Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Viscous damping of toroidal angular momentum in tokamaks

The Braginskii viscous stress tensor formalism was generalized to accommodate non-axisymmetric 3D magnetic fields in general toroidal flux surface geometry in order to provide a representation for the viscous damping of toroidal rotation in tokamaks arising from various “neoclassical toroidal viscosity” mechanisms. In the process, it was verified that the parallel viscosity contribution to damping toroidal angular momentum still vanishes even in the presence of toroidal asymmetries, unless there are 3D radial magnetic fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of magnetic island dynamics under resonant magnetic perturbation with the TEAR code and validation of the results on T-10 tokamak data

Simulation of the magnetic island evolution under Resonant Magnetic Perturbation (RMP) in rotating T-10 tokamak plasma is presented with intent of TEAR code experimental validation. In the T-10 experiment chosen for simulation, the RMP consists of a stationary error field, a magnetic field of the eddy current in the resistive vacuum vessel and magnetic field of the externally applied controlled halo current in the plasma scrape-off layer (SOL). The halo-current loop consists of a rail limiter, plasma SOL, vacuum vessel, and external part of the circuit. Effects of plasma resistivity, viscosity, and RMP are taken into account in the TEAR code based on the two-fluid MHD approximation. Radial distribution of the magnetic flux perturbation is calculated with account of the externally applied RMP. A good agreement is obtained between the simulation results and experimental data for the cases of preprogrammed and feedback-controlled halo current in the plasma SOL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High spatial and temporal resolution charge exchange recombination spectroscopy on the HL-2A tokamak

A 32/64-channel charge exchange recombination spectroscopy (CXRS) diagnostic system is developed on the HL-2A tokamak (R = 1.65 m, a = 0.4 m), monitoring plasma ion temperature and toroidal rotation velocity simultaneously. A high throughput spectrometer (F/2.8) and a pitch-controlled fiber bundle enable the temporal resolution of the system up to 400 Hz. The observation geometry and an optimized optic system enable the highest radial resolution up to ~1 cm at the plasma edge. The CXRS system monitors the carbon line emission (C VI, n = 8–7, 529.06 nm) whose Doppler broadening and Doppler shift provide ion temperature and plasma rotation velocity during the neutral beam injection. The composite CX spectral data are analyzed by the atomic data and analysis structure charge exchange spectroscopy fitting (ADAS CXSFIT) code. First experimental results are shown for the case of HL-2A plasmas with sawtooth oscillations, electron cyclotron resonance heating, and edge transport barrier during the high-confinement mode (H-mode)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of pedestal turbulence in edge localized mode-free H-mode on experimental advanced superconducting tokamak

Two different pedestal turbulence structures have been observed in edge localized mode-free phase of H-mode heated by lower hybrid wave and RF wave in ion cyclotron range of frequencies (ICRF) on experimental advanced superconducting tokamak. When the fraction of ICRF power P{sub ICRF}/P{sub total} exceeds 0.7, coherent mode is observed. The mode is identified as an electromagnetic mode, rotating in electron diamagnetic direction with a frequency around 50 kHz and toroidal mode number n = −3. Whereas when P{sub ICRF}/P{sub total} is less than 0.7, harmonic mode with frequency f = 40–300 kHz appears instead. The characteristics of these two modes are demonstrated preliminarily. The threshold value of heating power and also the plasma parameters are distinct.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Controlling tokamak geometry with three-dimensional magnetic perturbations

It is shown that small externally applied magnetic perturbations can significantly alter important geometric properties of magnetic flux surfaces in tokamaks. Through 3D shaping, experimentally relevant perturbation levels are large enough to influence turbulent transport and MHD stability in the pedestal region. It is shown that the dominant pitch-resonant flux surface deformations are primarily induced by non-resonant 3D fields, particularly in the presence of significant axisymmetric shaping. The spectral content of the applied 3D field can be used to control these effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tomographic analysis of the nonthermal x-ray bursts during disruption instability in the T-10 tokamak

Non-thermal x-ray radiation (E{sub γ} up to 150 keV) is measured in the T-10 tokamaks during disruption instability using two sets of CdTe detectors (10 vertical and 7 horizontal view detectors). Special narrow cupper tubes collimators with lead screening and CdTe detectors integrated with amplifiers inside metallic containers provides enhanced spatial resolution of the system (r ~ 3 cm) and assures protection from the parasitic hard x-ray (E{sub γ} up to 1.5 MeV) and electromagnetic loads during disruption. Spatial localization of the nonthermal x-ray emissivity is reconstructed using tomographic Cormack technique with SVD matrix inversion. Analysis indicated appearance of an intensive non-thermal x-ray bursts during initial stage of the disruptions at high density. The bursts are characterized by repetitive spikes (2–3 kHz) of the x-ray emissivity from the plasma core area. Analysis indicated that the spikes can be connected with acceleration of the non-thermal electrons in enhanced longitudinal electric fields induced during energy quench at the disruption instability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analysis of the nonlinear behavior of shear-Alfvén modes in tokamaks based on Hamiltonian mapping techniques

We present a series of numerical simulation experiments set up to illustrate the fundamental physics processes underlying the nonlinear dynamics of Alfvénic modes resonantly excited by energetic particles in tokamak plasmas and of the ensuing energetic particle transports. These phenomena are investigated by following the evolution of a test particle population in the electromagnetic fields computed in self-consistent MHD-particle simulation performed by the HMGC code. Hamiltonian mapping techniques are used to extract and illustrate several features of wave-particle dynamics. The universal structure of resonant particle phase space near an isolated resonance is recovered and analyzed, showing that bounded orbits and untrapped trajectories, divided by the instantaneous separatrix, form phase space zonal structures, whose characteristic non-adiabatic evolution time is the same as the nonlinear time of the underlying fluctuations. Bounded orbits correspond to a net outward resonant particle flux, which produces a flattening and/or gradient inversion of the fast ion density profile around the peak of the linear wave-particle resonance. The connection of this phenomenon to the mode saturation is analyzed with reference to two different cases: a Toroidal Alfvén eigenmode in a low shear magnetic equilibrium and a weakly unstable energetic particle mode for stronger magnetic shear. It is shown that, in the former case, saturation is reached because of radial decoupling (resonant particle redistribution matching the mode radial width) and is characterized by a weak dependence of the mode amplitude on the growth rate. In the latter case, saturation is due to resonance detuning (resonant particle redistribution matching the resonance width) with a stronger dependence of the mode amplitude on the growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A real-time laser feedback control method for the three-wave laser source used in the polarimeter-interferometer diagnostic on Joint-TEXT tokamak

A three-wave laser polarimeter-interferometer, equipped with three independent far-infrared laser sources, has been developed on Joint-TEXT (J-TEXT) tokamak. The diagnostic system is capable of high-resolution temporal and phase measurement of the Faraday angle and line-integrated density. However, for long-term operation (>10 min), the free-running lasers can lead to large drifts of the intermediate frequencies (∼100–∼500 kHz/10 min) and decay of laser power (∼10%–∼20%/10 min), which act to degrade diagnostic performance. In addition, these effects lead to increased maintenance cost and limit measurement applicability to long pulse/steady state experiments. To solve this problem, a real-time feedback control method of the laser source is proposed. By accurately controlling the length of each laser cavity, both the intermediate frequencies and laser power can be simultaneously controlled: the intermediate frequencies are controlled according to the pre-set values, while the laser powers are maintained at an optimal level. Based on this approach, a real-time feedback control system has been developed and applied on J-TEXT polarimeter-interferometer. Long-term (theoretically no time limit) feedback of intermediate frequencies (maximum change less than ±12 kHz) and laser powers (maximum relative power change less than ±7%) has been successfully achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Divertor impurity injection using high voltage arcs for impurity transport studies on the Mega Amp Spherical Tokamak

The operation of next-generation fusion reactors will be significantly affected by impurity transport in the scrape-off layer (SOL). Current modelling efforts are restricted by a lack of detailed data on impurity transport in the SOL. In order to address this, a carbon injector has been designed and installed on the Mega Amp Spherical Tokamak (MAST). The injector creates short lived carbon plumes originating at the MAST divertor lasting less than 50 μs. High voltage capacitor banks are used to create a discharge across concentric carbon electrodes located in a probe mounted on the Divertor Science Facility in the MAST lower divertor. This results in a very short plume duration allowing observation of the evolution of the plume and precise localisation of the plume relative to the X-point on MAST. The emission from the carbon plume was imaged using fast visible cameras filtered in order to isolate the carbon II and carbon III emission lines centered around 514 nm and 465 nm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of the alpha particle heating and the helium ash source in an International Thermonuclear Experimental Reactor-like tokamak with an internal transport barrier

A guiding center orbit following code, which incorporates a set of non-singular coordinates for orbit integration, was developed and applied to investigate the alpha particle heating in an ITER-like tokamak with an internal transport barrier. It is found that a relatively large q (safety factor) value can significantly broaden the alpha heating profile in comparison with the local heating approximation; this broadening is due to the finite orbit width effects; when the orbit width is much smaller than the scale length of the alpha particle source profile, the heating profile agrees with the source profile, otherwise, the heating profile can be significantly broadened. It is also found that the stagnation particles move to the magnetic axis during the slowing-down process, thus the effect of stagnation orbits is not beneficial to the helium ash removal. The source profile of helium ash is broadened in comparison with the alpha source profile, which is similar to the heating profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistical analysis and modeling of intermittent transport events in the tokamak scrape-off layer

The turbulence observed in the scrape-off-layer of a tokamak is often characterized by intermittent events of bursty nature, a feature which raises concerns about the prediction of heat loads on the physical boundaries of the device. It appears thus necessary to delve into the statistical properties of turbulent physical fields such as density, electrostatic potential, and temperature, focusing on the mathematical expression of tails of the probability distribution functions. The method followed here is to generate statistical information from time-traces of the plasma density stemming from Braginskii-type fluid simulations and check this against a first-principles theoretical model. The analysis of the numerical simulations indicates that the probability distribution function of the intermittent process contains strong exponential tails, as predicted by the analytical theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density modulation experiment to determine transport coefficients on Joint-TEXT Tokamak

Density modulation experiments have been conducted on Joint-TEXT (J-TEXT) Tokamak Ohmic discharge to investigate particle transport based on a model with constant diffusion plus inward convection. Like the HCN interferometer, the newly developed three-wave polarimeter-interferometer system (POLARIS) is used to measure the perturbed density. The comparison of results between the HCN interferometer and POLARIS is given. The consistent results indicate the validity of the analysis scheme. At lower densities, the typical particle confinement time τ{sub p} is found to increase with electron density, while it saturates at higher densities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The dynamics of short-scale turbulent fluctuations across low-intermediate-high-confinement transition with lower hybrid current drive in the EAST superconducting tokamak

Two different confinement transition discharges, the low-intermediate-high (L-I-H) and the low-intermediate-low (L-I-L) confinement transitions, respectively, have been obtained by lower hybrid current drive with lithium wall conditioning in the EAST superconducting tokamak. The dynamic features of short-scale turbulent fluctuations in the two discharges are investigated by a tangential CO{sub 2} laser collective scattering system. It is found that the great changes of broadband fluctuations in amplitude and structure characteristics are closely related to the choice of the final transition to H-mode. These results could shed light on the understanding of the L-H transition mechanism.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity effects on short wavelength ion temperature gradient mode in elongated tokamak plasmas

The effects of impurity ions on the short wavelength ion temperature gradient (SWITG) driven instability in elongated tokamak plasmas are numerically investigated with the gyrokinetic integral eigenmode equation. It is found that for a moderate electron density gradient, the SWITG mode is first destabilized and then stabilized with increasing elongation κ, which is different from the conventional long wavelength ITG mode. For a large electron density gradient, the elongation can effectively stabilize the SWITG mode. Moreover, the low Z impurity ions with inwardly (outwardly) peaked density profiles have stabilizing (destabilizing) effects on the SWITG modes in elongated plasmas. Interestingly, the high Z tungsten impurity ions with inwardly peaked density profiles play a stronger stabilizing role in the SWITG modes than the low Z impurity ions (such as carbon and oxygen) do. In particular, the high Z tungsten impurity ions with a weakly outwardly peaked density profile still have a stabilizing effect. Finally, the critical threshold of impurity density gradient scale length for exciting impurity mode is also numerically obtained, indicating that the impurity mode is harder to be excited in elongated plasmas than in circular ones.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of visible bremsstrahlung to Z{sub eff} measurement on the Experimental Advanced Superconducting Tokamak

The multi-channel visible bremsstrahlung measurement system has been developed on Experimental Advanced Superconducting Tokamak (EAST). In addition to providing effective ion charge Z{sub eff} as a routine diagnostic, this diagnostic can also be used to estimate other parameters. With the assumption that Z{sub eff} can be seen as constant across the radius and does not change significantly during steady state discharges, central electron temperature, averaged electron density, electron density profile, and plasma current density profile have been obtained based on the scaling of Z{sub eff} with electron density and the relations between Z{sub eff} and these parameters. The estimated results are in good coincidence with measured values, providing an effective and convenient method to estimate other plasma parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rotational stabilization of the resistive wall modes in tokamaks with a ferritic wall

The dynamics of the rotating resistive wall modes (RWMs) is analyzed in the presence of a uniform ferromagnetic resistive wall with μ{sup ^}≡μ/μ{sub 0}≤4 (μ is the wall magnetic permeability, and μ{sub 0} is the vacuum one). This mimics a possible arrangement in ITER with ferromagnetic steel in test blanket modules or in future experiments in JT-60SA tokamak [Y. Kamada, P. Barabaschi, S. Ishida, the JT-60SA Team, and JT-60SA Research Plan Contributors, Nucl. Fusion 53, 104010 (2013)]. The earlier studies predict that such a wall must provide a destabilizing influence on the plasma by reducing the beta limit and increasing the growth rates, compared to the reference case with μ{sup ^}=1. This is true for the locked modes, but the presented results show that the mode rotation changes the tendency to the opposite. At μ{sup ^}>1, the rotational stabilization related to the energy sink in the wall becomes even stronger than at μ{sup ^}=1, and this “external” effect develops at lower rotation frequency, estimated as several kHz at realistic conditions. The study is based on the cylindrical dispersion relation valid for arbitrary growth rates and frequencies. This relation is solved numerically, and the solutions are compared with analytical dependences obtained for slow (s/d{sub w}≫1) and fast (s/d{sub w}≪1) “ferromagnetic” rotating RWMs, where s is the skin depth and d{sub w} is the wall thickness. It is found that the standard thin-wall modeling becomes progressively less reliable at larger μ{sup ^}, and the wall should be treated as magnetically thick. The analysis is performed assuming only a linear plasma response to external perturbations without constraints on the plasma current and pressure profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of a magnetic island by edge turbulence in tokamak plasmas

We investigate, through extensive 3D magneto-hydro-dynamics numerical simulations, the nonlinear excitation of a large scale magnetic island and its dynamical properties due to the presence of small-scale turbulence. Turbulence is induced by a steep pressure gradient in the edge region [B. D. Scott, Plasma Phys. Controlled Fusion 49, S25 (2007)], close to the separatrix in tokamaks where there is an X-point magnetic configuration. We find that quasi-resonant localized interchange modes at the plasma edge can beat together and produce extended modes that transfer energy to the lowest order resonant surface in an inner stable zone and induce a seed magnetic island. The island width displays high frequency fluctuations that are associated with the fluctuating nature of the energy transfer process from the turbulence, while its mean size is controlled by the magnetic energy content of the turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytical model of wall forces produced by kink perturbations in tokamaks

Analytical model of the electromagnetic forces produced by kink modes on the tokamak wall [H. R. Strauss et al., Phys. Plasmas 17, 082505 (2010)] is revisited. One of the main conclusions of the mentioned paper is that the largest force occurs at γτ{sub w}≈1, where γ is the kink growth rate and τ{sub w} is the wall penetration time. In the present study, a similar approach is developed under less restrictive assumptions on the plasma and dynamics of perturbation, and a different result is obtained: the force increases with γ and must be maximal at γτ{sub w}→∞. Additionally, the dependence of its amplitude on the plasma parameters is clarified. All distinctions and their reasons are explained in detail. The analysis is performed in the cylindrical model incorporating a resistive wall treated without traditional thin-wall constraints and covering therefore a full range in γτ{sub w}. It is applicable to either locked or rotating modes. Estimates of the sideways force are presented and compared with earlier forecasts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗