Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STIRRING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Catalytic Mechanism of Interfacial Water in the Cycloaddition of Quadricyclane and Diethyl Azodicarboxylate

"On-water" catalysis, the unusual activity of water molecules at the organic solvent-water interface, has been demonstrated in many organic reactions. However, the catalytic mechanism has remained unclear, largely because of the irreproducibility of the organic-water interface under the common stirring condition. In this work, the interfacial area was controlled by employing adsorbed water on mesoporous silica nanoparticles as the catalyst. Reliable kinetics of the cycloaddition reaction of quadricyclane and diethyl azodicarboxylate (DEAD) at the toluene-water interface within the nanoparticle pores were measured. Data reveal an Eley-Rideal mechanism, wherein DEAD adsorbs at the toluene-water interface via hydrogen bonds formed with interfacial water, which lower the activation energy of the cycloaddition reaction. The mechanistic insights gained and preparation of surface water in silica pores described herein may facilitate the future design of improved "on-water" catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Topochemical Synthesis and Electronic Structure of High-Crystallinity Infinite-Layer Nickelates on an Orthorhombic Substrate

Superconductivity in infinite-layer nickelates has stirred much research interest, to which questions regarding the nature of superconductivity remain elusive. A critical leap forward to address these intricate questions is through the growth of high-crystallinity infinite-layer nickelates, including the “parent” phase. Here, we report the synthesis of a high-quality thin-film nickelate, NdNiO 2 . This is achieved through the growth of a perovskite precursor phase (NdNiO 3 ) of superior crystallinity on the NdGaO 3 substrate by off-axis RF magnetron sputtering and a low-temperature topochemical reduction using NaH. We observe a nonlinear Hall effect at low temperatures in this “non-doped” phase. We further study the electronic properties using advanced X-ray scattering and first-principles calculations. We observe spectroscopic indications of the enhanced two-dimensionality and a reduced hybridization of Nd 5d and Ni 3d orbitals. These findings unlock new pathways for preparing high-quality infinite-layer nickelates and provide new insights into the intrinsic features of these compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Unraveling the Ion Adsorption Kinetics in Microporous Carbon Electrodes: A Multiscale Quantum-Continuum Simulation and Experimental Approach

With the understanding that sorption in porous carbon electrodes is crucial to many environmental and energy technologies, such as capacitive deionization (CDI), supercapacitor energy storage, and activated carbon filters. In each of these examples, a practical model that can describe ion electrosorption kinetics is highly desirable for accelerating material design. Here, we proposed a multiscale model to study the ion electrosorption kinetics in porous carbon electrodes by combining quantum mechanical simulations with continuum approaches. Our model integrates the Butler-Volmer (BV) equation for sorption kinetics and a continuously stirred tank reactor (CSTR) formulation with atomistic calculations of ion hydration and ion-pore interactions based on density functional theory (DFT). We validated our model experimentally by using ion mixtures in a flow-through electrode CDI device and developed an in-line UV absorption system to provide unprecedented resolution of individual ions in the separation process. We showed that the multiscale model captures unexpected experimental phenomena that cannot be explained by the traditional ion electrosorption theory. The proposed multiscale framework provides a viable approach for modeling separation processes in systems where pore sizes and ion hydration effects strongly influence the sorption kinetics, which can be leveraged to explore possible strategies for improving carbon-based and, more broadly, pore-based technologies

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microwave-Assisted Synthesis of Cu@IrO 2 Core-Shell Nanowires for Low-Temperature Methane Conversion

A facile microwave-assisted synthesis was developed for the tunable fabrication of a novel Cu@IrO 2 core@shell nanowire motif. Experimental parameters, such as (i) reaction time, (ii) the method of addition of the Ir precursor, (iii) capping agent, (iv) reducing agent, as well as (v) the capping agent-to-reducing agent ratio, were subsequently optimized. The viability of other methods based on previously reported literature, such as refluxing, stirring, and physical sonication, was studied and compared with our optimized microwave-assisted protocol in creating our as-prepared materials. It should be noted that the magnitude of the IrO 2 shell could be tailored based on varying the Cu: Ir ratio coupled with judicious variations in the amounts of capping agent and reducing agent. Structural characterization techniques, such as XRD, XPS, and HRTEM (including HRTEM-EDS), were used to analyze our Cu@IrO 2 motifs. Specifically, the shell could be reliably tailored from sizes of 10 nm, 8 nm, 6 nm, and 3.5 nm with corresponding Cu: Ir ratios of 10:1, 15:1, 20:1, and 25:1, respectively. Moreover, the structural integrity of the motifs was probed and found to have been maintained after not only heat treatment but also the post-methane conversion process, indicative of an intrinsically high stability. Both components within the CuO-IrO 2 interface were able to activate methane at temperatures between 400 to 500 K with a reduction of the associated metal cations (Cu 2+ → Cu 1+ ; Ir 4+ → Ir 3+ ) and the deposition of CH x fragments on the surface, as clearly observed in the ambient-pressure XPS results. Thus, on the basis of their stability and chemical activity, these core-shell materials could be very useful for the catalytic conversion of methane into 'higher value" chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Heterostructured Lepidocrocite Titanate-Carbon Nanosheets for Electrochemical Applications

Lepidocrocite-type titanates that reversibly intercalate sodium ions at low potentials (~0.6 V vs Na/Na + ) are promising anode candidates for sodium-ion batteries. However, large amounts of carbon additives are often used to improve their electrical conductivity and overcome poor cycling performance in the electrode composites. To ameliorate electronic transport issues of lepidocrocite titanate (K 0.8 Ti 1.73 Li 0.27 O 4 , KTL) in sodium-ion batteries, we have designed and synthesized heterostructures of exfoliated lepidocrocite-type titanium oxide (LTO) nanosheets with alternating carbon layers via a solution-based self-assembly approach. Positively charged dopamine (Dopa) was used as the carbon precursor and intercalated between negatively charged exfoliated titania nanosheets through electrostatic interaction. Dopa-intercalated LTO was then annealed under argon to form conductive carbon layers between titania sheets. The carbon content in the heterostructures was controlled by modifying the self-assembly conditions (i.e., pH, stirring duration, and Dopa-to-LTO ratio). Electrodes were prepared using carbonized heterostructures (LTO-C) without adding more carbon to the composites and tested in sodium half-cell configurations. Further, higher capacities and improved capacity retention over 250 cycles and lower impedance were observed, as the carbon content of LTO-C heterostructures was increased from 0% (LTO nanosheets) to 30%. These results indicate that the self-assembly approach for 2D heterostructured electrode materials is a promising strategy to overcome electronic transport limitations of layered transition-metal oxides and improve their electrochemical performance for next-generation energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Tailored Mesoporous Microspheres by Polymerization-Induced Microphase Separation in Suspension

We describe the preparation of block polymer beads by aqueous suspension polymerization to create poly(caprolactone) (PCL)-block-poly(styrene-co-divinylbenzene) beads that can be selectively etched under basic conditions to yield mesoporous polymer microspheres with uniform pore size. Polyvinylalcohol was used to stabilize the suspension polymerization in which styrene and divinylbenzene monomers were polymerized from a PCL macrochain transfer agent (macroCTA). The resulting polymerization-induced microphase separation process led to a nanostructured bicontinuous morphology. The particle size and pore size were independently tunable: the particle size was controlled by the stir rate of the suspension polymerization-yielding average diameters ranging from 60 to 300 μm-while the pore size was determined by the molar mass of the PCL block, with the mode pore diameters being 6 nm and 11 nm after etching beads made using 13 and 45 kg/mol PCL blocks, respectively. Based on nitrogen sorption measurements, the surface areas of the beads were ~300 m 2 /g when using a PCL macroCTA of 13 kg/mol. The beads were homogenous throughout on the micron length scale as determined by confocal Raman microscopy and lacked an impermeable skin layer as confirmed by scanning electron microscopy. Furthermore, the scalability of suspension polymerization allows for the simple synthesis of large quantities of thermoset microspheres with uniform pore size. We also demonstrate the ability to incorporate functional pore walls into the beads using multiblock precursor polymers. These functionalized mesoporous polymer beads show high affinity for ionic dyes in aqueous solutions (as a proof of principle) and remove dye from the solution at rates exceeding those of commercial ion-exchange resins. The developed procedure could be used to generate other functional surface chemistries with important applications in heterogeneous catalysis, chromatography, and water remediation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rapid Polyolefin Plastic Hydrogenolysis Mediated by Single-Site Heterogeneous Electrophilic/Cationic Organo-group IV Catalysts

A homologous series of cationic electrophilic group IV metal hydrides (M = Ti, Zr, Hf) created by chemisorption of the corresponding MNp 4 precursors on highly Brønsted acidic sulfated alumina (AlS) to yield loosely coordinated surface AlS/MNp 2 (Np = neopentyl) species are systematically characterized by ICP, EXAFS/XANES, DRIFTS, and solid-state high-resolution multidimensional NMR spectroscopy (SSNMR), as well as by energy span DFT computation. With effective stirring, these complexes readily undergo reaction with H 2 to yield AlS/M(alkyl)H species, which are highly active for the hydrogenolysis of diverse commercial polyethylenes, α-olefin-ethylene copolymers, isotactic polypropylene, and postconsumer polyolefins including high-density polyethylenes, yielding medium and small linear and branched hydrocarbons at turnover frequencies as high as 36,300 h –1 at 200 °C/17 atm H 2 for M = Zr. For given polyolefin and reaction conditions, turnover frequencies scale approximately as M = Zr > Hf > Ti, whereas catalyst thermal stability scales approximately as M = Hf ≈ Zr > Ti, and these trends are qualitatively understandable from the DFT analysis. These catalytic results reveal that the AlS/Hf(R)H-mediated hydrogenolysis favors wax-like and liquid products, whereas the AlS/Zr(R)H-mediated hydrogenolysis can be tuned between gases and liquids. Finally, DFT analysis identifies β-alkyl elimination as the turnover-limiting C–C scission process, which is particularly facile in these cationic d 0 complexes but not so in the neutrally charged analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nickel Enhances InPd-Catalyzed Nitrate Reduction Activity and N 2 Selectivity

Palladium–indium (PdIn) is a well-established bimetallic composition for reductively degrading nitrate anions, one of the most ubiquitous contaminants in the groundwater. However, the scarcity and the variable price of these rare-earth and platinum group critical metals may hinder their use for water treatment. Nickel (Ni), a nonprecious metal in the same element group as Pd, could partially replace and lower Pd usage if the resulting trimetallic composition is sufficiently catalytically active. Herein, we report the synthesis and nitrate reduction catalysis of activated carbon-supported “In-on-Pd-on-Ni” catalysts (InPdNi/AC). While bimetallic InPd/AC (0.05 wt % In, 1.3 wt % Pd) was expectedly active, trimetallic InPdNi/AC containing the same In amount, much less Pd (0.1 wt %), and 1 wt % Ni was >17 more active (k cat ≈ 20 vs 349 L min –1 g surface metal –1 ). X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations showed that Pd gained electron density from Ni, correlating to the increased nitrate reduction activity. Ammonium byproduct selectivity for InPdNi/AC (18% at 50% nitrate conversion) was lower compared to that of InPd/AC (48%), suggestive of the higher surface coverage of NO or its greater reactivity with NO 2 – , which led to more N 2 . Accounting for the catalyst precursor, manufacturing costs, and spent metal recovery, we calculated that Ni incorporation lowered the net catalyst cost significantly (from $\$$1028/kg to $\$$170/kg). The trimetallic composition lowered, by ∼26 times, the catalyst cost of a stirred tank reactor sized to the same treatment capacity as that for the bimetallic case. In conclusion, the results demonstrate that the partial replacement of the precious metal with an earth-abundant one leads to a higher efficiency and lower cost denitrification catalyst, via a material strategy that should be beneficial for other clean-water catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

High Performance Cathode Recovery from Different Electric Vehicle Recycling Streams

For environmental and sustainability reasons, spent Li-ion batteries must be recovered and recycled so that the full promise of an electrified future is realized. Li-ion battery recycling streams pose a serious challenge to all existing recycling technologies due to their unknown and diverse chemistry. In this work, four representative recycling streams were used to demonstrate the flexibility of the recycling process developed at Worcester Polytechnic Institute (WPI) to accommodate a variable feed and generate consistent quality cathode material, LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC111). Ni 1/3 Mn 1/3 CO 1/3( OH) 2 precursors derived from four recycling streams were produced by a hydroxide co-precipitation method in a continuous stirred tank reactor. It took two days for the co-precipitation reaction to reach steady state. A possible evolution of the precursor particles up to the steady state was proposed. Both the precursors and cathodes from these four different recycling streams exhibit similar morphology, particle size distribution, and tap density. Moreover, these recovered cathode materials display similar electrochemical properties. Surprisingly these recovered NMC111s have better rate capability than a commercial NMC111 prepared from virgin materials. The different chemical compositions of the incoming recycling streams were shown to have little observed effect on the recovered precursor and resultant cathode material generated by the WPI-developed recycling process with advantages including no sorting, low temperature, and high quality recovered battery materials. Therefore, the WPI-developed process applies to different spent Li-ion battery waste streams and is therefore general.

25 ENERGY STORAGE↗
DOE OSTI2026

Engineering Clostridium Tyrobutyricum for High Butanol Production through Induction Expression of Exogenous NADPH-Dependent HBD

Clostridium tyrobutyricum Δ cat 1:: adh E2 is a promising cell factory for butanol production because of its robustness, high butanol tolerance, and minimal butyrate production. However, excessive acetate and ethanol production remains a major bottleneck limiting its butanol yield. Coexpressing an exogenous hbd ( Ck ) encoding the NADPH-dependent 3-hydroxybutyryl-CoA dehydrogenase (HBD) from Clostridium kluyveri with adh E2 could increase the C4 carbon flux, resulting in increased butanol and decreased acetate and ethanol production. However, constitutively overexpressing hbd ( Ck ) in Δ cat 1:: adh E2 shows little improvement in butanol yield, productivity, and selectivity, which might be caused by redox imbalance and growth inhibition. To alleviate this problem, C. tyrobutyricum MΔ cat 1:: adh E2- Pbgal-hbd ( Ck ) with a dynamic expression of hbd ( Ck ) controlled by an inducible promoter was developed. In serum bottle fermentation at 37 °C, when the hbd ( Ck ) expression was induced at 12 h or in the early exponential phase, butanol production increased ∼20% in yield (from 0.22 to 0.27 g/g glucose), 87.5% in productivity (from 0.16 to 0.30 g/L·h), and 52% in selectivity (from 0.46 to 0.70 g/g total products) compared to the control strain without expressing any hbd(Ck), whereas hbd ( Ck ) expression induced at 0 or 24 h in MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) or constitutively in MΔ cat 1:: adh E2-P cat 1- hbd ( Ck ) showed significantly lower butanol yield and productivity. At 25 °C, MΔ cat 1:: adh E2-P bgal - hbd ( Ck ) with 12 h induction produced the highest butanol titer of 23 g/L with 0.32 g/g yield, 0.16 g/L·h productivity, and 0.83 g/g product selectivity due to much reduced acetate formation. Subsequent scale-up to a stirred-tank bioreactor at 37 °C increased productivity to 0.39 g/L·h while also achieving high butanol titer (21.8 g/L), yield (0.30 g/g), and selectivity (0.67 g/g). The optimized induction timing resulted in a balanced NAD(P)H pool, effectively channeling substrates toward butanol biosynthesis. It was concluded that the timing for hbd ( Ck ) expression was critical as it affected glucose catabolism, cell growth, redox balance, and carbon flux distribution. These findings underscore the potential of dynamic metabolic regulation to overcome bottlenecks in biobutanol production, providing a scalable and economically viable bioprocess for industrial application.

Clostridium tyrobutyricum↗
DOE OSTI2012

Detailed kinetic modeling study of n -pentanol oxidation

To help overcome the world’s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n -butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n -pentanol and n -hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n -pentanol based on modeling rules previously presented for n -butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n -pentanol conformation and to obtain C–H and C–C bond dissociation energies. In addition, the proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2013

Semi-Batch Deoxygenation of Canola- and Lard-Derived Fatty Acids to Diesel-Range Hydrocarbons

Fatty acids (FAs) derived via thermal hydrolysis of food-grade lard and canola oil were deoxygenated in the liquid phase using a commercially available 5 wt % Pd/C catalyst. Online quadrupole mass spectrometry and gas chromatography were used to monitor the effluent gases from the semi-batch stirred autoclave reactors. Stearic, oleic, and palmitic acids were employed as model compounds. A catalyst lifetime exceeding 2200 turnovers for oleic acid deoxygenation was demonstrated at 300 degrees C and 15 atm under 10% H-2. The initial decarboxylation rate of palmitic acid under 5% H-2 decreases sharply with increasing initial concentration; in contrast, the initial decarbonylation rate increases linearly, indicative of first-order kinetics. Scale-up of diesel-range hydrocarbon production was investigated by increasing the reactor vessel size, initial FA concentration, and FA/catalyst mass ratio. Lower CO2 selectivity and batch productivity were observed at the larger scales (600 and 5000 mL), primarily because of the higher initial FA concentration (67 wt %) employed. Because unsaturated FAs must be hydrogenated before deoxygenation can proceed at an appreciable rate, the additional batch time required for FA hydrogenation reduces the batch productivity for unsaturated feedstocks. Low-temperature hydrogenation of unsaturated feedstocks (using Pd/C or another less-expensive catalyst) prior to deoxygenation is recommended.

Ford, JP↗
DOE OSTI2011

Speciation and Release Kinetics of Cadmium in an Alkaline Paddy Soil Under Various Flooding Periods and Draining Conditions

This study determined Cd speciation and release kinetics in a Cd-Zn cocontaminated alkaline paddy soil, under various flooding periods and draining conditions, by employing synchrotron-based techniques, and a stirred-flow kinetic method. Results revealed that varying flooding periods and draining conditions affected Cd speciation and its release kinetics. Linear least-squares fitting (LLSF) of bulk X-ray absorption fine structure (XAFS) spectra of the air-dried, and the 1 day-flooded soil samples, showed that at least 50% of Cd was bound to humic acid. Cadmium carbonates were found as the major species at most flooding periods, while a small amount of cadmium sulfide was found after the soils were flooded for longer periods. Under all flooding and draining conditions, at least 14 mg/kg Cd was desorbed from the soil after a 2-hour desorption experiment. The results obtained by micro X-ray fluorescence ({mu}-XRF) spectroscopy showed that Cd was less associated with Zn than Ca, in most soil samples. Therefore, it is more likely that Cd and Ca will be present in the same mineral phases rather than Cd and Zn, although the source of these two latter elements may originate from the same surrounding Zn mines in the Mae Sot district.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2011

Effect of Grain Size on Uranium(VI) Surface Complexation Kinetics and Adsorption Additivity

Laboratory experiments were performed to investigate the contribution of variable grain sizes to uranium adsorption/desorption in a sediment collected from the US DOE Hanford site. The sediment was wet-sieved into four size fractions: coarse sand (1-2 mm), medium sand (0.2-1 mm), fine sand (0.05-0.2 mm), and clay/silt fraction (< 0.05mm). For each size fraction and their composite (sediment), batch experiments were performed to determine uranium adsorption isotherms, and stirred flow-cell experiments were conducted to derive kinetic data of uranium adsorption and subsequent desorption. The results showed that uranium adsorption isotherms and adsorption/desorption kinetics were size-specific, reflecting the effects of size-specific adsorption site concentration and kinetic rate constants. The larger-size fraction had a larger mass percentage in the sediment, but with a smaller adsorption site concentration and generally a slower uranium adsorption/desorption rate. The same equilibrium surface complexation reaction and reaction constant could describe uranium adsorption isotherms for all size fractions and the composite after accounting for the effect of adsorption site concentration. Mass-weighted, linear additivity was observed for both uranium adsorption isotherms and adsorption/desorption kinetics in the composite. Our analysis also showed that uranium adsorption site concentration estimated from the adsorption isotherms was 3 orders of magnitude less than a site concentration estimated from sediment surface area and generic site density. One important implication of this study is that grain size distribution may be used to estimate uranium adsorption site, and adsorption/desorption kinetic rates in heterogeneous sediments from a common location.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Contact with Electrically Conductive Inert Solids Alters Intrinsic Heterogeneous Brønsted Acid Catalysis

Interfacial electric fields at heterogeneous catalyst surfaces have been demonstrated to alter kinetics of liquid-phase reactions. In these systems, electric fields are generated from applying a potential to the catalyst through connection to a potentiostat or through electron transfer from redox-active species in solution. Here, we demonstrate that catalyst polarization can also occur by simply contacting electrically conductive inert solids, leading to the counterintuitive conclusion that a catalyst particle touching an inert solid can alter intrinsic reaction rates. Using dehydration of 1-methylcyclopentanol to 1-methylcyclopentene catalyzed by Brønsted-acidic carboxylic acid groups on carbon nanotubes as a proof-of-concept probe reaction, we show that catalyst contact with inert, thermally reduced carbon nanotubes leads to order-of-magnitude changes in reaction rate. Furthermore, we demonstrate that these contact-induced effects can also be observed under standard laboratory reaction conditions, where particle-to-particle contact in stirred catalyst powder suspensions is sufficient to demote rates by ∼8-fold. This work provides the foundation for a new method of reaction rate control, which could have implications whenever heterogeneous catalyst particles are in contact with inert materials for liquid-phase reactions in the presence of electrolyte.

Alcohols↗
DOE OSTI2014

Fluorescence Correlation Spectroscopy and Nonlinear Stochastic Reaction-Diffusion

The currently existing theory of fluorescence correlation spectroscopy (FCS) is based on the linear fluctuation theory originally developed by Einstein, Onsager, Lax, and others as a phenomenological approach to equilibrium fluctuations in bulk solutions. For mesoscopic reaction-diffusion systems with nonlinear chemical reactions among a small number of molecules, a situation often encountered in single-cell biochemistry, it is expected that FCS time correlation functions of a reaction-diffusion system can deviate from the classic results of Elson and Magde [Biopolymers (1974) 13:1-27]. We first discuss this nonlinear effect for reaction systems without diffusion. For nonlinear stochastic reaction-diffusion systems there are no closed solutions; therefore, stochastic Monte-Carlo simulations are carried out. We show that the deviation is small for a simple bimolecular reaction; the most significant deviations occur when the number of molecules is small and of the same order. Extending Delbrück-Gillespie’s theory for stochastic nonlinear reactions with rapidly stirring to reaction-diffusion systems provides a mesoscopic model for chemical and biochemical reactions at nanometric and mesoscopic level such as a single biological cell.

Del Razo, Mauricio↗
DOE OSTI2018

Response of the Hydrological Cycle in Asian Monsoon Systems to Global Warming Through the Lens of Water Vapor Wave Activity Analysis

Here, the column integrated water vapor (CWV)-based local wave activity (LWA) is adapted to examine the response of the hydrological cycle and extreme of the Asian summer monsoon in CMIP5 simulations under the RCP8.5 forcing scenario. A tight linear relationship between CWV LWA (A + ) and its sink (P$ ~\atop{-}$E + ), which measures the intensity of the local hydrological cycle and extremes, affords a simple scaling framework for the hydrological cycle intensity in terms of the contributions from (i) ratio of moisture participating in the hydrological cycle, (ii) stirring length scale, (iii) background moisture gradient, and (iv) hydrological cycling rate (HCR). Future moisture LWA over the broad Asian monsoon region shows a large increase (~35%), attributable largely to the increase of the background moisture. Laslty, the scaling analysis reveals a distinct mix of the contributing factors for the increase in (P$ ~\atop{-}$E + ) between East Asian and Indian monsoon regions, despite both experiencing sizable increase of (P$ ~\atop{-}$E + ).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Oceanic Heat Delivery to the Antarctic Continental Shelf: Large-Scale, Low-Frequency Variability

According to the article, onshore penetration of oceanic water across the Antarctic continental slope (ACS) plays a major role in global sea level rise by delivering heat to the Antarctic marginal seas, thus contributing to the basal melting of ice shelves. Here the time-mean (Φ mean ) and eddy (Φ eddy ) components of the heat transport (Φ) across the 1,000-m isobath along the entire ACS are investigated using a 0.1° global coupled ocean/sea ice simulation based on the Los Alamos Parallel Ocean Program (POP) and sea ice (Community Ice CodE) models. In this work, comparison with in situ hydrography shows that the model successfully represents the basic water mass structure, with a warm bias in the Circumpolar Deep Water layer. Segments of on-shelf Φ, with lengths of O(100–1,000 km), are found along the ACS. The circumpolar integral of the annually averaged Φ is O(20 TW), with Φ eddy always on-shelf, while Φ mean fluctuates between on-shelf and off-shelf. Stirring along isoneutral surfaces is often the dominant process by which eddies transport heat across the ACS, but advection of heat by both mean flow-topography interactions and eddies can also be significant depending on the along- and across-slope location. The seasonal and interannual variability of the circumpolarly integrated Φ mean is controlled by convergence of Ekman transport within the ACS. Prominent warming features at the bottom of the continental shelf (consistent with observed temperature trends) are found both during high-Southern Annular Mode and high-Niño 3.4 periods, suggesting that climate modes can modulate the heat transfer from the Southern Ocean to the ACS across the entire Antarctic margin.

54 ENVIRONMENTAL SCIENCES↗