Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computation time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

An implicit multigrid scheme for hypersonic strong-interaction flowfields

An implicit multigrid method for the compressible Navier-Stokes equations is applied to a series of two-dimensional, steady, laminar hypersonic flows over a compression ramp, including both attached and separated flow conditions. The algorithm uses upwind-biased differencing for the convective and pressure terms and central differencing for the shear-stress and heat-transfer terms. An implicit spatially factored scheme is used to advance the solution in terms on a given mesh, and a V-cycle multigrid strategy is used to accelerate convergence. The multigrid algorithm provided an order of magnitude decrease in the computational time required to obtain a converged position of the separation location and enabled a substantially grid-independent result to be obtained for each of the flows considered.

Thomas, James L.↗

An optimal GPS data processing technique

A formula is derived to optimally combine dual-frequency GPS (Global Positioning System) pseudorange and carrier phase data streams into a single equivalent data stream, reducing the data volume and computing time in the filtering process for parameter estimation by a factor of four. The resulting single data stream is that of carrier phase measurements with both data noise and bias uncertainty strictly defined. With this analytical formula the single stream of equivalent GPS measurements can be efficiently formed by simple numerical calculations without any degradation in data strength. The formulation for the optimally combined GPS data and their covariances are given in closed form. Carrier phase ambiguity resolution, when feasible, is improved due to the preservation of the full data strength with the optimal data combining process.

Wu, S. C.↗

Dynamic modeling and simulation of planetary rovers

This paper documents a preliminary study into the dynamic modeling and computer simulation of wheeled surface vehicles. The research centered on the feasibility of using commercially available multibody dynamics codes running on engineering workstations to perform the analysis. The results indicated that physically representative vehicle mechanics can be modeled and simulated in state-of-the-art Computer Aided Engineering environments, but at excessive cost in modeling and computation time. The results lead to the recommendation for the development of an efficient rover mobility-specific software system. This system would be used for vehicle design and simulation in planetary environments; controls prototyping, design, and testing; as well as local navigation simulation and expectation planning.

Lindemann, Randel A.↗

Experimental verification of nanometer level optical pathlength control on a flexible structure

This paper describes an experimental facility being developed for demonstration and validation of control concepts arising out of NASA's Control Structure Interaction program. The facility is meant to be a ground testbed with relevance to a broad class of precision optical space systems. The objective of the experimental program is to investigate a multilayer control approach to the maintenance of nanometer-level optical pathlength stability in the presence of external disturbances and multiple structural resonances. The facility is designed to explore the effect of applying, separately and in combinations, structural vibration suppression, vibration isolation, and active optical articulation. This paper describes the testbed facility, the structure, optics, sensors, actuators, and real-time computer and program development environment. Initial optical articulation experimental results are presented.

O'Neal, Michael↗

Non-LTE radiative transfer with lambda-acceleration - Convergence properties using exact full and diagonal lambda-operators

We investigate the convergence properties of Lambda-acceleration methods for non-LTE radiative transfer problems in planar and spherical geometry. Matrix elements of the 'exact' A-operator are used to accelerate convergence to a solution in which both the radiative transfer and atomic rate equations are simultaneously satisfied. Convergence properties of two-level and multilevel atomic systems are investigated for methods using: (1) the complete Lambda-operator, and (2) the diagonal of the Lambda-operator. We find that the convergence properties for the method utilizing the complete Lambda-operator are significantly better than those of the diagonal Lambda-operator method, often reducing the number of iterations needed for convergence by a factor of between two and seven. However, the overall computational time required for large scale calculations - that is, those with many atomic levels and spatial zones - is typically a factor of a few larger for the complete Lambda-operator method, suggesting that the approach should be best applied to problems in which convergence is especially difficult.

Macfarlane, J. J.↗

Improving the efficiency of aerodynamic shape optimization procedures

The computational efficiency of an aerodynamic shape optimization procedure which is based on discrete sensitivity analysis is increased through the implementation of two improvements. The first improvement involves replacing a grid point-based approach for surface representation with a Bezier-Bernstein polynomial parameterization of the surface. Explicit analytical expressions for the grid sensitivity terms are developed for both approaches. The second improvement proposes the use of Newton's method in lieu of an alternating direction implicit (ADI) methodology to calculate the highly converged flow solutions which are required to compute the sensitivity coefficients. The modified design procedure is demonstrated by optimizing the shape of an internal-external nozzle configuration. A substantial factor of 8 decrease in computational time for the optimization process was achieved by implementing both of the design improvements.

Burgreen, Greg W.↗

Vibration of thermally buckled composite plates with initial deflections using triangular elements

A consistent finite element formulation is presented for the analysis of thermal postbuckling and free vibration of thermally buckled thin, laminated composite plates subjected to large temperature change. The influence of moderately large initial imperfections in deflection on the thermal postbuckling deflection and the vibration characteristics of the buckled plate is also investigated. The finite element equations of motion are derived from the principle of virtual work. These equations can be mathematically separated into two sets and solved in sequence. The first set of equations yields the particular solution of static thermal postbuckling deflection, and the second set of equations gives the homogeneous solution of vibration characteristics on the buckled plate. The first set of static equations is solved by using Newton-Raphson iteration method. The tangent stiffness matrix in the final iteration is equal to the total stiffness matrix of the second set of dynamic equations. This feature saves tremendous computation time in comparing with using the conventional approach. The influence of lamination angle, temperature distribution, plate planform of arbitrary shape, and boundary support conditions on postbuckling and vibration behavior are investigated.

Zhou, R. C.↗

Structural design utilizing updated, approximate sensitivity derivatives

A method to improve the computational efficiency of structural optimization algorithms is investigated. In this method, the calculations of 'exact' sensitivity derivatives of constraint functions are performed only at selected iterations during the optimization process. The sensitivity derivatives utilized within other iterations are approximate derivatives which are calculated using an inexpensive derivative update formula. Optimization results are presented for an analytic optimization problem (i.e., one having simple polynomial expressions for the objective and constraint functions) and for two structural optimization problems. The structural optimization results indicate that up to a factor of three improvement in computation time is possible when using the updated sensitivity derivatives.

Scotti, Stephen J.↗

A numerical treatment of geodynamic viscous flow problems involving the advection of material interfaces

Effective numerical treatment of multicomponent viscous flow problems involving the advection of sharp interfaces between materials of differing physical properties requires correction techniques to prevent spurious diffusion and dispersion. We develop a particular algorithm, based on modern shock-capture techniques, employing a two-step nonlinear method. The first step involves the global application of a high-order upwind scheme to a hyperbolic advection equation used to model the distribution of distinct material components in a flow field. The second step is corrective and involves the application of a global filter designed to remove dispersion errors that result from the advection of discontinuities (e.g., material interfaces) by high-order, minimally dissipative schemes. The filter introduces no additional diffusion error. Nonuniform viscosity across a material interface is allowed for by the implementation of a compositionally weighted-inverse interface viscosity scheme. The combined method approaches the optimal accuracy of modern shock-capture techniques with a minimal increase in computational time and memory. A key advantage of this method is its simplicity to incorporate into preexisting codes be they finite difference, element, or volume of two or three dimensions.

Lenardic, A.↗

An optimal GPS data processing technique for precise positioning

A mathematical formula to optimally combine dual-frequency GPS pseudorange and carrier phase (integrated Doppler) data streams into a single data stream is derived in closed form. The data combination reduces the data volume and computing time in the filtering process for parameter estimation by a factor of 4 while preserving the full data strength for precise positioning. The resulting single data stream is that of carrier phase measurements with both data noise and bias uncertainty strictly defined. With this mathematical formula the single stream of optimally combined GPS measurements can be efficiently formed by simple numerical calculations. Carrier phase ambiguity resolution, when feasible, is strengthened due to the preserved full data strength with the optimally combined data and the resulting longer wavelength for the ambiguity to be resolved.

Wu, Sien-Chong↗

Application of the multigrid solution technique to hypersonic entry vehicles

A multigrid solution procedure has been incorporated in a version of the Langley Aerothermodynamic Upwind Relaxation Algorithm. The multigrid scheme is based on the Full Approximation Storage approach and uses Full Multigrid to obtain a well defined fine mesh starting solution. Predictions were obtained using standard transfer operators and a 'V-cycle' was used to control grid sequencing. Computed hypersonic flow solutions compared with experimental data for a 15 degree sphere cone, blended-wing body, and shuttle-like geometries are presented. It is shown that the algorithm accurately predicts heating rates, and when compared with the single grid algorithm computes solutions in one-third the computational time.

Greene, Francis A.↗

A fast recursive algorithm for molecular dynamics simulation

The present recursive algorithm for solving molecular systems' dynamical equations of motion employs internal variable models that reduce such simulations' computation time by an order of magnitude, relative to Cartesian models. Extensive use is made of spatial operator methods recently developed for analysis and simulation of the dynamics of multibody systems. A factor-of-450 speedup over the conventional O(N-cubed) algorithm is demonstrated for the case of a polypeptide molecule with 400 residues.

Jain, A.↗

Aerodynamic shape optimization using preconditioned conjugate gradient methods

In an effort to further improve upon the latest advancements made in aerodynamic shape optimization procedures, a systematic study is performed to examine several current solution methodologies as applied to various aspects of the optimization procedure. It is demonstrated that preconditioned conjugate gradient-like methodologies dramatically decrease the computational efforts required for such procedures. The design problem investigated is the shape optimization of the upper and lower surfaces of an initially symmetric (NACA-012) airfoil in inviscid transonic flow and at zero degree angle-of-attack. The complete surface shape is represented using a Bezier-Bernstein polynomial. The present optimization method then automatically obtains supercritical airfoil shapes over a variety of freestream Mach numbers. Furthermore, the best optimization strategy examined resulted in a factor of 8 decrease in computational time as well as a factor of 4 decrease in memory over the most efficient strategies in current use.

Burgreen, Greg W.↗

The optical counterpart of the bright nearby millisecond pulsar PSR J0437-4715

Optical imaging of the field of PSR J0437-4715 reveals a candidate optical counterpart less than 1 arcsec from the radio source location. The color and magnitude of this star are consistent with a 0.2-solar mass helium white dwarf with T(eff) about 4400 K at a distance of 150 parsecs. Such an object is expected as the binary companion of the neutron star, given the orbital characteristics determined from the radio observations. The cooling time for the white dwarf is greater than the characteristic spin-down age of the pulsar, which suggests that, in some cases, spin-down times computed from pulsar periods and period derivatives may not in fact represent an upper limit to the pulsar age. No luminosity variations over the orbital period are observed, down to a limit of a few tenths of a magnitude.

Bailyn, Charles D.↗

Application of a neural network to simulate analysis in an optimization process

A new experimental software package called NETS/PROSSS aimed at reducing the computing time required to solve a complex design problem is described. The software combines a neural network for simulating the analysis program with an optimization program. The neural network is applied to approximate results of a finite element analysis program to quickly obtain a near-optimal solution. Results of the NETS/PROSSS optimization process can also be used as an initial design in a normal optimization process and make it possible to converge to an optimum solution with significantly fewer iterations.

Rogers, James L.↗

Light scattering by size-shape distributions of randomly oriented axially symmetric particles of a size comparable to a wavelength

Rigorously light scattering by size-shape distributions of randomly oriented axially symmetric particles are calculated by the T-matrix method, as extended to randomly oriented scatterers. The computational scheme is described along with a newly developed convergence procedure that makes it possible to substantially reduce computer time and storage requirements. The elements of the Stokes scattering matrix for a power-law size distribution of randomly oriented moderately aspherical spheroids are shown to be much smoother than and differ substantially from those of equivalent monodisperse spheroids; averaging over orientations does not eliminate the necessity of averaging over particle sizes. The angular-scattering behavior of the ensembles of nonspherical particles is found to be significantly different from that of the equivalent polydisperse spheres.

Mishchenko, Michael I.↗

Experiment and simulation for CSI: What are the missing links?

Viewgraphs on experiment and simulation for control structure interaction (CSI) are presented. Topics covered include: control structure interaction; typical control/structure interaction system; CSI problem classification; actuator/sensor models; modeling uncertainty; noise models; real-time computations; and discrete versus continuous.

Belvin, W. Keith↗

Anticipatory Neurofuzzy Control

Technique of feedback control, called "anticipatory neurofuzzy control," developed for use in controlling flexible structures and other dynamic systems for which mathematical models of dynamics poorly known or unknown. Superior ability to act during operation to compensate for, and adapt to, errors in mathematical model of dynamics, changes in dynamics, and noise. Also offers advantage of reduced computing time. Hybrid of two older fuzzy-logic control techniques: standard fuzzy control and predictive fuzzy control.

Mccullough, Claire L.↗