Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The drift field model applied to the lithium-containing silicon solar cell

The drift field model used by Wolf (1963) to calculate the short-circuit current was extended to permit calculations of the open-circuit voltage and the maximum power under conditions of illumination of either tungsten (2800 C) source or air mass zero sunlight. Voltages were calculated using an expression for the drift field diode saturation current. The model, applied to the oxygen-rich (C-13 group) lithium solar cells, was used to calculate the pre- and post-electron bombardment trends of the open-circuit voltage, maximum power, and short-circuit current for lithium gradients in the range from 10 to the 18th power to 10 to the 19th power Li/cm to the 4th power. Diffusion length degradation and carrier removal effects were sufficient to predict the cell performance up to 3 x 10 to the 14th electrons per sq cm. Beyond this fluence it was necessary to include drift field removal effects.

Godlewski, M. P.↗
NASA NTRS1974

Experimental Investigation of Electron Cloud Containment in a Nonuniform Magnetic Field

Dense clouds of electrons were generated and studied in an axisymmetric, nonuniform magnetic field created by a short solenoid. The operation of the experiment was similar to that of a low-pressure (approximately 0.000001 Torr) magnetron discharge. Discharge current characteristics are presented as a function of pressure, magnetic field strength, voltage, and cathode end-plate location. The rotation of the electron cloud is determined from the frequency of diocotron waves. In the space charge saturated regime of operation, the cloud is found to rotate as a solid body with frequency close to V sub a/phi sub a where V sub a is the anode voltage and phi suba is the total magnetic flux. This result indicates that, in regions where electrons are present, the magnetic field lines are electrostatic equipotentials (E bar, B bar = 0). Equilibrium electron density distributions suggested by this conditions are integrated with respect to total ionizing power and are found consistent with measured discharge currents.

Eninger, J. E.↗
NASA NTRS1974

Fracture of composite plates containing periodic buffer strips

Fracture of a composite plate which consists of perfectly bonded parallel load carrying laminates and buffer strips is considered. Fatigue cracks appear and spread in main laminates or in buffer strips or in both perpendicular to the interfaces. The external load is applied to the plate parallel to the strips and away from the crack region. The problem is solved for fully imbedded cracks and for broken laminates or strips. Corresponding stress intensity factors are calculated.

Erdogan, F.↗
NASA NTRS1974

Ion heating and containment in the NASA Lewis bumpy torus plasma

Experimental observations have been made during steady state operation of a torus experiment at input powers up to 150 kilowatts in deuterium and helium gas. The steady state ion heating method utilizes a modified Penning discharge operated in a bumpy torus confinement geometry. The bumpy torus plasma is acted upon by a combination of strong electric and magnetic fields. In a deuterium plasma, electron temperatures from 14 to 140 electron volts and ion kinetic temperatures from 160 to 1785 electron volts were observed. At least two distinct operating regimes exist, each of which is associated with a characteristic range of background gas pressure and electron temperature. Experimental data show that the average ion residence time in the plasma is virtually independent of magnetic field strength.

Roth, J. R.↗
NASA NTRS1975

Determination of hydroxide and carbonate contents of alkaline electrolytes containing zinc

A method to prevent zinc interference with the titration of OH- and CO3-2 ions in alkaline electrolytes with standard acid is presented. The Ba-EDTA complex was tested and shown to prevent zinc interference with acid-base titrations without introducing other types of interference. Theoretical considerations indicate that this method can be used to prevent interference by other metals.

Otterson, D. A.↗
NASA NTRS1975

Design and fabrication of composite wing panels containing a production splice

Bolted specimens representative of both upper and lower wing surface splices of a transport aircraft were designed and manufactured for static and random load tension and compression fatigue testing including ground-air-ground load reversals. The specimens were fabricated with graphite-epoxy composite material. Multiple tests were conducted at various load levels and the results were used as input to a statistical wearout model. The statically designed specimens performed very well under highly magnified fatigue loadings. Two large panels, one tension and compression, were fabricated for testing by NASA-LRC.

Reed, D. L.↗
NASA NTRS1974

Ion heating and containment in the NASA Lewis Bumpy Torus plasma

Experimental observations have been made during steady-state operation of the NASA Lewis Bumpy Torus experiment at input powers up to 150 kilowatts in deuterium and helium gas. A steady-state ion heating method utilizes a Modified Penning discharge operated in a bumpy torus confinement geometry. The bumpy torus plasma is acted upon by a combination of strong electric and magnetic fields. In a deuterium plasma, electron temperatures from 14 to 140 electron volts and ion kinetic temperatures from 160 to 1785 electron volts were observed. At least two distinct operating regimes exist, each of which is associated with a characteristic range of background gas pressure and electron temperature. Experimental data show that the average ion residence time (ionization time) in the plasma is virtually independent of the magnetic field strength.

Roth, J. R.↗
NASA NTRS1975

Acoustic systems containing curved duct sections

The analysis of waves in bends in acoustical ducting of rectangular cross section was extended to the study of motion near discontinuities. This included determination of the characteristics of the tangential and radial components of the nonpropagating modes. It is established that attenuation of the nonpropagating modes strongly depends on frequency and that, in general, the sharper the bend, the less attenuation may be expected. Evaluation of a bend's impedance and of impedance-generated reflections is also presented in detail.

Rostafinski, W.↗
NASA NTRS1976

Flight 1 technical report for experiment 74-37 contained polycrystalline solidification in low-G

A .005 M solution of fluorescein in cyclohexanol was directionally solidified in a standard 10 x 10 x 45mm UV silica cuvette, using a bottom thermoelectric chilling device. Progress of the experiment was monitored by time lapse photography. During flight (SPAR I) the camera malfunctioned and only one quarter of the expected data were collected. Comparison of flight and ground specimens indicated that: (1) The dark green layer observed ahead of the solid-liquid interface which is most likely the solute-enriched zone, appears to be wider in the flight specimen; (2) Parasitic nucleation ahead of the solid-liquid interface in the flight sample led to an irregularly shaped interface, smaller grain size, equiaxed grain morphology and a larger average macroscopic growth rate; (3) The formation of equiaxed grains ahead of the solid-liquid interface in the flight specimen may be attributed to ordered islands within the liquid, which survived remelting because of the low degree of superheating (approximately equal to 1.5 C), did not settle because of reduced gravity and acted as nuclei during cooling.

Papaziak, J. M.↗
NASA NTRS1976

Diffusivity in turbulent fluid containing two dominant scales, and compressible shear layer according to a kinetic theory

The solution of the two nonequilibrium-degree kinetic equation was first determined for the effective length scale and turbulence energy for a spatially homogeneous turbulence field with two characteristic length scales, where the source for one family of eddies exists. This solution was applied to the evaluation of the eddy diffusivity in the combustion chamber of an internal combustion engine. The result was compared with another existing solution. This was carried out to demonstrate the feasibility of obtaining an effective length-scale equation within the context of the kinetic theory. A formulation and partial solution of the compressible plane shear layer are also presented.

Chung, P. M.↗
NASA NTRS1976

Sustained load crack growth design data for Ti-6Al-4V titanium alloy tanks containing hydrazine

Sustained load crack growth data for Ti-6Al-4V titanium alloy in hydrazine per MIL-P-26536 and refined hydrazine are presented. Fracture mechanics data on crack growth thresholds for heat-treated forgings, aged and unaged welds, and aged and unaged heat-affected zones are reported. Fracture mechanics design curves of crack growth threshold stress intensity versus temperature are generated from 40 to 71 C.

Lewis, J. C.↗
NASA NTRS1975

Fracture mechanics correlation of boron/aluminum coupons containing stress risers

The mechanical behavior of boron/aluminum near stress risers has been studied and reported. This effort was directed toward defining the tensile behavior of both unidirectional and (0/ plus or minus 45) boron/aluminum using linear elastic fracture mechanics (LEFM). The material used was 5.6-mil boron in 6061 aluminum, consolidated using conventional diffusion bonding techniques. Mechanical properties are reported for both unidirectional and (0/ plus or minus 45) boron/aluminum, which serve as control data for the fracture mechanics predictions. Three different flawed specimen types were studied. In each case the series of specimens remained geometrically similar to eliminate variations in finite size correction factors. The fracture data from these tests were reduced using two techniques. They both used conventional LEFM methods, but the existence of a characteristic flaw was assumed in one case and not the other. Both the data and the physical behavior of the specimens support the characteristic flaw hypothesis. Cracks were observed growing slowly in the (0/ plus or minus 45) laminates, until a critical crack length was reached at which time catastrophic failure occurred.

Adsit, N. R.↗