Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RINGS - STRESSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Friction, wear and noise of slip ring and brush contacts for synchronous satellite use.

A program is being conducted for testing of slip rings for synchronous orbit application. Instrumentation systems necessary for monitoring electrical noise, friction, and brush wear at atmospheric pressure and at less than 50 ntorr have been developed. A multiplex scheme necessary for the simultaneous recording of brush displacement, friction, and electrical noise has also been developed. Composite brushes consisting of silver-molybdenum disulfide-graphite and silver-niobium diselenide-graphite have been employed on rings of coin silver and rhodium plate. Four contact combinations have been tested during an ambient condition run-in at 150 rpm and a humidity sequence at 0.1 rpm. The first six months of the two year vacuum test at 0.1 rpm have been completed. Electrical noise, friction and brush wear data recorded during these periods have been analyzed.

Lewis, N. E.↗
NASA NTRS1972

Ring baffle pressure distribution and slosh damping in large cylindrical tanks

An investigation was conducted to determine the pressure loads and damping associated with rigid ring baffles in relatively large cylindrical tanks. The radial and circumferential pressure distribution, as well as the damping, was measured on a ring baffle subjected to fundamental antisymmetric slosh in a 284-cm-diameter rigid tank. Experimental and analytical data are presented as a function of slosh velocity or amplitude, baffle spacing, and baffle locations both above and below the liquid surface. Results suggest that pressure distributions and damping values can be determined from available theories for the design of single and multiple baffle configurations.

Scholl, H. F.↗
NASA NTRS1972

A Multi-ring Ionospheric Plasma Probe

An ionospheric plasma probe was constructed which consists of a long cylinder with the end facing the flow closed by an end plate made up of multiple annular rings and a center disk. A theoretical argument is given which yields the plasma potential and electron temperature in terms of known plasma parameters and the currents to the various rings of the end plate. This probe was successfully operated in an ionospheric flow simulation facility and the resulting plasma potential is in excellent agreement with the traditional Langmuir analysis (1.22 volts).

Sheldon, J. W.↗
NASA NTRS1973

A theoretical analysis of the free vibrations of ring- and/or stringer-stiffened elliptical cylinders with arbitrary end conditions. Volume 1: Analytical derivation and applications

The derivation and application of a Rayleigh-Ritz modal vibration analysis are presented for ring and/or stringer stiffened noncircular cylindrical shells with arbitrary end conditions. Comparisons with previous results from experimental and analytical studies showed this method of analysis to be accurate for a variety of end conditions. Results indicate a greater effect of rings on natural frequencies than of stringers.

Boyd, D. E.↗
NASA NTRS1972

Development of a liquid metal slip ring

A liquid metal slip ring/solar orientation mechanism was designed and a model tested. This was a follow-up of previous efforts for the development of a gallium liquid metal slip ring in which the major problem was the formation and ejection of debris. A number of slip ring design approaches were studied. The probe design concept was fully implemented with detail drawings and a model was successfully tested for dielectric strength, shock vibration, acceleration and operation. The conclusions are that a gallium liquid metal slip ring/solar orientation mechanism is feasible and that the problem of debris formation and ejection has been successfully solved.

Weinberger, S. M.↗
NASA NTRS1972

The liquid metal slip ring experiment for the Communications Technology Satellite.

Description of an experiment designed to demonstrate liquid metal slip ring (LMSR) performance in a space environment. The experiment, based on currently developed LMSR technology, is to make possible an evaluation of those features of a LMSR where improvement in performance over conventional slip rings might be feasible. The experiment-prompting, potential LMSR advantages include: lower electrical noise, higher current capability, higher voltage capability, longer life, and small variation in friction torque.

Lovell, R. R.↗
NASA NTRS1973

Photometric properties of Saturn's rings.

The spectral reflectivity of Saturn's rings between 0.36 and 1.06 microns is derived from observations of the combined light of the Saturn system and the previously determined spectrum of the disk of Saturn. The rings are red relative to the Sun for wavelengths below 0.7 micron; at longer wavelengths, the spectral reflectivity declines. The amplitude of the opposition effect (anomalous brightening at very small phase angles) shows a maximum at both ends of our spectral range.

Irvine, W. M.↗
NASA NTRS1973

Friction, wear, and noise of slip ring and brush contacts for synchronous satellite use.

A program is being conducted for testing of slip rings for synchronous orbit application. Instrumentation systems necessary for monitoring electrical noise, friction, and brush wear at atmospheric pressure and at less than 50 nanotorr have been developed. A multiplex scheme necessary for the simultaneous recording of brush displacement, friction, and electrical noise has also been developed. Composite brushes consisting of silver-molybdenum disulfide-graphite and silver-niobium diselenide-graphite have been employed on rings of coin silver and rhodium plate. Brush property measurements made included measurement of density, electrical resistivity, shear strength, and microstructure.

Lewis, N. E.↗
NASA NTRS1973

Analysis of the partially filled viscous ring damper

A ring partially filled with a viscous fluid has been analyzed as a nutation damper for a spinning satellite. The fluid has been modelled as a rigid slug of finite length moving in a tube and resisted by a linear viscous force. It is shown that there are two distinct modes of motion, called the spin synchronous mode and the nutation synchronous mode. Time constants for each mode are obtained for both the symmetric and asymmetric satellite. The effects of a stop in the tube and an offset of the ring from the spin axis are also investigated. An analysis of test results is also given including a determination of the effect of gravity on the time constants in the two modes.

Alfriend, K. T.↗
NASA NTRS1974

Long-duration life tests of slip ring capsule assemblies for inertial guidance platforms

Eight slip ring capsules, each having 80 or 100 circuits, were operated for time periods ranging from 14,300 hours to 24,700 hours. The test mode simulated the motion of gimbal axes of the Saturn inertial guidance the platform in an organic free nitrogen environment. Computer-compiled noise data (approximately 45,000 recordings) were graphed as a function of test time and position within the capsules and as extreme probability distributions. Greater than ninety-nine percent of the noise measurements for the capsules with sufficient lubrication were less than 10 milliohms. Capsules with glass dielectrics did not perform significantly differently than those with filled epoxy dielectrics. The initial wear mode of prow formation was followed by rider wear. After 10 to the 8th power wipes, ring wear depth did not exceed the surface finish and the radial rider wear depth was less than 13 microns.

Cole, S. R.↗
NASA NTRS1973

Theory of a ring laser

Development of a systematic formulation of the theory of a ring laser which is based on first principles and uses a well-known model for laser operation. A simple physical derivation of the electromagnetic field equations for a noninertial reference frame in uniform rotation is presented, and an attempt is made to clarify the nature of the Fox-Li modes for an open polygonal resonator. The polarization of the active medium is obtained by using a Fourier-series method which permits the formulation of a strong-signal theory, and solutions are given in terms of continued fractions. It is shown that when such a continued fraction is expanded to third order in the fields, the familiar small-signal ring-laser theory is obtained.

Menegozzi, L. N.↗
NASA NTRS1973

A Saturnian gas ring and the recycling of Titan's atmosphere

Atoms which escape Titan's atmosphere are unlikely to possess escape velocity from Saturn and can orbit the planet until lost by ionization or collision with Titan. It is predicted that a toroidal ring of between 1 and 1,000 atoms or molecules per cubic centimeter exists around Saturn at a distance of about 10 times the radius of the visible rings. This torus may be detectable from earth orbit and detection or nondetection of it may provide some information about the presence or absence of a Saturnian magnetic field, and the exospheric temperature and atmospheric escape rate of Titan. It is estimated that, if Titan has a large exosphere, 97% or more of the escaping atoms can be recaptured by Titan, thereby decreasing the effective net atmospheric loss rate by up to two orders of magnitude. It is shown that, if Saturn has a magnetic field comparable to Jupiter's the magnetospheric plasma can supply Titan with hydrogen at a rate comparable to the loss rates in some of the models of Trafton (1972) and Sagan (1973).

Mcdonough, T. R.↗
NASA NTRS1974

Thermal emission of Saturn's rings and disk at 34 microns

The relative thermal emission from the rings and disk of Saturn in the band from 29 to 43 micrometers has been measured with the aid of ground-based observations in which new filter techniques were used. The new data provide an important constraint for separating the thermal properties of Saturn from those of its rings. The results reported support previous suggestions of a large internal heat source for Saturn.

Nolt, I. G.↗
NASA NTRS1974

Protons as the prime contributors to the storm time ring current

Following a large magnetic storm (17 June 1972), Explorer 45 measured the equatorial particle populations and magnetic field. Using data obtained during the symmetic recovery phase, it is shown that through a series of self-consistent calculations, the measured protons with energies from 1 to 872 keV, can account for the observed ring current magnetic effects within experimental uncertainities. This enables an upper limit to be set for the heavy ion contribution to the storm time ring current.

Berko, F. W.↗
NASA NTRS1974

Impact of Saturn's rings on mission analysis for MJS 77

Mariner Jupiter-Saturn '77 mission objectives for Saturn are considered which affect the trajectory design and in particular the aim point at Saturn. These objectives include the following: (1) earth, sun occulation of Saturn, rings, and satellites; (2) close as possible to surface; (3) close as possible to rings; (4) close encounter with Titan (approximately 20,000 km); (5) close encounter with lapetus; (6) multiple satellite encounters; (7) post-Saturn trajectory to Uranus; and (8) post-Saturn trajectory toward solar apex.

Penzo, P. A.↗
NASA NTRS1974

Variations in the infrared brightness temperature of Saturn's rings

After adjusting for the decreased Sun-Saturn distance and adjusting all measurements to B ring values only, it is shown that the temperature variations are not as large as was thought. Various models of the multilayer agglomerate of particles of Saturn's rings are evaluated. It is recommended that the difference between the 11 and 20 micron brightness temperatures should be explained by a satisfactory model.

Murphy, R. E.↗
NASA NTRS1974

Estimates of the size of particles in Saturn's rings and their cosmogonic implications

Near infrared ice band measurements, radar and radio observations, and implications of the size estimates of particles in Saturn's rings are discussed. The measurements are compared to the Poynting-Robetson effect and a possible mechanism by which the size of the particles may significantly change after the initial formulation of the material in the rings is proposed.

Pollack, J. B.↗