Crystal Structure of the LasA Virulence Factor from Pseudomonas aeruginosa: Substrate Specificity and Mechanism of M23 Metallopeptidases
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Abstract not provided
A series of lanthanide coordination polymers, {l_brace}[Dy{sub 3}(1,3-BDC){sub 4}(NO{sub 3})(phen){sub 3}]{center_dot}2H{sub 2}O{r_brace}{sub n} (1), {l_brace}[Dy{sub 2}(1,3-BDC){sub 3}(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O{r_brace}{sub n} (2), {l_brace}[Ln{sub 4}(1,3-BDC){sub 6}(DMF)(H{sub 2}O){sub 4}]{center_dot}DMF{center_dot}2H{sub 2}O{r_brace}{sub n} (Ln=Tb (3), Ho (4), Er (5), 1,3-H{sub 2}BDC=1,3-benzenedicarboxylate, phen=1,10-phenanthroline, DMF=N,N-dimethylformamide), have been synthesized and characterized. In coordination polymer 1, each Dy{sup 3+} ion is connected to its neighboring Dy{sup 3+} ion through bridging carboxyl oxygen atoms of the 1,3-BDC{sup 2-} ligands to form a new three-dimensional open-framework structure which the Schlaefli symbol of {l_brace}6{sup 4}{center_dot}8{sup 2}{r_brace}{sub 2}{l_brace}6{sup 6}{r_brace}. In coordination polymer 2, center metal dysprosium ions are interlaced and connected through bridging carboxyl oxygen atoms to form an infinite helix chain. Two helix chains are linked through the 1,3-BDC{sup 2-} ligand to give rise to the two-dimensional layered structure. Coordination polymers 3-5 are isomorphous, which displays a (3,4)-connected net with the point symbol of {l_brace}4{sup 2}{center_dot}6{sup 3}{center_dot}8{r_brace}{l_brace}4{sup 2}{center_dot}6{r_brace}. The solid-state photoluminescence properties and lifetimes of the Dy (1 and 2) and Tb (3) coordination polymers have been measured at room temperature. Highlights: Black-Right-Pointing-Pointer Five lanthanide coordination polymers based on 1,3-H{sub 2}BDC were obtained. Black-Right-Pointing-Pointer The polymers were structurally characterized by single-crystal X-ray diffraction. Black-Right-Pointing-Pointer Coordination polymers 1-5 display different topological structures. Black-Right-Pointing-Pointer They show characteristic emissions of lanthanide ions in the solid state.
The ternary phases AlT{sub 2}B{sub 2} (T=Fe, Mn, Cr) and quaternary phases AlFe{sub 2–x}Mn{sub x}B{sub 2} have been synthesized by arc-melting and characterized by powder X-ray diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All the compounds adopt the AlFe{sub 2}B{sub 2}-type structure, in which infinite zigzag chains of B atoms are connected by Fe atoms into [Fe{sub 2}B{sub 2}] slabs that alternate with layers of Al atoms along the b axis. The magnetic measurements reveal that AlFe{sub 2}B{sub 2} is a ferromagnet with T{sub C}=282 K while AlMn{sub 2}B{sub 2} and AlCr{sub 2}B{sub 2} do not show magnetic ordering in the studied temperature range of 1.8–400 K. A systematic investigation of solid solutions AlFe{sub 2−x}Mn{sub x}B{sub 2} showed a non-linear change in the structural and magnetic behavior. The ferromagnetic ordering temperature is gradually decreased as the Mn content (x) increases. The Mössbauer spectra reveal the presence of non-magnetic (NM) and ferromagnetic (FM) spectral components in all Mn-containing samples, with the amount of NM fraction increasing as the Mn content increases. While for the AlFe{sub 2−x}Mn{sub x}B{sub 2} samples with x=0.0 and 0.4 the hyperfine splitting of the FM spectral component collapses at temperatures close to the Curie temperatures determined from the magnetic measurements, for the x=1.2 and 1.6 samples the FM fraction exhibits a sizable unquenched hyperfine splitting at room temperature, a finding that is inconsistent with the observed magnetic properties. Along with the increase in the amount of the NM fraction, this observation suggests formation of Fe-rich and Mn-rich regions in the structure of the solid solutions. Quantum-chemical calculations and crystal orbital Hamilton population analysis provide a clear explanation of the distinction in properties for this series of compounds and also reveal the importance of electronic factors in modifying the magnetic properties of these materials. - Graphical abstract: We follow a gradual evolution of magnetic properties in a series of ternary borides AlT{sub 2}B{sub 2}, from non-magnetic AlCr{sub 2}B{sub 2} and AlMn{sub 2}B{sub 2} to ferromagnetic AlFe{sub 2}B{sub 2}. - Highlights: • AlT{sub 2}B{sub 2} (T=Fe, Mn, Cr) and AlFe{sub 2−x}Mn{sub x}B{sub 2} were prepared by arc‐melting. • Bulk ferromagnetism of AlFe{sub 2}B{sub 2} is gradually suppressed by the introduction of Mn. • AlMn{sub 2}B{sub 2} and AlCr{sub 2}B{sub 2} do not exhibit magnetic ordering. • Nonmagnetic (Mn‐rich) and ferromagnetic (Fe‐rich) clustering in AlFe{sub 2–x}Mn{sub x}B{sub 2}. • Ferromagnetism is suppressed due to weakening of antibonding T–T interactions.
Highlights: • XRD and HR-TEM results show the single phase nature of Co doped ZnO nanoparticles. • XMCD and dc magnetization results indicate the RT-FM in Co doped ZnO nanoparticles. • Co L{sub 3,2} NEXAFS spectra infer that Co ions are in 2+ valence state. • O K edge NEXAFS spectra show that O vacancy increases with Co doping in ZnO. - Abstract: We reported structural, magnetic and electronic structure studies of Co doped ZnO nanoparticles. Doping of Co ions in ZnO host matrix has been studied and confirmed using various methods; such as X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersed X-ray (EDX), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), near edge X-ray absorption fine structure (NEXAFS) spectroscopy, magnetic hysteresis loop measurements and X-ray magnetic circular dichroism (XMCD). From the XRD and HR-TEM results, it is observed that Co doped ZnO nanoparticles have single phase nature with wurtzite structure and exclude the possibility of secondary phase formation. FE-SEM and TEM micrographs show that pure and Co doped nanoparticles are nearly spherical in shape. O K edge NEXAFS spectra indicate that O vacancies increase with Co doping. The Co L{sub 3,2} edge NEXAFS spectra revealed that Co ions are in 2+ valence state. DC magnetization hysteresis loops and XMCD results clearly showed the intrinsic origin of temperature ferromagnetism in Co doped ZnO nanoparticles.
Sin resolvase is a site-specific serine recombinase that is normally controlled by a complex regulatory mechanism. A single mutation, Q115R, allows the enzyme to bypass the entire regulatory apparatus, such that no accessory proteins or DNA sites are required. Here, we present a 1.86 {angstrom} crystal structure of the Sin Q115R catalytic domain, in a tetrameric arrangement stabilized by an interaction between Arg115 residues on neighboring subunits. The subunits have undergone significant conformational changes from the inactive dimeric state previously reported. The structure provides a new high-resolution view of a serine recombinase active site that is apparently fully assembled, suggesting roles for the conserved active site residues. The structure also suggests how the dimer-tetramer transition is coupled to assembly of the active site. The tetramer is captured in a different rotational substate than that seen in previous hyperactive serine recombinase structures, and unbroken crossover site DNA can be readily modeled into its active sites.
Reported here are the synthesis, structural characterization, and luminescence properties of 11 novel UO 2 2+ /Ag + heterometallic complexes. Halogenated benzoic acids (2,6-dihalobenzoic acid (halo = F, Br), 3,5-dichlorobenzoic acid, and 3-halobenzoic acid (halo = Br, I)) and N-donor polycyclic ligands (2,2′-bipyridine, 2,2’;6′,2″-terpyridine, 1,10-phenanthroline, 2,2′-bipyrimidine) were employed to synthesize a set of compounds and induce structural diversity. The primary mode of coordination with the uranyl cation is hexagonal bipyramidal monomeric units with three halobenzoate ligands in the equatorial plane, though 1-D chains with pentagonal bipyramidal uranyl centers also form. The Ag + cations coordinate preferentially to the N-donor ligands and serve as counter-cations for the anionic uranyl motifs. The soft ligand character of the N-donor molecules is found to be a requirement for the inclusion of the Ag + cation into the structures. Anionic uranyl units and cationic silver units assemble via noncovalent interactions between π systems on adjacent rings and between halogens (when Br and I are present). Solid-state emission spectra display the usual uranyl band with superimposed vibronic fine structure, except for that of compound 1 , which shows emission from the 2,2′-bipyridine center. This family of compounds represents a substantial contribution to the already rich library of UO 2 2+ /Ag + compounds, and the synthetic parameters discussed within reveal a platform for the design of new heterometallic uranyl-containing materials.
The Zintl phase Ca 2 CdSb 2 was found to be dimorphic. Besides the orthorhombic Ca 2 CdSb 2 (-o), here we report on the synthesis, the structural characterization, and the thermoelectric transport properties of its monoclinic form, Ca 2 CdSb 2 (-m), and its Lu-doped variant Ca 2–x Lu x CdSb 2 (x ≈ 0.02). The monoclinic structure exhibits complex structural characteristics and constitutes a new structure type with the non-centrosymmetric space group Cm (Z = 30). The electrical resistivity ρ(T) measured on single crystals of both phases portrays a transition from a semiconductor to a degenerate p-type semiconductor upon doping with Lu and with an attendant change in the Hall carrier concentration nH from 7.15 × 10 18 to 2.30 × 10 19 cm –3 at 300 K. The Seebeck coefficient S(T) of both phases are comparable and indicate a hole-dominated carrier transport mechanism with magnitudes of 133 and 116 μV/K at 600 K for Ca 2 CdSb 2 (-m) and Ca 2–x Lu x CdSb 2 , respectively. The convoluted atomic bonding with an attendant large unit cell volume of ~4365 Å 3 drives a putative low thermal conductivity in these materials resulting in a power factor PF of 1.63 μW/cm K 2 and an estimated thermoelectric figure of merit zT of ~0.5 for Ca 2–x Lu x CdSb 2 at 600 K. Furthermore, differential scanning calorimetry results reveal the stability of these phases up to about 960 K, making them candidates for moderate temperature thermoelectric materials.
A family of triheme cytochromes from Geobacter sulfurreducens plays an important role in extracellular electron transfer. In addition to their role in electron transfer pathways, two members of this family (PpcA and PpcD) were also found to be able to couple e(-)/H+ transfer through the redox Bohr effect observed in the physiological pH range, a feature not observed for cytochromes PpcB and PpcE. In attempting to understand the molecular control of the redox Bohr effect in this family of cytochromes, which is highly homologous both in amino acid sequence and structures, it was observed that residue 6 is a conserved leucine in PpcA and PpcD, whereas in the other two characterized members (PpcB and PpcE) the equivalent residue is a phenylalanine. To determine the role of this residue located close to the redox Bohr center, we replaced Leu(6) in PpcA with Phe and determined the redox properties of the mutant, as well as its solution structure in the fully reduced state. In contrast with the native form, the mutant PpcAL6F is not able to couple the e(-)/H+ pathway. We carried out the reverse mutation in PpcB and PpcE (i.e., replacing Phe(6) in these two proteins by leucine) and the mutated proteins showed an increased redox Bohr effect. The results clearly establish the role of residue 6 in the control of the redox Bohr effect in this family of cytochromes, a feature that could enable the rational design of G. sulfurreducens strains that carry mutant cytochromes with an optimal redox Bohr effect that would be suitable for various biotechnological applications.
Not provided.
Abstract not provided
Oxide–water interfaces are ubiquitous, with many applications in industry and the environment, yet there is a great deal of controversy over their properties and microscopic structure. This controversy stems, in part, from the unique H-bond networks formed at different surface terminations and mineral compositions. Density functional theory simulations of these interfaces require an accurate description of both the oxide mineral and water in diverse H-bond environments. Thus, herein we simulate the Al 2 O 3 (001)–H 2 O interface using the PBE, PBE-TS, RPBE, SCAN, and HSE06-TS functionals to determine how calculated interfacial properties depend on the choice of functional. We find that the structure of the first few layers of water at the surface is determined by electron correlation in a way that cannot be approximated using semiemipirical van der Waals corrections. Of the functionals investigated, we find that SCAN yields the most accurate interfacial structure, dynamics, and sum frequency generation spectrum. Furthermore, SCAN leads to a reduction in the order of the 2D H-bond network of water at the alumina surface predicted by GGA functionals, leading to a significant decrease in the anisotropy of the diffusion coefficient at the surface. We emphasize the importance of using a functional which accurately describes electron correlation for more complex oxides, such as transition-metal oxides, where electron correlation may play an even greater role in determining the structure and dynamics of the oxide–water interface.
The information content in 1-D solution X-ray scattering profiles is generally restricted to low-resolution shape and size information that, on its own, cannot lead to unique 3-D structures of biological macromolecules comparable to all-atom models derived from X-ray crystallography or NMR spectroscopy. Here we show that contrast-matched X-ray scattering data collected on a protein incorporating specific heavy-atom labels in 65% aqueous sucrose buffer can dramatically enhance the power of conventional small- and wide-angle X-ray scattering (SAXS/WAXS) measurements. Under contrast-matching conditions the protein is effectively invisible and the main contribution to the X-ray scattering intensity arises from the heavy atoms, allowing direct extraction of pairwise distances between them. In combination with conventional aqueous SAXS/WAXS data, supplemented by NMR-derived residual dipolar couplings (RDCs) measured in a weakly aligning medium, we show that it is possible to position protein domains relative to one another within a precision of 1 Å. We demonstrate this approach with respect to the determination of domain positions in a complex between calmodulin, in which the four Ca 2+ ions have been substituted by Pb 2+ , and a target peptide. The uniqueness of the resulting solution is established by an exhaustive search over all models compatible with the experimental data, and could not have been achieved using aqueous SAXS and RDC data alone. Moreover, we show that the correct structural solution can be recovered using only contrast-matched SAXS and aqueous SAXS/WAXS data.
Liquids and solids are two fundamental states of matter. However, our understanding of their three-dimensional atomic structure is mostly based on physical models. Here we use atomic electron tomography to experimentally determine the three-dimensional atomic positions of monatomic amorphous solids, namely a Ta thin film and two Pd nanoparticles. We observe that pentagonal bipyramids are the most abundant atomic motifs in these amorphous materials. Instead of forming icosahedra, the majority of pentagonal bipyramids arrange into pentagonal bipyramid networks with medium-range order. Molecular dynamics simulations further reveal that pentagonal bipyramid networks are prevalent in monatomic metallic liquids, which rapidly grow in size and form more icosahedra during the quench from the liquid to the glass state. Furthermore, these results expand our understanding of the atomic structures of amorphous solids and will encourage future studies on amorphous–crystalline phase and glass transitions in non-crystalline materials with three-dimensional atomic resolution.
During evening rush hour traffic on August 1, 2007, the major interstate highway bridge carrying I35W over the Mississippi River in Minneapolis catastrophically failed, tragically taking the lives of thirteen people and injuring many more. The steel truss bridge, constructed in 1967, was undergoing deck reconstruction during the collapse, and was estimated to carry more than 140,000 vehicles daily. This tragedy generated great interest in employment of structural health monitoring systems. The I35W St. Anthony Falls Bridge, a post-tensioned concrete box bridge constructed to replace the collapsed steel truss bridge, contains over 500 instruments to monitor the structural behavior. Numerical models of the bridge are being developed and calibrated to the collected data obtained from truck load tests and thermal effects. The data obtained over the first few years of monitoring are being correlated with the calibrated models and used to develop the baseline bridge behavior. This information is being used to develop a system to monitor and interpret the long-term behavior of the bridge. This paper describes the instrumentation, preliminary results from the data and model calibration, the plan for developing long-term monitoring capabilities, and the challenges associated with structural health monitoring of bridge systems. In addition, opportunities and directions for future research required to fully realize the objectives of structural health monitoring are described.
Besides of their well-known wide range of properties it was recently shown that many of the heavy Heusler semiconductors with 1:1:1 composition and C1{sub b} structure exhibit a zero band gap behavior and are topological insulators induced by their inverted band structure. In the present study, the electronic structure of the Heusler compounds PtYSb and PtLaBi was investigated by bulk sensitive hard x-ray photoelectron spectroscopy. The measured valence band spectra are clearly resolved and in well agreement to the first-principles calculations of the electronic structure of the compounds. The experimental results give clear evidence for the zero band gap state.
Unlike the proton, whose parton distributions have been extracted using abundant data, the pion has been relatively ignored. The pion, nevertheless, is a crucial part of the current understanding of the nucleon's parton distributions and of the binding of the nucleon into a nucleus. The pion's structure becomes more intriguing when its dual roles as a light quark-antiquark system and as QCD's Goldstone boson are considered. One source of data on the pion's structure is pion-induced Drell-Yan scattering. Two recent re-analyses of such data are discussed here.