Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Cyclic structural analyses of air-cooled gas turbine blades and vanes

The creep-fatigue behavior of a fully impingement-cooled blade for four cyclic cases was analyzed by using the Elas 55, finite-element, nonlinear structural computer program. Expected cyclic lives were calculated by using the method of Strainrange Partitioning for reversed inelastic strains and time fractions for ratcheted tensile creep strains. Strainrange Partitioning was also applied to previous results from a one-dimensional cyclic analysis of a film-impingement-cooled vane. The analyses indicated that Strainrange Partitioning is more applicable to a constrained airfoil such as the film-impingement-cooled vane than to the relatively unconstrained fully impingement-cooled airfoil.

Kaufman, A.↗

A finite element technique for non-deterministic thermal deformation analyses including temperature dependent material properties

A technique utilizing the finite element displacement method is developed for the static analysis of structures subjected to non-deterministic thermal loading in which the material properties, assumed isotropic, are temperature dependent. Matrix equations are developed for the first two statistical moments of the displacements using a third order series expansion for the displacements in terms of the random temperatures. Sample problems are included to demonstrate the range of applicability of the third order series solutions. These solutions are compared with results from Monte Carlo analyses and also, for some problems, with solutions obtained by numerically integrating equations for the statistical properties of the displacements. In general, it is shown that the effect of temperature dependent material properties can have a significant effect on the covariances of the displacements.

Case, W. R., Jr.↗

Analyses of the cloud contents of multispectral imagery from LANDSAT 2: Mesoscale assessments of cloud and rainfall over the British Isles

The author has identified the following significant results. It was demonstrated that satellites with sufficiently high resolution capability in the visible region of the electromagnetic spectrum could be used to check the accuracy of estimates of total cloud amount assessed subjectively from the ground, and to reveal areas of performance in which corrections should be made. It was also demonstrated that, in middle latitude in summer, cloud shadow may obscure at least half as much again of the land surface covered by an individual LANDSAT frame as the cloud itself. That proportion would increase with latitude and/or time of year towards the winter solstice. Analyses of sample multispectral images for six different categories of clouds in summer revealed marked differences between the reflectance characteristics of cloud fields in the visible/near infrared region of the spectrum.

Barrett, E. C.↗

Size and modal analyses of fines and ultrafines from some Apollo 17 samples

Scanning electron and optical microscopy techniques have been used to determine the grain-size frequency distributions and morphology-based modal analyses of fine and ultrafine fractions of some Apollo 17 regolith samples. There are significant and large differences between the grain-size frequency distributions of the less than 10-micron size fraction of Apollo 17 samples, but there are no clear relations to the local geologic setting from which individual samples have been collected. This may be due to effective lateral mixing of regolith particles in this size range by micrometeoroid impacts. None of the properties of the frequency distributions support the idea of selective transport of any fine grain-size fraction, as has been proposed by other workers. All of the particle types found in the coarser size fractions also occur in the less than 10-micron particles. In the size range from 105 to 10 microns there is a strong tendency for the percentage of regularly shaped glass to increase as the graphic mean grain size of the less than 1-mm size fraction decreases, both probably being controlled by exposure age.

Greene, G. M.↗

Thermal-structural mission analyses of air-cooled gas turbine blades

Cyclic temperature and stress-strain states in cooled turbine blades were calculated for a simulated mission of an advanced technology aircraft engine. TACT1 (three dimensional heat transfer) and MARC (nonlinear structural analysis) computer programs were used to analyze impingement cooled airfoils, with and without leading-edge film cooling. Creep was the predominant damage mode, particularly around film cooling holes. Radially angled holes exhibited less creep than holes normal to surface. Beam-type analyses of all-impingement cooled airfoils gave fair agreement with MARC results for initial creep.

Kaufman, A.↗

On the equivalence between semiempirical fracture analyses and R-curves

The relationship between several semiempirical fracture analyses (SEFA) and the R-curve concept of fracture mechanics is examined. The conditions for equivalence between a SEFA and an R-curve are derived. A hypothetical material is employed to study the relationship analytically. Equivalent R-curves are developed for real materials using data from the literature. For each SEFA there is an equivalent R-curve whose magnitude and shape are determined by the SEFA formulation and its empirical parameters. If the R-curve is indeed unique then the various empirical parameters cannot be constant, and vice versa. However, for one SEFA the differences are small enough that they may be within the range of normal data scatter for real materials.

Orange, T. W.↗

Phase 1 of the First Small Power System Experiment (engineering Experiment No. 1). Volume 5: Supporting Analyses and Trade Studies

The development and design of a modular solar thermal power system for application in the 1 to 10 MWe range is described. The system is used in remote utility applications, small communities, rural areas, and for industrial uses. Thermal and stress analyses are performed on the collector subsystem, energy storage subsystem, energy transport subsystem, the power conversion subsystem, and the plant control subsystem.

Holl, R. J.↗

Capabilities and applications of a computer program system for dynamic loads analyses of flexible airplanes with active controls /DYLOFLEX/

This paper describes and illustrates the capabilities of the DYLOFLEX Computer Program System. DYLOFLEX is an integrated system of computer programs for calculating dynamic loads of flexible airplanes with active control systems. A brief discussion of the engineering formulation for each of the nine DYLOFLEX programs is described. The capabilities of the system are illustrated by the analyses of two example configurations.

Perry, B., III↗

Thermal-structural mission analyses of air-cooled gas turbine blades

Cyclic temperature and stress-strain states in cooled turbine blades were calculated for a simulated mission of an advanced technology aircraft engine. TACTl (three dimensional heat transfer) and MARC (nonlinear structural analysis) computer programs were used to analyze impingement cooled airfoils, with and without leading-edge film cooling. Creep was the predominant damage mode, particularly around film cooling holes. Radially angled holes exhibited less creep than holes normal to surface. Beam-type analyses of all-impingement cooled airfoils gave fair agreement with MARC results for initial creep.

Kaufman, A.↗

Tissue gas and blood analyses of human subjects breathing 80% argon and 20% oxygen

Eight human volunteers, individually studied in a hyperbaric chamber, breathed: (1) air at 1 ATA; (2) 80% argon and 20% oxygen at 1 ATA for 30 min; (3) air at 1 ATA for 30 min; (4) 100% O2 at 1 ATA for 30 min; (5) air at 1 ATA for 30 min; (6) 100% O2 at 2 ATA for 60 min; and (7) 80% argon and 20% oxygen at 1 ATA for 30 min. Oxygen, carbon dioxide, nitrogen, and argon tensions were measured in muscle and subcutaneous tissue by mass spectroscopic analyses. Venous blood obtained at regular intervals was analyzed for coagulation and fibrinolytic factors. Inert gas narcosis was not observed. After breathing argon for 30 min, muscle argon tensions were almost three times the subcutaneous tensions. Argon wash-in mirrored nitrogen wash-out. Argon wash-in and wash-out had no effect on tissue PO2 or PCO2. Coagulation and fibrinolytic changes usually associated with vascular bubbles were absent.

Horrigan, D. J.↗

Flow-field analyses for future planetary entry

Scientific exploration of the planets by means of instrumented probes and landers provides a means of enhancing our knowledge concerning the solar system. A prime requirement for a successful planetary entry mission is that the design of a vehicle be based on a reliable definition of the aerothermal environment encountered during entry. This paper briefly reviews some of the past developments and current examples of computational flow-field analyses for predicting the aerothermal environment of planetary probes. All of the flow-field solutions presented are for a very severe aerothermal entry environment, representative of the entry environment that the Galileo probe will encounter when it enters Jupiter's atmosphere in 1985. Finally, areas for analysis improvements and extensions are identified for current and future planetary missions.

Moss, J. N.↗

On the equivalence between semiempirical fracture analyses and R-curves

The relationships between several semiempirical fracture analyses (Brockrath and Glassco, 1974; Newman, 1973; Kuhn, 1968; Orange, 1971; Feddersen, 1971) and the R-curve concept of fracture mechanics are examined. Some characteristics of the R-curve concept when applied to finite-width specimens are reviewed, and conditions for equivalence between a semiempirical analysis (SEFA) and an R-curve are derived. The relationship between R-curves and SEFAs is studied for a hypothetical material. It is shown that for each SEFA there is an equivalent R-curve, the magnitude and shape of which are determined by the SEFA formulation and parameters, and which predicts precisely the same relationship between fracture stress and original crack length. A given SEFA correlates residual strength data closely if its equivalent R-curve closely matches the actual R-curve of the material studied. The SEFA given by Newman is found to yield best results for the hypothetical case considered. Equivalent R-curves for real materials are developed using data from the literature.

Orange, T. W.↗

Unsteady flow and dynamic response analyses for helicopter rotor blades

Research is presented on helicopter rotor blade vibration and on two and three dimensional analyses of unsteady incompressible viscous flow past oscillating helicopter rotor blades. A summary is presented of the two international research collaborations which resulted from the NASA project: the collaboration under the auspices of NATO between the University of Wisconsin-Milwaukee, University of Brussels, Belgium and the Aerodynamics Research Establishment in Goettingen, West Germany, and the collaboration under the auspices of the National Science Foundation between UWM and the University of Hamburg and the Ship Research Establishment in Hamburg, West Germany. A summary is given of the benefits from the NASA project to UWM, the College of Engineering and Applied Science, and the participants on the project.

Bratanow, T.↗

Analyses and tests of the B-1 aircraft structural mode control system

Analyses and flight tests of the B-1 structural mode control system (SMCS) are presented. Improvements in the total dynamic response of a flexible aircraft and the benefits to ride qualities, handling qualities, crew efficiency, and reduced dynamic loads on the primary structures, were investigated. The effectiveness and the performance of the SMCS, which uses small aerodynamic surfaces at the vehicle nose to provide damping to the structural modes, were evaluated.

Wykes, J. H.↗

A relation between semiempirical fracture analyses and R-curves

The relations between several semiempirical fracture analyses (SEFA) and the R-curve concept of fracture mechanics are examined and the conditions for equivalence between a SEFA and an R-curve are derived. A hypothetical material is employed to study the relation analytically. Equivalent R-curves are developed for several real materials using data from the literature. For each SEFA there is an equivalent R-curve whose magnitude and shape are determined by the SEFA formulation and its empirical parameters. If the R-curve is indeed unique, then the various empirical parameters cannot be constant, and vice versa. However, for one SEFA the differences are small enough that they may be within the range of normal data scatter for real materials.

Orange, T. W.↗

Atmospheric effects on cluster analyses

Ground reflected radiance, from which information is extracted through techniques of cluster analyses for remote sensing application, is altered by the atmosphere when it reaches the satellite. Therefore it is essential to understand the effects of the atmosphere on Landsat measurements, cluster characteristics and analysis accuracy. A doubling model is employed to compute the effective reflectivity, observed from the satellite, as a function of ground reflectivity, solar zenith angle and aerosol optical thickness for standard atmosphere. The relation between the effective reflectivity and ground reflectivity is approximately linear. It is shown that for a horizontally homogeneous atmosphere, the classification statistics from a maximum likelihood classifier remains unchanged under these transforms. If inhomogeneity is present, the divergence between clusters is reduced, and correlation between spectral bands increases. Radiance reflected by the background area surrounding the target may also reach the satellite. The influence of background reflectivity on effective reflectivity is discussed.

Kiang, R. K.↗

A new look at numerical analyses of free-edge stresses in composite laminates

The edge stress problem for a + or - 45 deg graphite/epoxy laminate was examined. The reliability of the displacement formulated finite element method in analyzing the edge stress problem was investigated. Analyses of two well known elasticity problems, one involving a stress discontinuity and one a singularity, showed that the finite element analysis yields accurate stress distributions everywhere except in two elements closest to the stress discontinuity of singularity. Stress distributions for a + or - 45 deg laminate showed the same behavior near the singularity found in the well known problems with exact solutions. The displacement formulated finite element method appears to be a highly accurate technique for calculating interlaminar stress in composite laminates. The disagreement among the numerical methods was attributed to the unsymmetric stress tensor at the singularity.

Raju, I. S.↗

Ozone contamination in aircraft cabins: Results from GASP data and analyses

The global atmospheric sampling program pertaining to the problem of ozone contamination in commercial airplane cabins is described. Specifically, analyses of GASP data have: confirmed the occurrence of high ozone levels in aircraft cabins and documented the ratio of ozone inside and outside the cabins of two B747 airliners, including the effects of air conditioning modifications on that ratio; defined ambient ozone climatology at commercial airplane cruise altitudes, including tabulation of encounter frequency data which were not available before GASP; and outlined procedures for estimating the frequency of flights encountering high cabin ozone levels using climatological ambient ozone data, and verified these procedures against cabin measurements.

Holdeman, J. D.↗