Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resource availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Renewable Energy Zones for Balancing Siting Trade-offs in India

India’s targets of 175 GW of renewable energy capacity by 2022, and 40% generation capacity from non-fossil fuel sources by 2030 will require a rapid and dramatic increase in solar and wind capacity deployment and overcoming its associated economic, siting, and power system challenges. The objective of this study was to spatially identify the amount and quality of wind and utility-scale solar resource potential in India, and the possible siting-related constraints and opportunities for development of renewable resources. Using the Multi-criteria Analysis for Planning Renewable Energy (MapRE) methodological framework, we estimated several criteria valuable for the selection of sites for development for each identified potential "zone", such as the levelized cost of electricity, distance to nearest substation, capacity value (or the temporal matching of renewable energy generation to demand), and the type of land cover. We find that high quality resources are spatially heterogeneous across India, with most wind and solar resources concentrated in the southern and western states, and the northern state of Rajasthan. Assuming India's Central Electricity Regulatory Commission's norms, we find that the range of levelized costs of generation of wind and solar PV resources overlap, but concentrated solar power (CSP) resources can be approximately twice as expensive. Further, the levelized costs of generation vary much more across wind zones than those across solar zones because of greater heterogeneity in the quality of wind resources compared to that of solar resources. When considering transmission accessibility, we find that about half of all wind zones (47%) and two-thirds of all solar PV zones (66%) are more than 25 km from existing 220 kV and above substations, suggesting potential constraints in access to high voltage transmission infrastructure and opportunities for preemptive transmission planning to scale up RE development. Additionally and importantly, we find that about 84% of all wind zones are on agricultural land, which provide opportunities for multiple-uses of land but may also impose constraints on land availability. We find that only 29% of suitable solar PV sites and 15% of CSP sites are within 10 km of a surface water body suggesting water availability as a significant siting constraint for solar plants. Availability of groundwater resources was not analyzed as part of this study. Lastly, given the possible economic benefits of transmission extensions or upgrades that serve both wind and solar generators, we quantified the co-location opportunities between the two technologies and find that about a quarter (28%) of all solar PV zones overlap with wind zones. Using the planning tools made available as part of this study, these multiple siting constraints and opportunities can be systematically compared and weighted to prioritize development that achieves a particular technology target. Our results are limited by the uncertainties associated with the input datasets, in particular the geospatial wind and solar resource, transmission, and land use land cover datasets. As input datasets get updated and improved, the methodology and tools developed through this study can be easily adapted and applied to these new datasets to improve upon the results presented in this study. India is on a path to significantly decarbonize its electricity grid through wind and solar development. A stakeholder-driven, systematic, and integrated planning approach using data and tools such as those highlighted in this study is essential to not only meet the country's RE targets, but to meet them in a cost-effective, and socially and environmentally sustainable way.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Cooperative Game Theory-based Secondary Frequency Regulation in Distribution Systems

Participation of distribution systems in frequency regulation has become an important factor for grid operation after the integration of distributed energy resources (DERs). While available reserves from a single distribution system may not be sufficient for frequency regulation, aggregated reserves from several distribution systems can provide frequency regulation at grid-scale. This paper proposes a cooperative game theory-based approach for secondary frequency regulation in distribution systems consisting of distributed energy resources (DERs). A two-stage strategy is proposed to effectively and precisely determine a change in active power set points of DERs following a command from system operators. In the first stage, the value or worth of each DER and their coalitions are determined using initial rates of change of frequency (ROCOF) for each DER/coalition. In the second stage, the Shapley value, one of the solution concepts of cooperative game theory, is used to determine changes in active power set points of DERs. The proposed method is implemented on several distribution systems including a modified IEEE 13-node system and modified 33-node distribution system.

Gautam, Mukesh↗

TU-D-201-01: 2016 Economics Update

The purpose of this session is to introduce attendees to the healthcare reimbursement system and how it applies to the clinical work of a medical physicist. This will include general information about the different categories of payers and payees, how work is described by CPT codes, and how various payers set values for this work in different clinical settings. 2016 is another year of significant changes to the payment system. This presentation will describe the work encompassed in these codes and will give attendees an overview of the changes for 2016 as they apply to radiation oncology. Finally, some insight into what can be expected during 2017 will be presented. This includes what information is typically released by the Centers for Medicaid and Medicare Services (CMS) during the year and how we as an organization respond. This will include ways members can interact with the AAPM professional economics committee and other resources members may find helpful. Learning objectives1) Basics of how Medicare is structured and how reimbursement rates are set.2) Basic understanding of proposed changes to the 2016 Medicare rules.3) Describe economics and policy resources that are available from the AAPM and how to interact with the professional economics committee.

61 RADIATION PROTECTION AND DOSIMETRY↗

Setaria viridis as a Model System to Advance Millet Genetics and Genomics

Millet is a common name for a group of polyphyletic, small-seeded cereal crops that include pearl, finger and foxtail millet. Millet species are an important source of calories for many societies, often in developing countries. Compared to major cereal crops such as rice and maize, millets are generally better adapted to dry and hot environments. Yet despite their food security value, the genetic architecture of agronomically important traits in millets, including both morphological traits and climate resilience remains poorly studied. These complex traits have been challenging to dissect in large part because of the lack of sufficient genetic tools and resources. In this article, we review the phylogenetic relationship among various millet species and discuss the value of a genetic model system for millet research. We propose that a broader adoption of green foxtail (Setaria viridis) as a model system for millets could greatly accelerate the pace of gene discovery in the millets, and summarize available and emerging resources in S. viridis and its domesticated relative S. italica. These resources have value in forward genetics, reverse genetics and high throughput phenotyping. We describe methods and strategies to best utilize these resources to facilitate the genetic dissection of complex traits. We envision that coupling cutting-edge technologies and the use of S. viridis for gene discovery will accelerate genetic research in millets in general. This will enable strategies and provide opportunities to increase productivity, especially in the semi-arid tropics of Asia and Africa where millets are staple food crops.

59 BASIC BIOLOGICAL SCIENCES↗

Observed changes in dry-season water availability attributed to human-induced climate change

Human-induced climate change impacts the hydrological cycle and thus the availability of water resources. However, previous assessments of observed warming-induced changes in dryness have not excluded natural climate variability and show conflicting results due to uncertainties in our understanding of the response of evapotranspiration. Here in this paper, we employ data-driven and land-surface models to produce observation-based global reconstructions of water availability from 1902 to 2014, a period during which our planet experienced a global warming of approximately 1°C. Our analysis reveals a spatial pattern of changes in average water availability during the driest month of the year over the past three decades compared with the first half of the twentieth century, with some regions experiencing increased and some decreased water availability. The global pattern is consistent with climate model estimates that account for anthropogenic effects, and it is not expected from natural climate variability, supporting human-induced climate change as the cause. There is regional evidence of drier dry seasons predominantly in extratropical latitudes and including Europe, western North America, northern Asia, southern South America, Australia and eastern Africa. We also find that the intensification of the dry season is generally a consequence of increasing evapotranspiration rather than decreasing precipitation.

54 ENVIRONMENTAL SCIENCES↗

Nth-plant supply: corn stover supplies and costs in a fleet of biorefineries

Feedstock cost and cost variability is expected to increase with the number of biorefineries. To quantify this effect, this spatial-economic analysis simulates feedstock cost and cost variability of an industry based on corn stover as a function of the number of biorefineries. Results are reported for nine scenarios (a base case and sensitivity analysis of four variables – harvest efficiency, sustainability constraints, opportunity cost, and corn grain yield) under deterministic and stochastic simulations, assuming biorefineries using 658 000 Mg (725 000 tons) year- 1 of corn stover in 2019. The resulting supply curves are highly elastic (i.e. little change in cost) for the first 50 of the 121 biorefineries, with price increases in subsequent biorefineries depending on scenario. In the base-case deterministic scenario, weighted-average stover costs are $66 Mg -1 ($60 ton- 1 ), $69 Mg -1 ($62 ton -1 ), and $156 Mg -1 ($142 ton -1 ), at the first, 60th, and 121st biorefineries, respectively. The stochastic simulations, subject to observed 30-year corn yield variability, follow a similar pattern, with price distributions that vary by scenario. The base-case stochastic simulations illustrate minimal cost variability for the first 60 biorefineries, but rapid increases in cost variability in the second half of potential biorefineries, with similar patterns observed in the other scenarios. Of the four variables explored, price was most sensitive to harvest efficiency, followed by sustainability constraints, corn yield, and opportunity cost. Results suggest that, under conventional logistics, about half of the US corn stover resource is reliably available with minimum cost increase and variability. Interactive visualization is available at https://doi.org/10.11578/1828779.

09 BIOMASS FUELS↗

Concentrating Solar Power: Best Practices Handbook for the Collection and Use of Solar Resource Data (CSP)

As the world looks for low-carbon sources of energy, solar power stands out as the most abundant energy resource. Harnessing this energy is the challenge for this century. Photovoltaics and concentrating solar power (CSP) are two primary forms of electricity generation using sunlight. These use different technologies, collect different fractions of the solar resource, and have different siting and production capabilities. Although PV systems are most often deployed as distributed generation sources, CSP systems favor large, centrally located systems. Accordingly, large CSP systems require a substantial investment, sometimes exceeding $1 billion in construction costs. Before such a project is undertaken, the best possible information about the quality and reliability of the fuel source must be made available. That is, project developers need to have reliable data about the solar resource available at specific locations to predict the daily and annual performance of a proposed CSP plant. Without these data, no financial analysis is possible. This handbook presents detailed information about solar resource data and the resulting data products needed for each stage of the project.

14 SOLAR ENERGY↗

Copula-Based Flood Frequency Analysis at Ungauged Basin Confluences: Nashville, Tennessee

Many cities are located at or near the confluence of streams where availability of water resources may be enhanced to sustain user needs while also posing an increased flooding risk from multiple tributaries. An accurate flood frequency estimator that models the joint flood potential at a basin confluence is needed. Given that long-term flow observations are often unavailable, estimating flood frequency at ungaged basin confluences proves challenging. Through the use of copulas, this case study demonstrates how an improved flood frequency analysis can be performed for stream confluences at Nashville, TN. The approach involves four major steps including initial data quality control, fitting of marginal distributions of tributary peak flows, construction of a suitable dependence structure, and identification of flood frequency at the confluence point based on synthesized peak flows. This case study may help researchers and practitioners develop a better understanding of joint flood frequency with consideration of upstream dam regulation among several contributing watersheds.

54 ENVIRONMENTAL SCIENCES↗

RECENT TRENDS IN EMERGING TRANSPORTATION FUELS AND ENERGY CONSUMPTION

Abundance of energy can be improved both by developing new sources of fuel and by improving efficiency of energy utilization, although we really need to pursue both paths to improve energy accessibility in the future. Currently, 2.7 billion people or 38% of the world s population do not have access to modern cooking fuel and depend on wood or dung and 1.4 billion people or 20% do not have access to electricity. It is estimated that correcting these deficiencies will require an investment of $36 billion dollars annually through 2030. In growing economies, energy use and economic growth are strongly linked, but energy use generally grows at a lower rate due to increased access to modern fuels and adaptation of modern, more efficient technology. Reducing environmental impacts of increased energy consumption such as global warming or regional emissions will require improved technology, renewable fuels, and CO2 reuse or sequestration. The increase in energy utilization will probably result in increased transportation fuel diversity as fuels are shaped by availability of local resources, world trade, and governmental, environmental, and economic policies. The purpose of this paper is to outline some of the recently emerging trends, but not to suggest winners. This paper will focus on liquid transportation fuels, which provide the highest energy density and best match with existing vehicles and infrastructure. Data is taken from a variety of US, European, and other sources without an attempt to normalize or combine the various data sources. Liquid transportation fuels can be derived from conventional hydrocarbon resources (crude oil), unconventional hydrocarbon resources (oil sands or oil shale), and biological feedstocks through a variety of biochemical or thermo chemical processes, or by converting natural gas or coal to liquids.

01 COAL, LIGNITE, AND PEAT↗

Long-Term Impacts of Constrained Transmission Deployment on the Cost-Reliability Tradeoff

Traditional Resource Adequacy (RA) frameworks in the U.S. undervalue the contributions of inter-regional transmission to resource adequacy during stress periods, focusing on the availability of nameplate capacity instead. However, availability of nameplate capacity does not always translate into electricity delivery, especially during tail events. Moreover, the rapid deployment of energy-limited resources and increasing electricity demand challenge existing resource adequacy frameworks and couple regional electricity demand and availability of supply via transmission. We propose a two-stage framework that goes beyond the existing capacity-centered approaches to reveal the RA contributions of transmission. In the first stage we introduce a multi-objective optimization framework to quantify the merits of transmission expansion via Pareto Frontiers under alternative futures of no transmission investment, primary energy resources availability and demand growth. The second stage focuses on tail events and leverages the results of the first stage to characterize the risk profile of regional consumers across the U.S. under the alternative energy futures. We find that no new transmission can lead to a more expensive and less reliable national grid across scenarios, however, the impact on regional RA can vary. The probabilistic analysis reveals that transmission investments can alleviate the tail risk of consumers, however, the availability of fuel resources does not always alleviate regional tail risks. Our findings inform policymakers and utilities on the prioritization of transmission investments to mitigate the risk of widespread outages, also for tail events, and ensure reliable and affordable electricity delivery to all.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Variable Resource Resilience: How Systems Experience Increased Resilience from Variable and Hybrid Resources

Variable resources like wind and solar are often seen as detriments to system resilience rather than benefits because they may not be available with the capacities or services required during a high-impact low-frequency (HILF) event, whether that is a physical threat, natural disaster, or cyber attack. However, resilience goals and metrics are inadequate for electric energy delivery systems with inverter-based resources. Examination of this topic reveals that renewable resources are well suited to combat many resilience hazards due to local resource availability. Metrics that demonstrate the resilience value of variable resources are presented and categorized for resource (wind, solar, storage, hybrid) and installation type (bulk utility scale, behind-the-meter, front-of-the-meter, isolated). Distributed and hybrid systems can further enhance resilience benefits my maximizing resource potential for a locality. A case study demonstrating quantitative resilience benefits from wind alone is provided for St. Mary's, AK, which concludes that hundreds of thousands of dollars are saved by the addition of a wind turbine in the face of realistic fuel shortage and extreme winter weather scenarios.

17 WIND ENERGY↗

Physics-Informed Machine Learning for Predictive Turbulence Modeling: Towards a Complete Framework

Although increased availability of computational resources has enabled high-fidelity simulations (e.g., large eddy simulations) of turbulent flows, the Reynolds-Averaged Navier–Stokes (RANS) models are still the dominant tools in industrial applications. However, the predictive capabilities of RANS models are limited by large model-form discrepancies due to the Reynolds stress closure. Recently, a Physics-Informed Machine Learning (PIML) approach has been proposed to learn the functional form of Reynolds stress discrepancy in RANS simulations based on available data. It has been demonstrated that the learned discrepancy function can be used to improve Reynolds stresses in new flows where data are not available. However, due to a number of challenges, the improvements are only demonstrated in the Reynolds stress prediction but not in corresponding propagated quantities of interest (e.g., velocity field). In this work, we investigate the prediction performance on the velocity field by propagating the corrected Reynolds stresses in PIML approach. To enrich the input features, an integrity basis of invariants is implemented. The fully developed turbulent flow in a square duct is used as the test case. The discrepancy model is trained on flow fields from several Reynolds numbers and evaluated on a duct flow at a higher Reynolds number than any of the training cases. The predicted Reynolds stresses are propagated to velocity field via RANS equations. Numerical results show excellent predictive performances in both Reynolds stresses and their propagated velocities, demonstrating the merits of the PIML approach in predictive turbulence modeling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preliminary Workforce Development and Environmental and Co-use Management Plans for a Floating Offshore Wind Platform - CRADA 609 (Final Report)

Pacific Northwest National Laboratory (PNNL) provided technical assistance to Glosten, Inc. and its affiliate, PelaStar, LLC to advance the development of their floating offshore wind (FOSW) platform. PNNL provided guidance and assessment in two areas that are important to address in the development of FOSW platforms: (1) workforce development and (2) environmental impacts and ocean co-use considerations. This work was funded by the U.S. Department of Energy’s (DOE) Wind Energy Technologies Office (WETO) through Phase 2 of the FLoating Offshore Wind ReadINess (FLOWIN) Prize. It should be noted that the Plans presented in this report are specific to the PelaStar tension-leg platform (TLP) and may not be applicable to all FOSW platforms. Workforce development and environmental/co-use impacts are highly dependent on the geographical region in which activities take place. At the request of PelaStar, PNNL focused on two regions where development may take place: the Gulf of Maine and Northern California. PNNL generated a preliminary Workforce Development Plan for PelaStar, which includes estimated job numbers and skillsets required to establish a workforce to manufacture, install, and operate their platform as part of FOSW projects. The Plan offers methods to increase diversity, equity, and inclusion practices when developing a new workforce and includes colleges and training centers for potential recruitment. Both positive and negative impacts to communities are evaluated, with potential mitigation strategies for reducing negative impacts. The structure of Community Benefit Agreements and Project Labor Agreements are discussed, noting the limitations of the role of a platform manufacturer versus the offshore wind developer. PNNL also drafted a preliminary Environmental and Co-Use Management Plan that serves as a guide to preparing an environmental assessment related to the installation and operation of PelaStar’s unique TLP design, including its potential ecological, socioeconomic, and emissions impacts. The Plan summarizes information on relevant regulatory requirements, potential impact producing factors, monitoring and mitigation measures, and physical and biological resources in the Gulf of Maine and Northern California. One of the primary perceived benefits of the PelaStar TLP is its reduced footprint due to its tensioned tendons versus catenary or taut moorings, but more research must be done as there are no studies on PelaStar’s TLP system to-date. The section also highlights ocean co-use considerations for PelaStar’s TLP system, specifically for fisheries, including existing perspectives, methods, examples, and limitations. The PNNL team established through this preliminary work and review of available literature and resources that there is not yet much research or planning around FOSW. With FOSW being a new industry, many of the findings and planning are adapted from fixed bottom offshore wind, which itself is only just taking off in the United States. More research is needed to establish best practices for workforce development and to assess environmental and ocean co-use impacts and mitigation approaches.

17 WIND ENERGY↗

Energy Efficiency Resources to Support State Energy Planning

An early step for most energy efficiency planning is to identify and quantify energy savings opportunities, and then to understand how to access this potential. The U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy offers resources that can help with both of these steps. This fact sheet presents those resources. The resources are also available on the DOE State and Local Solution Center on the "Energy Efficiency: Savings Opportunities and Benefits" page: https://energy.gov/eere/slsc/energy-efficiency-savings-opportunities-and-benefits.

building energy codes↗

Carbon Storage Open Database

The Carbon Storage Open Database is a collection of spatial data obtained from publicly available sources published by several NATCARB Partnerships and other organizations. The carbon storage open database was collected from open-source data on ArcREST servers and websites in 2018, 2019, 2021, and 2022. The original database was published on the former GeoCube, which is now EDX Spatial, in July 2020, and has since been updated with additional data resources from the Energy Data eXchange (EDX) and external public data resources. The shapefile geodatabase is available in total, and has also been split up into multiple databases based on the maps produced for EDX spatial. These are topical map categories that describe the type of data, and sometimes the region for which the data relates. The data is separated in case there is only a specific area or data type that is of interest for download. In addition to the geodatabases, this submission contains: 1. A ReadMe file describing the processing steps completed to collect and curate the data. 2. A data catalog of all feature layers within the database. Additional published resources are available that describe the work done to produce the geodatabase: Morkner, P., Bauer, J., Creason, C., Sabbatino, M., Wingo, P., Greenburg, R., Walker, S., Yeates, D., Rose, K. 2022. Distilling Data to Drive Carbon Storage Insights. Computers & Geosciences. https://doi.org/10.1016/j.cageo.2021.104945 Morkner, P., Bauer, J., Shay, J., Sabbatino, M., and Rose, K. An Updated Carbon Storage Open Database - Geospatial Data Aggregation to Support Scaling -Up Carbon Capture and Storage. United States: N. p., 2022. Web. https://www.osti.gov/biblio/1890730 Morkner, P., Rose, K., Bauer, J., Rowan, C., Barkhurst, A., Baker, D.V., Sabbatino, M., Bean, A., Creason, C.G., Wingo, P., and Greenburg, R. Tools for Data Collection, Curation, and Discovery to Support Carbon Sequestration Insights. United States: N. p., 2020. Web. https://www.osti.gov/biblio/1777195 Disclaimer: This project was funded by the United States Department of Energy, National Energy Technology Laboratory, in part, through a site support contract. Neither the United States Government nor any agency thereof, nor any of their employees, nor the support contractor, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

carbon storage↗

NREL Planning Resources for States

This presentation summarizes some NREL resources and capabilities that states might want to access to help with decarbonization planning. It describes three types of resources: already-available, public datasets describing technology costs and future grid evolution; jurisdiction-specific integration studies that require directly partnering with NREL; and an envisioned new data product comprising state-specific standard scenarios that could be collaboratively funded by the states.

annual technology baseline↗

Phase identification using co‐association matrix ensemble clustering

Calibrating distribution system models to aid in the accuracy of simulations such as hosting capacity analysis is increasingly important in the pursuit of the goal of integrating more distributed energy resources. The recent availability of smart meter data is enabling the use of machine learning tools to automatically achieve model calibration tasks. This research focuses on applying machine learning to the phase identification task, using a co‐association matrix‐based, ensemble spectral clustering approach. The proposed method leverages voltage time series from smart meters and does not require existing or accurate phase labels. This work demonstrates the success of the proposed method on both synthetic and real data, surpassing the accuracy of other phase identification research.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Biomass co-firing technology with policies, challenges, and opportunities: A global review

The urgency of reducing Greenhouse Gas (GHG) emission is increasing and countries around the world have begun investing a substantial amount of resources into renewable energy sources. Biomass co-firing can have a very influential role in achieving this new energy target as it can reduce the potential environmental impacts associated with the combustion of fossil fuels. Greenhouse gases such as CO 2 , NO x , and SO x emissions can be reduced by replacing a portion of coal with biomass during co-firing. The purpose of this article is to review major policies that have promoted biomass co-firing around the world. Furthermore, this article investigates the existing co-firing plants with technologies and availability of biomass resources in different countries of the world. To conclude, this paper summarizes the major global biomass co-firing initiatives and the prospects of biomass co-firing in securing renewable energy target.

09 BIOMASS FUELS↗