Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scaling Studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

The Study of Clusters of Galaxies and Large Scale Structures

The work on the ROSAT Deep Survey has been successfully completed. A number of interesting results have been established within this joint MPE, Cal Tech, JHU, ST Scl, ESO collaboration. First, a very large fraction, 70-80 percent, of the X-ray background has been directly resolved into point sources. We have derived a new log N-log S for X- ray sources and have measured a source density of 970 sources per square degree at a limiting flux level of 10(exp -15)/erg s sq cm (0.5-2.0 keV). Care was taken in these studies to accurately model and measure the effects of sources confusion. This was possible because of our observing strategy which included both deep PSPC and HRI observations. In the last year we initiated work in the design and development of the Next Generation Space Telescope.

Source record↗

Uniformly-valid asymptotic solutions to the Orr-Sommerfeld equation using multiple scales

The Orr-Sommerfeld equation is studied using the method of multiple scales. The leading-order uniformly-valid asymptotic solutions are obtained without recourse to heuristic methods for two different types of velocity profiles. Solutions were obtained for arbitrary velocity profiles without inflection or critical points and for profiles with simultaneous inflection and critical points. These are shown to reproduce previously obtained solutions in the inner and outer regions.

Long, Lyle N.↗

Voids in the Ly-alpha forest

The general issue of using the Ly-alpha absorbers in quasar spectra as tracers of the large-scale matter distribution is discussed, emphasizing complications due to evolutionary effects and line blending. Then, a novel method of statistical analysis of the line data appropriate for studying large-scale structure is described. This method circumvents the problem of line blending by truncating the interval distribution at the low end. It also explicitly takes z-dependent effects into account. As an example, the method is applied to an 18-quasar spectrum sample of 417 lines.

Duncan, Robert C.↗

The Study of Clusters of Galaxies and Large Scale Structures

Many research projects have been initiated and completed under support of this program. The results are summarized below. The work on the ROSAT Deep Survey has been successfully completed. A number of interesting results have been established within this joint MPE, Cal Tech, JHU, ST ScI, ESO collaboration. First, a very large fraction, 70-80 percent, of the X-ray background has been directly resolved into point sources. We have derived a new log N-log S for X-ray sources and have measured a source density of 970 sources per square degree at a limiting flux level. Care was taken in these studies to accurately model and measure the effects of sources confusion. This was possible because of our observing strategy which included both deep PSPC and HRI observations. No evidence of a population of narrow emission line galaxies has been established but some evidence for the evolution of low luminosity AGN (Seyfert galaxies) has been reported. The work on the ROSAT All Sky Survey Northern Cluster Survey has been substantially concluded but the publication of the list has been held up by the need to analyze newly re-calibrated data. This should result in publication over the next year. During the past year we have submitted a paper to the Astrophysical Journal which utilized a sample of clusters originally selected from the ROSAT All-sky survey at redshifts greater than 0.3. This sample was studied with ASCA to determine temperature and luminosity.

Source record↗

The narrow pulse approximation and long length scale determination in xenon gas diffusion NMR studies of model porous media

We report a systematic study of xenon gas diffusion NMR in simple model porous media, random packs of mono-sized glass beads, and focus on three specific areas peculiar to gas-phase diffusion. These topics are: (i) diffusion of spins on the order of the pore dimensions during the application of the diffusion encoding gradient pulses in a PGSE experiment (breakdown of the narrow pulse approximation and imperfect background gradient cancellation), (ii) the ability to derive long length scale structural information, and (iii) effects of finite sample size. We find that the time-dependent diffusion coefficient, D(t), of the imbibed xenon gas at short diffusion times in small beads is significantly affected by the gas pressure. In particular, as expected, we find smaller deviations between measured D(t) and theoretical predictions as the gas pressure is increased, resulting from reduced diffusion during the application of the gradient pulse. The deviations are then completely removed when water D(t) is observed in the same samples. The use of gas also allows us to probe D(t) over a wide range of length scales and observe the long time asymptotic limit which is proportional to the inverse tortuosity of the sample, as well as the diffusion distance where this limit takes effect (approximately 1-1.5 bead diameters). The Pade approximation can be used as a reference for expected xenon D(t) data between the short and the long time limits, allowing us to explore deviations from the expected behavior at intermediate times as a result of finite sample size effects. Finally, the application of the Pade interpolation between the long and the short time asymptotic limits yields a fitted length scale (the Pade length), which is found to be approximately 0.13b for all bead packs, where b is the bead diameter. c. 2002 Elsevier Sciences (USA).

NASA Discipline Life Sciences Technologies↗

Ducted Fuel Injection And Cooled Spray Technologies For Particulate Control In Heavy-duty Diesel Engines (Final Report)

Cooled Spray (CS) and Ducted Fuel Injection (DFI) are in-cylinder technologies for diesel engines that can reduce particulate matter and soot emissions and data has been published showing that these technologies can reduce soot emissions by 75-100% for some engines at some operating conditions. However, little is known about scaling the devices for engine size. Additionally, the performance of either technology over the engine duty cycle has not been explored. This project addresses both of these points through single-cylinder engine investigations. The objectives of this project are to provide details about dimensional scaling of these devices and to demonstrate 75% PM reduction over a range of operating conditions on a single-cylinder engine. Two engines were used for this project: a 125mm bore optically accessible engine at Sandia National Laboratories and a 168mm bore metal engine at Southwest Research Institute. The optical engine was used to study the performance of DFI and CS inserts for a large injector orifice diameter injector that is characteristic of a locomotive engine and to perform scaling studies for DFI. The metal engine was used to perform scaling and alignment studies for CS and to evaluate the technology for both EGR and non-EGR engines over the engine operating map. Modifications were required for both engines to accept the prototype inserts being tested. The optical engine required a new fuel injector, cylinder head and piston so that tests could be run at the pressures and engine speeds required. Additionally, a novel rotating stage was designed for the optical engine to simplify alignment of the modules. The metal engine required a modified cylinder head to accept CS inserts and a modified piston to provide additional space around the fuel injector for the CS inserts. Tests on the optical engine showed that DFI reduces PM emissions for both small injector orifices (0.170mm diameter) and large injector orifices (0.290mm). For high load testing, the DFI modules were not as effective as at low load testing, but it was acknowledged that minimal geometric optimization was performed and more improvements may be possible. Comparing DFI to CS and conventional diesel combustion (CDC), DFI performed better than CS or CDC. The CS geometries used in these studies may not be ideal for that engine and additional modifications likely would improve performance. Tests on the metal engine showed PM reductions as high has 80% at some operating conditions with duty-cycle PM reductions of ~50% for EGR and non-EGR configurations. The CS testing on the metal engine showed that chamfering of the fuel passage inlet either through hydro-erosion or mechanical grinding provided significant improvements in the PM reduction capabilities of the insert. Additionally, alignment sensitivities were explored and the data show that the tolerance to misalignment is approximately 0.05 to 0.1mm for the inserts that were studied here. Air-fuel ratio was shown to be important in the effectiveness of the CS inserts. In several tests, it was shown that the CS inserts are more effective at reducing the PM for high-AFR operating conditions compared to low AFR conditions. In summary, multiple designs were evaluated on both engines. It was found that for the conditions and configurations studied here, a fuel passage diameter of ~2.5mm performed best overall. Significant duty-cycle PM reductions are possible using these technologies and sensitivities to AFR, alignment fuel passage diameter and inlet fuel passage shaping were explored and are reported here. More PM reduction may be possible with improved geometric design and attention to alignment practices.

02 PETROLEUM↗

Mechanisms of Dynamic Near-Wake Modulation of a Utility-Scale Wind Turbine

The current study uses large eddy simulations to investigate the transient response of a utility-scale wind turbine wake to dynamic changes in atmospheric and operational conditions, as observed in previous field-scale measurements. Most wind turbine wake investigations assume quasi-steady conditions, but real wind turbines operate in a highly stochastic atmosphere, and their operation (e.g. blade pitch, yaw angle) changes constantly in response. Furthermore, dynamic control strategies have been recently proposed to optimize wind farm power generation and longevity. Therefore, improved understanding of dynamic wake behaviours is essential. First, changes in blade pitch are investigated and the wake expansion response is found to display hysteresis as a result of flow inertia. The time scales of the wake response to different pitch rates are quantified. Next, changes in wind direction with different time scales are explored. Under short time scales, the wake deflection is in the opposite direction of that observed under quasi-steady conditions. Finally, yaw changes are implemented at different rates, and the maximum inverse wake deflection and time scale are quantified, showing a clear dependence on yaw rate. To gain further physical understanding of the mechanism behind the inverse wake deflection, the streamwise vorticity in different parts of the wake is quantified. The results of this study provide guidance for the design of advanced wake flow control algorithms. The lag in wake response observed for both blade pitch and yaw changes shows that proposed dynamic control strategies must implement turbine operational changes with a time scale of the order of the rotor time scale or slower.

flow-structure interactions↗

Time and space spectra of earth-emitted radiation at large scales

Several earth radiation instruments have been flown on spacecraft. The most recent of these instruments has been the Earth Radiation Budget (ERB) instrument aboard the Nimbus 6 and Nimbus 7 spacecraft. The ERB instrument includes two earth-viewing wide-field-of-view (WFOV) radiometers one of which measures total irradiance and the other measures shortwave (SW) irradiances. he difference between the two irradiances is the longwave (LW) or earth-emitted irradiance. The ERB instrument has been providing WFOV measurements since July 1975. These WFOV data are suitable for studying large-scale processes over spatial scales of thousands of kilometers. The present investigation is concerned with a study of the annual cycle of the distribution of the earth's LW radiation. This study is based on one year of WFOV data, from July 1975 through June 1976. The present investigation is an extension of the study by Bess and Smith (1979).

Bess, T. D.↗

Groundwater sapping valleys: Experimental studies, geological controls and implications to the interpretation of valley networks on Mars

An integrated approach using experimental laboratory models, field studies of terrestrial analogs, and remote studies of terrestrial field sites were applied to the goals of understanding the nature and morphology of valley networks formed by groundwater sapping. In spite of problems with scaling, the experimental studies provide valuable insights into concepts relating to the initiation, development, and evolution of valleys by groundwater sapping. These investigations are also aimed at developing geomorphic criteria for distinguishing valleys formed by surface runoff from those formed by groundwater sapping processes. Channels that were field classified as sapping vs. runoff were successfully distinguished using statistical analysis of their respective morphologies; therefore, it may be possible to use similar techniques to interpret channel genesis on Mars. The terrestrial and flume studies provide the ground truth dataset which can be used (and will be during the present year) to help interpret the genesis of valley networks on Mars.

Kochel, R. Craig↗

Large Scale Variability of Phytoplankton Blooms in the Arctic and Peripheral Seas: Relationships with Sea Ice, Temperature, Clouds, and Wind

Spatially detailed satellite data of mean color, sea ice concentration, surface temperature, clouds, and wind have been analyzed to quantify and study the large scale regional and temporal variability of phytoplankton blooms in the Arctic and peripheral seas from 1998 to 2002. In the Arctic basin, phytoplankton chlorophyll displays a large symmetry with the Eastern Arctic having about fivefold higher concentrations than those of the Western Arctic. Large monthly and yearly variability is also observed in the peripheral seas with the largest blooms occurring in the Bering Sea, Sea of Okhotsk, and the Barents Sea during spring. There is large interannual and seasonal variability in biomass with average chlorophyll concentrations in 2002 and 2001 being higher than earlier years in spring and summer. The seasonality in the latitudinal distribution of blooms is also very different such that the North Atlantic is usually most expansive in spring while the North Pacific is more extensive in autumn. Environmental factors that influence phytoplankton growth were examined, and results show relatively high negative correlation with sea ice retreat and strong positive correlation with temperature in early spring. Plankton growth, as indicated by biomass accumulation, in the Arctic and subarctic increases up to a threshold surface temperature of about 276-277 degree K (3-4 degree C) beyond which the concentrations start to decrease suggesting an optimal temperature or nutrient depletion. The correlation with clouds is significant in some areas but negligible in other areas, while the correlations with wind speed and its components are generally weak. The effects of clouds and winds are less predictable with weekly climatologies because of unknown effects of averaging variable and intermittent physical forcing (e.g. over storm event scales with mixing and upwelling of nutrients) and the time scales of acclimation by the phytoplankton.

Comiso, Josefino C.↗

Mass Efficiencies for Common Large-Scale Precision Space Structures

This paper presents a mass-based trade study for large-scale deployable triangular trusses, where the longerons can be monocoque tubes, isogrid tubes, or coilable longeron trusses. Such structures are typically used to support heavy reflectors, solar panels, or other instruments, and are subject to thermal gradients that can vary a great deal based on orbital altitude, location in orbit, and self-shadowing. While multi layer insulation (MLI) blankets are commonly used to minimize the magnitude of these thermal disturbances, they subject the truss to a nonstructural mass penalty. This paper investigates the impact of these add-on thermal protection layers on selecting the lightest precision structure for a given loading scenario.

triangular truss↗

Observations of How Magnetofluid Turbulence Dissipates at Small Scales

The solar wind is a turbulent magneto fluid that can be studied intensively at multiple scales. Investigations using single spacecraft have revealed much about the properties of the solar wind throughout the heliosphere (from 0.3 AU to 100 AU). More recently, data from multiple spacecraft have provided further details of both the statistical properties of the turbulence and its small-scale structure. In particular, high time resolution magnetic field measurements from the four Cluster spacecrafl have led to the conclusion that at spatial scales of order the proton inertial length and smaller, the turbulence becomes strongly anisotropic and the power in fluctuations that are perpendicular to the (local) magnetic field is measured to be much larger than that in fluctuations that are parallel to the magnetic field. As the spatial scales approach the electron inertial length, the power is almost completely dissipated. Various analysis techniques and theoretical ideas have been put forward to account for the properties of those measurements. The talk will describe the current state of observations, theory and simulations.

Goldstein, M. L.↗

Nanosecond Laser Drying in Wafer Foundries for Significant Energy Efficiency Improvement

Surface drying is a critical process in microelectronics wafer fabrication. In order to reduce and eliminate watermarks, many surface drying processes have been studied and used. Most of the wafer foundries currently use drying processes based on Isopropyl Alcohol (IPA), which causes serious safety (fire), health, environmental, and energy efficiency issues. The long-term goal of this project is to develop a fast, effective, chemical-free, and extremely energy efficient wafer drying technology that employs nanosecond laser-induced sub-surface evaporation and explosion. The objectives of this project are to 1) experimentally develop and verify the laser surface drying method, explore and identify how and to what extent various physical parameters influence the drying efficiency and effectiveness; and 2) understand and optimize the underlying thermodynamics in the proposed laser surface drying, including micro/nanoscale sub-surface superheating, evaporation, explosion, and photo/thermochemical bond breaking via atomistic modeling and experimental characterization. Toward these objectives, five tasks have been accomplished successfully, including 1) develop in-lab laser surface drying setup and study the effect of varied laser parameters, 2) use multiscale hybrid-modeling to study and understand the physics of water behavior during drying toward process optimization, 3) investigate the effect of drying conditions on the drying effectiveness, 4) develop a large-scale laser drying scanning system with automatic scanning, and 5) conduct large-scale simulation to study the effect of dopant level and develop strategies for system development toward industry deployment.

42 ENGINEERING↗

Using soil library hyperspectral reflectance and machine learning to predict soil organic carbon: Assessing potential of airborne and spaceborne optical soil sensing

Soil organic carbon (SOC) is a key variable to determine soil functioning, ecosystem services, and global carbon cycles. Spectroscopy, particularly optical hyperspectral reflectance coupled with machine learning, can provide rapid, efficient, and cost-effective quantification of SOC. However, how to exploit soil hyperspectral reflectance to predict SOC concentration, and the potential performance of airborne and satellite data for predicting surface SOC at large scales remain relatively underknown. Here, this study utilized a continental-scale soil laboratory spectral library (37,540 full-pedon 350–2500 nm reflectance spectra with SOC concentration of 0–780 g·kg –1 across the US) to thoroughly evaluate seven machine learning algorithms including Partial-Least Squares Regression (PLSR), Random Forest (RF), K-Nearest Neighbors (KNN), Ridge, Artificial Neural Networks (ANN), Convolutional Neural Networks (CNN), and Long Short-Term Memory (LSTM) along with four preprocessed spectra, i.e. original, vector normalization, continuum removal, and first-order derivative, to quantify SOC concentration. Furthermore, by using the coupled soil-vegetation-atmosphere radiative transfer model, we simulated twelve airborne and spaceborne hyper/multi-spectral remote sensing data from surface bare soil laboratory spectra to evaluate their potential for estimating SOC concentration of surface bare soils. Results show that LSTM achieved best predictive performance of quantifying SOC concentration for the whole data sets (R 2 = 0.96, RMSE = 30.81 g·kg –1 ), mineral soils (SOC ≤ 120 g·kg –1 , R 2 = 0.71, RMSE = 10.60 g·kg –1 ), and organic soils (SOC > 120 g·kg –1 , R 2 = 0.78, RMSE = 62.31 g·kg –1 ). Spectral data preprocessing, particularly the first-order derivative, improved the performance of PLSR, RF, Ridge, KNN, and ANN, but not LSTM or CNN. We found that the SOC models of mineral and organic soils should be distinguished given their distinct spectral signatures. Finally, we identified that the shortwave infrared is vital for airborne and spaceborne hyperspectral sensors to monitor surface SOC. This study highlights the high accuracy of LSTM with hyperspectral/multispectral data to mitigate a certain level of noise (soil moisture <0.4 m 3 ·m –3 , green leaf area < 0.3 m 2 ·m –2 , plant residue <0.4 m 2 ·m –2 ) for quantifying surface SOC concentration. Forthcoming satellite hyperspectral missions like Surface Biology and Geology (SBG) have a high potential for future global soil carbon monitoring, while high-resolution satellite multispectral fusion data can be an alternative.

54 ENVIRONMENTAL SCIENCES↗

On the scaling of small-scale jet noise to large scale

An examination was made of several published jet noise studies for the purpose of evaluating scale effects important to the simulation of jet aeroacoustics. Several studies confirmed that small conical jets, one as small as 59 mm diameter, could be used to correctly simulate the overall or PNL noise of large jets dominated by mixing noise. However, the detailed acoustic spectra of large jets are more difficult to simulate because of the lack of broad-band turbulence spectra in small jets. One study indicated that a jet Reynolds number of 5 x 10 exp 6 based on exhaust diameter enabled the generation of broad-band noise representative of large jet mixing noise. Jet suppressor aeroacoustics is even more difficult to simulate at small scale because of the small mixer nozzles with flows sensitive to Reynolds number. Likewise, one study showed incorrect ejector mixing and entrainment using small-scale, short ejector that led to poor acoustic scaling. Conversely, fairly good results were found with a longer ejector and, in a different study, with a 32-chute suppressor nozzle. Finally, it was found that small-scale aeroacoustic resonance produced by jets impacting ground boards does not reproduce at large scale.

Soderman, Paul T.↗

Performance of CMS muon reconstruction from proton-proton to heavy ion collisions

The performance of muon tracking, identification, triggering, momentum resolution, and momentum scale has been studied with the CMS detector at the LHC using data collected at √(s$_{NN}$) = 5.02 TeV in proton-proton (pp) and lead-lead(PbPb) collisions in 2017 and 2018, respectively, and at √(s$_{NN}$) = 8.16 TeV in proton-lead (pPb) collisions in 2016. Muon efficiencies, momentum resolutions, and momentum scales are compared by focusing on how the muon reconstruction performance varies from relatively small occupancy pp collisions to the larger occupancies of pPb collisions and, finally, to the highest track multiplicity PbPb collisions. We find the efficiencies of muon tracking, identification, and triggering to be above 90% throughout most of the track multiplicity range. The momentum resolution and scale are unaffected by the detector occupancy. The excellent muon reconstruction of the CMS detector enables precision studies across all available collision systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atmospheric numerical modeling resource enhancement and model convective parameterization/scale interaction studies

Research will be undertaken in this contract in the area of Modeling Resource and Facilities Enhancement to include computer, technical and educational support to NASA investigators to facilitate model implementation, execution and analysis of output; to provide facilities linking USRA and the NASA/EADS Computer System as well as resident work stations in ESAD; and to provide a centralized location for documentation, archival and dissemination of modeling information pertaining to NASA's program. Additional research will be undertaken in the area of Numerical Model Scale Interaction/Convective Parameterization Studies to include implementation of the comparison of cloud and rain systems and convective-scale processes between the model simulations and what was observed; and to incorporate the findings of these and related research findings in at least two refereed journal articles.

Cushman, Paula P.↗

Quantifying Moisture Sources of Arctic Atmospheric Rivers During the Recent Historical Period

Atmospheric rivers (ARs), filaments of intense atmospheric moisture transport, play a significant role in delivering moisture poleward into the Arctic and triggering weather extremes. Although previous studies have focused on large‐scale circulations driving these events, this study investigates ARs through attributing their moisture sources using the Community Atmosphere Model version 5 (CAM5) with moisture‐tagging capability. Examining ARs in the Atlantic and Pacific sectors of the Arctic separately revealed distinct contributions from remote versus local, and ocean versus land, moisture sources. Unlike non‐AR events, Arctic ARs primarily draw moisture from their respective ocean basins in lower‐latitude regions during the cold season, and shift to land sources in the warm season. Cold‐season ARs in the Atlantic and Pacific sectors source 73.2% and 85.3% of their moisture from their respective ocean basins at lower latitudes, however warm‐season contributions decrease to 41.3% and 29.4%. In contrast, mid‐ and high‐latitude continents combined contribute 40.1% and 51.3% in the warm season. Trajectory clustering analysis shows that AR moisture sources depend on both their genesis regions and transport pathways. In recent decades, the Arctic has experienced a moistening trend in both the cold and warm seasons. Our results suggest that local and remote sources equally drive the observed cold‐season moistening, whereas remote sources predominantly drive the warm‐season moistening. A better understanding of Arctic AR moisture sources under current climate conditions provides valuable insights into their potential future changes amid the projected heterogeneous northern hemispheric warming.

Arctic↗