Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerator physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Annular MHD Physics for Turbojet Energy Bypass

The use of annular Hall type MHD generator/accelerator ducts for turbojet energy bypass is evaluated assuming weakly ionized flows obtained from pulsed nanosecond discharges. The equations for a 1-D, axisymmetric MHD generator/accelerator are derived and numerically integrated to determine the generator/accelerator performance characteristics. The concept offers a shockless means of interacting with high speed inlet flows and potentially offers variable inlet geometry performance without the complexity of moving parts simply by varying the generator loading parameter. The cycle analysis conducted iteratively with a spike inlet and turbojet flying at M = 7 at 30 km altitude is estimated to have a positive thrust per unit mass flow of 185 N-s/kg. The turbojet allowable combustor temperature is set at an aggressive 2200 deg K. The annular MHD Hall generator/accelerator is L = 3 m in length with a B(sub r) = 5 Tesla magnetic field and a conductivity of sigma = 5 mho/m for the generator and sigma= 1.0 mho/m for the accelerator. The calculated isentropic efficiency for the generator is eta(sub sg) = 84 percent at an enthalpy extraction ratio, eta(sub Ng) = 0.63. The calculated isentropic efficiency for the accelerator is eta(sub sa) = 81 percent at an enthalpy addition ratio, eta(sub Na) = 0.62. An assessment of the ionization fraction necessary to achieve a conductivity of sigma = 1.0 mho/m is n(sub e)/n = 1.90 X 10(exp -6), and for sigma = 5.0 mho/m is n(sub e)/n = 9.52 X 10(exp -6).

Schneider, Steven J.↗
NASA NTRS1999

Neutron yields from 155 MeV/nucleon carbon and helium stopping in aluminum

Neutron fluences have been measured from 155 MeV/nucleon 4He and 12C ions stopping in an Al target at laboratory angles between 10 and 160 deg. The resultant spectra were integrated over angle and energy above 10 MeV to produce total neutron yields. Comparison of the two systems shows that approximately two times as many neutrons are produced from 155 MeV/nucleon 4He stopping in Al and 155 MeV/nucleon 12C stopping in Al. Using an energy-dependent geometric cross-section formula to calculate the expected number of primary nuclear interactions shows that the 12C + Al system has, within uncertainties, the same number of neutrons per interaction (0.99 +/- 0.03) as does the 4He + Al system (1.02 +/- 0.04), despite the fact that 12C has three times as many neutrons as does 4He. Energy and angular distributions for both systems are also reported. No major differences can be seen between the two systems in those distributions, except for the overall magnitude. Where possible, the 4He + Al spectra are compared with previously measured spectra from 160 and 177.5 MeV/nucleon 4He interactions in a variety of stopping targets. The reported spectra are consistent with previously measured spectra. The data were acquired to provide data applicable to problems dealing with the determination of the radiation risk to humans engaged in long-term missions in space; however, the data are also of interest for issues related to the determination of the radiation environment in high-altitude flight, with shielding at high-energy heavy-ion accelerators and with doses delivered outside tumor sites treated with high-energy hadronic beams.

NASA Discipline Radiation Health↗
NASA NTRS1990

Supernovae and supernova remnants at high energies

The physical phenomena that are observable with X- and gamma-ray observations of supernovae are discussed with respect to possible high-energy astrophysics experiments. Prompt photospheric emission and its echo are discussed, supernova radioactivity and neutron star effects are examined, and circumstellar and interstellar interaction are reviewed. The primary uncertainties are found to be the hardening of the spectrum by non-LTE effects and the amount of absorption of the radiation from the initial soft X-ray burst. The radioactivity in supernovae is theorized to lead to gamma-ray lines and continuum emission unless the event is low-mass type II. Gamma-ray observations are proposed to examine the efficiency of particle acceleration, and high-resolution spectroscopy can provide data regarding ionization, temperature, composition, and velocities of the X-ray-emitting gas.

Chevalier, Roger A.↗
NASA NTRS2010

Recent Developments in the Radiation Belt Environment Model

The fluxes of energetic particles in the radiation belts are found to be strongly controlled by the solar wind conditions. In order to understand and predict the radiation particle intensities, we have developed a physics-based Radiation Belt Environment (RBE) model that considers the influences from the solar wind, ring current and plasmasphere. Recently, an improved calculation of wave-particle interactions has been incorporated. In particular, the model now includes cross diffusion in energy and pitch-angle. We find that the exclusion of cross diffusion could cause significant overestimation of electron flux enhancement during storm recovery. The RBE model is also connected to MHD fields so that the response of the radiation belts to fast variations in the global magnetosphere can be studied.Weare able to reproduce the rapid flux increase during a substorm dipolarization on 4 September 2008. The timing is much shorter than the time scale of wave associated acceleration.

Fok, M.-C.↗
NASA NTRS2005

Nanoactuators Based on Electrostatic Forces on Dielectrics

Nanoactuators of a proposed type would exploit the forces exerted by electric fields on dielectric materials. As used here, "nanoactuators" includes motors, manipulators, and other active mechanisms that have dimensions of the order of nanometers and/or are designed to manipulate objects that have dimensions of the order of nanometers. The underlying physical principle can be described most simply in terms of the example of a square parallel-plate capacitor in which a square dielectric plate is inserted part way into the gap between the electrode plates (see Figure Typically, the force is small from our macroscopic human perspective. The above equation shows that the force depends on the ratio between the capacitor dimensions but does not depend on the size. In other words, the force remains the same if the capacitor and the dielectric slab are shrunk to nanometer dimensions. At the same time, the masses of all components are proportional to third power of their linear dimensions. Therefore the force-to-mass ratio (and, consequently, the acceleration that can be imparted to the dielectric slab) is much larger at the nanoscale than at the macroscopic scale. The proposed actuators would exploit this effect. The upper part of Figure 2 depicts a simple linear actuator based on a parallel- plate capacitor similar to Figure 1. In this case, the upper electrode plate would be split into two parts (A and B) and the dielectric slab would be slightly longer than plate A or B. The actuator would be operated in a cycle. During the first half cycle, plate B would be grounded to the lower plate and plate A would be charged to a potential, V, with respect to the lower plate, causing the dielectric slab to be pulled under plate A. During the second half cycle, plate A would be grounded and plate B would be charged to potential V, causing the dielectric slab to be pulled under plate B. The back-and-forth motion caused by alternation of the voltages on plates A and B could be used to drive a nanopump, for example. A rotary motor, shown in the middle part of Figure 2, could include a dielectric rotor sandwiched between a top and a bottom plate containing multiple electrodes arranged symmetrically in a circle. Voltages would be applied sequentially to electrode pairs 1 and 1a, then 2 and 2a, then 3 and 3a in order to attract the dielectric rotor to sequential positions between the electrode pairs.

Wang, Yu↗
NASA NTRS1995

Progress towards computer simulation of NiH2 battery performance over life

The long-term performance of rechargeable battery cells has traditionally been verified through life-testing, a procedure that generally requires significant commitments of funding and test resources. In the situation of nickel hydrogen battery cells, which have the capability of providing extremely long cycle life, the time and cost required to conduct even accelerated testing has become a serious impediment to transitioning technology improvements into spacecraft applications. The utilization of computer simulations to indicate the changes in performance to be expected in response to design or operating changes in nickel hydrogen cells is therefore a particularly attractive tool in advanced battery development, as well as for verifying performance in different applications. Computer-based simulations of the long-term performance of rechargeable battery cells have typically had very limited success in the past. There are a number of reasons for the lack in progress in this area. First, and probably most important, all battery cells are relatively complex electrochemical systems, in which performance is dictated by a large number of interacting physical and chemical processes. While the complexity alone is a significant part of the problem, in many instances the fundamental chemical and physical processes underlying long-term degradation and its effects on performance have not even been understood. Second, while specific chemical and physical changes within cell components have been associated with degradation, there has been no generalized simulation architecture that enables the chemical and physical structure (and changes therein) to be translated into cell performance. For the nickel hydrogen battery cell, our knowledge of the underlying reactions that control the performance of this cell has progressed to where it clearly is possible to model them. The recent development of a relative generalized cell modelling approach provides the framework for translating the chemical and physical structure of the components inside a cell into its performance characteristics over its entire cycle life. This report describes our approach to this task in terms of defining those processes deemed critical in controlling performance over life, and the model architecture required to translate the fundamental cell processes into performance profiles.

Zimmerman, Albert H.↗
NASA NTRS2012

Physiological Based Simulator Fidelity Design Guidance

The evolution of the role of flight simulation has reinforced assumptions in aviation that the degree of realism in a simulation system directly correlates to the training benefit, i.e., more fidelity is always better. The construct of fidelity has several dimensions, including physical fidelity, functional fidelity, and cognitive fidelity. Interaction of different fidelity dimensions has an impact on trainee immersion, presence, and transfer of training. This paper discusses research results of a recent study that investigated if physiological-based methods could be used to determine the required level of simulator fidelity. Pilots performed a relatively complex flight task consisting of mission task elements of various levels of difficulty in a fixed base flight simulator and a real fighter jet trainer aircraft. Flight runs were performed using one forward visual channel of 40 deg. field of view for the lowest level of fidelity, 120 deg. field of view for the middle level of fidelity, and unrestricted field of view and full dynamic acceleration in the real airplane. Neuro-cognitive and physiological measures were collected under these conditions using the Cognitive Avionics Tool Set (CATS) and nonlinear closed form models for workload prediction were generated based on these data for the various mission task elements. One finding of the work described herein is that simple heart rate is a relatively good predictor of cognitive workload, even for short tasks with dynamic changes in cognitive loading. Additionally, we found that models that used a wide range of physiological and neuro-cognitive measures can further boost the accuracy of the workload prediction.

Schnell, Thomas↗
NASA NTRS2017

Fermi Gamma-Ray Pulsars: Understanding the High-Energy Emission from Dissipative Magnetospheres

Based on the Fermi observational data, we reveal meaningful constraints for the dependence of the macroscopic conductivity (sigma) of dissipative pulsar magnetosphere models on the corresponding spin-down rate, epsilon(sup dot). Our models are refinements of the FIDO (Force-free Inside, Dissipative Outside) models, which have dissipative regions that are restricted on the equatorial current sheet outside of the the light-cylinder. Taking into account the observed cutoff energies of all of the Fermi pulsars and assuming that (a) the corresponding gamma-ray pulsed emission is due to curvature radiation at the radiation-reaction-limit regime, and (b) this emission is produced at the equatorial current sheet near the light cylinder, we show that the Fermi data provide clear indications about the corresponding accelerating electric-field components. A direct comparison between the Fermi cutoff energies and the model ones reveals that if sigma increases with epsilon(sup dot) for high epsilon(sup dot)-values, while it saturates for low ones. This comparison indicates also that the corresponding gap width increases toward low epsilon(sup dot)-values. Assuming the Goldreich-Julian flux for the emitting particles, we calculate the total gamma-ray luminosity (L(sub gamma)). A comparison between the dependence of the Fermi L(sub gamma)-values and the model ones on epsilon(sup dot) indicates an increase of the emitting particle multiplicity with epsilon(sup dot). Our modeling, guided by the Fermi data alone, enhances our understanding of the physical mechanisms behind the high-energy emission in pulsar magnetospheres.

Kalapotharakos, Constantinos↗
NASA NTRS1993

Sources of Na for the Io atmosphere

The physics and geology of Io have been extensively studied, but there has been little discussion of the chemistry. Relatively little is known about Io chemistry, but there are constraints. Further, it will be a long time before improvements will result from direct observation, given the severe difficulties with the Galileo mission. Via laboratory simulation experiments, plausible thermochemical and photochemical processes which determine the nature and amounts of surface constituents of Io are explored. The well-known density of Io shows that the planet overall is rocky. Because the orbit of Io is well within the magnetosphere of Jupiter and because Io only has a thin, transient SO2 atmosphere, the surface is continually sputtered with magnetospheric ions. Complex processes ionize and accelerate the Io surface atoms to keV and MeV energies. Remarkably, only S, O, and Na ions were found by Voyager. Sputtering also produces an atomic cloud of Na and S (O not observable) with a trace of K. Both gaseous and solid SO2 are known from spectroscopic studies. A trace of H2S and possibly CO2 are present. Geologic features are interpreted in terms of elemental S, but there is no direct evidence for this constituent. We thus have a rocky planet which does not have rocks on the surface. Our general goal is to understand the cycling of Na, S, and O through the crust and atmosphere on present-day Io and to understand how Io evolved to this state. A specific objective was to determine the phases on the surface which are the source of the Na in the atmosphere of Io.

Burnett, D. S.↗
NASA NTRS1996

Grazing-Activated Production of Dimethyl Sulfide (DMS) by two clones of Emiliania huxleyi

Emiliania huxleyi clones CCMP 370 and CCMP 373 produced similar amounts of dimethylsulfoniopropionate (DMSP) during axenic exponential growth, averaging 109 mM internal DMSP. Both clones had detectable DMSP lyase activity, as measured by production of dimethyl sulfide (DMS) during in vitro assays of crude cell preparations, but activities and conditions differed considerably between clones. Clone 373 had high activity; clone 370 had low activity and required chloride. For both strains, enzyme activity per cell was constant during exponential growth, but little DMS was produced by healthy cells. Rather, DMS production was activated when cells were subjected to physical or chemical stresses that caused cell lysis. We propose that DMSP lyase and DMSP are segregated within these cells and re-action only under conditions that result in cell stress or damage. Such activation occurs during microzooplankton grazing. When these clones were grazed by the dinoflagellate Oxyrrhis marina, DMS was produced; ungrazed cells, as well as those exposed to grazer exudates and associated bacteria, generated no DMS. Grazing of clone 373 produced much more DMS than grazing of clone 370, consistent with their relative in vitro DMSP lyase activities. DMS was only generated when cells were actually being grazed, indicating that ingested cells were responsible for the DMS formation. We suggest that even low levels of grazing can greatly accelerate DMS production.

Wolfe, Gordon V.↗
NASA NTRS1984

Numerical Modeling of the Atmosphere

Numerical models and numerical analyses of observations were used to improve the understanding of the physical processes important in global weather and climate. Results from a study of the effect of baroclinic waves on mid-latitude vertical temperature structure show that the waves' vertical eddy heat flux tend to eliminate the potential vorticity gradient near the steering level by causing the static stability to decrease rapidly with height in the lower troposphere above the boundary layer. An empirical study of the relationship between eddy heat fluxes and the meridional temperature gradient has been completed. The results indicate that the feedback in the flux-gradient system is comparable to dissipation on all time scales between the synoptic and the seasonal. The definition of the Eliassen-Palm flux and the Eliassen-Palm and non-acceleration theorems has been generalized to include eddy forcing of condensation. Calculations based on the generalized diagnostics showed that the annual mean eddy forcing of the zonal mean zonal wind is two and one half times stronger when the condensation effects are included.

Stone, P. H.↗
NASA NTRS1995

Sensitivity analysis in multipole-accelerated panel methods for potential flow

In the design of an airframe, the effect of changing the geometry on resulting computations is necessary for design optimization. The geometry is defined in terms of a series of design variables, including design variables to define the wing planform, tail, canard, pylon, and nacelle. Design optimization in this research is based on how these design variable affect the potential flow. The potential flow is computed as a function of the geometry and location of a series of panels describing the airframe, which are in turn a function of the design variables. Multipole accelerated panel methods improve the computational complexity of the problem and thus are an attractive approach. To utilize the methods in design optimization, it was necessary to define the appropriate sensitivity derivatives. The overhead incurred from finding the sensitivity derivatives in conjunction with the original computation should be small. This research developed the background for multipole-accelerated panel methods and the framework for finding sensitivity derivatives in the methods. Potential flow panel codes are commonly used for powered-lift aerodynamic predictions for three dimensional geometries. Given an airframe which has been discretized into a series of panels to define the airframe geometry, potential is computed as a function of the influence of all panels on all other panels. This is a computationally intensive problem for which efficient solutions are desired to improve the computational time and to allow greater resolution by use of more panels. One such solution is the use of hierarchical multipole methods which entail approximations of the effects of far-field terms. Hierarchical multipole methods have become prevalent in molecular dynamics and gravitational physics, and have been introduced into the fields of capacitance calculations, computational fluid dynamics, and electromagnetics. The methods utilize multipole expansions to describe the effect of bodies (i.e. particles, astrophysical bodies, panels, etc.) within a sphere on points distant from the sphere, where the influence diminishes as a function of distance. The expansions are exact with infinite series, however, for practical computations, the series are truncated and accuracy is selected based on the number of terms retained in the expansions. A hierarchical tree structure groups bodies together based on proximity to allow definition of multipole expansions for each group. The multipole expansions are then used to compute the effect of the bodies in a group on distant bodies.

Leathrum, James F., Jr.↗
NASA NTRS2012

PheniX: A New Vision for the Hard X-ray Sky

We are proposing a mission devoted to high energy X-ray astronomy that is based on a focusing telescope operating in the 1-200 keV energy range but optimized for the hard X-ray range. The main scientific topics concern: Physics of compact objects: The proximity of compact objects provides a unique laboratory to study matter and radiation in extreme conditions of temperature and density in strong gravitational environment. The emission of high energy photons from these objects is far from being understood. The unprecedented sensitivity in the high energy domain will allow a precise determination of the non-thermal processes at work in the vicinity of compact objects. The full 1-200 keV energy coverage will be ideal to disentangle the emission processes produced in the spacetime regions most affected by strong-gravity, as well as the physical links: disk-thermal emission-iron line-comptonisation-reflection-non-thermal emission-jets. Neutron stars-magnetic field-cyclotron lines: Time resolved spectroscopy (and polarimetry) at ultra-high sensitivity of AXP, milliseconds pulsars and magnetars will give new tools to study the role of the synchrotron processes at work in these objects. Cyclotron lines-direct measurement of magnetic filed-equation of state constraints-short bursts-giant flares could all be studied with great details. AGN: The large sensitivity improvement will provide detailed spectral properties of the high energy emission of AGN's. This will give a fresh look to the connection between accretion and jet emission and will provide a new understanding of the physical processes at work. Detection of high-redshift active nuclei in this energy range will allow to introduce an evolutionary aspect to high-energy studies of AGN, probing directly the origin of the Cosmic X-ray Background also in the non-thermal range (> 20 keV). Element formation-Supernovae: The energy resolution achievable for this mission (<0.5 keV) and a large high energy effective area are ideally suited for the 44Ti line study (68 and 78 keV). This radioactive nuclei emission will give an estimate of their quantities and speed in their environment. In addition the study of the spatial structure and spectral emission of SNR will advance our knowledge of the dynamics of supernovae explosions, of particles acceleration mechanisms and how the elements are released in the interstellar medium. Instrumental design: The progress of X-ray focusing optics techniques allows a major step in the instrumental design: the collecting area becomes independent of the detection area. This drastically reduces the instrumental background and will open a new era. The optics will be based on depth-graded multi-layer mirrors in a Wolter I configuration. To obtain a significant effective area in the hundred of keV range a focal length in the 40-50 meters range (attainable with a deployable mast) is needed. In addition such a mission could benefit from recent progress made on mirror coating. We propose to cover the 1-200 keV energy range with a single detector, a double-sided Germanium strip detector operating at 80 K. The main features will be: (a) good energy resolution (.150 keV at 5 keV and <.5 keV at 100 keV), (b) 3 dimensional event localization with a low number of electronic chains, (c) background rejection by the 3D localization, (d) polarisation capabilities in the Compton regime.

PHENIX↗
NASA NTRS2003

New ISTP Solar Max: A Multi-Spacecraft Study of the Flow of Ionospheric Plasma

The unique instrumentation on the Polar satellite combined with the simultaneous measurement of different parts of the magnetosphere with multiple satellites make possible the study of magnetospheric processes in a special way. In particular, the study of the ionospheric supply of plasma to the magnetosphere can by accomplished to give important results on the plasmas which drive the dynamics of the magnetosphere. This study concentrated on the period of September to December, 2001 in which the Polar orbit had precessed to the point that the line of apsides was near the equatorial plane. This unique orbital configuration enabled the TIDE instrument to measure outflowing ions across the polar cap and then transit the magnetotail lobes and observe the dramatic change in plasma characteristics as the satellite entered the plasma sheet. Contact was made with investigators on the Cluster and Geotail satellite missions and corresponding time frames were studied in the data. There were two approximate conjunctions between Polar and Geotail and data were compared to look for features which might be related. The higher energy concentration of the Geotail instrument made direct comparisons with TIDE difficult, and the Cluster measurements did not surface any cases that corresponded closely in space and time. There were, however, many interesting aspects of the Polar orbits which permitted the observation of the changing ionospheric outflowing plasma characteristics. As in earlier measurements, the ionospheric plasma could be seen flowing up the magnetic field lines out of the northern and southern polar caps. Its energy suggested a polar wind origin energized by the centrifugal acceleration of flow through the polar cusp. The roughly 10eV ions then moved out into the lobes of the magnetotail where they could be seen flowing toward the plasma sheet in both the northern and southern magnetotail lobes. There was also a double field-aligned region of warm ions observed just outside the plasmasphere, stretching toward the auroral zone and inner plasma sheet boundary. Upon entering the plasma sheet, the plasma energy jumped from 10 s of eV to greater than 1 keV. The single field aligned flows transitioned to highly variable spatially choppy energized ion distributions with a variety of pitch angle configurations. This pattern was quite repeatable in all of the Polar orbits that were examined and are compatible with the source of ions being the polar wind which is then energized to 10 s of eV by the centrifugal acceleration. These modestly energized polar wind ions are then carried to the magnetotail where they are substantially energized by the curvature drift-induced movement across the cross-tail potential of the magnetotail. This latter drift energizes the ions to the energies typically found in the plasma sheet. Subsequent drift and energization can cause the ions to become part of the ring current. The results of this study were presented at the Spring AGU meeting in 2002 and the GEM meeting in June 2003. They are the foundation for a paper that has been submitted by Matthew Huddleston to the Journal of Geophysical Research in December 2003. This work was part of the thesis that Matthew completed in finishing his Ph.D. in Physics at Vanderbilt University.

Chappell, Charles R.↗
NASA NTRS2022

COSMO: The COronal Solar Magnetism Observatory

The COronal Solar Magnetism Observatory (COSMO) will make the first synoptic, simultaneous measurements of magnetic and plasma properties of the global solar atmosphere, filling crucial gaps in our understanding of the drivers of solar eruptions and the evolution of the coronal magnetic field on time scales from minutes to decades. - COSMO uniquely addresses critical Heliophysics science. With an unparalleled combination of large field of view and high magnetic sensitivity, the 1.5m COSMO Large Coronagraph (LC) opens a new window on coronal magnetism on global scales. Along with K-Coronagraph (K-Cor) middle-corona observations and the Chromosphere and Prominence Magnetometer (ChroMag) observations of the photosphere and chromosphere, these capabilities enable researchers to finally answer crucial questions about solar eruptions, coronal heating/solar wind acceleration, and the solar dynamo. - COSMO is mature. K-Cor has been operating at the Mauna Loa Solar Observatory (MLSO) since 2013 and ChroMag is soon to be deployed. Also at MLSO, the 20cm Upgraded Coronal Multichannel Polarimeter (UCoMP) is proving the power of global coronal spectropolarimetry and whetting the community’s appetite for the unprecedented sensitivity of the LC. - COSMO is low risk. A recent development: the NSF-funded COSMO Site and Design Advancement (COSADA) is a three-year effort currently underway that reduces risk through site selection and final design of the LC. - COSMO has broad community support. The fact that COSMO fills a critical gap in our observational capabilities was recognized in the last Solar and Space Physics Decadal Survey. COSMO builds on the legacy and thriving user base of the MLSO, which has provided global synoptic solar observations to the community for over sixty years. - COSMO is complementary to other solar telescopes. The breakthrough observations obtained by COSMO will not be provided by any other current or proposed observatory, and will enhance the value of other ground- and space-based Heliophysics assets.

Steven Tomczyk↗
NASA NTRS2023

CME Propagation Through the Heliosphere: Status and Future of Observations and Model Development

The ISWAT (International Space Weather Action Teams) heliosphere clusters H1 and H2 have a focus on interplanetary space and its characteristics, especially on the large-scale co-rotating and transient structures impacting Earth. Solar wind stream interaction regions, generated by the interaction between high-speed solar wind originating in large-scale open coronal magnetic fields and slower solar wind from closed magnetic fields, are regions of compressed plasma and magnetic field followed by high-speed streams that recur at the ~27 day solar rotation period. Short-term reconfigurations of the lower coronal magnetic field generate flare emissions and provide the energy to accelerate enormous amounts of magnetised plasma and particles in the form of coronal mass ejections into interplanetary space. The dynamic interplay between these phenomena changes the configuration of interplanetary space on various temporal and spatial scales which in turn influences the propagation of individual structures. While considerable efforts have been made to model the solar wind, we outline the limitations arising from the rather large uncertainties in parameters inferred from observations that make reliable predictions of the structures impacting Earth difficult. Moreover, the increased complexity of interplanetary space as solar activity rises in cycle 25 is likely to pose a challenge to these models. Combining observational and modeling expertise will extend our knowledge of the relationship between these different phenomena and the underlying physical processes, leading to improved models and scientific understanding and more-reliable space-weather forecasting. The current paper summarizes the efforts and progress achieved in recent years, identifies open questions, and gives an outlook for the next 5–10 years. It acts as basis for updating the existing COSPAR roadmap by Schrijver et al. (2015), as well as providing a useful and practical guide for peer-users and the next generation of space weather scientists.

Space weather↗
NASA NTRS1995

Relativistic timescale analysis suggests lunar theory revision

The SI second of the atomic clock was calibrated to match the Ephemeris Time (ET) second in a mutual four year effort between the National Physical Laboratory (NPL) and the United States Naval Observatory (USNO). The ephemeris time is 'clocked' by observing the elapsed time it takes the Moon to cross two positions (usually occultation of stars relative to a position on Earth) and dividing that time span into the predicted seconds according to the lunar equations of motion. The last revision of the equations of motion was the Improved Lunar Ephemeris (ILE), which was based on E. W. Brown's lunar theory. Brown classically derived the lunar equations from a purely Newtonian gravity with no relativistic compensations. However, ET is very theory dependent and is affected by relativity, which was not included in the ILE. To investigate the relativistic effects, a new, noninertial metric for a gravitated, translationally accelerated and rotating reference frame has three sets of contributions, namely (1) Earth's velocity, (2) the static solar gravity field and (3) the centripetal acceleration from Earth's orbit. This last term can be characterized as a pseudogravitational acceleration. This metric predicts a time dilation calculated to be -0.787481 seconds in one year. The effect of this dilation would make the ET timescale run slower than had been originally determined. Interestingly, this value is within 2 percent of the average leap second insertion rate, which is the result of the divergence between International Atomic Time (TAI) and Earth's rotational time called Universal Time (UT or UTI). Because the predictions themselves are significant, regardless of the comparison to TAI and UT, the authors will be rederiving the lunar ephemeris model in the manner of Brown with the relativistic time dilation effects from the new metric to determine a revised, relativistic ephemeris timescale that could be used to determine UT free of leap second adjustments.

Deines, Steven D.↗
NASA NTRS1999

Radiation Effects: Core Project

The risks to personnel in space from the naturally occurring radiations are generally considered to be one of the most serious limitations to human space missions, as noted in two recent reports of the National Research Council/National Academy of Sciences. The Core Project of the Radiation Effects Team for the National Space Biomedical Research Institute is the consequences of radiations in space in order to develop countermeasure, both physical and pharmaceutical, to reduce the risks of cancer and other diseases associated with such exposures. During interplanetary missions, personnel in space will be exposed to galactic cosmic rays, including high-energy protons and energetic ions with atomic masses of iron or higher. In addition, solar events will produce radiation fields of high intensity for short but irregular durations. The level of intensity of these radiations is considerably higher than that on Earth's surface, and the biological risks to astronauts is consequently increased, including increased risks of carcinogenesis and other diseases. This group is examining the risk of cancers resulting from low-dose, low-dose rate exposures of model systems to photons, protons, and iron by using ground-based accelerators which are capable of producing beams of protons, iron, and other heavy ions at energies comparable to those encountered in space. They have begun the first series of experiments using a 1-GeV iron beam at the Brookhaven National Laboratory and 250-MeV protons at Loma Linda University Medical Center's proton synchrotron facility. As part of these studies, this group will be investigating the potential for the pharmaceutical, Tamoxifen, to reduce the risk of breast cancer in astronauts exposed to the level of doses and particle types expected in space. Theoretical studies are being carried out in a collaboration between scientists at NASA's Johnson Space Center and Johns Hopkins University in parallel with the experimental program have provided methods and predictions which are being used to assess the levels of risks to be encountered and to evaluate appropriate strategies for countermeasures. Although the work in this project is primarily directed toward problems associated with space travel, the problem of protracted exposures to low-levels of radiation is one of national interest in our energy and defense programs, and the results may suggest new paradigms for addressing such risks.

Dicello, John F.↗