Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Systematic error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

A computational study of wingtip vortex flowfield

The near-field behavior of a wingtip vortex flow is studied computationally using an incompressible flow solver for the Navier-Stokes equations based on the artificial compressibility method. Inaccuracies in current computational studies are addressed, especially, the role of numerical errors and transition/turbulence modeling. A subset problem is devised in order to make the study of vortex preservation more tractable. As part of the numerical checks, the flow is first run laminar while performing a systematic grid refinement study for the subset problem. Further studies on the numerical errors are conducted with the measured Reynolds stresses introduced into the momentum equations as source terms. As a preliminary study of turbulent flows, the one-equation Baldwin-Barth turbulence model is implemented as well as the approximation of the production term. The full-geometry case is computed using 1.1 million grid points. The results are compared with experiment.

Dacles-Mariani, Jennifer↗

Crack Turning and Arrest Mechanisms for Integral Structure

In the course of several years of research efforts to predict crack turning and flapping in aircraft fuselage structures and other problems related to crack turning, the 2nd order maximum tangential stress theory has been identified as the theory most capable of predicting the observed test results. This theory requires knowledge of a material specific characteristic length, and also a computation of the stress intensity factors and the T-stress, or second order term in the asymptotic stress field in the vicinity of the crack tip. A characteristic length, r(sub c), is proposed for ductile materials pertaining to the onset of plastic instability, as opposed to the void spacing theories espoused by previous investigators. For the plane stress case, an approximate estimate of r(sub c), is obtained from the asymptotic field for strain hardening materials given by Hutchinson, Rice and Rosengren (HRR). A previous study using of high order finite element methods to calculate T-stresses by contour integrals resulted in extremely high accuracy values obtained for selected test specimen geometries, and a theoretical error estimation parameter was defined. In the present study, it is shown that a large portion of the error in finite element computations of both K and T are systematic, and can be corrected after the initial solution if the finite element implementation utilizes a similar crack tip discretization scheme for all problems. This scheme is applied for two-dimensional problems to a both a p-version finite element code, showing that sufficiently accurate values of both K(sub I) and T can be obtained with fairly low order elements if correction is used. T-stress correction coefficients are also developed for the singular crack tip rosette utilized in the adaptive mesh finite element code FRANC2D, and shown to reduce the error in the computed T-stress significantly. Stress intensity factor correction was not attempted for FRANC2D because it employs a highly accurate quarter-point scheme to obtain stress intensity factors.

Pettit, Richard↗

Simulation results for the Viterbi decoding algorithm

Concepts involved in determining the performance of coded digital communications systems are introduced. The basic concepts of convolutional encoding and decoding are summarized, and hardware implementations of sequential and maximum likelihood decoders are described briefly. Results of parametric studies of the Viterbi decoding algorithm are summarized. Bit error probability is chosen as the measure of performance and is calculated, by using digital computer simulations, for various encoder and decoder parameters. Results are presented for code rates of one-half and one-third, for constraint lengths of 4 to 8, for both hard-decision and soft-decision bit detectors, and for several important systematic and nonsystematic codes. The effect of decoder block length on bit error rate also is considered, so that a more complete estimate of the relationship between performance and decoder complexity can be made.

Batson, B. H.↗

Tests and comparisons of satellite derived geoids with Skylab altimeter data

The SKYLAB-193 radar altimeter was operated nearly continuously around the world on January 31, 1974. This direct measurement of the sea surface topography provided an independent basis for the evaluation of global geoids computed from satellite derived gravity models. The differences between the altimeter geoid and the satellite geoids were as large as 25 meters with rms values ranging from 8 to 10 meters. These differences also indicated a systematic long wavelength variation (approximately 100 deg) not related to error in the SKYLAB orbits. Truncation of the models to degree and order eight did not eliminate the long wavelength variation, but in every case the rms agreement between satellite and altimeter geoids was improved. Orbits computed with the truncated models were in contrast found to be inferior to those computed using the complete models.

Marsh, J. G.↗

EUV analysis of an active region

A sequence of extreme-ultraviolet (EUV) spectroheliograms of McMath region No. 10283 were obtained by OSO-6. The lines O VI (1032 A) Mg X (625 A), Si XII (499 A), and Fe XVI (335 A) were used to determine coronal temperatures and densities above the active region. A comparison of theoretical and observed line ratios yielded coronal temperatures of 2.2 to 2.3 million K above the active region and 2.0 to 2.1 million K in the surrounding area. The temperatures derived from ratios involving the O VI intensities are systematically higher than the others. This is attributed to an error in the theoretical O VI intensities. The intensities observed above the limb are compared with intensities predicted by a simple model based on cylindrical geometry. The overall agreement shows that the assumption of an isothermal corona in hydrostatic equilibrium above the active region is a resonable working hypothesis and that the adopted geometrical model for the electron density distribution is adequate.

Raghavan, N.↗

On the determination and investigation of the terrestrial ionospheric refractive indices using GEOS-3/ATS-6 satellite-to-satellite tracking data

An analysis of the shortening and lengthening of the phase of satellite-to-satellite (SST) data that passed within 40-700 km above the earth surface during its ATS-6 to GEOS-3 to ATS-6 path resulted in refractivity vs height profiles. The SST Doppler data were used directly to adjust the GEOS-3 orbit. Perturbations from the moon, sun, and a 15th-order/degree earth gravity field were included in the orbit solution. This orbit was continued through the occulation period and a model ionosphere was estimated by a least-squares adjustment of the Chapman ionosphere parameters from the SST data residuals. The refractivity profile obtained by this model ionosphere was compared to a refractivity profile obtained by a direct integral inversion of the SST data residuals. Systematic differences between the two methods were caused by orbital errors, which propagated into the solution.

Liu, A. S.↗

On the determination and investigation of the terrestrial ionospheric refractive indices using GEOS-3/ATS-6 satellite-to-satellite tracking data

When the radio link between two satellites (GEOS-3/ATS-6) is intercepted by the earth's ionosphere and neutral atmosphere, a change in the Doppler frequency results. Travel through the atmosphere causes the Doppler phase to be advanced in the ionosphere's portion and retarded in the neutral portion of the atmosphere. Analysis of the shortening and lengthening of the phase of the Satellite-to-Satellite Tracking (SST) data that passed within 40-700 km above the earth's surface during its ATS-6 to GEOS-3 to ATS-6 path, caused by the atmosphere, results in refractivity versus height profiles. The SST Doppler data were used directly to adjust the GEOS-3 orbit. Perturbation from the Moon, Sun and a 15th order/degree earth gravity field were included in the orbit solution. This orbit was continued through the occultation period and a model ionosphere was estimated by a least-square adjustment of the Chapman ionosphere parameters from the SST data residuals. The refractivity profile obtained by this model ionosphere was compared to a refractivity profile obtained by a direct integral inversion of the SST data residuals. Systematic differences between the 2 methods were caused by orbital errors, which propagated into the solution. The SST data yielded refractive index profiles in a novel economical manner because no additional or special on-board equipment were required.

Liu, A. S.↗

GRB 970616

The transient X-ray XTE source reported below by F. Marshall et al. lies in the error box of a gamma-ray burst seen by BATSE on June 16.757 UT. The Rapid Burst Response location, which was distributed through GRB Coordinates Network/BATSE Coordinates Distribution Network 20 minutes after the initial trigger, was: RA 01h2lm5ls, DEC -07dO9'.4 (J2000) with a 1 sigma error radius of 0.3 deg. statistical and approximately 2 deg. systematic. The burst was multi-peaked with a total duration of about 200 s. A maximum flux of 23.8 +/- 0.5 photons/CM logical and 2/s (above 20 keV) was measured 90 seconds after the trigger time, placing this event in the brightest 2% of all BATSE bursts. Its total fluence above 20 keV is estimated to be 4.01 +/- 0.14 x 10 -5 erg/cm logical and 2.

Connaughton, V.↗

Evaluation of the 29-km Eta Model: Objective Verification at Three Selected Stations - Part 1

This paper describes an objective verification of the National Centers for Environmental Prediction (NCEP) 29-km eta model from May 1996 through January 1998. The evaluation was designed to assess the model's surface and upper-air point forecast accuracy at three selected locations during separate warm (May - August) and cool (October - January) season periods. In order to enhance sample sizes available for statistical calculations, the objective verification includes two consecutive warm and cool season periods. Systematic model deficiencies comprise the larger portion of the total error in most of the surface forecast variables that were evaluated. The error characteristics for both surface and upper-air forecasts vary widely by parameter, season, and station location. At upper levels, a few characteristic biases are identified. Overall however, the upper-level errors are more nonsystematic in nature and could be explained partly by observational measurement uncertainty. With a few exceptions, the upper-air results also indicate that 24-h model error growth is not statistically significant. In February and August 1997, NCEP implemented upgrades to the eta model's physical parameterizations that were designed to change some of the model's error characteristics near the surface. The results shown in this paper indicate that these upgrades led to identifiable and statistically significant changes in forecast accuracy for selected surface parameters. While some of the changes were expected, others were not consistent with the intent of the model updates and further emphasize the need for ongoing sensitivity studies and localized statistical verification efforts. Objective verification of point forecasts is a stringent measure of model performance, but when used alone, is not enough to quantify the overall value that model guidance may add to the forecast process. Therefore, results from a subjective verification of the meso-eta model over the Florida peninsula are discussed in the companion paper by Manobianco and Nutter. Overall verification results presented here and in part two should establish a reasonable benchmark from which model users and developers may pursue the ongoing eta model verification strategies in the future.

Nutter, Paul A.↗

Toward Long-Term Aquatic Science Products from Heritage Landsat Missions

This paper aims at generating a long-term consistent record of Landsat-derived remote sensing reflectance (Rrs) products, which are central for producing downstream aquatic science products (e.g., concentrations of total suspended solids). The products are derived from Landsat-5 and Landsat-7 observations leading to Landsat-8 era to enable retrospective analyses of inland and nearshore coastal waters. In doing so, the data processing was built into the SeaWiFS Data Analysis System (SeaDAS) followed by vicariously calibrating Landsat-7 and -5 data using reference in situ measurements and near-concurrent ocean color products, respectively. The derived Rrs products are then validated using (a) matchups using the Aerosol Robotic Network (AERONET) data measured by in situ radiometers, i.e., AERONET-OC, and (b) ocean color products at select sites in North America. Following the vicarious calibration adjustments, it is found that the overall biases in Rrs products are significantly reduced. The root-mean-square errors (RMSE), however, indicate noticeable uncertainties due to random and systematic noise. Long-term (since 1984) seasonal Rrs composites over 12 coastal and inland systems are further evaluated to explore the utility of Landsat archive processed via SeaDAS. With all the qualitative and quantitative assessments, it is concluded that with careful algorithm developments, it is possible to discern natural variability in historic water quality conditions using heritage Landsat missions. This requires the changes in Rrs exceed maximum expected uncertainties, i.e., 0.0015 [1/sr], estimated from mean RMSEs associated with the matchups and intercomparison analyses. It is also anticipated that Landsat-5 products will be less susceptible to uncertainties in turbid waters with Rrs(660) > 0.004 [1/sr], which is equivalent of ~1.2% reflectance. Overall, end-users may utilize heritage Rrs products with "fitness-for-purpose" concept in mind, i.e., products could be valuable for one application but may not be viable for another. Further research should be dedicated to enhancing atmospheric correction to account for non-negligible near-infrared reflectance in CDOM-rich and extremely turbid waters.

Pahlevan, Nima↗

Statistical tests for closure of plate motion circuits

Two methods, one based on a chi-square test and the second on an F-ratio test, of testing for the plate motion circuit closures are described and evaluated. The chi-square test is used to evaluate goodness of fit, and it is assumed that the assigned errors are accurate estimates of the true errors in the data. The F-ratio test is used to compare variances of distributions, and it is assumed that the relative values of assigned error are accurate. The two methods are applied to the data of Minster and Jordan (1978) on the motion of the three plates that meet at the Galapagos Triple Junction, and the motion of the three plates that meet at the Indian Ocean Triple Junction. It is noted that the F-ratio plate circuit closure test is more useful than the chi-square test for identifying systematic misfits in data because the chi-square test overestimates the errors of plate motion data.

Gordon, Richard G.↗

Error-trellis Syndrome Decoding Techniques for Convolutional Codes

An error-trellis syndrome decoding technique for convolutional codes is developed. This algorithm is then applied to the entire class of systematic convolutional codes and to the high-rate, Wyner-Ash convolutional codes. A special example of the one-error-correcting Wyner-Ash code, a rate 3/4 code, is treated. The error-trellis syndrome decoding method applied to this example shows in detail how much more efficient syndrome decoding is than Viterbi decoding if applied to the same problem. For standard Viterbi decoding, 64 states are required, whereas in the example only 7 states are needed. Also, within the 7 states required for decoding, many fewer transitions are needed between the states.

Reed, I. S.↗

Error-trellis syndrome decoding techniques for convolutional codes

An error-trellis syndrome decoding technique for convolutional codes is developed. This algorithm is then applied to the entire class of systematic convolutional codes and to the high-rate, Wyner-Ash convolutional codes. A special example of the one-error-correcting Wyner-Ash code, a rate 3/4 code, is treated. The error-trellis syndrome decoding method applied to this example shows in detail how much more efficient syndrome decordig is than Viterbi decoding if applied to the same problem. For standard Viterbi decoding, 64 states are required, whereas in the example only 7 states are needed. Also, within the 7 states required for decoding, many fewer transitions are needed between the states.

Reed, I. S.↗

HZETRN Radiation Transport Validation Using Balloon-Based Experimental Data

The deterministic radiation transport code HZETRN (High charge (Z) and Energy TRaNsport) was developed by NASA to study the effects of cosmic radiation on astronauts and instrumentation shielded by various materials. This work presents an analysis of computed differential flux from HZETRN compared with measurement data from three balloon-based experiments over a range of atmospheric depths, particle types, and energies. Model uncertainties were quantified using an interval-based validation metric that takes into account measurement uncertainty both in the flux and the energy at which it was measured. Average uncertainty metrics were computed for the entire dataset as well as subsets of the measurements (by experiment, particle type, energy, etc.) to reveal any specific trends of systematic over- or under-prediction by HZETRN. The distribution of individual model uncertainties was also investigated to study the range and dispersion of errors beyond just single scalar and interval metrics. The differential fluxes from HZETRN were generally well-correlated with balloon-based measurements; the median relative model difference across the entire dataset was determined to be 30%. The distribution of model uncertainties, however, revealed that the range of errors was relatively broad, with approximately 30% of the uncertainties exceeding ± 40%. The distribution also indicated that HZETRN systematically under-predicts the measurement dataset as a whole, with approximately 80% of the relative uncertainties having negative values. Instances of systematic bias for subsets of the data were also observed, including a significant underestimation of alpha particles and protons for energies below 2.5 GeV/u. Muons were found to be systematically over-predicted at atmospheric depths deeper than 50 g/cm(sup 2) but under-predicted for shallower depths. Furthermore, a systematic under-prediction of alpha particles and protons was observed below the geomagnetic cutoff, suggesting that improvements to the light ion production cross sections in HZETRN should be investigated.

James E Warner↗

Error reduction in laser remote sensing - Combined effects of cross correlation and signal averaging

A systematic analysis is presented of the extent to which the accuracy of a differential-absorption lidar (DIAL) measurement may be improved by using the combined effects of signal averaging and temporal cross correlation. Previous studies which considered these effects separately are extended by incorporating both effects into a single analytical framework. In addition, experimental results involving lidar returns from a diffusely reflecting target using a dual-CO2 laser DIAL system with both heterodyne and direct detection are presented. These results are shown to be in good agreement with the theoretical analysis and help establish the limits of accuracy achievable under various experimental conditions.

Menyuk, N.↗

Some long, rate one-half, binary convolutional codes with an optimum distance profile and the systematic versus nonsystematic code question

A tabulation is given of long systematic and long quick-look-in (QLI) nonsystematic rate R = 1/2 binary convolutional codes with an optimum distance profile (ODP). These codes appear attractive for use with sequential decoders. Simulations for two of the new codes are reported and confirm Massey's conjecture that systematic and non-systematic codes of the same rate yield nearly identical computational and error probability performance with sequential decoding when the number of digits transmitted in the tail of the encoded frame is the same for both codes.

Johannesson, R.↗

Tests and comparisons of satellite-derived geoids with Skylab altimeter data

During the Skylab 4 mission, the S-193 radar altimeter was operated nearly continuously for a revolution around the world on Jan. 31, 1974. This direct measurement to the sea surface has provided an independent basis for the evaluation of the precision of global geoids computed from satellite-derived earth gravity models. This paper presents comparisons between the Skylab data and several recent gravity models published by Goddard Space Flight Center, the Smithsonian Astrophysical Observatory, and the National Oceanic and Atmospheric Administration. The differences between the altimeter geoid and the satellite geoids were as large as 20 m, rms values ranging from 8 to 10 m. These differences also indicated a systematic long-wavelength variation (about 100 deg) not related to error in the Skylab orbits. Truncation of the models to degree and order 8 did not eliminate the long-wavelength variation, but in every case the rms agreement between the satellite geoids and the altimeter geoid was slightly improved. Orbits computed with the truncated models were found to be inferior to those computed with the complete models.

Marsh, J. G.↗

A report from the AVS Standards Committee - Comparison of ion gauge calibrations by several standards laboratories

Calibrations by four U.S. laboratories of four hot-cathode ion gauges, in the range 0.07-13 mPa, showed systematic differences among laboratories that were much larger than the expected error of any one calibration. They also suggested that any of the four gauges tested, if properly packaged and shipped, was able to serve as a transfer standard with probable error of 2%. A second comparison was made of the calibrations by two U.S. laboratories of some other gauges that had also been calibrated by the National Physical Laboratory, England. Results did not permit conclusive determination of whether differences were due to the laboratories or to changes in the gauges.

Warshawsky, I.↗