica Thin Films

Here, proteins are key components in a multitude of biological processes, of which the functions carried out by transmembrane (membrane-spanning) proteins are especially demanding for investigations. This is because this class of protein needs to be incorporated into a lipid bilayer representing its native environment, and in addition, many experimental conditions also require a solid support for stabilization and analytical purposes. The solid support substrate may, however, limit the protein functionality due to protein–material interactions and a lack of physical space. We have in this work tailored the pore size and pore ordering of a mesoporous silica thin film to match the native cell-membrane arrangement of the transmembrane protein human aquaporin 4 (hAQP4). Using neutron reflectivity (NR), we provide evidence of how substrate pores host the bulky water-soluble domain of hAQP4, which is shown to extend 7.2 nm into the pores of the substrate. Complementary surface analytical tools, including quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescence microscopy, revealed successful protein-containing supported lipid bilayer (pSLB) formation on mesoporous silica substrates, whereas pSLB formation was hampered on nonporous silica. Additionally, electron microscopy (TEM and SEM), light scattering (DLS and stopped-flow), and small-angle X-ray scattering (SAXS) were employed to provide a comprehensive characterization of this novel hybrid organic–inorganic interface, the tailoring of which is likely to be generally applicable to improve the function and stability of a broad range of membrane proteins containing water-soluble domains.

59 BASIC BIOLOGICAL SCIENCES↗

Synthesis and Reactivity of Palladium(II) Alkyl Complexes that Contain Phosphine-cyclopentanesulfonate Ligands

The synthesis of the phosphine-cyclopentanesulfonate pro-ligands Li/K[2-PPh 2 -cyclopentanesulfonate] (Li/K[2a]), Li/K[2-P(2-OMe-Ph) 2 -cyclopentanesulfonate] (Li/K[2b]), and H[2b], and the corresponding Pd(II) alkyl complexes (κ 2 - P , O -2a)PdMe(pyridine) (3a) and (κ 2 - P , O -2b)PdMe(pyridine) (3b) is described herein. The sulfonate-bridged base-free dimer {(2b)PdMe} 2 (4b) was synthesized by abstraction of pyridine from 3b using B(C 6 F 5 ) 3 . The borane-coordinated base-free dimer [{2b·B(C 6 F 5 ) 3 }PdMe] 2 (5b), in which B(C 6 F 5 ) 3 binds to a sulfonate oxygen, was prepared by addition of 1 equiv of B(C 6 F 5 ) 3 per Pd to 4b or addition of 2 equiv of B(C 6 F 5 ) 3 to 3b. Compounds 3b, 4b, and 5b polymerize ethylene with low activity (up to 210 kg mol –1 h –1 at 250 psi and 80 °C) to linear polyethylene ( M n = 1950–5250 Da) with predominantly internal olefin placements. 3b and 4b copolymerize ethylene with methyl acrylate to linear copolymers that contain up to 11.7 mol % methyl acrylate, which is incorporated as –CH 2 CH(CO 2 Me)CH 2 – (80%) in-chain units and –CH 2 CH(CO 2 Me)Me (8%) and –CH 2 CH=CH(CO 2 Me) (12%) chain-end units. 3b and 4b also copolymerize ethylene with vinyl fluoride to linear copolymers that contain up to 0.41 mol % vinyl fluoride, which is incorporated as –CH 2 CHFCH 2 – (~80%) in-chain units and –CH 2 CF 2 H (7%), –CH 2 CHFCH 3 (5%), and –CH 2 CH 2 F (8%) chain-end units. Complexes 3b and 4b are more stable and active in ethylene polymerization than analogous (PAr 2 - CH 2 CH 2 SO 3 )PdR catalysts, but are less active than analogous (PAr 2 - arene sulfonate)PdR catalysts. Low-temperature NMR studies show that 4b reacts with ethylene below -10 °C to form the ethylene adduct cis - P , R -(2b)PdMe(ethylene) (7b), which undergoes ethylene insertion at 5 °C. DFT calculations for a model (PMe 2 -cyclopentanesulfonate)Pd(Pr)(ethylene) species show that ethylene insertion proceeds by cis - P , R / trans - P , R isomerization followed by migratory insertion, and that the lower activity of 3b and 4b vis-à-vis analogous (PAr 2 -arenesulfonate)PdR catalysts results from a higher barrier for migratory insertion of the trans - P , R isomer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molybdenum and Tungsten Alkylidyne Complexes Containing Mono-, Bi-, and Tridentate N -Heterocyclic Carbenes

In this work, new tungsten and molybdenum alkylidyne complexes bearing mono-, bi-, and tridentate N-heterocyclic carbenes (NHCs) have been synthesized. Formation of unprecedented structures in complexes bearing N-tert-butyl substituents on the imidazol(in)-2-ylidene was observed, leading to molybdenum complexes containing an abnormal carbene (Mo-4) and a bridging O,C,C-pincer ligand (Mo-10) and to a tungsten complex containing a cationic imidazolinium-tagged alkoxide forming an inner salt with an anionic tungsten center (W-5). Both the abnormal carbene binding in Mo-4 and the O,C,C-pincer-type structure of Mo-10 were confirmed by single-crystal X-ray analysis, and the proposed structure of W-5 is supported by the single-crystal X-ray structure of a minor byproduct (W-8) formed during the synthesis of W-4, displaying the aforementioned inner-salt-like structure. The novel alkylidyne complexes were also investigated for their capability to form a previously postulated quasi-cationic species with a weakly coordinating anion (WCA) during the alkyne homometathesis of 1-phenyl-1-propyne. Overall, incorporation of bidentate and strongly $σ$ donating NHCs as well as introduction of better leaving groups did not lead to the expected increase in catalytic activity. Despite identical ligand spheres, changing from molybdenum to tungsten led to complete loss of activity in the bidentate systems.

36 MATERIALS SCIENCE↗

Luminescent Properties of DOBDC Containing MOFs: The Role of Free Hydroxyls

A novel metal–organic framework (MOF), Mn-DOBDC, has been synthesized in an effort to investigate the role of both the metal center and presence of free linker hydroxyls on the luminescent properties of DOBDC (2,5-dihydroxyterephthalic acid) containing MOFs. Co-MOF-74, RE-DOBDC (RE–Eu and Tb), and Mn-DOBDC have been synthesized and analyzed by powder X-ray diffraction (PXRD) and the fluorescent properties probed by UV–Vis spectroscopy and density functional theory (DFT). Mn-DOBDC has been synthesized by a new method involving a concurrent facile reflux synthesis and slow crystallization, resulting in yellow single crystals in monoclinic space group C2/c. Mn-DOBDC was further analyzed by single-crystal X-ray diffraction (SCXRD), scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS), and photoluminescent emission. Results indicate that the luminescent properties of the DOBDC linker are transferred to the three-dimensional structures of both the RE-DOBDC and Mn-DOBDC, which contain free hydroxyls on the linker. In Co-MOF-74 however, luminescence is quenched in the solid state due to binding of the phenolic hydroxyls within the MOF structure. Finally, Mn-DOBDC exhibits a ligand-based tunable emission that can be controlled in solution by the use of different solvents.

36 MATERIALS SCIENCE↗

One-Step Synthesis of Zeolite Membranes Containing Catalytic Metal Nanoclusters

Metal-loaded zeolitic membranes are promising candidates as catalytic membrane reactors. We report a one-step synthesis method to synthesize zeolite membranes containing metal nanoclusters, that has advantages in comparison to multistep methods such as impregnation and ion exchange. Pure-silica MFI zeolite-Pt hybrid membranes were prepared by hydrothermal synthesis with addition of 3-mercaptopropyl-trimethoxysilane (MPS) and a platinum precursor. Composition analysis and mapping by energy-dispersive X-ray spectroscopy (EDX) reveal that Pt ions/clusters are uniformly distributed along the membrane cross-section. High-magnification scanning transmission electron microscopy (STEM) analysis shows that Pt metal clusters in the hybrid zeolite membrane have a diameter distribution in the range of 0.5–2.0 nm. In contrast, a pure-silica MFI membrane synthesized from an MPS-free solution shows negligible incorporation of Pt metal clusters. To characterize the properties of the hybrid (zeolite/metal) membrane, it was used as a catalytic membrane reactor (CMR) for high-temperature propane dehydrogenation (PDH) at 600 °C and 1 atm. The results indicate that Pt metal clusters formed within the MFI zeolite membrane can serve as effective catalysts for high-temperature PDH reaction along with H 2 removal via membrane permeation, thereby increasing both conversion and selectivity in relation to a conventional membrane reactor containing an equivalent amount of packed Pt catalyst in contact with an MFI membrane. In conclusion, the hybrid zeolite-Pt CMR also showed stable conversion and selectivity upon extended high-temperature operation (12 h), indicating that encapsulation in the zeolite allowed thermal stabilization of the Pt nanoclusters and reduced catalyst deactivation.

36 MATERIALS SCIENCE↗