Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “baseline program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

SU-E-J-262: Variability in Texture Analysis of Gynecological Tumors in the Context of An 18F-FDG PET Adaptive Protocol

Purpose: This study examines the effect on texture analysis due to variable reconstruction of PET images in the context of an adaptive FDG PET protocol for node positive gynecologic cancer patients. By measuring variability in texture features from baseline and intra-treatment PET-CT, we can isolate unreliable texture features due to large variation. Methods: A subset of seven patients with node positive gynecological cancers visible on PET was selected for this study. Prescribed dose varied between 45–50.4Gy, with a 55–70Gy boost to the PET positive nodes. A baseline and intratreatment (between 30–36Gy) PET-CT were obtained on a Siemens Biograph mCT. Each clinical PET image set was reconstructed 6 times using a TrueX+TOF algorithm with varying iterations and Gaussian filter. Baseline and intra-treatment primary GTVs were segmented using PET Edge (MIM Software Inc., Cleveland, OH), a semi-automatic gradient-based algorithm, on the clinical PET and transferred to the other reconstructed sets. Using an in-house MATLAB program, four 3D texture matrices describing relationships between voxel intensities in the GTV were generated: co-occurrence, run length, size zone, and neighborhood difference. From these, 39 textural features characterizing texture were calculated in addition to SUV histogram features. The percent variability among parameters was first calculated. Each reconstructed texture feature from baseline and intra-treatment per patient was normalized to the clinical baseline scan and compared using the Wilcoxon signed-rank test in order to isolate variations due to reconstruction parameters. Results: For the baseline scans, 13 texture features showed a mean range greater than 10%. For the intra scans, 28 texture features showed a mean range greater than 10%. Comparing baseline to intra scans, 25 texture features showed p <0.05. Conclusion: Variability due to different reconstruction parameters increased with treatment, however, the majority of texture features showed significant changes during treatment independent of reconstruction effects.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1996

The Attributes of a Variable-Diameter Rotor System Applied to Civil Tiltrotor Aircraft

The attributes of a variable diameter rotor concept applied to civil tiltrotor aircraft are investigated using the V/STOL aircraft sizing and performance computer program (VASCOMP). To begin, civil tiltrotor viability issues that motivate advanced rotor designs are discussed. Current work on the variable diameter rotor and a theoretical basis for the advantages of the rotor system are presented. The size and performance of variable diameter and conventional tiltrotor designs for the same baseline mission are then calculated using a modified NASA Ames version of VASCOMP. The aircraft are compared based on gross weight, fuel required, engine size, and autorotative performance for various hover disk loading values. Conclusions about the viability of the resulting designs are presented and a program for further variable diameter rotor research is recommended.

Brender, Scott↗
NASA NTRS1976

Generalized EC&LSS computer program configuration control

The generalized environmental control and life support system (ECLSS) computer program (G189A) simulation of the shuttle orbiter ECLSS was upgraded. The G189A component model configuration was changed to represent the current PV102 and subsequent vehicle ECLSS configurations as defined by baseline ARS and ATCS schematics. The diagrammatic output schematics of the gas, water, and freon loops were also revised to agree with the new ECLSS configuration. The accuracy of the transient analysis was enhanced by incorporating the thermal mass effects of the equipment, structure, and fluid in the ARS gas and water loops and in the ATCS freon loops. The sources of the data used to upgrade the simulation are: (1) ATCS freon loop line sizes and lengths; (2) ARS water loop line sizes and lengths; (3) ARS water loop and ATCS freon loop component and equipment weights; and (4) ARS cabin and avionics bay thermal capacitance and conductance values. A single G189A combination master program library tape was generated which contains all of the master program library versions which were previously maintained on separate tapes. A new component subroutine, PIPETL, was developed and incorporated into the G189A master program library.

Blakely, R. L.↗
NASA NTRS2011

Seal Joint Analysis and Design for the Ares-I Upper Stage LOX Tank

The sealing capability of the Ares-I Upper Stage liquid oxygen tank-to-sump joint is assessed by analyzing the deflections of the joint components. Analyses are performed using three-dimensional symmetric wedge finite element models and the ABAQUS commercial finite element software. For the pressure loads and feedline interface loads, the analyses employ a mixed factor of safety approach to comply with the Constellation Program factor of safety requirements. Naflex pressure-assisted seals are considered first because they have been used successfully in similar seal joints in the Space Shuttle External Tank. For the baseline sump seal joint configuration with a Naflex seal, the predicted joint opening greatly exceeds the seal design specification. Three redesign options of the joint that maintain the use of a Naflex seal are studied. The joint openings for the redesigned seal joints show improvement over the baseline configuration; however, these joint openings still exceed the seal design specification. RACO pressure-assisted seals are considered next because they are known to also be used on the Space Shuttle External Tank, and the joint opening allowable is much larger than the specification for the Naflex seals. The finite element models for the RACO seal analyses are created by modifying the models that were used for the Naflex seal analyses. The analyses show that the RACO seal may provide sufficient sealing capability for the sump seal joint. The results provide reasonable data to recommend the design change and plan a testing program to determine the capability of RACO seals in the Ares-I Upper Stage liquid oxygen tank sump seal joint.

Phillips, Dawn R.↗
DOE OSTI2018

Optimizing adiabatic quantum program compilation using a graph-theoretic framework

Adiabatic quantum computing has evolved in recent years from a theoretical field into an immensely practical area, a change partially sparked by D-Wave System’s quantum annealing hardware. These multimillion-dollar quantum annealers offer the potential to solve optimization problems millions of times faster than classical heuristics, prompting researchers at Google, NASA and Lockheed Martin to study how these computers can be applied to complex real-world problems such as NASA rover missions. Unfortunately, compiling (embedding) an optimization problem into the annealing hardware is itself a difficult optimization problem and a major bottleneck currently preventing widespread adoption. Additionally, while finding a single embedding is difficult, no generalized method is known for tuning embeddings to use minimal hardware resources. To address these barriers, we introduce a graph-theoretic framework for developing structured embedding algorithms. Using this framework, we introduce a biclique virtual hardware layer to provide a simplified interface to the physical hardware. Additionally, we exploit bipartite structure in quantum programs using odd cycle transversal (OCT) decompositions. By coupling an OCT-based embedding algorithm with new, generalized reduction methods, we develop a new baseline for embedding a wide range of optimization problems into fault-free D-Wave annealing hardware. Furthermore, to encourage the reuse and extension of these techniques, we provide an implementation of the framework and embedding algorithms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

State of Knowledge on Aerosols and Bubble Transport for Mechanistic Source Term Analysis of Molten Salt Reactors

A comprehensive review of the current state of knowledge surrounding molten salt aerosol behavior and bubble transport in molten salt systems relevant to mechanistic source term (MST) analyses of molten salt reactors (MSR) and fluoride high temperature reactors (FHR) was provided. Although relatively little experimental work has been carried out on investigating these phenomena in molten salts compared to that for other nuclear fluids of interest (e.g., aqueous, sodium), the amount of work that has been reported still provides a baseline understanding to inform and design future experimental campaigns on these topics. The bulk of this data is derived from the Molten Salt Reactor Program (MSRP) which was carried out at Oak Ridge National Laboratory (ORNL) nearly 50 years ago, leading to the successful operation of the Molten Salt Reactor Experiment (MSRE). Many other related research efforts are also highlighted in this review, such as recent efforts under the DOE:NE Advanced Reactor Technology (ART) MSR Campaign. The goal of this report is to provide a foundation for modelers to base assumptions on, as well as to make recommendations to experimentalists attempting to close information gaps. As such, Section 4 contains recommendations for future experimental work that may be needed to close current information gaps related to MST modeling of MSRs. Additionally, given the flowing fuel nature of MSRs, the relevance of aerosol and bubble transport behavior in molten salts goes beyond just MST modeling, evidenced by experiences with the pump bowl and off-gas system of the MSRE.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Integral Experiment Final Design for Thermal/Epithermal eXperiments with 233U3O8 ZPR Fuel Elements and Polyethylene (IER-329 CED-2 Report)

This report documents the integral experiment final design for IER-329, Thermal/Epithermal eXperiments (TEX) with 233 U 3 O 8 Zero Power Reactor (ZPR) Fuel Elements and Polyethylene. IER-329 (TEX-23) is the third baseline design in the Thermal/Epithermal eXperiments (TEX) series led by Lawrence Livermore National Laboratory (LLNL) and funded by the DOE’s Nuclear Criticality Safety Program. This experiment was designed to address the existing 233U integral benchmark experiments over prediction in k eff by up to 2% for thermal systems and under-prediction in k eff by up to 4% for intermediate systems. The TEX-23 design utilizes assemblies of 233 U 3 O 8 Zero Power Reactor (ZPR) fuel elements moderated and reflected by high-density polyethylene. This design is similar to the existing TEX-Pu and TEX-HEU designs, utilizing an adjustable moderator to tune the neutron energy spectra and modular layers for the incorporation of diluent materials.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1975

Star tracker constraint violations digital capability description and analysis results. Mission planning, mission analysis, and software formulation

Results of star tracker constraint violation analyses performed with the digital computer program Shuttle Attitude and Pointing Time Line Processor (SAPT) are presented. Results are typical of those utilized to provide the information required to update Baseline Reference Mission Attitude and Pointing Time Lines. Descriptions of SAPT modifications implemented to perform these analyses are also presented.

Poston, P. L.↗
NASA NTRS1981

Subsonic/supersonic nonvectored aeropropulsive characteristics of nonaxisymmetric nozzles installed on an F-18 model

An experimental program on a model of the F-18 airplane has been conducted to determine the performance of nonaxisymmetric nozzles relative to the aircraft's baseline axisymmetric nozzle at Mach numbers from 0.60 to 2.20. The performance of a two-dimensional convergent-divergent nozzle, a single expansion ramp nozzle (ADEN) and a wedge nozzle were compared to the baseline axisymmetric nozzles. The nonaxisymmetric nozzles (except ADEN) were designed for vectoring and reversing. The axisymmetric nozzle did not have these capabilities. The comparisons presented here are for the nozzles in their full forward thrust mode and for the aircraft at zero angle of attack. The results demonstrate that nonaxisymmetric nozzles can be installed on a close-spaced twin engine fighter with equal or higher performance than the axisymmetric nozzle over the range of Mach numbers tested.

Capone, F. J.↗
NASA NTRS1981

Advanced 30/20 GHz communication satellites

Increasing demands for satellite communications channels have filled the C-band, have begun to fill the Ku-band, and have resulted in a developmental effort to utilize 2.5 GHz of the 30/20 GHz Ka band. Problems of rain attenuation in the Ku and Ka bands are explored, and solutions are indicated in the use of antenna gain coupled with ground terminal site diversity, and higher satellite power capabilities. Tradeoffs in satellite design are focused on the number of reflectors, increased f/d, gain and sidelobe performance, and total satellite capacity. The NASA 20/30 GHz program is described, including design features of two test systems to be launched in the 1980's to examine the functioning limits of two baseline systems.

Sivo, J. N.↗
NASA NTRS1984

Characterization of PMR polyimide resin and prepreg

Procedures for the chemical characterization of PMR-15 resin solutions and graphite-reinforced prepregs were developed, and a chemical data base was established. In addition, a basic understanding of PMR-15 resin chemistry was gained; this was translated into effective processing procedures for the production of high quality graphite composites. During the program the PMR monomers and selected model compounds representative of postulated PMR-15 solution chemistry were acquired and characterized. Based on these data, a baseline PMR-15 resin was formulated and evaluated for processing characteristics and composite properties. Commercially available PMR-15 resins were then obtained and chemically characterized. Composite panels were fabricated and evaluated.

Lindenmeyer, P. H.↗
NASA NTRS1991

Modeling of advanced ECLSS/ARS with ASPEN

System-level ASPEN models were developed for the CO2 partial reduction subsystem and a bioregenerative life support subsystem (BRLSS). The individual component and subsystem models were integrated into three different system-level atmospheric revitalization subsystem (ARS) models: baseline physico-chemical, BRLSS, and partial reduction of Martian CO2. The Aspen models were based on FORTRAN interfaces necessary for integration with another program, G189A, to perform quasi-transient modeling. Detailed reactor models were prepared for the two CO2 reduction reactors (Bosch and Advanced Carbon Formation), and the low-temperature trace contaminant oxidation reactor.

Kolodney, M.↗
NASA NTRS1993

Computation of the Fluid and Optical Fields About the Stratospheric Observatory for Infrared Astronomy (SOFIA) and the Coupling of Fluids, Dynamics, and Control Laws on Parallel Computers

The June 1992 to May 1993 grant NCC-2-677 provided for the continued demonstration of Computational Fluid Dynamics (CFD) as applied to the Stratospheric Observatory for Infrared Astronomy (SOFIA). While earlier grant years allowed validation of CFD through comparison against experiments, this year a new design proposal was evaluated. The new configuration would place the cavity aft of the wing, as opposed to the earlier baseline which was located immediately aft of the cockpit. This aft cavity placement allows for simplified structural and aircraft modification requirements, thus lowering the program cost of this national astronomy resource. Three appendices concerning this subject are presented.

Atwood, Christopher A.↗
NASA NTRS1995

Environmentally regulated aerospace coatings

Aerospace coatings represent a complex technology which must meet stringent performance requirements in the protection of aerospace vehicles. Topcoats and primers are used, primarily, to protect the structural elements of the air vehicle from exposure to and subsequent degradation by environmental elements. There are also many coatings which perform special functions, i.e., chafing resistance, rain erosion resistance, radiation and electric effects, fuel tank coatings, maskants, wire and fastener coatings. The scheduled promulgation of federal environmental regulations for aerospace manufacture and rework materials and processes will regulate the emissions of photochemically reactive precursors to smog and air toxics. Aerospace organizations will be required to identify, qualify and implement less polluting materials. The elimination of ozone depleting chemicals (ODC's) and implementation of pollution prevention requirements are added constraints which must be addressed concurrently. The broad categories of operations affected are the manufacture, operation, maintenance, and repair of military, commercial, general aviation, and space vehicles. The federal aerospace regulations were developed around the precept that technology had to be available to support the reduction of organic and air toxic emissions, i.e., the regulations cannot be technology forcing. In many cases, the regulations which are currently in effect in the South Coast Air Quality Management District (SCAQMD), located in Southern California, were used as the baseline for the federal regulations. This paper addresses strategies used by Southern California aerospace organizations to cope with these regulatory impacts on aerospace productions programs. All of these regulatory changes are scheduled for implementation in 1993 and 1994, with varying compliance dates established.

Morris, Virginia L.↗
NASA NTRS2000

International "Intercomparison of 3-Dimensional (3D) Radiation Codes" (13RC)

An international "Intercomparison of 3-dimensional (3D) Radiation Codes" 13RC) has been initiated. It is endorsed by the GEWEX Radiation Panel, and funded jointly by the United States Department of Energy ARM program, and by the National Aeronautics and Space Administration Radiation Sciences program. It is a 3-phase effort that has as its goals to: (1) understand the errors and limits of 3D methods; (2) provide 'baseline' cases for future 3D code development; (3) promote sharing of 3D tools; (4) derive guidelines for 3D tool selection; and (5) improve atmospheric science education in 3D radiation.

Cahalan, Robert F.↗
NASA NTRS2003

Multiple Changes to Reusable Solid Rocket Motors, Identifying Hidden Risks

The Space Shuttle Reusable Solid Rocket Motor (RSRM) baseline is subject to various changes. Changes are necessary due to safety and quality improvements, environmental considerations, vendor changes, obsolescence issues, etc. The RSRM program has a goal to test changes on full-scale static test motors prior to flight due to the unique RSRM operating environment. Each static test motor incorporates several significant changes and numerous minor changes. Flight motors often implement multiple changes simultaneously. While each change is individually verified and assessed, the potential for changes to interact constitutes additional hidden risk. Mitigating this risk depends upon identification of potential interactions. Therefore, the ATK Thiokol Propulsion System Safety organization initiated the use of a risk interaction matrix to identify potential interactions that compound risk. Identifying risk interactions supports flight and test motor decisions. Uncovering hidden risks of a full-scale static test motor gives a broader perspective of the changes being tested. This broader perspective compels the program to focus on solutions for implementing RSRM changes with minimal/mitigated risk. This paper discusses use of a change risk interaction matrix to identify test challenges and uncover hidden risks to the RSRM program.

Greenhalgh, Phillip O.↗
NASA NTRS1997

A Study of the Effects of Blade Shape on Rotor Noise

A new rotor noise prediction system called the Tiltrotor Aeroacoustic Code (TRAC) has been developed under the Short Haul (Civil Tiltrotor) program between NASA, the Army, and the U.S. helicopter industry. This system couples the comprehensive rotorcraft code CAMRAD.Mod1 with either the high resolution sectional loads code HIRES or the full potential CFD code FPRBVI to predict unsteady blade loads, which are then input to the noise prediction program WOPWOP. In this paper, HIRES will be used to predict the blade-vortex interaction (BVI) noise trends associated with blade shape. The baseline shape selected was a 17% scale model of a contemporary design 4 bladed rotor. Measurements for this rotor were acquired in the Duits-Nederslandse Windtunnel (DNW). The code is used to predict noise for the base configuration and the results are compared to the measured data. This provides a firm foundation for investigating the BVI noise trends associated with blade shape. The shapes selected for study are based on variation of sweep and taper which reflect plausible "passive" design concepts. Comparisons of power required, integrated noise, and aerodynamics are made and important trends are noted.

Jones, Henry E.↗
NASA NTRS2004

The Generation-X X-ray Observatory Vision Mission and Technology Study

The new frontier in astrophysics is the study of the birth and evolution of the first stars, galaxies and black holes in the early Universe. X-ray astronomy opens a window into these objects by studying the emission from black holes, supernova explosions and the gamma-ray burst afterglows of massive stars. However, such objects are beyond the grasp of current or near-future observatories. X-ray imaging and spectroscopy of such distant objects will require an X-ray telescope with large collecting area and high angular resolution. Our team has conceived the Generation-X Vision Mission based on an X-ray observatory with 100 sq m collecting area at 1 keV (1000 times larger than Chandra) and 0.1 arcsecond angular resolution (several times better than Chandra and 50 times better than the Constellation-X resolution goal). Such an observatory would be capable of detecting the earliest black holes and galaxies in the Universe, and will also study extremes of density, gravity, magnetic fields, and kinetic energy which cannot be created in laboratories. NASA has selected the Generation-X mission for study under its Vision Mission Program. We describe the studies being performed to develop the mission concept and define candidate technologies and performance requirements for Generation-X. The baseline Generation-X mission involves four 8m diameter X-ray telescopes operating at Sun-Earth L2. We trade against an alternate concept of a single 26m diameter telescope with focal plane instruments on a separate spacecraft. A telescope of this size will require either robotic or human-assisted in-flight assembly. The required effective area implies that extremely lightweight grazing incidence X-ray optics must be developed. To achieve the required aerial density of at least 100 times lower than in Chandra, we will study 0.1mm thick mirrors which have active on-orbit figure control. We discuss the suite of required detectors, including a large FOV high angular resolution imager, a cryogenic imaging spectrometer and a grating spectrometer. We outline the development roadmap to confront the many technological challenges far implementing the Generation-X mission.

Figueroa-Feliciano, Enectali↗