Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Characterization of Cu–Ni nanostructured alloys obtained by a chemical route. Influence of the complexing agent content in the starting solution

The influence of the amount of complexing agent added to the starting solution on the physicochemical properties of Cu–Ni nanostructured alloys obtained through a chemical route, was studied. For this purpose, three Cu–Ni nanoalloy samples were synthesized by a previously developed procedure, starting from solutions with citric acid to metal molar ratios (C/Me) of 0.73, 1.00 and 1.50. The synthesis technique consisted in preparing a precursor via the citrate-gel method, and carrying out subsequent thermal treatments in controlled atmospheres. Sample characterization was performed by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, transmission electron microscopy, X-ray nanoanalysis and electron diffraction. In the three cases, copper and nickel formed a solid solution with a Cu/Ni atomic ratio close to 50/50, and free of impurities inside the crystal structure. The citric acid content of the starting solution proved to have an important influence on the morphology, size distribution, porosity, and crystallinity of the Cu–Ni alloy microparticles obtained, but a lesser influence on their chemical composition. The molar ratio C/Me = 1.00 resulted in the alloy with the Cu/Ni atomic ratio closest to 50/50. - Highlights: • We synthesize Cu–Ni nanoalloys by a chemical route based on the citrate-gel method. • We study the influence of the complexing agent content of the starting solution. • We characterize the samples by electron microscopy and X-ray techniques. • Citric acid influences the shape, size, porosity and crystallinity of the alloys.

36 MATERIALS SCIENCE↗

Fabrication of Al-Zn solid solution via friction stir processing

Highlights: • Thermomechanical nature of FSP was utilized for mechanical alloying. • Zn particles dissolved in Al during FSP to form solid solution. • Second pass of FSP lead to homogenization and partial decomposition of the solid solution. • Processed alloy exhibited improved hardness over base and FSPed metal. • The process can be adopted for site specific property enhancement. - Abstract: The present study demonstrates that friction stir processing (FSP) can be used as a mechanical alloying tool to process solid solution. Zn was incorporated in commercially pure aluminium by multi-pass FSP leading to its dissolution and formation of supersaturated solid solution which was confirmed by X-ray diffraction and scanning electron microscopy. The hardness across the stir zone matched with the distribution of Zn and was significantly improved compared to the base metal. The supersaturated solid solution that formed in the first pass, partially decomposed during the second pass, leading to the formation of fine Al-Zn precipitates. Thermal stability of the microstructure against abnormal grain growth was also improved after the second pass due to the pinning effect of the grain boundary precipitates. FSP also caused grain refinement of the alloy yielding fine equiaxed grains in the range of 4–6 μm with a high fraction (> 67%) of high angle grain boundaries. Such microstructure is conducive for isotropic properties and the fact that the microstructure is stable against thermal cycles make the process suitable for selective alloying for location specific property enhancement.

36 MATERIALS SCIENCE↗

The magnetic properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} solid solutions (M = Co, Mn, Sc, Al)

Graphical abstract: In Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} solid solution, both magnetic ions (Co{sup 3+}, Mn{sup 3+}) and nonmagnetic ions (Sc{sup 3+}, Al{sup 3+}) were chosen to partially replace Fe{sup 3+}. Their magnetic properties were carefully investigated. Figures show M-H loops at RT of Co{sup 3+} doped sample (left) and Sc{sup 3+} substituted solid solution (right). Highlights: {yields} The electrical resistivity of BiFeO{sub 3} is enhanced by forming solid solution with BaTiO{sub 3}. {yields} We replace Fe{sup 3+} by both magnetic ions Co{sup 3+}, Mn{sup 4+} and nonmagnetic ions Sc{sup 3+}, Al{sup 3+} to investigate the magnetic properties. {yields} Structure-magnetic property relationship has been established by Rietveld refinement. -- Abstract: Solid solutions with general formula Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.81}M{sub 0.09}Ti{sub 0.1}O{sub 3} (M = Co, Mn, Sc, Al) together with parental Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} were prepared by the traditional solid state reaction method. Their structural, room temperature magnetic, and dielectric properties were investigated. X-ray diffraction analysis indicated that all samples maintained original R3c space group. M-H hysteresis loop of Co{sup 3+} doped sample saturated at an applied field of 1 T with spontaneous magnetization of 1.735 emu/g, while Mn{sup 4+} substitution enhanced the magnetization of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} less strongly; addition of Sc{sup 3+} helped decrease magnetic coercive field while Al{sup 3+} modified sample exhibited paramagnetic M-H hysteresis loop. Differential scanning calorimetry was applied to determine the Neel temperature (T{sub N}) and the T{sub N} for undoped, Co{sup 3+}, Mn{sup 4+}, Sc{sup 3+}, Al{sup 3+} doped solid solutions were 318.1, 324.3, 335.7, 293.9 and 295.8 respectively. Sc{sup 3+} substitution had little influence on the dielectric properties of Bi{sub 0.9}Ba{sub 0.1}Fe{sub 0.9}Ti{sub 0.1}O{sub 3} while Al{sup 3+} doping improved its dielectric constant. In contrast, Co{sup 3+}, Mn{sup 4+} doped samples showed decreased permittivity but inhibited tan {delta} at frequencies larger than 30 kHz.

36 MATERIALS SCIENCE↗

Thermal decomposition behavior of Cu–Al layered double hydroxide, and ethylenediaminetetraacetate-intercalated Cu–Al layered double hydroxide reconstructed from Cu–Al oxide for uptake of Y{sup 3+} from aqueous solution

Graphical abstract: Display Omitted Highlights: ► Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. ► The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. ► The edta·Cu–Al LDH could selectively take up rare earth ions from a mixed solution. -- Abstract: CO{sub 3}{sup 2−}-intercalated Cu–Al layered double hydroxide (CO{sub 3}·Cu–Al LDH) was calcined to yield Cu–Al oxide, and then ethylenediaminetetraacetate-intercalated Cu–Al LDH (edta·Cu–Al LDH) was prepared by reconstructing Cu–Al oxide in edta solution. Decomposition of CO{sub 3}·Cu–Al LDH occurred in four stages. The production of Cu–Al oxide was caused by the thermal decomposition of CO{sub 3}·Cu–Al LDH until the third stage. The first stage was the elimination of adsorbed surface water and interlayer water in CO{sub 3}·Cu–Al LDH. The second and third stages were the dehydroxylation of the brucite-like octahedral layers and the elimination of CO{sub 3}{sup 2−} intercalated in the interlayers. The edta·Cu–Al LDH was found to take up Y{sup 3+} in aqueous solution. The uptake of Y{sup 3+} was caused not only by the chelating function of Hedta{sup 3−} in the interlayer but also by the chemical behavior of Cu–Al LDH itself. The edta·Cu–Al LDH was found to selectively take up rare earth ions from a mixed solution. The degree of uptake was high, in the order Sc{sup 3+} > Y{sup 3+} > La{sup 3+} for all time durations, which was attributable to differences among the stabilities of Sc(edta){sup −}, Y(edta){sup −} and La(edta){sup −}.

36 MATERIALS SCIENCE↗

Water-dispersible and quasi-superparamagnetic magnetite nanoparticles prepared in a weakly basic solution at the low synthetic temperature

Highlights: • Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature. • The double layer may be steadily formed on the surfaces of magnetite nanoparticles at the high pH value. • Magnetite nanoparticles present a quasi-superparamagnetic property and a good dispersion in the aqueous solution. - Abstract: Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method. As a comparison, the oxidative precipitation method was also applied in this study. The structure, morphology, and other properties of the obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The above characterization data indicate that small size and narrow size distribution are found for magnetite nanoparticles prepared by the co-precipitation method. Further magnetic property and Zeta potential results illuminate that magnetite nanoparticles prepared by this method display a quasi-superparamagnetic property and a good dispersion in the aqueous solution. Based on the investigation results, the magnetite nanoparticles with a quasi-superparamagnetic property and a fine dispersion can be facilely prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of excess vacancies in stabilizing solute clusters in low-alloy steels

The formation of solute clusters in irradiated low-alloy steels, such as reactor pressure vessel steels, is a critical cause of radiation hardening and embrittlement. However, the chemical interactions among solute elements and excess vacancies remain to be fully understood. This study employs density functional theory, cluster expansion, and lattice-based Monte Carlo simulations to examine the stability and morphology of nano-size coherent solute clusters with excess vacancies. The findings reveal that excess vacancies are crucial in stabilizing and promoting the growth of Mn-Ni-Si-vacancy clusters. A minimum of seven vacancies is required for stable nucleation and growth of these clusters. These Mn-Ni-Si clusters act as defect sinks, effectively trapping and absorbing mobile vacancies generated under irradiation. Furthermore, phosphorus (P) preferentially dissolves in Mn-Ni-Si clusters due to chemical coupling with vacancies. In conclusion, this study offers new insights into solute-vacancy interactions, enhancing our understanding of solute-defect cluster formation and embrittlement in low-alloy steels.

36 - MATERIALS SCIENCE↗

Speciation of CuCl and CuCl 2 Thiol-Amine Solutions and Characterization of Resulting Films: Implications for Semiconductor Device Fabrication

Thiol-amine mixtures are an attractive medium for the solution processing of semiconducting thin films because of their remarkable ability to dissolve a variety of metals, metal chalcogenides, metal salts, and chalcogens. However, very little is known about their dissolution chemistry. Electrospray ionization high-resolution tandem mass spectrometry and X-ray absorption spectroscopy were employed in this study to identify the species formed upon dissolution of CuCl and CuCl 2 in 1-propanethiol and n -butylamine. Copper was found to be present exclusively in the 1+ oxidation state for both solutions. The copper complexes detected include copper chlorides, copper thiolates, and copper thiolate chlorides. No complexes of copper with amines were observed. Additionally, alkylammonium ions and alkylammonium chloride adducts were observed. These findings suggest that the dissolution is initiated by proton transfer from the thiol to the amine, followed by coordination of the thiolate anions with copper cations. Interestingly, the mass and X-ray absorption spectra of the solutions of CuCl and CuCl 2 in thiol-amine were essentially identical. However, dialkyl disulfides were identified by Raman spectroscopy as an oxidation product only for the copper(II) solution, wherein copper(II) had been reduced to copper(I). Analysis of several thiol-amine pairs suggested that the dissolution mechanism is quite general. Finally, analysis of thin films prepared from these solutions revealed persistent chlorine impurities, in agreement with previous studies. These impurities are explained by the mass spectrometric finding that chloride ligands are not completely displaced by thiolates upon dissolution. These results suggest that precursors other than chlorides will likely be preferred for the generation of high-efficiency copper chalcogenide films, despite the reasonable efficiencies that have been obtained for films generated from chloride precursors in the past.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Molecule Fluorescence Investigations of Solute Transport Dynamics in Nanostructured Membrane Separation Materials

Many materials used for membrane separations comprise of nanoscale structures such as pores and domains. Such nanostructures often control the solute permeability and selectivity of separation membranes. Thus, for future development of highly efficient separation membranes, it is important to understand the structural and chemical properties of these nanostructures, and also their influences on solute transport dynamics. For the last two decades, single-molecule fluorescence techniques have been used to measure the detailed dynamics of solute molecules diffusing in various nanostructured materials, giving valuable insights into molecular transport mechanisms influenced by nanoscale material heterogeneity. This Perspective will discuss recent single-molecule fluorescence studies on solute diffusion in materials relevant to membrane separations, including dense polymer films and nanoporous materials. These studies have revealed the formation and properties of nanostructures, and unique transport dynamics of solute molecules manipulated by their confinement and partitioning to the nanostructures, which play key roles in membrane separations. Furthermore, this Perspective will also point out scientific challenges toward thorough understanding of molecular-level mechanisms in membrane separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Scaling of Water–Ion Interactions and Dynamics in Alkaline Solutions

Water-ion interactions govern many solvent properties critical to solution-phase chemistry and the behavior of liquid water. The water-ion interactions in alkaline conditions were probed using two-dimensional infrared spectroscopy (2D IR), small-angle x-ray scattering (SAXS), and nuclear magnetic resonance spectroscopy (NMR). Energy transfer between the donor molecule KSeCN, used as a 2D IR probe, and the acceptor molecule NaOD was used to track the average separation distance of ions in a D 2 O solution, while SAXS measurements showed effects in the bulk D 2 O solvent. Here, we observe consistent nonlinear scaling in the SeCN - and OD - average separation distance as a function of NaOD concentration while bulk solution D 2 O-to-D 2 O average separation distance remained highly linear. Ultrafast measurements of solution dynamics via 2D IR and polarization-selective pump-probe spectroscopy show consistent scaling in correlation times as a function of concentration. These results suggests that the SeCN - and OD - anions participate in a water-ion network that significantly reduces the degrees of freedom for the distribution of ions in solution below the standard stochastic for ion distribution.

2D IR Spectroscopy↗

Solution Blowing Synthesis of Li-Conductive Ceramic Nanofibers

Solid state electrolytes (SSEs) offer great potential to enable high-performance and safe lithium (Li) batteries. However, the scale-up synthesis and processing of SSEs is a major challenge. In this work, three-dimensional networks of lithium lanthanum titanite (LLTO) nanofibers are produced through a scale-up technique based on solution blowing. Compared with the conventional electrospinning method, the solution blowing technique enables high-speed fabrication of SSEs (e.g., 15 times faster) with superior productivity and quality. Additionally, the room-temperature ionic conductivity of composite polymer electrolytes (CPEs) formed from solution-blown LLTO fibers is 70% higher than the ones formed from electrospun fibers (1.9 x 10 -4 vs 1.1 x 10 -4 S cm -1 for 10 wt % LLTO fibers). Furthermore, the cyclability of the CPEs made from solution-blown fibers in the symmetric Li cell is more than 2.5 times that of the CPEs made from electrospun fibers. These comparisons here show that solution-blown ion-conductive fibers hold great promise for applications in Li metal batteries.

36 MATERIALS SCIENCE↗

An empirical correlation between the enthalpy of solution of aqueous salts and their ability to form hydrates

The ability of aqueous salt solutions to form hydrates by cooling them at ambient pressure is probed by infrared (IR) spectroscopy by examining the structure of the spectra in the hydrogen-bonding region (3,000 - 3,800 cm-1). A collection of 75 organic and inorganic salts in saturated solutions are examined. We have found a correlation between the enthalpy of solution of the salt and its ability to form a hydrate, namely that the salt’s enthalpy of solution is lower than the standard enthalpy of fusion of ice (6 kJ/mol). This observation can serve as an empirical rule that determines whether a salt will form a hydrate upon cooling from its aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Supersymmetric formulation of polytropic gas dynamics and its invariant solutions

In this paper, a supersymmetric extension of the polytropic gas dynamics equations is constructed through the use of a superspace involving two independent fermionic variables and two bosonic superfields. A superalgebra of symmetries of the proposed extended model is determined and a systematic classification of the one-dimensional subalgebras of this superalgebra is performed. Through the use of the symmetry reduction method, a number of invariant solutions of the supersymmetric polytropic gas dynamics equations are found. Several types of solutions are obtained including algebraic-type solutions and propagation waves (simple and double waves). Many of the obtained solutions involve arbitrary functions of one or two bosonic or fermionic variables. In the case where the arbitrary functions involve only the independent fermionic variables, the solutions are expressed in terms of Taylor expansions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optical diagnostic of bipolar electrical discharges in HCl, KCl, and KOH solutions

In this work, the characteristics of the plasma generated in HCl, KCl, and KOH solutions were analyzed using electrical and optical diagnostic techniques. Electrical discharges were initiated between two tungsten electrodes. Current and voltage characteristics have shown the features of a spark discharge for all of the solutions used in the experiment. The reactive species identified in the optical emission spectra depended on the type of solution used to generate the plasma. The time evolution of the reactive species depended on the nature of the solution and on the polarity of the applied pulse. The absorption spectra of the OH radical (X{sup 2}{Pi}{yields} A{sup 2}{Sigma}{sup +}) were acquired when the voltage pulses were applied to the electrodes, with the intensity being lower in the regions between the pulses. The OH radical density was highest for the HCl solution plasma (2 x 10{sup 17} cm{sup -3}) when positive voltage pulses were applied to the electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the chemical kinetics of atmospheric plasma for cell treatment in a liquid solution

Low temperature atmospheric pressure plasmas have been known to be effective for living cell inactivation in a liquid solution but it is not clear yet which species are key factors for the cell treatment. Using a global model, we elucidate the processes through which pH level in the solution is changed from neutral to acidic after plasma exposure and key components with pH and air variation. First, pH level in a liquid solution is changed by He{sup +} and He(2{sup 1}S) radicals. Second, O{sub 3} density decreases as pH level in the solution decreases and air concentration decreases. It can be a method of removing O{sub 3} that causes chest pain and damages lung tissue when the density is very high. H{sub 2}O{sub 2}, HO{sub 2}, and NO radicals are found to be key factors for cell inactivation in the solution with pH and air variation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relativistic solutions for one- and two-dimensional space-charge limited current in coaxial diode

This paper reports the two-dimensional physics and space-charge limited current (SLC) of coaxial diodes with a finite-length emitter. A full-voltage and one-dimensional approximate solution is first obtained by matching the non-relativistic solution to the super-relativistic solution. Including the effects of fields induced by the anode current and the beam itself yields the pinch-limited current in the coaxial diode. The SLC of a practically applied coaxial diode with a finite length emitter is obtained by a semi-analytical method. The solutions well agree with numerical solutions and particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Schematic way to find solution of the outcoupled matter wave with a source term

We propose a schematic way to obtain solution of the outcoupled atom laser beam wave function in the presence of a source term where the beam is influenced by gravity. In this case, we only focus on the external potentials inside the region of Bose-Einstein condensate that are generated by electromagnetic source and gravity. Since the evolution of the atom laser beam can be portrayed through the ordinary Schrödinger equation with a source, we are allowed to express the general solution as the superposition of the homogeneous solution and particular solution. With the given external potentials and ansatz solutions, we attain that the obtained energy depends on the parameter constituting to the ratio between the longitudinal frequency and transverse frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Peakon, pseudo-peakon, and cuspon solutions for two generalized Camassa-Holm equations

In this paper, we study peakon, cuspon, and pseudo-peakon solutions for two generalized Camassa-Holm equations. Based on the method of dynamical systems, the two generalized Camassa-Holm equations are shown to have the parametric representations of the solitary wave solutions such as peakon, cuspon, pseudo-peakons, and periodic cusp solutions. In particular, the pseudo-peakon solution is for the first time proposed in our paper. Moreover, when a traveling system has a singular straight line and a heteroclinic loop, under some parameter conditions, there must be peaked solitary wave solutions appearing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of silver particles on copper substrates using ethanol-based solution for surface-enhanced Raman spectroscopy

The displacement reaction of AgNO{sub 3} and copper metal is an effective and economical way to fabricate Ag-Cu surface enhanced Raman scattering (SERS) substrates. Aqueous solutions of AgNO{sub 3} are usually used for substrate preparation. In this work, a new method for Ag-Cu SERS substrate preparation is proposed, which uses an ethanol solution rather than an aqueous AgNO{sub 3} solution. Analysis of the surface morphologies of sample substrates by field emission scanning electron microscopy (FESEM) showed that the silver nanoparticles prepared by this new method were more regular than those prepared in the traditional aqueous solution. The SERS spectra of Rhodamine 6G (R6G) adsorbed on these Ag-Cu substrates were then investigated and compared. It was found that the Ag-Cu substrates prepared by this method provide significant improvements in Raman signal sensitivity and large-area uniformity. The enhancement factor of this new substrate is about 330 times higher than that prepared using an aqueous AgNO{sub 3} solution under identical experimental conditions. It was also found that 70% of the original sensitivity of the substrate remains after 15 days of exposure to air.

36 MATERIALS SCIENCE↗