Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structural changes induced by electric currents in a single crystal of Pr 2 CuO 4

We demonstrate an approach to the structural and electronic property modification of perovskites, focusing on Pr 2 CuO 4 , an undoped parent compound of a class of electron-doped copper-oxide superconductors. Currents were passed parallel or perpendicular to the copper oxygen layers with the voltage ramped up until a rapid drop in the resistivity was achieved, a process referred to as “flash.” The current was then further increased tenfold in current-control mode. This state was quenched by immersion into liquid nitrogen. Flash can drive many compounds into different atomic structures with new properties, whereas the quench freezes them into a long-lived state. Single-crystal neutron diffraction of as-grown and modified Pr 2 CuO 4 revealed a √10 ×√10 superlattice due to oxygen-vacancy order. The diffraction peak intensities of the superlattice of the modified sample were significantly enhanced relative to the pristine sample. Raman-active phonons in the modified sample were considerably sharper. Measurements of electrical resistivity, magnetization, and two-magnon Raman scattering indicate that the modification affected only the Pr-O layers, but not the Cu-O planes. These results point to enhanced oxygen-vacancy order in the modified samples well beyond what can be achieved without passing electrical current. Our work opens a new avenue toward electric field/quench control of structure and properties of layered perovskite oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface

Efficient electrocatalysts for the oxygen evolution reaction (OER) are paramount to the development of electrochemical devices for clean energy and fuel conversion. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the surface catalytic sites and OER mechanisms. Here, we report that catalytic single-site Co in a well-defined brookite TiO 2 nanorod (210) surface (Co-TiO 2 ) presents turnover frequencies that are among the highest for Co-based heterogeneous catalysts reported to date, reaching 6.6 ± 1.2 and 181.4 ± 28 s -1 at 300 and 400 mV overpotentials, respectively. Based on grand canonical quantum mechanics calculations and the single-site Co atomic structure validated by in situ and ex situ spectroscopic probes, we have established a full description of the catalytic reaction kinetics for Co-TiO 2 as a function of applied potential, revealing an adsorbate evolution mechanism for the OER. The computationally predicted Tafel slope and turnover frequencies exhibit exceedingly good agreement with experiment.

25 ENERGY STORAGE↗
DOE OSTI2022

Local cation order and ferrimagnetism in compositionally complex spinel ferrites

We present an exploration of a family of compositionally complex cubic spinel ferrites featuring combinations of Mg, Fe, Co, Ni, Cu, Mn, and Zn cations, systematically investigating the average and local atomic structures, chemical short-range order, magnetic spin configurations, and magnetic properties. All compositions result in ferrimagnetic average structures with extremely similar local bonding environments; however, the samples display varying degrees of cation inversion and, therefore, differing apparent bulk magnetization. Additionally, first-order reversal curve analysis of the magnetic reversal behavior indicates varying degrees of magnetic ordering and interactions, including potentially local frustration. Finally, reverse Monte Carlo modeling of the spin orientation demonstrates a relationship between the degree of cation inversion and the spin collinearity. Collectively, these observations correlate with differences in synthesis procedures. This work provides a framework for understanding magnetic behavior reported for “high-entropy spinels,” revealing many are likely compositionally complex oxides with differing degrees of chemical short-range order—not meeting the community established criteria for high or medium entropy compounds. Moreover, this work highlights the importance of reporting complete sample processing histories and investigating local to long-range atomic arrangements when evaluating potential entropic mixing effects and assumed property correlations in high entropy materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Single electron states in polyethylene

We report computer simulations of an excess electron in various structural motifs of polyethylene at room temperature, including lamellar and interfacial regions between amorphous and lamellae, as well as nanometre-sized voids. Electronic properties such as density of states, mobility edges, and mobilities are computed on the different phases using a block Lanczos algorithm. Our results suggest that the electronic density of states for a heterogeneous material can be approximated by summing the single phase density of states weighted by their corresponding volume fractions. Additionally, a quantitative connection between the localized states of the excess electron and the local atomic structure is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Effects of the molecule-electrode interface on the low-bias conductance of Cu–H{sub 2}–Cu single-molecule junctions

The atomic structure and electronic transport properties of a single hydrogen molecule connected to both symmetric and asymmetric Cu electrodes are investigated by using the non-equilibrium Green’s function formalism combined with the density functional theory. Our calculations show that in symmetric Cu–H{sub 2}–Cu junctions, the low-bias conductance drops rapidly upon stretching, while asymmetric ones present a low-bias conductance spanning the 0.2–0.3 G{sub 0} interval for a wide range of electrode separations. This is in good agreement with experiments on Cu atomic contacts in a hydrogen environment. Furthermore, the distribution of the calculated vibrational energies of the two hydrogen atoms in the asymmetric Cu–H{sub 2}–Cu junction is also consistent with experiments. These findings provide clear evidence for the formation of asymmetric Cu–H{sub 2}–Cu molecular junctions in breaking Cu atomic contacts in the presence of hydrogen and are also helpful for the design of molecular devices with Cu electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecular dynamics simulation of metallic Al–Ce liquids using a neural network machine learning interatomic potential

Al-rich Al-Ce alloys have the possibility of replacing heavier steel and cast-irons for use in high-temperature applications. Knowledge about the structures and properties of Al-Ce alloys at liquid state is vital for optimizing the manufacture process to produce desired allows. However, reliable molecular dynamics simulation of Al-Ce alloy systems remains a great challenge due to the lack of accurate Al-Ce interatomic potential. In this work, an artificial neural network (ANN) deep machine learning (ML) method is used to develop a reliable interatomic potential for Al-Ce alloy. Ab initio molecular dynamics (AIMD) simulation data on Al-Ce liquid with small unit cell (~200 atoms) and on the known Al-Ce crystalline compounds are collected to train the interatomic potential using ANN-ML. The obtained ANN-ML model reproduces well the energies, forces, and atomic structure of Al 90 Ce 10 liquid and crystalline phases of Al-Ce compounds in comparison with ab initio results. The developed ANN-ML potential is applied in molecular dynamics simulations to study the structures and properties of metallic Al 90 Ce 10 liquid, which would provide useful insight for guiding experimental process to produce desired Al-Ce allows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Memory-dictated dynamics of single-atom Pt on CeO2 for CO oxidation

Abstract Single atoms of platinum group metals on CeO 2 represent a potential approach to lower precious metal requirements for automobile exhaust treatment catalysts. Here we show the dynamic evolution of two types of single-atom Pt (Pt 1 ) on CeO 2 , i.e., adsorbed Pt 1 in Pt/CeO 2 and square planar Pt 1 in Pt AT CeO 2 , fabricated at 500 °C and by atom-trapping method at 800 °C, respectively. Adsorbed Pt 1 in Pt/CeO 2 is mobile with the in situ formation of few-atom Pt clusters during CO oxidation, contributing to high reactivity with near-zero reaction order in CO. In contrast, square planar Pt 1 in Pt AT CeO 2 is strongly anchored to the support during CO oxidation leading to relatively low reactivity with a positive reaction order in CO. Reduction of both Pt/CeO 2 and Pt AT CeO 2 in CO transforms Pt 1 to Pt nanoparticles. However, both catalysts retain the memory of their initial Pt 1 state after reoxidative treatments, which illustrates the importance of the initial single-atom structure in practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Modification of the structural and magnetic properties of granular FePt films by seed layer conditioning

The steadily increasing amount of digital information necessitates the availability of reliable high capacity magnetic data storage. Here, future hard disk drives with extended areal storage densities beyond 1.0 Tb/in{sup 2} are envisioned by using high anisotropy granular and chemically L1{sub 0}-ordered FePt (002) perpendicular media within a heat-assisted magnetic recording scheme. Perpendicular texturing of the [001] easy axes of the individual grains can be achieved by using MgO seed layers. It is therefore investigated, if and how an Ar{sup +} ion irradiation of the MgO seed layer prior to the deposition of the magnetic material influences the MgO surface properties and hereby the FePt [001] texture. Structural investigations reveal a flattening of the seed layer surface accompanied by a change in the morphology of the FePt grains. Moreover, the fraction of small second layer particles and the degree of coalescence of the primarily deposited FePt grains strongly increases. As for the magnetic performance, this results in a reduced coercivity along the magnetic easy axis (out of plane) and in enhanced hard axis (in-plane) remanence values. The irradiation induced changes in the magnetic properties of the granular FePt-C films are traced back to the accordingly modified atomic structure of the FePt-MgO interface region.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Determination of gaseous fission product behavior near the cerium dioxide Σ 3 (111)/[1 1 ¯ 0] tilt grain boundary via first-principles study

We present that grain boundaries (GBs) are the most abundant structural defects in nanostructured nuclear fuels and play an important role in determining fission product behavior, which further affects the performance of nuclear fuels. In this work, cerium dioxide (CeO 2 ) is used as a surrogate material for mixed oxide fuels to understand gaseous fission product behavior, specifically Xe. First-principles calculations are employed to comprehensively study the behavior of Xe and trap sites for Xe near the Σ 3 (111)/[1 1 ¯ 0] grain boundary in CeO 2 , which will provide guidance on overall trends for Xe stability and diffusion at grain boundaries vs in the bulk. Significant segregation behavior of trap sites, regardless of charge states, is observed near the GB. This is mainly ascribed to the local atomic structure near the GB, which results in weaker bond strength and more negative segregation energies. For Xe, however, the segregation profile near the GB is different. Our calculations show that, as the size of trap sites increases, the segregation propensity of Xe is reduced. In addition, under hyper-stoichiometric conditions, the solubility of Xe trapped at the GB is significantly higher than that in the bulk, suggesting higher Xe concentration than that in the bulk. The results of this work demonstrate that the diffusion mechanism of Xe in CeO 2 is comparable to that in UO 2 . The diffusion activation energies of Xe atoms in the Σ3GB are lower than that in the bulk CeO 2 . Lastly, these results suggest that the diffusivity of Xe atoms is higher along the GB than that in the bulk, which enhances the aggregation of Xe atoms near the GB.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reversible Oxidation Quantified by Optical Properties in Epitaxial Fe2CrO4+d Films on (001) MgAl2O4

We report on the structural and optical properties of Fe2CrO4+d epitaxial films grown by molecular beam epitaxy on MgAl2O4 (001) as a function of ?. The average Fe valence can be correlated with the out-of-plane lattice parameter and the extent of light absorption in the infrared spectral region. Over-oxidized films (0 < d < 0.5) exhibit reduced lattice parameters and suppressed infrared absorption. We discuss the behavior of a novel infrared transition at ~0.6 eV in stoichiometric Fe2CrO4 films deposited on MgAl2O4 (MAO) at or above 400 °C. This research provides new insight into the atomic structure, optical processes, oxidation states, electronic structure, and application potentials of Fe2CrO4+d.

ellipsometry, Epitaxy, thin film, oxidation, reduc↗
DOE OSTI2019

Structure‐based control of the rate limitation of photosynthetic electron transport

The 2.5 Å structure of the cytochrome (cyt) b 6 f complex provides a basis for control of the rate‐limiting electron transfer step of oxygenic photosynthesis associated with the plastoquinol/quinone exchange pathway. Here, a structural change was made at a site containing two proline residues which border the intra‐cyt pathway for plastoquinol/quinone exchange. The proline side chains confer a larger aperture for passage of plastoquinol/quinone. Change of these prolines to alanine in the cyanobacterium Synechococcus sp. PCC 7002 results in attenuation of this rate‐limiting step, observed by a two‐fold reduction in the rate of cell growth, O 2 evolution, and plastoquinol‐mediated reduction of cyt f . This study demonstrates modification by site‐directed mutagenesis of photosynthetic energy transduction based on rational application of information in the atomic structure.

Ness, Jillian↗
DOE OSTI2025

Resolving local structural motifs across the phase evolution of zinc titanates with computational x-ray absorption spectroscopy

Resolving the local structure motifs that characterize phase evolution as a function of composition is a key challenge in structure characterization of complex materials. Here, in this study, we combine first-principles simulations and x-ray absorption near-edge structures (XANES) analysis to gain insights into the structure evolution revealed by measurements across a combinatorial zinc titanate thin film, which was grown with smoothly varying composition over a wide range of the Ti:Zn ratio. Specifically, we propose a cluster blind-signal-separation (cBSS) method for XANES spectral analysis based on a library of the structures and spectra of representative local motifs. In addition to motifs from zinc titanate crystals, two types of Ti-defect models constructed in this study are key to the understanding of the structure characteristics in the Zn-rich region. The cBSS method makes use of both spectral clustering of the simulated site-XANES spectra library and the BSS procedure to construct high-fidelity spectral basis functions from an experimental spectral sequence. The method provides a rigorous measure of the spectral sensitivity and basis completeness. The results of the XANES analysis are corroborated with other experimental modalities, including x-ray diffraction and spectroscopic ellipsometry, to validate the cBSS method. The calculated motif weights resulting from fitting the XANES spectra with the cBSS basis probe the atomic structure characteristics of both crystalline and amorphous phases as a function of the Ti/Zn composition. The insights of the local structure motif evolution are pivotal to the understanding of the nonmonotonic trend in the optical gap, which may lead to potential applications through tuning the optical properties of zinc titanate. The workflow of the XANES spectral analysis developed in this work can be generalized to construct the structure-property relationship in a broad material space.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Radiative rates for E1, E2, M1, and M2 transitions in Ne-like Hf LXIII, Ta LXIV and Re LXVI

Calculations for energy levels, radiative rates and lifetimes have been performed for three Ne-like ions, namely Hf LXIII, Ta LXIV and Re LXVI, for which the general-purpose relativistic atomic structure package (GRASP) has been adopted. Results are presented among the lowest 121 levels of these ions, which belong to the 2s{sup 2}2p{sup 6}, 2s{sup 2}2p{sup 5}3ℓ, 2s2p{sup 6}3ℓ, 2s{sup 2}2p{sup 5}4ℓ, 2s2p{sup 6}4ℓ, and 2s{sup 2}2p{sup 5}5ℓ configurations, but CI (configuration interaction) has been considered among a much larger number of levels. No measurements for energy levels are available but comparisons have been made with the earlier similar theoretical results. Additionally, calculations have also been performed with the flexible atomic code (FAC) in order to assess the effect of (much) larger CI on energy levels.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Dynamic Interconversion of Metal Active Site Ensembles in Zeolite Catalysis

Catalysis science is founded on understanding the structure, number, and reactivity of active sites. Kinetic models that consider active sites to be static and noninteracting entities are routinely successful in describing the behavior of heterogeneous catalysts. Yet, active site ensembles often restructure in response to their external environment and even during steady-state catalytic turnover, sometimes requiring non-mean-field kinetic treatments to describe distance-dependent interactions among sites. Such behavior is being recognized more frequently in modern catalysis research, with the advent of experimental methods to quantify turnover rates with increasing precision, an expanding arsenal of operando characterization tools, and computational descriptions of atomic structure and motion at chemical potentials and timescales increasingly relevant to reaction conditions. This review focuses on dynamic changes to metal active site ensembles on zeolite supports, which are silica-based crystalline materials substituted with Al that generate binding sites for isolated and low-nuclearity metal site ensembles. Metal sites can become solvated and mobilized during reaction, facilitating interactions among sites that change their nuclearity and function. Such intersite communication can be regulated by the zeolite support, resulting in non-single-site and potentially non-mean-field kinetic behavior arising from mechanisms of catalytic action that combine elements of those canonically associated with homogeneous and heterogeneous catalysis. Here, we discuss recent literature examples that document dynamic active site behavior in metal-zeolites and outline methodologies to identify and interpret such behavior. We conclude with our outlook on future research directions to develop this evolving branch of catalysis science and harness it for practical applications.

operando characterization↗
DOE OSTI2012

The electronic and optical properties of warm dense nitrous oxide using quantum molecular dynamics simulations

First-principles molecular-dynamics simulations based on density-functional theory have been used to study the electronic and optical properties of fluid nitrous oxide under extreme conditions. Systematic descriptions of pair-correlation function, atomic structure, and the charge density distribution are used to investigate the dissociation of fluid nitrous oxide. The electrical and optical properties are derived from the Kubo-Greenwood formula. It is found that the nonmetal-metal transition for fluid nitrous oxide can be directly associated to the dissociation and has significant influence on the optical properties of the fluid.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Surface structure of bulk 2H-MoS 2 (0001) and exfoliated suspended monolayer MoS 2 : A selected area low energy electron diffraction study

Here, we used selected area low energy electron diffraction intensity-voltage (μLEED-IV) analysis to investigate the surface structure of crystalline 2H molybdenum disulfide (MoS 2 ) and mechanically exfoliated and suspended monolayer MoS 2 . Our results show that the surface structure of bulk 2H-MoS 2 is distinct from its bulk and that it has a slightly smaller surface relaxation at 320 K than previously reported at 95 K. We concluded that suspended monolayer MoS 2 shows a large interlayer relaxation compared to the MoS 2 sandwich layer terminating the bulk surface. The Debye temperature of MoS 2 was concluded to be about 600 K, which agrees with a previous theoretical study. Our work has shown that the dynamical μLEED-IV analysis performed with a low energy electron microscope (LEEM) is a powerful technique for determination of the local atomic structures of currently extensively studied two-dimensional (2-D) materials.

2-D material↗
DOE OSTI2014

Ab initio density functional theory study of non-polar (101{sup ¯}0), (112{sup ¯}0) and semipolar (202{sup ¯}1) GaN surfaces

The atomic structures of non-polar GaN(101{sup ¯}0), (112{sup ¯}0) and semipolar GaN(202{sup ¯}1), (202{sup ¯}1{sup ¯}) surfaces were studied using ab initio calculations within density functional theory. The bulk-like truncated (1 × 1) structure with buckled Ga-N or Ga-Ga dimers was found stable on the non-polar GaN(101{sup ¯}0) surface in agreement with previous works. Ga-N heterodimers were found energetically stable on the GaN(112{sup ¯}0)-(1 × 1) surface. The formation of vacancies and substitution site defects was found unfavorable for non-polar GaN surfaces. Semipolar GaN(202{sup ¯}1)-(1 × 1) surface unit cells consist of non-polar (101{sup ¯}0) and semipolar (101{sup ¯}1) nano-facets. The (101{sup ¯}1) nano-facets consist of two-fold coordinated atoms, which form N-N dimers within a (2 × 1) surface unit cell on a GaN(202{sup ¯}1) surface. Dimers are not formed on the GaN(202{sup ¯}1{sup ¯}) surface. The stability of the surfaces with single (101{sup ¯}0) or (101{sup ¯}1) nano-facets was analyzed. A single non-polar (101{sup ¯}0)-(1 × 1) nano-facet was found stable on the GaN(202{sup ¯}1) surface, but unstable on the GaN(202{sup ¯}1{sup ¯}) surface. A single (101{sup ¯}1) nano-facet was found unstable. Semipolar GaN surfaces with (202{sup ¯}1) and (202{sup ¯}1{sup ¯}) polarity can be stabilized with a Ga overlayer at Ga-rich experimental conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Mechanical properties of structural amorphous steels: Intrinsic correlations, conflicts, and optimizing strategies

Amorphous steels have demonstrated superior properties and great potentials for structural applications since their emergence, yet it still remains unclear about how and why their mechanical properties are correlated with other factors and how to achieve intended properties by designing their compositions. Here, the intrinsic interdependences among the mechanical, thermal, and elastic properties of various amorphous steels are systematically elucidated and a general trade-off relation is exposed between the strength and ductility/toughness. Encouragingly, a breakthrough is achievable that the strength and ductility/toughness can be simultaneously improved by tuning the compositions. The composition dependences of the properties and alloying effects are further analyzed thoroughly and interpreted from the fundamental plastic flow and atomic bonding characters. Most importantly, systematic strategies are outlined for optimizing the mechanical properties of the amorphous steels. The study may help establish the intrinsic correlations among the compositions, atomic structures, and properties of the amorphous steels, and provide useful guidance for their alloy design and property optimization. Thus, it is believed to have implications for the development and applications of the structural amorphous steels.

36 MATERIALS SCIENCE↗