Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Secondary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Photochemical Aging Alters Secondary Organic Aerosol Partitioning Behavior

Organic aerosol is the largest fraction of the atmospheric non-refractory aerosol mass and has a significant impact on climate, visibility, and human health. A significant portion of organic aerosol is secondary organic aerosol (SOA), which forms when volatile organic compounds (VOCs) are oxidized and the reaction products partition to the particle phase. SOA formation and aging have been described using semi-volatile partitioning theory, and a typical assumption invoked is that gas-particle partitioning rapidly reaches equilibrium. However, several studies have called into question whether traditional equilibrium assumptions are valid, either due to particle-phase diffusion limitations, particle-phase reactions, or liquid/liquid phase separation and immiscibility of organic phases. Here, we investigate the ability of partitioning theory to describe laboratory SOA formation experiments using SOA mass and yield as the evaluation metric. We conduct two types of experiments; co-condensation experiments in which isoprene and a-pinene are simultaneously oxidized to form SOA, and sequential condensation experiments in which fresh isoprene SOA is exposed to aged, pre-existing isoprene- or a-pinene-derived SOA particles. In the co-condensation experiments, partitioning theory successfully predicted the time-dependent SOA concentrations without invoking diffusion limitations or organic phase separation. However, in the sequential condensation experiments, yield analysis showed that fresh isoprene SOA did not partition into either the aged a-pinene or aged isoprene SOA particles over the 4 hour experimental timescale, even at relative humidity as high as 85%. This study shows that common assumptions regarding SOA gas-particle partitioning are accurate for fresh SOA, but that these assumptions break down after SOA has been photochemically aged for modest amounts of time (~1 day). These results have important consequences for modeling SOA formation and may help to resolve some seemingly divergent conclusions regarding diffusion limitations that exist in the literature.

Secondary Organic Aerosol (SOA), gas/particle part↗

Distinct Gas-Particle Partitioning and Viscosity Characteristics of Secondary Organic Aerosols Derived from α-Pinene versus Ocimene

Secondary organic aerosols (SOA) have complex, multicomponent composition that controls particle viscosity and gas-particle partitioning, key factors to their atmospheric evolution. This study investigates the chemical composition, volatility and viscosity of SOA formed by ozonolysis of cyclic α-pinene (PSOA) and acyclic ocimene (OSOA) monoterpenes. Using Temperature-Programmed Desorption combined with Direct Analysis in Real-Time ionization and High-Resolution Mass Spectrometry, we determined the molecular composition and saturation mass concentration of individual SOA constituents. These data enabled gas-particle partitioning and viscosity estimates under varied atmospheric conditions. PSOA, composed of higher molecular weight and less oxidized species, shows higher condensability and viscosity under high total organic mass (tOM) loadings. Here, in contrast, OSOA, consisting of more oxidized, lower molecular weight species, exhibits greater sensitivity to tOM, with viscosity increasing significantly upon dilution. Poke-flow experiments support this trend, indicating that OSOA undergoes more dynamic compositional and phase changes during atmospheric aging. These observations reveal distinct dynamic trends in the atmospheric transformations and reactivity of SOA from cyclic and acyclic monoterpenes, with the latter showing greater compositional changes during aging that alter viscosity and diffusion. This highlights the importance of incorporating such dynamic transformations into atmospheric models to improve predictions of SOA atmospheric loadings, lifetimes, and impacts.

cyclic and acyclic monoterpenes↗

Secondary Organic Aerosol from OH Oxidation of Acyclic Terpenes Is More Viscous and Less Volatile than That of Their Cyclic Analogs

Biogenic volatile organic compounds (BVOCs), a dominant source of secondary organic aerosol (SOA) globally, exhibit emission rates and composition that are plant species-specific and vary with environmental stressors. A common outcome of plant stress is increased emissions of acyclic terpenes. The paucity of information about acyclic terpene SOA chemistry contributes to uncertainties in predictions of SOA global loadings and impacts on Earth’s radiative budget, particularly in a changing climate where acyclic terpene emissions could become more prominent. This study compared properties of SOA derived from OH oxidation of acyclic and cyclic monoterpenes (ß-ocimene, a-pinene) and sesquiterpenes (ß-farnesene, ß-caryophyllene). Single particle mass spectrometry was used for assessing shape, density, and evaporation kinetics of size-selected SOA particles, and nanospray desorption electrospray ionization high-resolution mass spectrometry (nano-DESI-HRMS) was used to measure molecular composition of SOA. Acyclic terpene SOA exhibited higher viscosity and lower volatility compared to cyclic terpene SOA, and had a greater volume fraction remaining (VFR) after ~24 hours of evaporation - approximately 1.3-1.6 times higher VFR than that of cyclic terpene SOA. Additionally, HRMS analysis revealed greater chemical diversity and higher fractions of extremely low volatility compounds (56-62% ELVOC/LVOC) in acyclic terpene SOA compared to cyclic counterparts (25-37% ELVOC/LVOC). Our findings highlight the potential importance of accounting for acyclic terpene aerosol chemistry under conditions of plant stress to improve predictions of SOA loadings and impacts.

SOA physical properties↗

Synergy between Secondary Organic Aerosols and Long Range Transport of Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) known for their harmful health effects undergo long-range transport (LRT) when adsorbed on and/or absorbed in atmospheric particles. The association between atmospheric particles, PAHs, and their LRT has been the subject of many studies, yet remains poorly understood. Current models assume PAHs instantaneously attain reversible gas-particle equilibrium. In this paradigm, during LRT, as gas-phase PAHs concentrations are depleted due to oxidation and dilution, particle-bound PAHs rapidly evaporate to re-establish equilibrium, leading to severe underpredictions of LRT potential of particle-bound PAHs. Here we present a new, experimentally based picture, in which the PAHs become trapped inside highly viscous quasi-solid secondary organic aerosol (SOA) particles during particle formation, and thus prevented from evaporation, and shielded from oxidation. In contrast, surface-adsorbed PAHs rapidly evaporate, leaving no trace behind. We find synergetic effects between PAHs and SOA, in that the presence of PAHs inside SOA particles drastically slows SOA evaporation to the point that it can be ignored, and the highly viscous SOA prevents PAHs evaporation assuring efficient LRT. The data show that the assumptions of instantaneous reversible gas-particle equilibrium for PAHs and for SOA are fundamentally flawed, providing explanation for the persistent discrepancy between observed and predicted particle-bound PAHs.

Environmental Molecular Sciences Laboratory↗

Inhibition Effect of Secondary Phosphate Mineral Precipitation on Uranium Release from Contaminated Sediments

The inhibitory effect of phosphate mineral precipitation on uranium release was evaluated using a U(VI)-contaminated sediment collected from the US Department of Energy (DOE) Hanford site. The sediment contained U(VI) that was associated with diffusion-limited intragrain regions within its mm-size granitic lithic fragments. The sediment was first treated to promote phosphate mineral precipitation in batch suspensions spiked with 1 and 50 mM aqueous phosphate, and calcium in a stoichiometric ratio of mineral hydroxyapatite. The phosphate-treated sediment was then leached to solubilize contaminant U(VI) in a column system using a synthetic groundwater that contained chemical components representative of Hanford groundwater. Phosphate treatment significantly decreased the extent of U(VI) release from the sediment. Within the experimental duration of about 200 pore volumes, the effluent U(VI) concentrations were consistently lower by over one and two orders of magnitude after the sediment was treated with 1 and 50 mM of phosphate, respectively. Measurements of solid phase U(VI) using various spectroscopes and chemical extraction of the sediment collectively indicated that the inhibition of U(VI) release from the sediment was caused by: 1) U(VI) adsorption to the secondary phosphate precipitates and 2) the transformation of initially present U(VI) mineral phases to less soluble forms.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Application of an Efficient Gene Targeting System Linking Secondary Metabolites to their Biosynthetic Genes in Aspergillus terreus

Nonribosomal peptides (NRPs) are natural products biosynthesized by NRP synthetases. A kusA-, pyrG- mutant strain of Aspergillusterreus NIH 2624 was developed that greatly facilitated the gene targeting efficiency in this organism. Application of this tool allowed us to link four major types of NRP related secondary metabolites to their responsible genes in A. terreus. In addition, an NRP related melanin synthetase was also identified in this species.

Aspergillus terreus, Nonribosomal peptide synthase↗

Correlation of Secondary Organic Aerosol with Odd Oxygen in Mexico City

Data collected from a mountain location within the Mexico City limits are used to demonstrate a correlation between secondary organic aerosol and odd-oxygen (O3 + NO2). Positive matrix factorization techniques are employed to separate organic aerosol components: hydrocarbon-like organic aerosol; oxidized-organic aerosol; and biomass burning organic aerosol. The measured hydrocarbon-like organic aerosol is correlated with urban CO (8±1) µg m-3 ppmv-1. The measured oxidized-organic aerosol is associated with photochemical oxidation products and correlates with odd-oxygen with an apparent slope of (70-120) µg m-3 ppmv-1. The dependence of the oxidized-organic aerosol to odd-oxygen correlation on the nature of the gas-phase hydrocarbon profile is discussed.

09 BIOMASS FUELS↗

Temperature- and Humidity-Dependent Phase States of Secondary Organic Aerosols

Viscosity of monoterpene-derived secondary organic aerosols (SOAs) as a function of temperature and relative humidity (RH), and dry SOA glass transition temperatures are reported. Viscosity was measured using coalescence time scales of synthesized 100 nm dimers. Dry temperature-dependent SOA viscosity was similar to that of citric acid, coal tar pitch, and sorbitol. The temperature where dry viscosity was 10 6 Pa·s varied between 14 and 36;°C and extrapolated glass transition varied between -10 and 20 °C (±10 °C). Mass fragment f 44 obtained with an Aerosol Chemical Speciation Monitor was anticorrelated with viscosity. Viscosity of humidified Δ 3 -carene and α-pinene SOAs exceeded 10 6 Pa·s for all subsaturated RHs at temperatures <0 and –5 °C, respectively. Steep viscosity isopleths at 10 6 Pa·s were traced for these across (temperature, RH) conditions ranging from (approximately -5 °C, 100%) and (approximately 36 °C, 0%). Finally, differences in composition and thus hygroscopicity can shift humidified viscosity isopleths for SOAs at cold tropospheric temperatures.

58 GEOSCIENCES↗

Production of Secondary Organic Aerosol During Aging of Biomass Burning Smoke From Fresh Fuels and Its Relationship to VOC Precursors

After smoke from burning biomass is emitted into the atmosphere, chemical and physical processes change the composition and amount of organic aerosol present in the aged, diluted plume. During the fourth Fire Lab at Missoula Experiment, we performed smog-chamber experiments to investigate formation of secondary organic aerosol (SOA) and multiphase oxidation of primary organic aerosol (POA). We simulated atmospheric aging of diluted smoke from a variety of biomass fuels while measuring particle composition using high-resolution aerosol mass spectrometry. We quantified SOA formation using a tracer ion for low-volatility POA as a reference standard (akin to a naturally occurring internal standard). We report these smoke aging experiments revealed variable organic aerosol (OA) enhancements, even for smoke from similar fuels and aging mechanisms. This variable OA enhancement correlated well with measured differences in the amounts of emitted volatile organic compounds (VOCs) that could subsequently be oxidized to form SOA. For some aging experiments, we were able to predict the SOA production to within a factor of 2 using a fuel-specific VOC emission inventory that was scaled by burn-specific toluene measurements. For fires of coniferous fuels that were dominated by needle burning, volatile biogenic compounds were the dominant precursor class. For wiregrass fires, furans were the dominant SOA precursors. We used a POA tracer ion to calculate the amount of mass lost due to gas-phase oxidation and subsequent volatilization of semivolatile POA. Less than 5% of the POA mass was lost via multiphase oxidation-driven evaporation during up to 2 hr of equivalent atmospheric oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Role of Secondary Ice Processes in Midlatitude Continental Clouds

Clouds contribute very large uncertainties to our understanding of Earth's climate system. This is partly attributed to the insufficient predictive abilities of ice formation processes in clouds and the ramifications for the hydrological cycle and climate. To improve predictions of ice particle concentrations in clouds, a better understanding of the relative contributions of ice nucleating particles and secondary ice processes (SIPs) is needed. To address this challenging question, we combine ice nucleation measurements via immersion freezing of particles filtered from rainwater, with satellite-retrieved cloud top glaciation temperatures of the same clouds, while considering the chemical composition of the rainwater, the particles, and the particles' mass loads. In addition, laboratory-derived ice nucleation parameterization of K-feldspar was implemented in an ice nucleation model in order to reconstruct cloud glaciation temperatures considering primary ice nucleation only. Our laboratory and modeling results suggest that SIPs play a major role in glaciating the investigated clouds system. Furthermore, we show that SIP is controlled by cloud droplet sizes. In summary, our results suggest that the effect of SIP on cloud glaciation temperatures and therefore on Earth's radiation budget, may be significant.

54 ENVIRONMENTAL SCIENCES↗

Evidence for Secondary Ice Production in Southern Ocean Maritime Boundary Layer Clouds

Abstract Maritime boundary‐layer clouds over the Southern Ocean (SO) have a large shortwave radiative effect. Yet, climate models have difficulties in representing these clouds and, especially, their phase in this observationally sparse region. This study aims to increase the knowledge of SO cloud phase by presenting in‐situ cloud microphysical observations from the Southern Ocean Clouds, Radiation, Aerosol, Transport Experimental Study (SOCRATES). We investigate the occurrence of ice in summertime marine stratocumulus and cumulus clouds in the temperature range between 6 and −25°C. Our observations show that in ice‐containing clouds, maximum ice number concentrations of up to several hundreds per liter were found. The observed ice crystal concentrations were on average one to two orders of magnitude higher than the simultaneously measured ice nucleating particle (INP) concentrations in the temperature range below −10°C and up to five orders of magnitude higher than estimated INP concentrations in the temperature range above −10°C. These results highlight the importance of secondary ice production (SIP) in SO summertime marine boundary‐layer clouds. Evidence for rime splintering was found in the Hallett‐Mossop (HM) temperature range but the exact SIP mechanism active at lower temperatures remains unclear. Finally, instrument simulators were used to assess simulated co‐located cloud ice concentrations and the role of modeled HM rime‐splintering. We found that CAM6 is deficient in simulating number concentrations across the HM temperature range with little sensitivity to the model HM process, which is inconsistent with the aforementioned observational evidence of highly active SIP processes in SO low‐level clouds.

54 ENVIRONMENTAL SCIENCES↗

New positive feedback mechanism between boundary layer meteorology and secondary aerosol formation during severe haze events

Severe haze events during which particulate matter (PM) increases quickly from tens to hundreds of microgram per cubic meter in 1-2 days frequently occur in China. Although it has been known that PM is influenced by complex interplays among emissions, meteorology, and physical and chemical processes, specific mechanisms remain elusive. In this paper, a new positive feedback mechanism between planetary boundary layer (PBL), relative humidity (RH), and secondary PM (SPM) formation is proposed based on a comprehensive field experiment and model simulation. The decreased PBL associated with increased PM increases RH by weakening the vertical transport of water vapor; the increased RH in turn enhances the SPM formation through heterogeneous aqueous reactions, which further enhances PM, weakens solar radiation, and decreases PBL height. This positive feedback, together with the PM-Radiation-PBL feedback, constitutes a key mechanism that links PM, radiation, PBL properties (e.g. PBL height and RH), and SPM formation, This mechanism is self-amplifying, leading to faster PM production, accumulation, and more severe haze pollution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The properties and behavior of α-pinene secondary organic aerosol particles exposed to ammonia under dry conditions

Chemical transformations and aging of secondary organic aerosol (SOA) particles can alter their physical and chemical properties, including particle morphology. Ammonia, one of the common atmospheric reactive constituents, can react with SOA particles, changing their properties and behavior. At low relative humidity NH3 uptake by α-pinene SOA particles appears to be limited to the particle surface, which suggests that the reacted particles might not be homogeneous and have complex morphology. Here, we present a study aimed at detailed characterization of the effect of ammonia on the composition, density, morphology, shape, and evaporation kinetics of α-pinene SOA particles. We find that a small amount of NH3 diffuses and reacts throughout the particles bulk, while most of the ammoniated products result from the reaction of NH3 with carboxylic acids on the particle surface, leading to a slight increase in particle size. We show that the reaction products form a solid semi-volatile coating that is a few nanometers thick. This solid coating prevents coagulating particles from coalescing for over two days. However, when the gas phase is diluted this semi-volatile coating evaporates in minutes, which is ensued by rapid coalescence. The ammoniated products in the particle bulk affect particles evaporation kinetics, more so for the smaller particles that contain higher fraction of ammoniated products.

ammonia exposure↗

Hard-to-soft transition-enhanced piezoelectricity in poly(vinylidene fluoride) via relaxor-like secondary crystals activated by high-power ultrasonication

We report although high piezoelectric coefficients have recently been observed in poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)] random copolymers, they have low Curie temperatures, which makes their piezoelectricity thermally unstable. It has been challenging to achieve high piezoelectric performance from the more thermally stable PVDF homopolymer. In this report, we describe how high-power ultrasonic processing was used to induce a hard-to-soft piezoelectric transition and improve the piezoelectric coefficient d 31 in neat PVDF. After high-power ultrasonication for 20 min, a uniaxially stretched and poled PVDF film exhibited a high d 31 of 50.2 ± 1.7 pm V -1 at room temperature. Upon heating to 65 °C, the d 31 increased to a maximum value of 76.2 ± 1.2 pm V -1 , and the high piezoelectric performance persisted up to 110 °C. The enhanced piezoelectricity was attributed to the relaxor-like secondary crystals in the oriented amorphous fraction, broken off from the primary crystals by ultrasonication, as suggested by differential scanning calorimetry and broadband dielectric spectroscopy studies.

relaxor-like secondary crystals↗

Influence of the Electric Field on Secondary Electron Emission Yield

We have applied a technique based on levitation of a single charged grain in the quadrupole. We have used 3-6 micrometer spherical grains from amorphous carbon. These grains were charged by an electron beam with the energy tunable up to 10 keV and the grain charge was continuously monitored. If the grain is charged by an constant energy, its surface potential is set to the value when incident electrons are slow down to the energy where the secondary emission yield is equal to unity. Our investigations reveal that this energy changes proportionally to the grain surface field. Moreover, we have observed a shift of charging characteristics after a long-time electron bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inelastic Transmission Of Electrons Through A Single Macro-Glass Capillary And Secondary Electron Emission

The transmission of electrons with incident energies 300-1000 eV through single glass capillary samples of macroscopic dimensions has been investigated. The transmitted spectra for all energies indicate dominance of inelastic electrons as the tilt angle {psi} increases, with the ratio of inelastically to elastically transmitted intensity for tilt angles >2.5 deg. (the indirect region of transmission) reaching a constant value of about 2:1. When the secondary electron emission was analyzed, higher yield was observed with decreasing primary beam energy and with increasing sample tilt angle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A theoretical approach to electric breakdown behaviour and effective secondary emission coefficient in gas discharge process between two parallel-plane disk electrodes

The gas discharge characteristics are seriously influenced by the effective secondary electron-emission coefficient ({gamma}{sub eff}) originally defined by Townsend. A theoretical approach has been proposed for the determination of variation of this coefficient as a function of the geometrical parameter d/R (the ratio of inter-electrode distance to electrode radius) in the most practical range of 0.08{<=}d/R{<=}1.90. Two geometrical factors g{sub i} and g{sub p}, which are attributed to ion-induced and photon-induced terms, respectively, were introduced to the effective gamma in parallel-plane arrangement. The factors were theoretically derived and hence the effective gamma and the breakdown voltage for a specified geometrical parameter, such as d/R=0.16, were obtained. Then, the effective gamma and the Paschen curves for various geometrical parameters such as d/R=0.32, 0.63, 1.27, and 1.90 were theoretically reproduced. The obtained results showed quite a good agreement with those reported by other researchers and verified that the proposed g{sub i} and g{sub p} have properly been introduced and derived.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗