Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL NEUTRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Chandra Observations of the Crab Pulsar as a Function of Pulse Phase

The Chandra X-Ray Observatory was used to observe the Crab Nebula and its pulsar using the LETGS, i.e. the Low-Energy Transmission Grating (LETG) with the High Resolution Camera Spectroscopy detector (HRC-S). Data from the zeroth-order image was utilized to isolate the pulsar from the surrounding nebula and to measure the pulsar emission as a function of pulse phase. HRC timing problems were overcome by developing special techniques to process the data. For the first time, pulsed x-ray emission has been detected at all pulse phases, allowing us to set a new upper limit to the thermal emission from the surface of the neutron star.

Weisskopf, Martin C.↗
NASA NTRS2002

A Remarkable Three Hour Thermonuclear Burst from 4U 1820-30

We present a detailed observational and theoretical study of an approximately three hour long X-ray burst (the "super burst") observed by the Rossi X-ray Timing Explorer (RXTE) from the low mass X-ray binary (LMXB) 4U 1820-30. This is the longest X-ray burst ever observed from this source, and perhaps one of the longest ever observed in great detail from any source. We show that the super burst is thermonuclear in origin. Its peak luminosity of approximately 3.4 x 10(exp 38) ergs s(exp -1) is consistent with the helium Eddington limit for a neutron star at approximately 7 kpc, as well as the peak luminosity of other, shorter, thermonuclear bursts from the same source. The super burst begins in the decaying tail of a more typical (approximately equal to 20 s duration) thermonuclear burst. These shorter, more frequent bursts are well known helium flashes from this source. The level of the accretion driven flux as well as the observed energy release of upwards of 1.5 x 10(exp 42) ergs indicate that helium could not be the energy source for the super burst. We outline the physics relevant to carbon production and burning on helium accreting neutron stars and present calculations of the thermal evolution and stability of a carbon layer and show that this process is the most likely explanation for the super burst. Ignition at the temperatures in the deep carbon "ocean" requires greater than 30 times the mass of carbon inferred from the observed burst energetics unless the He flash is able to trigger a deflagration from a much smaller mass of carbon. We show, however, that for large columns of accreted carbon fuel, a substantial fraction of the energy released in the carbon burning layer is radiated away as neutrinos, and the heat that is conducted from the burning layer in large part flows inward, only to be released on timescales longer than the observed burst. Thus the energy released during the event possibly exceeds that observed in X-rays by more than a factor of ten, making the scenario of burning a large mass of carbon at great depths consistent with the observed fluence without invoking any additional trigger. A strong constraint on this scenario is the recurrence time: to accrete an ignition column of 1013 g cm (exp -1) takes approximately 13/(M/3 x 10(exp 17) g s(exp -1) yr. Spectral analysis during the super burst reveals the presence of a broad emission line between 5.8 - 6.4 keV and an edge at 8 - 9 keV likely due to reflection of the burst flux from the inner accretion disk in 4U 1820-30. We believe this is the first time such a signature has been unambiguously detected in the spectrum of an X-ray burst.

Strohmayer, Tod E.↗
NASA NTRS2008

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi

Over the past decade, interest in shape memory alloy based actuators has increased as the primary benefits of these solid-state devices have become more apparent. However, much is still unknown about the characteristic behavior of these materials when used in actuator applications. Recently we have shown that the maximum temperature reached during thermal cycling under isobaric conditions could significantly affect the observed mechanical response of NiTi (55 wt% Ni), especially the amount of transformation strain available for actuation and thus work output. This investigation extends that original work to ascertain whether further increases in the upper-cycle temperature would produce additional improvement in the work output of the material, which has a stress-free Af of 113 oC, and to determine the optimum cyclic conditions. Thus, isobaric, thermal-cycle experiments were conducted in the aforementioned alloy at various stress levels from 50-300 MPa using upper-cycle temperatures of 165, 200, 230, 260, 290, 320 and 350 oC. The data indicated that the amount of applied stress influenced the transformation strain available in the system, as would be expected. However, the maximum temperature reached during the thermal excursion also plays a role in determining the transformation strain, with the maximum transformation strain being developed by thermal cycling to 290 oC. In situ, neutron diffraction showed that the differences in transformation strain were related to differences in martensite texture within the microstructure when cycling to different upper-cycle temperatures. Hence, understanding this effect is important to optimizing the operation of SMA-based actuators and could lead to new methods for processing and training shape memory alloys for optimal performance.

Padula, Santo, II↗
NASA NTRS2011

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi

Over the past decade, interest in shape memory alloy based actuators has increased as the primary benefits of these solid-state devices have become more apparent. However, much is still unknown about the characteristic behavior of these materials when used in actuator applications. Recently we have shown that the maximum temperature reached during thermal cycling under isobaric conditions could significantly affect the observed mechanical response of NiTi (55 wt% Ni), especially the amount of transformation strain available for actuation and thus work output. The investigation we report here extends that original work to ascertain whether further increases in the upper-cycle temperature would produce additional changes in the work output of the material, which has a stress-free austenite finish temperature of 113 C, and to determine the optimum cyclic conditions. Thus, isobaric, thermal-cycle experiments were conducted on the aforementioned alloy at various stresses from 50-300 MPa using upper-cycle temperatures of 165, 200, 230, 260, 290, 320 and 350 C. The data indicated that the amount of applied stress influenced the transformation strain, as would be expected. However, the maximum temperature reached during the thermal excursion also plays an equally significant role in determining the transformation strain, with the maximum transformation strain observed during thermal cycling to 290 C. In situ neutron diffraction at stress and temperature showed that the differences in transformation strain were mostly related to changes in martensite texture when cycling to different upper-cycle temperatures. Hence, understanding this effect is important to optimizing the operation of SMA-based actuators and could lead to new methods for processing and training shape memory alloys for optimal performance.

Padula, Santo, II↗
NASA NTRS2019

A NICER View of PSR J0030+0451: Evidence for a Global-Scale Multipolar Magnetic Field

Recent modeling of Neutron Star Interior Composition Explorer observations of thermal X-ray pulsations from the surface of the isolated millisecond pulsar PSRJ0030+0451 suggests that the hot emitting regions on the pulsar’s surface are far from antipodal, which is at odds with the classical assumption that the magnetic field in the pulsar magnetosphere is predominantly that of a centered dipole. Here, we review these results and examine previous attempts to constrain the magnetospheric configuration of PSRJ0030+0451. To the best of our knowledge, there is in fact no direct observational evidence that PSRJ0030+0451’s magnetic field is a centered dipole. Developing models of physically motivated, non-canonical magnetic field configurations and the currents that they can support poses a challenging task. However, such models may have profound implications for many aspects of pulsar research, including pulsar braking, estimates of birth velocities, and interpretations of multi-wavelength magnetospheric emission.

A V Bilous↗
NASA NTRS2021

HARM3D+NUC: A New Method for Simulating the Post-merger Phase of Binary Neutron Star Mergers with GRMHD, Tabulated EOS, and Neutrino Leakage

The first binary neutron star merger has already been detected in gravitational waves. The signal was accompanied by an electromagnetic counterpart including a kilonova component powered by the decay of radioactive nuclei, as well as a short γ-ray burst. In order to understand the radioactively powered signal, it is necessary to simulate the outflows and their nucleosynthesis from the post-merger disk. Simulating the disk and predicting the composition of the outflows requires general relativistic magnetohydrodynamical (GRMHD) simulations that include a realistic, finite-temperature equation of state (EOS) and self-consistently calculating the impact of neutrinos. In this work, we detail the implementation of a finite-temperature EOS and the treatment of neutrinos in the GRMHD code HARM3D+NUC, based on HARM3D. We include formal tests of both the finite-temperature EOS and the neutrino-leakage scheme. We further test the code by showing that, given conditions similar to those of published remnant disks following neutron star mergers, it reproduces both recombination of free nucleons to a neutron-rich composition and excitation of a thermal wind.

Ariadna Murguia-Berthier↗
NASA NTRS2022

MAXI J1957+032: A New Accreting Millisecond X-ray Pulsar in an Ultra-Compact Binary

The detection of coherent X-ray pulsations at ∼314 Hz (3.2 ms) classifies MAXI J1957+032 as a fast-rotating, accreting neutron star. We present the temporal and spectral analysis performed using NICER observations collected during the latest outburst of the source. Doppler modulation of the X-ray pulsation revealed the ultra-compact nature of the binary system characterized by an orbital period of ∼1 h and a projected semimajor axis of 14 lt-ms. The neutron star binary mass function suggests a minimum donor mass of 1.7 × 10 −2 M ⊙ , assuming a neutron star mass of 1.4 M ⊙ and a binary inclination angle lower than 60 deg. This assumption is supported by the lack of eclipses or dips in the X-ray light curve of the source. We characterized the 0.5–10 keV energy spectrum of the source in outburst as the superposition of a relatively cold black-body-like thermal emission compatible with the emission from the neutron star surface and a Comptonization component with photon index consistent with a typical hard state. We did not find evidence for iron K α lines or reflection components.

X-rays:binaries↗
DOE OSTI2021

Effects of sample bias on adhesion of magnetron sputtered Cr coatings on SiC

Swelling of SiC at 300 C due to in-service neutron irradiation causes tensile residual stresses in coatings which are expected to adversely affect the performance of coated SiC composite fuel cladding for light water reactors. Matching the coating swelling with the substrate, a solution common for thermal expansion, is not practical in the case of neutron irradiation. Biasing samples during magnetron sputtering deposition induces compressive residual stress which may counteract this. In this study, chromium coatings were deposited on SiC by DC magnetron sputtering with no external heating at bias voltages of –50V, –75V, and –100V. The effects of the bias voltage on morphology, residual stress, microstrain, texture, and adhesion are shown. The low deposition temperature resulted in the coating microstructure evolution following an energetic particle bombardment dominated trend. Additionally, at the two lower bias voltages knock-on implantation dominated increasing the residual stress and microstrain while at the highest bias voltage, thermal spike migration allowed for defect relaxation. When the knock-on induced compressive residual stress exceeded 0.8 GPa microcrack formation in the SiC substrate decreased coating adhesion. While no microcracks formed at the lowest bias voltage, insufficient atomic mobility during coating growth lead to voids forming in the coating. A balance is needed to form void-free coatings that have high compressive residual stress.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Inferring thermal ion temperature and residual kinetic energy from nuclear measurements in inertial confinement fusion implosions

In inertial con finement fusion implosion experiments, the presence of residual anisotropic fluid motion within the stagnating hot spot leads to signifi cant variations in ion-temperature measurements using neutron time- of-flight detectors along different lines of sight. The minimum ion-temperature measurement is typically used as representative of the thermal temperature. In the presence of isotropic flows, however, even the minimum DT neutron-inferred ion temperature can be well above the plasma thermal temperature. Using both DD and DT neutron-inferred ion-temperature measurements, we show that it is possible to determine the contribution of isotropic flows and infer the DT burn-averaged thermal ion temperature. The contribution of large isotropic flows on driving the ratio of DD to DT neutron-inferred ion temperatures well below unity and approaching the lower bound of 0.8 is demonstrated in multimode simulations. The minimum DD neutron- inferred ion temperature is determined from the velocity variance analysis, accounting for the presence of isotropic flows. Being close to the DT burn-averaged thermal ion temperature, the inferred DD minimum ion temperatures demonstrate a strong correlation with the experimental yields in the OMEGA implosion database. An analytical expression is also derived to explain the effect of mode ℓ = 1 ion-temperature measurement asymmetry on yield degradations caused by the anisotropic flows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Advanced High-Temperature Sodium-Cooled Thermal Reactors Using Less Than 10% Enriched UO 2 Fuel

Here, this paper presents a 1200-MW(thermal) advanced sodium-cooled thermal reactor concept that uses online refueling of 3.5% to 9.95% enriched UO2 fuel pin bundles; uses either graphite or beryllium oxide (BeO) as a neutron moderator; reaches outlet temperatures of 650°C enabling a thermal efficiency of at least 45%; has a high specific power of 133 W/g U; has average power densities of 16.4 and 43.2 W/cm 3 with graphite and BeO, respectively; reaches an average discharge burnup of 100 MWd/kg U; and generates 52% less spent fuel volume, 28% less fission products, and 47% to 64% less transuranics than a typical large pressurized water reactor for the same amount of electricity produced.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1993

The suppression of pulsar and gamma-ray burst annihilation lines by magnetic photon splitting

Neutron stars, relativistic and compact by nature, show great potential for the copious creation of electron-positron pairs in the magnetospheres; these rapidly cool, thermalize, and then annihilate. It is therefore expected that many neutron sources might display evidence of pair annihilation lines in the 400-500 keV range. It is shown that magnetic photon splitting, which operates effectively at these energies and in the enormous neutron star magnetic fields, can destroy an annihilation feature by absorbing line photons and reprocessing them to lower energies. In so doing, photon splitting creates a soft gamma-ray bump and a broad quasi-power-law contribution to the X-ray continuum, which is too flat to conflict with the observed X-ray paucity in gamma-ray bursts. The destruction of the line occurs in neutron stars with surface fields of 5 x 10 exp 12 G or maybe even less, depending on the size of the emission region.

Baring, Matthew G.↗
NASA NTRS1996

Neutron fluences and dose equivalents measured with passive detectors on LDEF

Neutron fluences were measured on LDEF in the low energy (< 1 MeV) and high energy (> 1 MeV) ranges. The low energy detectors used the 6Li(n,alpha)T reaction with Gd foil absorbers to separate thermal (< 0.2 eV) and resonance (0.2 eV-1 MeV) neutron response. High energy detectors contained sets of fission foils (181Ta, 209Bi, 232Th, 238U) with different neutron energy thresholds. The measured neutron fluences together with predicted spectral shapes were used to estimate neutron dose equivalents. The detectors were located in the A0015 and P0006 experiments at the west and Earth sides of LDEF under shielding varying from 1 to 19 g/cm2. Dose equivalent rates varied from 0.8 to 3.3 microSv/d for the low energy neutrons and from 160 to 390 microSv/d for the high energy neutrons. This compares with TLD measured absorbed dose rates in the range of 1000-3000 microGy/d near these locations and demonstrates that high energy neutrons contribute a significant fraction of the total dose equivalent in LEO. Comparisons between measurements and calculations were made for high energy neutrons based on fission fragment tracks generated by fission foils at different shielding depths. A simple 1-D slab geometry was used in the calculations. Agreement between measurements and calculations depended on both shielding depth and threshold energy of the fission foils. Differences increased as both shielding and threshold energy increased. The modeled proton/neutron spectra appeared deficient at high energies. A 3-D model of the experiments is needed to help resolve the differences.

LDEF Project↗
DOE OSTI2021

First principles study of the stability and thermal conductivity of novel Li-Be hybrid ceramics

Hybrid Li-Be ceramics, combining both tritium (T) breeder (Li) and neutron multiplier (Be) for use as part of the fuel cycle of future nuclear fusion reactors are proposed. The development of such hybrid materials may reduce thermal gradients through better matching of thermal properties, mitigating the detrimental effects that may accompany traditional breeder systems while maintaining acceptable neutron multiplication and T breeding. Here, first-principles methods are used to investigate stability and thermal transport properties of a set of compounds containing both Li and Be. It is demonstrated that BeLi 2 O 4 Ge and BeLi 2 O 4 Si are mechanically stable and have formation energies comparable with leading candidates for solid state breeder materials, Li 2 TiO 3 , Li 2 ZrO 3 . It is also demonstrated that similar to the leading candidates, these compounds are insulators with thermal transport defined by phonons. The calculated thermal conductivity of BeLi 2 O 4 Ge is slightly higher compared to Li 2 TiO 3 or Li 2 ZrO 3 while in the BeLi 2 O 4 Si it is almost three times higher compared to the rest of compounds due to a higher phonon group velocities and increased phonon lifetimes. These results indicate that hybrid Li-Be ceramics offer a potential route towards better matching of thermal properties with minimal functional property degradation, thereby offering better overall fuel cycle performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ToF-SIMS spectral analysis of pristine and neutron irradiated single crystal tungsten

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has many promising features in studying materials including high spatial resolution and high mass accuracy of elements, molecules, and isotopes. Its ability to resolve isotopes is especially attractive in studying transmutation products of single crystal tungsten (SCW) post neutron irradiation. Tungsten (W) is a contender of plasma facing materials (PFMs) due to its high thermal and radiological stability. PFMs to be used in the construction of fusion vessels are subject to high temperature and neutron irradiation, resulting in changes to materials including transmutation, which ultimately impact material mechanical and thermal properties. We used IONTOF TOF.SIMS V instrument equipped with a 30 keV Bi 3 + primary ion beam to study pristine SCW and irradiated SCW speciemens. Scanning electron microscope coupled with focused ion beam (SEM-FIB) was used to reduce the dosage of neutron irradiated tungsten and prepare for specimens for SIMS analysis. Static ToF-SIMS spectra were obtained, and transmutation product peak identification was presented in this work. Identified molecules and molecular fragments were compared against isotope theoretical mass to charge ratios of tungsten, rhenium, osmium, and other relevant products. Our results show that ToF-SIMS provides a viable means to study transmutation products of W post neutron irradiation. Such applications are suitable to investigate transmutation effects on materials that are being considered and developed for fusion pilot plants.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Neutron Diffraction Studies of the Atomic Vibrations of Bulk and Surface Atoms of Nanocrystalline SiC

Thermal atomic motions of nanocrystalline Sic were characterized by two temperature atomic factors B(sub core), and B(sub shell). With the use of wide angle neutron diffraction data it was shown that at the diffraction vector above 15A(exp -1) the Wilson plots gives directly the temperature factor of the grain interior (B(sub core)). At lower Q values the slope of the Wilson plot provides information on the relative amplitudes of vibrations of the core and shell atoms.

Stelmakh, S.↗
DOE OSTI2024

Phonon Thermal Transport in UO 2 via Self-Consistent Perturbation Theory

Computing thermal transport from first-principles in UO 2 is complicated due to the challenges associated with Mott physics. Here, we use irreducible derivative approaches to compute the cubic and quartic phonon interactions in UO 2 from first principles, and we perform enhanced thermal transport computations by evaluating the phonon Green’s function via self-consistent diagrammatic perturbation theory. Our predicted phonon lifetimes at T = 600 K agree well with our inelastic neutron scattering measurements across the entire Brillouin zone, and our thermal conductivity predictions agree well with previous measurements. Finally, both the changes due to thermal expansion and self-consistent contributions are nontrivial at high temperatures, though the effects tend to cancel, and interband transitions yield a substantial contribution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of a high-fidelity multi-physics coupling between MCNP6.2 and CTF4.0 for VVER applications

Ensuring system safety in the design, licensing, and operation phases is a priority in the nuclear industry. Performing extensive, full-scale reactor safety experiments is often prohibitive due to the large associated costs. Computational simulations offer an alternative safety analysis method, typically with significant cost reductions. Recent high-level developments in technology and increased availability of computational resources have allowed the development of high-fidelity, high-resolution multi-physics coupled codes. Such developments may be used to generate reference models for deterministic core calculations. Under this framework, the high-fidelity continuous energy Monte Carlo-based neutron transport code MCNP6.2 was coupled externally with the state-of-the-art thermal-hydraulics subchannel code, CTF4.0 for VVER (Water-Water Energetic Reactor) applications. A VVER-1000 fuel assembly model was used to demonstrate the capability of the coupled code. The converged coupled solution is compared to initial results, consisting of the first MCNP evaluation and first CTF evaluation after initialization. The VVER-1000 type assembly results are compared to other evaluations of the same assembly model. The findings indicate good agreement with expectations and reference cases, where available. The initial results of the coupled MCNP6.2/CTF4.0 calculations at the assembly level for steady-state calculations are presented in this study, which may support future work toward high-fidelity coupled full-core modeling capabilities. The multi-physics model may be further improved, enhanced, and expanded for both cycle depletion and transient applications. Such a multi-physics system will also be applicable to the VVER-1200 and other triangular lattice designs and support their deployment and operation safely and economically. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

Microstructural stability of irradiated yttrium hydride under thermal cycles

Hydrides that retain their hydrogen in service are critical for advanced microreactor and space nuclear systems. Hydrogen retention is affected by evolving microstructure under temperature and irradiation extremes. This study investigated microstructural features in neutron-irradiated yttrium hydride and the stability of these features under thermal cycles. Differential scanning calorimetry was used to determine hydrogen desorption and temperatures at which significant phase changes are occurring, and transmission electron microscopy was used for microstructural analysis after each thermal cycle. Cyclic heating led to crystallization and epitaxial growth of surface oxidation and dehydriding of the matrix. Other features such as the bulk matrix crystal structure, irradiation-induced cavities, and matrix precipitation remained constant after thermal cycling. Results allow us to design better hydride alloys through microstructure tailoring and potential irradiation conditioning treatments.

36 MATERIALS SCIENCE↗