Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Review of the findings of the Ignik Sikumi CO2-CH4 gas hydrate exchange field trial

The Ignik Sikumi Gas Hydrate Exchange Field Trial was conducted by ConocoPhillips in partnership with the U.S. Department of Energy, the Japan Oil, Gas, and Metals National Corporation, and the U.S. Geological Survey within the Prudhoe Bay Unit on the Alaska North Slope (ANS) during 2011 and 2012. The 2011 field program included drilling the vertical test well and performing extensive wireline logging through a thick section of gas-hydrate-bearing sand reservoirs that provided substantial new insight into the nature of ANS gas hydrate occurrences. The 2012 field program involved an extended, scientific field trial conducted within a single vertical well (“huff-and-puff” design) through three primary operational phases: 1) injection of a gaseous phase mixture of CO2, N2, and chemical tracers; 2) flowback conducted at down-hole pressures above the stability threshold for native CH4-hydrate, and 3) extended (30-days) flowback at pressures below the stability threshold of native CH4-hydrate. Ignik Sikumi represents the first field investigation of gas hydrate response to chemical injection, and the longest-duration field reservoir response experiment yet conducted. Full descriptions of the operations and data collected have been fully reported by ConocoPhillips and are available to the science community. The 2011 field program indicated the presence of free water within the gas hydrate reservoir, a finding with significant implications to the design of the exchange trial – most notably the use of a mixed gas injectant. While this decision resulted in a complex chemical environment within the reservoir that greatly tests current experimental and modeling capabilities – without such a mixture, it is apparent that injection could not have been achieved. While interpretation of the field data are continuing, the primary scientific findings and implications of the program are: 1) gas hydrate destabilizing is self-limiting, dispelling any notion of the potential for uncontrolled destabilization; 2) wells must be carefully designed to enable rapid remediation of well-bore blockages that will occur during any cessation in operations; 3) appropriate gas mixes can be successfully injected into hydrate-bearing reservoirs; 4) sand production can be well-managed through standard engineering controls; 5) reservoir heat exchange during depressurization was much more favorable than expected – mitigating concerns for near-well-bore freezing and enabling consideration of more aggressive pressure reduction and; 6) CO2-CH4 exchange can be accomplished in natural reservoirs. The next steps in evaluation of exchange technology should feature multiple well applications; however such field programs will require extensive preparatory experimental and numerical modeling studies and will likely be a secondary priority to further field testing of production through depressurization.

Alaska↗

Pore size distribution and methane equilibrium conditions at Walker Ridge Block 313, northern Gulf of Mexico

Coexistence of three methane phases (liquid (L), gas (G), hydrate (H)) in marine gas hydrate systems may occur according to in-situ pressure, temperature, salinity and pore size. In sediments with salinity close to seawater, a discrete zone of three-phase (3P) equilibrium may occur near the base of the regional hydrate stability zone (RHSZ) due to capillary effects. The existence of a 3P zone influences the location of the bottom-simulating reflection (BSR) and has implications for methane fluxes at the base of the RHSZ. We studied hydrate stability conditions in two wells, WR313-G and WR313-H, at Walker Ridge Block 313 in the northern Gulf of Mexico. We determined pore size distributions (PSD) by constructing a synthetic nuclear magnetic resonance (NMR) relaxation time distribution. Correlations were obtained by non-linear regression on NMR, gamma ray, and bulk density logs from well KC-151 at Keathley Canyon. The correlations enabled construction of relaxation time distributions for WR313-G and WR313-H, which were used to predict PSD through comparison with mercury injection capillary pressure measurements. With the computed PSD, L+H and L+G methane solubility was determined from in-situ pressure and temperature. The intersection of the L+G and L+H curves for various pore sizes allowed calculation of the depth range of the 3P equilibrium zone. As in previous studies at Blake Ridge and Hydrate Ridge, the top of the 3P zone moves upwards with increasing water depth and overlies the bulk 3P equilibrium depth. In clays at Walker Ridge, the predicted thickness of the 3P zone is approximately 35 m, but in coarse sands it is only a few meters due to the difference in absolute pore sizes and the width of the PSD. The thick 3P zone in the clays may explain in part why the BSR is only observed in the sand layers at Walker Ridge, although other factors may influence the presence or absence of a BSR.

Bihani, Abhishek↗

Materials for Advanced Ultrasupercritical Steam Turbines Task 4: Cast Superalloy Development

The Steam Turbine critical stationary structural components are high integrity Large Shell and Valve Casing heavy section Castings, containing high temperature steam under high pressures. Hence to support the development of advanced materials technology for use in an AUSC steam turbine capable of operating with steam conditions of 760°C (1400°F) and 35 Mpa (5000 psia), Casting alloy selection and evaluation of mechanical, metallurgical properties and castability with robust manufacturing methods are mandated. Alloy down select from Phase 1 based on producability criteria and creep rupture properties tested by NETL-Albany and ORNL directed the consortium to investigate cast properties of Haynes 282 and Haynes 263. The goals of Task 4 in Phase 2 are to understand a broader range of mechanical properties, the impact of manufacturing variables on those properties. Scale up the size of heats to production levels to facilitate the understanding of the impact of heat and component weight, on metallurgical and mechanical behavior. GE Power & Water Materials and Processes Engineering for the Phase 2, Task 4.0 Castings work, systematically designed and executed casting material property evaluation, multiple test programs. Starting from 15 lbs. cylinder castings to world’s first 17,000 lbs. poured weight, heavy section large steam turbine partial valve Haynes 282 super alloy casting. This has demonstrated scalability of the material for steam Turbine applications. Activities under Task 4.0, Investigated and characterized various mechanical properties of Cast Haynes 282 and Cast Nimonic 263. The development stages involved were: 1) Small Cast Evaluation: 4 inch diam. Haynes 282 and Nimonic 263 Cylinders. This provided effects of liquidus super heat range and first baseline mechanical data on cast versions of conventional vacuum re-melted and forged Ni based super alloys. 2) Step block castings of 300 lbs. and 600 lbs. Haynes 282 from 2 foundry heats were evaluated which demonstrated the importance of proper heat treat cycles for Homogenization, and Solutionizing parameters selection and implementation. 3) Step blocks casting of Nimonic 263: Carried out casting solidification simulation analysis, NDT inspection methods evaluation, detailed test matrix for Chemical, Tensile, LCF, stress rupture, CVN impact, hardness and J1C Fracture toughness section sensitivity data and were reported. 4) Centrifugal Casting of Haynes 282, weighing 1400 lbs. with hybrid mold (half Graphite and half Chromite sand) mold assembly was cast using compressor casing production tooling. This test provided Mold cooling rates influence on centrifugally cast microstructure and mechanical properties. Graphite mold section out performs sand mold across all temperatures for 0.2% YS; %Elongation, %RA, UTS at 1400°F. Both Stress-LMP and conditional Fracture toughness plots data were in the scatter band of the wrought alloy. 5) Fundamental Studies on Cooling rates and SDAS test program. Evaluated the influence of 6 mold materials Silica, Chromite, Alumina, Silica with Indirect Chills, Zircon and Graphite on casting solidification cooling rates. Actual Casting cooling rates through Liquidus to Solidus phase transition were measured with 3 different locations based thermocouples placed in each mold. Compared with solidification simulation cooling rates and measurement of SDAS, microstructure features were reported. The test results provided engineered casting potential methods, applicable for heavy section Haynes 282 castings for optimal properties, with foundry process methods and tools. 6) Large casting of Haynes 282 Drawings and Engineering FEM models and supplemental requirements with applicable specifications were provided to suppliers for the steam turbine proto type feature valve casing casting. Molding, melting and casting pouring completed per approved Manufacturing Process Plan during 2014 Q4. The partial valve casing was successfully cast after casting methods were validated with solidification simulation analysis and the casting met NDT inspection and acceptance criteria. Heat treated and sectioned to extract trepan samples at different locations comparing with cast on coupons test data. Material properties requisite for design, such as tensile, creep/rupture, LCF, Fracture Toughness, Charpy V-notch chemical analysis testing were carried out. The test results will be presented in the final report. The typical Haynes 282 large size Steam Turbine production casting from Order to Delivery foundry schedule with the activity break up is shown in Figures 107 and 108. • From Purchase Order placement to Casting pouring ~ 26 weeks. 1. Sales and commercial review 3 2. Engineering Drawings/models review 4 3. Pattern and core box manufacturing 6 4. Casting process engineering review 4 5. FEM and solidification simulation analysis 4 6. Gating & Feeder Attachments, Ceramic tiling 2 7. Molding and coremaking production scheduling 6 8. Melting planning and schedule 3 9. Pouring, cooling and shake out 2 • From Pouring to casting Delivery ~ 29 weeks 10. Shot blast and riser cutting, gates removal 3 11. Homogenizing , solutionizing HT furnace prep 4 12. Grinding, Fettling 2 13. Aging HT Cycle, cooling 2 14. VT and LPT NDT inspections 2 15. Radiographic inspection 4 16. Mechanical testing, Chemical analysis test certs 4 17. Casting weld repair upgrades and Aging PWHT 4 18. NDT after weld repairs and casting upgrades 3 19. Casting Final Inspection and test certifications 3 20. Package and delivery 2 Hence the Total Lead time from P.O to Casting delivery is approximately 55 weeks. The Task 4.2 and Task 4.3 activities and reporting completed.

Thangirala, Mani↗

Enhanced Cover Assessment Project:Soil Manipulation and Revegetation Tests

The U.S. Department of Energy Office of Legacy Management is evaluating methods to enhance natural changes that are essentially converting conventional disposal cell covers for uranium mill tailings into water balance covers. Conventional covers rely on a layer of compacted clayey soil to limit exhalation of radon gas and percolation of rainwater. Water balance covers rely on a less compacted soil “sponge” to store rainwater, and on soil evaporation and plant transpiration (evapotranspiration) to remove stored water and thereby limit percolation. Over time, natural soil-forming and ecological processes are changing conventional covers by increasing hydraulic conductivity, loosening compaction, and increasing evapotranspiration. The rock armor on conventional covers creates a favorable habitat for vegetation by slowing soil evaporation, increasing soil water storage, and trapping dust and organic matter, thereby providing the water and nutrients needed for plant germination, survival, and sustainable transpiration. Goals and Objectives Our overall goal is to determine if allowing or enhancing these natural changes could improve cover performance and reduce maintenance costs over the long term. This test pad study focuses on cover soil hydrology and ecology. Companion studies are evaluating effects of natural and enhanced changes in covers on radon attenuation, erosion, and biointrusion. We constructed a test cover at the Grand Junction disposal site to evaluate soil manipulation and revegetation methods. The engineering design, construction, and properties of the test cover match the upper three layers of the nearby disposal cell cover: a 1-foot armoring of rock riprap, a 6-inch bedding layer of coarse sand and gravel, and a 2-foot protection layer of compacted fine soil. The test cover does not have a radon barrier—cover enhancement tests leave the radon barrier intact. We tested furrowing and ripping as means for creating depressions parallel to the slope contour, bringing soil up into the rock riprap layer, and loosening and blending compacted fine soil with coarse sand and gravel layers. Objectives of these manipulations include (1) enhancing root growth, (2) increasing seed-soil contact, (3) catching runoff water for plant germination and growth, (4) increasing soil water storage capacity, and (5) enhancing deep drying by disrupting the capillary barrier at the interface of the bedding and protection layers.

54 ENVIRONMENTAL SCIENCES↗

Gas hydrate characterization from a 3D seismic dataset in the deepwater eastern Gulf of Mexico

Seismic stratigraphic features are delineated using principal component analysis of the band limited data at potential gas hydrate sands, and compared and calibrated with spectral decomposition thickness to constrain thickness in the absence of well control. Layers in the abyssal fan sediments are thinner than can be resolved with 50 Hz seismic and thus comprise composite thin-bed reflections. Amplitude vs frequency analysis are used to indicate gas and gas hydrate reflections. Synthetic seismic wedge models show that with 50Hz seismic data, a 40% saturation of a Plio Pleistocene GoM sand in the hydrate stability zone with no subjacent gas can produce a phase change (negative to positive) with a strong correlation between amplitude and hydrate saturation. The synthetic seismic response is more complicated if the gas hydrate filled sediments overlie gassy sediments. Hydrate (or gas) saturation in thin beds enhances the amplitude response and can be used to estimate saturation. Gas hydrate saturation from rock physics, amplitude, and frequency analysis is compared to saturation derived from inversion at several interpreted gas hydrate accumulations in the eastern Gulf of Mexico.

gas hydrate↗

Gas hydrate characterization from a 3D seismic dataset in the deepwater eastern Gulf of Mexico

Principal component analysis of spectral decomposition results combined with amplitude and frequency seismic attributes derived from 3D seismic data are used for the identification and characterization of gas hydrate deposits in the deepwater eastern Gulf of Mexico. In the central deepwater Gulf of Mexico (GoM), logging while drilling LWD data provided insight to the amplitude response of gas hydrate saturation in sands, which could be used to characterize complex gas hydrate deposits in other sandy deposits. In this study, a large 3D seismic data set from equivalent and distal Plio Pleistocene sandy channel deposits in the deepwater eastern Gulf of Mexico is screened for direct hydrocarbon indicators for gas hydrate saturated sands.

gas hydrate↗

Gas Hydrate Characterization from a 3D Seismic Dataset in the Eastern Deepwater Gulf of Mexico

The presence of a gas hydrate petroleum system and seismic attributes derived from 3D seismic data are used for the identification and characterization of gas hydrate deposits in the deepwater eastern Gulf of Mexico. In the central deepwater Gulf of Mexico (GoM), logging while drilling (LWD) data provided insight to the amplitude response of gas hydrate saturation in sands, which could be used to characterize complex gas hydrate deposits in other sandy deposits. In this study, a large 3D seismic data set from equivalent and distal Plio-Pleistocene sandy channel deposits in the deepwater eastern Gulf of Mexico is screened for direct hydrocarbon indicators for gas hydrate saturated sands.

gas hydrate↗

Concurrent Uranium Overmass and Hydraulic Fluid Leak

In the Spring of 2017, the Y-12 National Security Complex had a NCS operational event involving hydraulic fluid leaking into a glovebox containing fissile material. The hydraulic fluid intermixed with fissile material in the glovebox but remained in a safe slab-like configuration. Unknown at the time, a large enough mass of uranium to support a moderated nuclear criticality accident resided below the glovebox floor in an unfavorable volume sand separator system. Thanks to the operator following procedures and shutting down the hydraulic pump supplying the jolter, a potential accident was adverted. As a result of the event, significant physical modifications were made to the process to enhance safety. Additionally, changes were made in how the materials in the glovebox are processed in order to prevent liquid intrusion and significant uranium accumulation in the sand separator system.

42 ENGINEERING↗

Maximizing the habitat restoration potential of controlled releases at hydropower dams; Understanding impacts of hydrograph form on sediment transport

Regulation of streamflow for hydropower often alters natural hydrographs, commonly reducing peak flows, increasing baseflows, and increasing ramping rates. Simultaneously, reservoirs typically trap sediment, reducing the supply to the reach downstream of the dam. These changes to the flow regime and sediment supply impact channel morphology and sediment transport processes in ways that reduce the diversity and suitability of instream habitat. A variety of restoration approaches have attempted to mitigate for some of these changes and a growing number include releases of high flows designed to mimic key characteristics of the pre-regulation hydrograph. One example is the Trinity River, CA, where the addition of augmentation gravel to the channel has been combined with high flows designed to restore portions of the pre-regulation hydrograph to improve channel conditions for spawning fish on the Trinity River, CA. Another example is the high-flow experiments on the Colorado River through the Grand Canyon that aim to restore eroding sand bars that not only provide habitat but camping for rafting groups. More projects that restore portions of the pre-regulation hydrograph are likely in the future because the Federal Energy Regulatory Commission (FERC) requires habitat mitigation efforts in the relicensing process for hydropower facilities. However, the outcomes of these costly restoration efforts are often hard to predict because little is known about how hydrograph form actually impacts channel morphology and bedload transport in rivers. Here we summarize the results of two flume experiments designed to investigate the impacts of hydrograph form on the morphology of a channel bar and bedload transport processes. The first experiment primarily investigated the impacts of hydrograph recession rate on the morphology of a channel-bar in a sand bed channel. Additional runs examined the combined effects of hydrograph recession and a dense patch of vegetation on bar form. The second flume experiment investigated bedload transport processes in an armored, gravel bed channel during hydrographs with varying form. It documented total bedload flux for a hydrograph, bedload flux rates, persistence of the coarse armor surface, and changes in bed surface structure. Both experiments observed links between hydrograph form and the resulting bar morphology or bedload transport processes, providing insight into ways that high flow hydrographs can be designed to better facilitate restoration goals downstream of hydropower facilities.

13 HYDRO ENERGY↗

Formed-in-place Ceramic Systems for Sealing and Flow Control in Geothermal Applications

Conventional oil and gas tools are frequently unsuitable for downhole applications in geothermal wells, largely due to uncased well configurations and their extreme thermal/chemical fluid conditions. Consequently, relatively common O&G tools like bridge plugs and sand control screens are difficult or at times impossible to implement in geothermal wells. In commercial oil and gas, thermite-based tools are being developed for intervention and decommissioning applications, and gaining field experience and credibility. We are developing and testing such systems for geothermal applications, with the objective of forming ceramic sealing and flow control features in-situ. The process uses self-propagating thermite reactions, in which a metal is combined with an oxidizer to release significant amounts of energy in a controlled, non-explosive manner. These solid phase reactions can be engineered to generate ceramic products with specific physical and flow characteristics. We are developing and testing formulations and wireline deployment tools which yield low to high permeability as needed, and preferentially expand to fill boreholes in both large diameter and slimhole wells. Near term applications are bridge plugs for P&A operations, screens for sand control and borehole stabilization, and lost circulation control during drilling. Laboratory tests have demonstrated the ability to form these products under high temperature and pressure conditions. Field tests are in planning to demonstrate the full-scale performance of these tools. This paper will present the status and results of this demonstration project, in its first year of advanced development for the DOE geothermal technologies program. New developments utilizing thermite tools in the HP/HT oil and gas domain will also be highlighted, particularly those which may have utility in geothermal applications.

02 PETROLEUM↗

A Viable Path Forward to Carbon Capture and Storage in Wyoming, USA

The State of Wyoming, USA, benefits from favorable geologic, regulatory, and infrastructure attributes that promote efficient and sustainable carbon capture and storage (CCS). Two research sites in Wyoming exhibit high potential for the underground geologic storage of greater than 50 million metric tons of carbon dioxide (CO 2 ) over 25 years. Funded by the U.S. Department of Energy’s (DOE) Carbon Storage Assurance and Facility Enterprise (DOE CarbonSAFE) Phase I prefeasibility initiative, studies of both sites indicate promising capture, transport, utilization, and storage characteristics. The Dry Fork site is located near Gillette, in northeast Wyoming. Four storage reservoir/seal pairs have been identified at the Dry Fork site that provide excellent prospects for stacked storage of CO 2 . All four reservoirs lie at sufficient depths to maintain supercritical CO 2 and all four seals exhibit favorable characteristics for stratigraphic confinement. The reservoir with the highest expected significance is the Pennsylvanian/Permian Minnelusa Formation, which consists of near-shore dunes and shoreline sands, as well as shale and carbonate layers. The Minnelusa resides at a depth of ~2,900 m below the land surface and is ~45 m thick in the study area. Average porosity for samples from core within 10 km of the study area is 9%, with permeability values as high as 169 mD (n=6). The Permian Opeche Formation seals the Minnelusa and consists of redbed shales with minor fine-grained siltstones and evaporite deposits. Entry pressures as high as ~4700 psia were measured by mercury injection capillary pressure (MICP) analysis on core samples from the Opeche. A CarbonSAFE Phase II feasibility proposal at the Dry Fork site has recently been selected by DOE for negotiation leading to award. The second proposed site is located at the Rock Springs Uplift (RSU) in southwest Wyoming. Four reservoir/seal pairs have been studied at the RSU, all of which present promising geologic attributes for the stacked storage of CO 2 . The two deepest reservoirs (Mississippian Madison Limestone and Pennsylvanian/Permian Weber Formation) and their seals were studied previously under the auspices of the Wyoming Carbon Underground Storage Project (WY-CUSP), which was funded by DOE and the State of Wyoming. For the more recent CarbonSAFE initiative, two shallower reservoir/seal pairs were studied in detail. The highest priority of these reservoirs is the Triassic/Jurassic Nugget Formation, which consists of eolian sands and minor fluvial and interdune deposits. The Nugget lies at a depth of ~2,800 m and is ~140 m thick in the study area. Average measured porosity for samples from core within 40 km of the study site is 9%, with permeability values as high as 91 mD (n=10). The Nugget is sealed by the overlying Jurassic Gypsum Spring and Morrison Formations, as well as a thick (~1,700 m) regional Upper Cretaceous seal that includes shales from multiple geologic units. Entry pressures as high as 1120 psia were measured by MICP for shales within this regional confining unit. Overall, the State of Wyoming provides an advantageous climate to develop sustainable integrated CCS projects based on the following considerations: (1) well-characterized and favorable geology; (2) some of the largest deposits of economically recoverable coal in the USA; (3) an existing CO 2 -enhanced oil recovery industry, including CO 2 pipeline infrastructure; (4) supportive commercial enterprises, including utilities and the oil and gas industry; (5) supportive policymakers; (6) a favorable legal and regulatory environment; (7) proximity to carbon-constrained markets such as the State of California; (8) large CO 2 emission sources, including coal-fired power plants; and (9) backing for carbon capture, storage, and management related research and development, specifically implementation of the Integrated Test Center at Dry Fork Station, which is hosting the coal-track of the NRG/COSIA Carbon XPrize® competition.

Phillips, Erin↗

Numerical Studies of Depressurization-Induced Gas Production from an Interbedded Marine Turbidite Gas Hydrate Reservoir Model

The numerical simulation of thin hydrate-bearing sand layers interbedded with mud layers is investigated. In this model, the lowest hydrate layer occurs at the base of gas hydrate stability and overlies a thinly-interbedded saline aquifer. The predicted gas rates reach 6.25 MMscf/day (~1.77 x 10 5 m 3 /day) after 90 days of continuous depressurization with manageable water production. Development of horizontal dissociating interfaces between hydrate-bearing sand and mud layers is a primary determinant of reservoir performance. A set of simulations has been executed to assess uncertainty in in situ permeability and to determine the impact of the saline aquifer on productivity.

Myshakin, Evgeniy↗

Hydrate Formation in an Unsaturated System - Impacts of Fine Particles and Water Content

Parametric study of hydrate saturation dependent properties of hydrate-bearing sediments requires a large amount of uniform and representative specimens. Expedited synthetization of hydrate-bearing sediments in the laboratory usually uses an unsaturated system due to low methane solubility in water. This study experimentally investigates how various factors affect the distribution of formed hydrate in the sediments via X-ray computed tomography. Results show that the pressure-temperature history is the most critical factor influencing water migration during hydrate formation. Hydrate formed by cooling-pressurization method tends to lead to preferred hydrate formation at core boundaries where exothermic heat can be easily dissipated. The presence of fine-grained particles fails to mitigate this phenomenon, but can effectively suppress water migration even when hydrate is formed using the pressurization-cooling method or the freezing-pressurization-thawing method. Fine-grained particles reduce water activity which further reduce the amount of hydrate formed in the system. The mixing sequence of sand-clay-water mixture affects the final morphology and distribution of each phase and eventually affects hydrate distribution in the sediments. A small amount of clay in sands can suppress water preferentially residing at grain contacts and combine with water acting as a pore filling component. This potentially helps synthesize non-cementing hydrate-bearing sediments in the laboratory more efficiently.

Lei, Liang↗

High-resolution Seismic Imaging of Depositional Characteristics at Gas Hydrate Research Sites in the Gulf of Mexico

High-resolution seismic data acquired by the U.S. Geological Survey (USGS), with support from the U.S. Bureau of Ocean Energy Management (BOEM) and the U.S. Department of Energy (DOE), in 2013 at two geologically distinct study sites in the offshore Gulf of Mexico basin provide an opportunity for detailed characterization and for comparison of the depositional settings of sediments that host high concentrations of gas hydrate at each site. Gas hydrate exists at Green Canyon Block 955 (GC955) within sand layers deposited in a proximal marine channel-levee setting, whereas at Walker Ridge Block 313 (WR313) gas hydrate deposits occur within thin distal levees and sheet sands deposited in a mini-basin environment. A refined understanding of the depositional environment at these sites in turn provides valuable insights regarding reservoir characteristics and controls on gas hydrate occurrence.

Haines, Seth↗

Numerical Simulations of Gas Production from Gas Hydrate Reservoirs at the Prudhoe Bay Unit 7-11-12 Pad on Alaska North Slope

In December 2018, a partnership between the U.S. Department of Energy National Energy Technology Laboratory (DOE NETL), the Japan Oil, Gas and Metals National Corporation (JOGMEC), and the U.S. Geological Survey (USGS) successfully drilled and logged the Hydrate-01 Stratigraphic Test Well (STW) in the greater Prudhoe Bay oil field on Alaska North Slope. The logging-while-drilling (LWD) data confirmed the presence of gas hydrate-bearing reservoirs within two sand reservoirs (Unit B and Unit D) that are suitable targets for future testing. The interpreted log data and core sample measurements were used to create reservoir models for the Prudhoe Bay Unit (PBU) Kuparuk 7-11-12 Site. The models combine both gas hydrate-bearing sections in Unit B and Unit D together with the intermediate Unit C and over- and underburden sands and shales. The vertical heterogeneity in porosity, gas hydrate saturation, and permeability distributions for reservoir and non-reservoir units was implemented using fine mesh discretization. The depressurization method was applied to Unit B to induce gas hydrate destabilization at constant bottom hole pressure (BHP) values. The results of the numerical simulations support the development of production scenarios, well design, surface facilities, and field test procedures with the main goal to perform efficient and safe scientific production testing. Project results contribute to the knowledge base of permafrost-associated gas hydrate accumulations as a future energy source.

Myshakin, Evgeniy↗

Post-Closure Challenges of U.S. Department of Energy Sites in Desert Environments of the Southwestern United States - 12095

U.S. Department of Energy (DOE) sites located in harsh desert environments of the Four Corners region of the southwestern United States require diligence and continual maintenance to ensure the remediation systems function as designed to protect human health and the environment. The geology and climate of this area create issues that are unique to these sites. Geologic formations contain naturally occurring constituents that are often the same as the residual contaminants remaining from historical milling activities at the sites. Although annual precipitation is low, when precipitation events occur they can be of extreme intensity, resulting in erosion and flooding that can quickly destroy infrastructure and rapidly change site conditions. Winds can cause sand storms and sand mounding that effect site features. These challenging environmental conditions, along with the remote locations of the sites, require active management beyond what was originally envisioned for uranium disposal sites to address concerns in a safe and cost-effective manner. The unique environment of the Four Corners region creates many challenges to the LTSM of LM sites in southwestern United States. The remediation efforts and approaches to infrastructure have to be specifically structured to work in this environment. Often, the systems and structures have to be modified based on lessons learned on how to best adapt to these difficult conditions and remote locations. These sites require continual maintenance and additional efforts compared to many other LM sites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Formerly Used Sites Remedial Action Program (FUSRAP) W. R. Grace Building 23 Remedial Action-Challenges and Successes - 12247

Monazite sand processing was conducted at the W. R. Grace Curtis Bay Facility (Baltimore, Maryland) from mid-May 1956 through the spring of 1957 under license to the Atomic Energy Commission (AEC), for the extraction of source material in the form of thorium, as well as rare earth elements. The processing was conducted in the southwest quadrant of a ca. 100 year old, five-story, building (Building 23) in the active manufacturing portion of the facility. Building components and equipment in the southwest quadrant of Building 23 exhibited residual radiological activity remaining from the monazite sand processing. U.S. Army Corps of Engineers (USACE) conducted a remedial investigation (RI) and feasibility study (FS) and prepared a Record of Decision (ROD) to address residual radioactivity on building components and equipment in the southwest quadrant of Building 23. The remedy selected for the southwest quadrant of Building 23, which was documented in the ROD (dated May 2005), was identified as 'Alternative 2: Decontamination With Removal to Industrial Use Levels'. The selected remedy provided for either decontaminating or removing areas of radioactivity to meet the RGs. Demonstration of compliance with the selected ARAR was performed using the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) and other appropriate guidance, as well as appropriate dose modeling codes where necessary. USACE-Baltimore District along with its private industry partner worked together under the terms of a 2008 Settlement Agreement to implement the remedial action (RA) for the southwest quadrant of Building 23. The RA was conducted in two phases: Phase 1 was completed to improve the building condition for support of subsequent remedial action and decrease scope uncertainty of the remedial action, and Phase 2 included decontamination and removal activities to meet the RGs and demonstration of compliance with the selected ARAR. Challenges encountered during the RA include: coordination with stakeholders, coordination between multiple RA contractors, addressing unique structural challenges for Building 23, nonradiological hazards associated with the RA, weather issues, and complex final status survey (FSS) coordination. The challenges during the Phase 1 RA were handled successfully. The challenges for the Phase 2 RA, which is anticipated to be complete by late-summer of 2012, have been handled successfully so far. By fall of 2012, USACE is expecting to finalize a robust RA Closure Report, including the Final Status Survey Report, which summarizes the RA activities and documents compliance with the ROD. During the ongoing RA at Building 23, there have been and still are many challenges both technically and from a project management perspective, due in part to the nature and extent of impact at the site (residual radioactivity within an active processing building), dual oversight by the property owner and USACE, and site-specific challenges associated with a complex RA and multiple contractors. Currently, USACE and its industry partner are overseeing the completion of RA field activities. RA closure documentation for the remediation of Building 23 to address residual contamination in building materials will be reviewed/approved by USACE and its industry partner upon completion of the field activities. USACE and its industry partner are working well together, through the Settlement Agreement, to conduct a cost-efficient and effective remedial action to address the legacy issues at Building 23. This cooperative effort has set a firm foundation for achieving a successful RA at the RWDA using a 'forward think' approach, and it is a case study for other sites where an industry partner is involved. The collaborative effort led to implementation of an RA which is acceptable to the site owner, the regulators, and the public, thus allowing USACE to move this project forward successfully in the FUSRAP program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗