Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “barriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Are Al{sub 2}O{sub 3} and MgO tunnel barriers suitable for spin injection in graphene?

We report on the structural impact on graphene and multi-layers graphene of the growth by sputtering of tunnel barriers. Sputtered Al{sub 2}O{sub 3} and MgO barriers were chosen for their well-known efficiency as spin injectors in spintronics devices. The impact of the growth on the structure of graphene and up to 4-layer flakes was analyzed by Raman spectroscopy. This study reveals that for Al{sub 2}O{sub 3} growth, the impact is moderate for a monolayer and decreases sharply for bilayers and above. In the case of MgO all the flakes underwent a strong amorphization. Moreover, this reveals that while single layer graphene is believed to offer the best spin transport properties, the better robustness of multilayer graphene may ultimately make it a better choice for spintronics devices.

36 MATERIALS SCIENCE↗

Barrier distributions for the {sup 7}Li+{sup 27}Al reaction

Barrier distributions can be obtained from the first derivative of the elastic and quasielastic (QEL) backward angle excitation functions [1]. In this work we present a study of the barrier distribution for the {sup 7}Li+{sup 27}Al reaction from a Coupled-Channels Born Approximation (CCBA) calculations using the code FRESCO [2].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Low O{sub 2} dissociation barrier on Pt(111) due to adsorbate-adsorbate interactions

O{sub 2} dissociation on Pt(111) has been followed at low and saturation coverage using temperature-programmed x-ray photoelectron spectroscopy and simulated with mean-field kinetic modeling, yielding dissociation (E{sub a}) and desorption (E{sub d}) barriers of 0.32 and 0.36 eV, respectively. Density functional theory calculations show that E{sub a} is strongly influenced by the O-O interatomic potential in the atomic final state: of the supercells considered, that which maximizes attractive third-nearest-neighbor interactions in the atomic final state yields both the lowest computed dissociation barrier (0.24 eV) and the best agreement with experiment. It is proposed that the effect of adsorbate-adsorbate interactions must be considered when modeling catalytic processes involving dissociative steps.

36 MATERIALS SCIENCE↗

Tuning the electron injection barrier between Co and C{sub 60} using Alq{sub 3} buffer layer

We demonstrate that the electron injection barrier ({Delta}{sub e}) between Co and C{sub 60} can be tuned by inserting a thin Alq{sub 3} interlayer. Using ultraviolet photoemission spectroscopy, {Delta}{sub e} of C{sub 60} on Alq{sub 3}-predecorated Co ({Delta}{sub e}=0.3 eV) was found to be reduced by 0.3 eV compared with that of C{sub 60} deposited directly on the bare Co metal surface ({Delta}{sub e}=0.6 eV). Due to Fermi level pining at the Alq{sub 3}/Co interface, this tuning effect is independent of the thickness of Alq{sub 3} interlayer from multilayer to monolayer. Based on the experimental results, band level alignment diagrams are proposed for C{sub 60}/Co and C{sub 60}/Alq{sub 3}/Co interfaces with two different Alq{sub 3} thicknesses. Our findings could have potential applications for the reduction in the carrier injection barrier in organic spin valves.

36 MATERIALS SCIENCE↗

Evaluation of barrier uniformity in magnetic tunnel junctions prepared using natural oxidation of thin Mg layers

We fabricated submicron magnetic tunnel junctions (MTJs) using natural oxidation of thin Mg layers deposited by dc sputtering. The MTJs exhibited magnetoresistance (MR) ratios of up to about 150% with a low resistance-area product (R{sub p}A) of 8 {Omega} {mu}m{sup 2}, which are comparable to those for radio-frequency-sputtered MgO barriers. The submicron MTJs had highly variable MR and R{sub p}A values due to a high pinhole density (20 {mu}m{sup -2}) in the barriers, whereas current-in-plane-tunneling (CIPT) measurements on the same MTJ films revealed highly reproducible MR and R{sub p}A values. This indicates that reproducible CIPT measurements do not necessarily give accurate results of MR and R{sub p}A at high pinhole densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application Of Ti-Based Self-Formation Barrier Layers To Cu Dual-Damascene Interconnects

Cu interconnects have been used extensively in ULSI devices. However, large resistance-capacitance delay and poor device reliability have been critical issues as the device feature size has reduced to nanometer scale. In order to achieve low resistance and high reliability of Cu interconnects, we have applied a thin Ti-based self-formed barrier (SFB) using Cu(Ti) alloy seed to 45nm-node dual damascene interconnects and evaluated its performance. The line resistance and via resistance decreased significantly, compared with those of conventional Ta/TaN barriers. The stress migration performance was also drastically improved using the SFB process. A performance of time dependent dielectric breakdown revealed superior endurance. These results suggest that the Ti-based SFB process is one of the most promising candidates for advanced Cu interconnects. TEM and X-ray photoelectron spectroscopy observations for characterization of the Ti-based SFB structure were also performed. The Ti-based SFB consisted of mainly amorphous Ti oxides. Amorphous or crystalline Ti compounds such as TiC, TiN, and TiSi formed beneath Cu alloy films, and the formation varied with dielectric.

36 MATERIALS SCIENCE↗

Transport Properties of a Kinetic Model for Chemical Reactions without Barriers

A kinetic model of the Boltzmann equation for chemical reactions without energy barrier is considered here with the aim of evaluating the reaction rate and characterizing the transport coefficient of shear viscosity for the reactive system. The Chapman-Enskog solution of the Boltzmann equation is used to compute the chemical reaction effects, in a flow regime for which the reaction process is close to the final equilibrium state. Some numerical results are provided illustrating that the considered chemical reaction without energy barrier can induce an appreciable influence on the reaction rate and on the transport coefficient of shear viscosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pattern formation in dielectric barrier discharges with different dielectric materials

The influence of dielectric material on the bifurcation and spatiotemporal dynamics of the patterns in dielectric barrier discharge in argon/air at atmospheric pressure is studied. It is found that pattern bifurcation sequences are different with different dielectric materials. The spatiotemporal dynamics of the hexagonal pattern in dielectric barrier discharge depends on the dielectric material. The hexagon pattern with glass dielectric is an interleaving of two rectangular sublattices appearing at different moments. The hexagon pattern with quartz dielectric is composed of one set of hexagonal lattice discharging twice in one half cycle of the applied voltage, one is at the rising edge and the other at the falling edge. It results in that the accumulation of wall charges in individual microdischarges in a hexagon pattern with quartz dielectric is greater than that with glass dielectric, which is in agreement with the electron density measurement by Stark broadening of Ar I 696.54 nm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of atmospheric pressure diffuse nanosecond pulsed dielectric barrier discharge using the array needles-plate electrode in air

In this paper, a bidirectional high pulse voltage with 20 ns rising time is employed to generate an atmospheric pressure diffuse dielectric barrier discharge using the array needles-plate electrode configuration. Both double needle and multiple needle electrode configurations nanosecond pulsed dielectric barrier discharges are investigated. It is found that a diffuse discharge plasma with low gas temperature can be obtained, and the plasma volume increases with the increase of the pulse peak voltage, but remains almost constant with the increase of the pulse repetition rate. In addition to showing the potential application on a topographically nonuniform surface treatment of the discharge, the multiple needle-plate electrode configuration with different needle-plate electrode gaps are also employed to generate diffuse discharge plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of Nitrogen Gas Flow Rate on the Electrical Behavior of an Atmospheric Pressure Dielectric Barrier Jet Discharge

The dielectric barrier discharge configuration used consists of a hemispherical electrode insulated by 1 mm thick borosilicate glass and a grounded plate with a hole through which the jet is formed externally in the surrounding air. The effect of gas flow rate on the behavior of an atmospheric pressure dielectric barrier jet discharge was studied for different air-gap distance and drive voltage, V{sub DD}, to the MOSFET. It is found that at higher rate of nitrogen gas flow, the current spikes reduce in number when the driving voltage and air-gap distance are kept constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Edge energy transport barrier and turbulence in the I-mode regime on Alcator C-Mod

We report extended studies of the I-mode regime [Whyte et al., Nucl. Fusion 50, 105005 (2010)] obtained in the Alcator C-Mod tokamak [Marmar et al., Fusion Sci. Technol. 51(3), 3261 (2007)]. This regime, usually accessed with unfavorable ion B x {nabla}B drift, features an edge thermal transport barrier without a strong particle transport barrier. Steady I-modes have now been obtained with favorable B x {nabla}B drift, by using specific plasma shapes, as well as with unfavorable drift over a wider range of shapes and plasma parameters. With favorable drift, power thresholds are close to the standard scaling for L-H transitions, while with unfavorable drift they are {approx} 1.5-3 times higher, increasing with I{sub p}. Global energy confinement in both drift configurations is comparable to H-mode scalings, while density profiles and impurity confinement are close to those in L-mode. Transport analysis of the edge region shows a decrease in edge {chi}{sub eff}, by typically a factor of 3, between L- and I-mode. The decrease correlates with a drop in mid-frequency fluctuations (f{approx} 50-150 kHz) observed on both density and magnetics diagnostics. Edge fluctuations at higher frequencies often increase above L-mode levels, peaking at f{approx} 250 kHz. This weakly coherent mode is clearest and has narrowest width ({Delta}f/f{approx} 0.45) at low q{sub 95} and high T{sub ped}, up to 1 keV. The E{sub r} well in I-mode is intermediate between L- and H-mode and is dominated by the diamagnetic contribution in the impurity radial force balance, without the V{sub pol} shear typical of H-modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The cold and atmospheric-pressure air surface barrier discharge plasma for large-area sterilization applications

This letter reports a stable air surface barrier discharge device for large-area sterilization applications at room temperature. This design may result in visually uniform plasmas with the electrode area scaled up (or down) to the required size. A comparison for the survival rates of Escherichia coli from air, N{sub 2} and O{sub 2} surface barrier discharge plasmas is presented, and the air surface plasma consisting of strong filamentary discharges can efficiently kill Escherichia coli. Optical emission measurements indicate that reactive species such as O and OH generated in the room temperature air plasmas play a significant role in the sterilization process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diagnosis of the ion density in two discharge modes generated in atmospheric pressure argon with pin-to-plate dielectric barrier geometry

In this study, the ion densities of an ac dielectric barrier discharge (DBD) (that is, a pin-to-plate DBD) as a function of the applied frequency in argon have been studied by means of the plasma radiation. The pin-to-plate DBD shows the characteristic of radiation oscillations with a low-frequency wave hidden in a high-frequency wave to form a mosaic structure, which reveals the coexistence of two discharge modes in the ac barrier discharge, i.e., the streamer mode and the corona mode. According to the oscillation frequencies, the ion densities are calculated. The results show that the ion density in streamer discharge is higher than that in corona discharge for about 1-2 magnitude orders.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sub-barrier Fusion and Breakup of Light Halo Nuclei

In this work we present new data for the sub-barrier fusion of the system {sup 6}He+{sup 206}Pb obtained in the Centre de Recherches du Cyclotron (UCL), in Louvain-la-Neuve, Belgium. The preliminary results suggest the absence of fusion enhancement at sub-barrier energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elastic scattering of {sup 9}Li on {sup 208}Pb at energies around the Coulomb barrier

We have studied the dynamical effects of the halo structure of {sup 11}Li on the scattering on heavy targets at energies around the Coulomb barrier. This experiment was performed at ISAC-II at TRIUMF with a world record in production of the post-accelerated {sup 11}Li beam. As part of this study we report here on the first measurement of the elastic cross section of the core nucleus, i.e. {sup 9}Li on {sup 208}Pb, at energies around the Coulomb barrier. A preliminary optical model analysis has been performed in order to extract a global optical potential to describe the measured angular distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

X-ray photoelectron spectroscopy investigation of the Schottky barrier at low-k a-SiO(C):H/Cu interfaces

In order to understand the fundamental mechanisms involved in electrical leakage in low-k/Cu interconnects, we have utilized x-ray photoelectron spectroscopy to determine the Schottky barrier present at interfaces formed by plasma enhanced chemical vapor deposition of low-k a-SiO{sub x}C{sub y}:H thin films on polished Cu substrates. We find the Schottky Barrier at this interface to range widely from 1 to >4 eV and to be dependent on the amount of network carbon incorporated into the a-SiOC:H thin films.

36 MATERIALS SCIENCE↗

ZnO/(ZnMg)O single quantum wells with high Mg content graded barriers

ZnO/Zn{sub 1-x}Mg{sub x}O single quantum wells (SQWs) were grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates. Compositional grading allows the application of optimized growth conditions for the fabrication of Zn{sub 1-x}Mg{sub x}O barriers with high crystalline quality and a maximum Mg content of x = 0.23. High resolution x-ray diffraction reveals partial relaxation of the graded barriers. Due to exciton localization, the SQW emission is found to consist of contributions from donor-bound and free excitons. While for narrow SQWs with well width d{sub W}{<=}2.5nm, the observed increase of the exciton binding energy is caused by quantum confinement, the drop of the photoluminescence emission below the ZnO bulk value found for wide SQWs is attributed to the quantum-confined Stark effect. For a Mg content of x = 0.23, a built-in electric field of 630 kV/cm is extracted, giving rise to a decrease of the exciton binding energy and rapid thermal quenching of the SQW emission characterized by an activation energy of (24 {+-} 4) meV for d{sub W} = 8.3 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spontaneously intermixed Al-Mg barriers enable corrosion-resistant Mg/SiC multilayer coatings

Magnesium/silicon carbide (Mg/SiC) has the potential to be the best-performing reflective multilayercoating in the 25–80 nm wavelength region but suffers from Mg-related corrosion, an insidious problem which completely degrades reflectance. We have elucidated the origins and mechanisms of corrosion propagation within Mg/SiC multilayers. Based on our findings, we have demonstrated an efficient and simple-to-implement corrosion barrier for Mg/SiC multilayers. In conclusion, the barrier consists of nanometer-scale Mg and Al layers that intermix spontaneously to form a partially amorphous Al-Mg layer and is shown to prevent atmospheric corrosion while maintaining the unique combination of favorable Mg/SiC reflective properties.

36 MATERIALS SCIENCE↗