Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorption coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Electron mobility and free-carrier absorption in GaAs - Determination of the compensation ratio

Theoretical calculations of electron mobility and free-carrier absorption in n-type GaAs at room temperature were carried out taking into consideration all major scattering processes. It was found that satisfactory agreement between theoretical and experimental results on free-carrier absorption is obtained only when the effect of compensation is quantitatively taken into account. In conjunction with experimental studies it is shown that the electron mobility (for n greater than 10 to the 15th per cu cm) and free-carrier absorption (for n greater than 10 to the 16th per cu cm) are sufficiently sensitive to the ionized impurity concentration to provide a reliable means for determining the compensation ratio. Convenient procedures are presented for the determination of the compensation ratio from the free-carrier absorption coefficient and from the computed values of room-temperature electron mobility. Values of the compensation ratio obtained by these two procedures are in good agreement provided the carrier-concentration variations in the material are not appreciably greater than 10%.

Walukiewicz, W.↗

Calculation of radiative properties of nonequilibrium hydrogen plasma

A computer program called NEQRAP is described that calculates the radiative properties of nonequilibrium ionized hydrogen. From the given electron temperature, electron density, and atom density values (which do not necessarily satisfy the equilibrium relationship) and intensities of incident radiation, the non-Boltzmann populations of electronic states are computed by solving the equation of quasi-steady-state population distribution. Emission and absorption coefficients are determined as functions of wavelength by invoking the principle of detailed balance between the upper and lower states of each radiative transition. Radiative transport through the medium is computed assuming a one-dimensional uniform slab. The rate of ionic reaction is also computed. When used on a sample case, the program shows that there is a large difference between the calculated intensities of radiation emitted by a bulk of equilibrium and nonequilibrium hydrogen. The accuracy of the program is estimated to be better than 10%.

Park, C.↗

Jupiter's atmospheric composition and cloud structure deduced from absorption bands in reflected sunlight

The spectrum of sunlight reflected by Jupiter is analyzed by comparing observations of Woodman (1979) with multiple-scattering computations. The analysis yields information on the vertical cloud structure at several latitudes and on the abundance of CH4 and NH3 in the atmosphere of Jupiter. The abundances of CH4 and NH3 suggest that all ices and rocks are overabundant on Jupiter by a factor of 2 or more, providing an important constraint on models for the formation of Jupiter from the primitive solar nebula. The pressure level of the clouds, the gaseous NH3 abundance, the mean temperature profile, and the Clausius-Clapeyron relation suggest that these clouds are predominantly ammonia crystals with the cloud bottom at 600-700 mb. A diffuse distribution of aerosols exists between 150 and 500 mb, and the spectral variation of albedo reflects a changing bulk absorption coefficient of the material composing the aerosols and is diagnostic of the aerosol composition.

Sato, M.↗

Experimental setup for decomposition of UF6

The rate at which UF6 decomposes into UF5 and UF4 was determined as a function of neutron fluence. To study UF6 decomposition rate, an absorption cell for VUV and the associated VUV spectroscopy system was used to measure UF6 while under irradiation. The cell contains 50 torr of UF6 at room temperature to insure that the UF6 is in a gaseous state. It is shown that by determining the absorption coefficient below 2100A for UF6, above 2100A for F2, and at 4100A for cell degradation, UF6 decomposition can be measured at a neutron flux of 10 to the 12th power/sq cm for 72 continuous hours.

Rowe, M.↗

Adaptation and optimization of a line-by-line radiative transfer program for the STAR-100 (STARSMART)

A program to calculate upwelling infrared radiation was modified to operate efficiently on the STAR-100. The modified software processes specific test cases significantly faster than the initial STAR-100 code. For example, a midlatitude summer atmospheric model is executed in less than 2% of the time originally required on the STAR-100. Furthermore, the optimized program performs extra operations to save the calculated absorption coefficients. Some of the advantages and pitfalls of virtual memory and vector processing are discussed along with strategies used to avoid loss of accuracy and computing power. Results from the vectorized code, in terms of speed, cost, and relative error with respect to serial code solutions are encouraging.

Rarig, P. L.↗

Theoretical mean colors for RR Lyrae variables

A hydrodynamically pulsating 0.6 solar mass model of a typical RR Lyrae variable was studied with a radiation transport-hydrodynamic computer program to predict theoretical T sub 3 and colors at many phases and to find the proper methods for getting mean colors and the consequent mean effective temperatures. The variable Eddington radiation approximation method was used with gray and with multifrequency absorption coefficients to represent the radiation flow in the outer optically thin layers. Comparison between observed and computed B-V colors indicate that these low Z population 2 models are reasonably accurate using King 1A composition opacities. The well known Oke, Giver, and Searle relation between B-V and T sub e reproduced. Mean colors were found by four different averaging methods. The method that gives a mean color and the mean T sub e closest to the nonpulsating model was the separate intensity means of B and V.

Davis, C. G.↗

Lidar temperature profiling - Performance simulations of Mason's method

In Mason's method (1975) atmospheric temperatures are inferred from a measure of the Boltzmann distribution of rotational states in one of the vibrational bands of O2. Differential absorption is measured using three tunable, narrowband pulse lasers. The outputs of two are tuned to wavelengths at the centers of absorption lines at either end of a particular branch in the band; the third wavelength is in a region of no absorption. The temperature-altitude profile can be calculated from the ratio of the two line absorption coefficients plus a priori knowledge of the line parameters. In the present paper, computer simulations of various lidar configurations are made, using different line pairs in the atmospheric bands of O2 (approximately 630, 690, and 760 nm). Simulated results are presented for temperature profiles measured from a Space Shuttle lidar.

Schwemmer, G. K.↗

Band model calculations for CFCl3 in the 8-12 micron region

A Goody random band model with a Voigt line profile is used to calculate the band absorption of CFCl3 at various pressures at room and stratospheric (216 K) temperatures. Absorption coefficients and line spacings are computed.

Silvaggio, P. M.↗

Optical properties of solid CO2 - Application to Mars

Using a special low-temperature cell, thick layers of solid CO2 are grown on an infrared-transparent window. The transmission spectra of solid CO2 is measured from 4000 to 360 kaysers (2.5-27.8 microns). The complex index of refraction is derived for samples of different thicknesses. Scattering in the samples is the major source of error. Away from the major absorption bands the imaginary index is very low. The absorption coefficient is of the order of 1 kayser. The emissivity in the Viking IRTM 20-micron band of a solid surface of CO2 is estimated at 0.72 + 0.17 or -0.10. Snowlike deposits have similar or lower emissivity. The results of this paper relieve the need for exceptional meteorology to explain Martian brightness temperatures below the CO2 frost point.

Ditteon, R.↗

A power law fit to oxygen absorption at 60 GHz and its application to remote sensing of atmospheric temperature

The paper presents an empirical study of the oxygen spectrum near 60 GHz with reference to its applicability to the remote sensing of the tropospheric and lower stratospheric temperature. It is demonstrated that the absorption coefficient of oxygen at 60 GHz can be fitted to the power law form with a relative rms error of about 8%. The power law form, when used in conjunction with the weighting function, permits the definition of some basic quantities in the passive remote sensing of the atmospheric temperature. It is shown how the power law form has been utilized in processing data from the Nimbus 5 microwave spectrometer experiment. The algorithm presented can be applied to spectrometer experiments at infrared frequencies.

Poon, R. K. L.↗

Optoacoustic detection using Stark modulation

Stark modulation of the absorbed laser radiation in an optoacoustic detector (or spectrophone) is reported. Measurements were made over a range of total pressure between 760 Torr and 50 Torr. Greatly enhanced molecular discrimination is suggested due to the tuning ability of the Stark-shifted absorption. The background signal obtained by operating in this mode is more than 500 times smaller than that obtained by operating the same optoacoustic detector in the conventional chopped radiation mode. The responsivity of the optoacoustic detector and the absorption coefficient of C2H4 are presented as a function of total pressure.

Kavaya, M. J.↗

Computation of infrared cooling rates in the water vapor bands

A fast and accurate method is developed for calculating the infrared radiative terms due to water vapor - specifically, the atmospheric cooling rates. The accuracy is achieved by avoiding the constraints of band models and working directly with the absorption coefficient, which is a function of temperature and pressure as well as wavenumber. The method is based on calculation of an equivalent water vapor amount between atmospheric pressure levels and a table look-up procedure. Compared to line-by-line calculations, the present method has errors up to 4% of the maximum cooling rate. The use of a scaling factor, based on the far-wing approximation, limits the applicability of the method to the troposphere and lower stratosphere, where the line wings are responsible for most of the radiative cooling associated with water vapor.

Chou, M.-D.↗

Effects of grain boundaries in polycrystalline solar cells

In polycrystalline solar cells, the short-circuit current is reduced (compared to single-crystal cells) due to recombination of minority carriers at the grain boundaries. The magnitude of this reduction is calculated for the case of a monochromatic beam of light, assuming that both the light beam and the grain boundaries are perpendicular to a p-n junction. The photoresponse of the junction is calculated in terms of the absorption coefficient of the light, the minority-carrier diffusion length, the surface recombination velocity at the grain boundary and the distance of the light beam from the grain boundary. The analysis gives an expression for an effective grain boundary width which depends on wavelength. This width determines the reduction in short-circuit current of solar cells made from material with columnar-type grains.

Zook, J. D.↗

Application of methane band-model parameters to the visible and near-infrared spectrum of Uranus

Laboratory band-model absorption coefficients of CH4 were used to calculate the Uranus spectrum from 5400 to 10,400 A. A good fit for both strong and weak bands for the Uranus spectrum over the entire wavelength interval was achieved; three atmospheric models were employed: (1) a reflecting layer model; (2) a homogeneous scattering layer model; and (3) a clear atmosphere sandwiched between two scattering layers. The spectrum for the reflecting layer model shows serious discrepancies but indicates that large amounts of CH4 are necessary to reproduce the Uranus spectrum. Both scattering models gave reasonably good fits; the homogeneous model requires a particle scattering albedo of at least 0.998 and an abundance per scattering mean free path of about 1 km-am. For the sandwich model, a continuum single scattering albedo of 0.995 was derived for the upper scattering layer, and the scattering optical depth variable wavelength was consistent with Rayleigh scattering.

Benner, D. C.↗

Test and evaluation of water vapor radiometers

The accuracy of very long baseline interferometry in geodetic and astrometric applications is primarily limited by the propagation delays through the troposphere. The part of this delay that is most difficult to predict is due to atmospheric water vapor which can contribute up to about 40 cm of excess propagation path at microwave frequencies. The water vapor content in the atmosphere is variable and is not well correlated with surface meteorological variables. The brightness temperature measured near the transition of water vapor at 22.2 GHz and the propagation delay due to water vapor, or wet path length, are well correlated. This correlation is not perfect because the absorption coefficient and index of refraction do not have the same dependence on temperature and pressure.

Moran, J.↗

Laser-heated thruster

The development of computer codes for the thrust chamber of a rocket of which the propellant gas is heated by a CW laser beam was investigated. The following results are presented: (1) simplified models of laser heated thrusters for approximate parametric studies and performance mapping; (3) computer programs for thrust chamber design; and (3) shock tube experiment to measure absorption coefficients. Two thrust chamber design programs are outlined: (1) for seeded hydrogen, with both low temperature and high temperature seeds, which absorbs the laser radiation continuously, starting at the inlet gas temperature; and (2) for hydrogen seeded with cesium, in which a laser supported combustion wave stands near the gas inlet, and heats the gas up to a temperature at which the gas can absorb the laser energy.

Kemp, N. H.↗

Cyclotron emission from AM Herculis

The cyclotron absorption coefficients in the ordinary and extraordinary modes are calculated for the shock heated region of AM Her. The equations of radiative transfer are solved and the intensity of the emitted UV radiation determined as a function of angle. The average spectrum is shown to have deviations from the previously predicted Rayleigh-Jeans spectrum and the magnetic field of AM Her is deduced to be roughly 5 x 10 to the 7th power gauss.

Chanmugam, G.↗

Convolution of a Doppler line by a Gaussian instrument function

A simple and direct method is obtained for assessing the distortion of a Doppler line by a Gaussian instrument function. It is suggested that a close approximation to the width of a Gaussian instrument function, or an almost Gaussian function, may be obtained by measuring a line with a Doppler absorption coefficient. The method is applicable to diode laser measurements, and may be used whenever a Gaussian instrument function is a reasonable approximation to real conditions

Fridovich, B.↗