Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

A quantum phase transition in a quantum external field: Superposing two magnetic phases

We study an Ising chain undergoing a quantum phase transition in a quantum magnetic field. Such a field can be emulated by coupling the chain to a central spin initially in a superposition state. We show that – by adiabatically driving such a system – one can prepare a quantum superposition of any two ground states of the Ising chain. In particular, one can end up with the Ising chain in a superposition of ferromagnetic and paramagnetic phases – a scenario with no analogue in prior studies of quantum phase transitions. Remarkably, the resulting magnetization of the chain encodes the position of the critical point and universal critical exponents, as well as the ground state fidelity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Q CMOS-integrated photonic crystal microcavity devices

Integrated optical resonators are necessary or beneficial in realizations of various functions in scaled photonic platforms, including filtering, modulation, and detection in classical communication systems, optical sensing, as well as addressing and control of solid state emitters for quantum technologies. Although photonic crystal (PhC) microresonators can be advantageous to the more commonly used microring devices due to the former’s low mode volumes, fabrication of PhC cavities has typically relied on electron-beam lithography, which precludes integration with large-scale and reproducible CMOS fabrication. Here, we demonstrate wavelength-scale polycrystalline silicon (pSi) PhC microresonators with Qs up to 60,000 fabricated within a bulk CMOS process. Quasi-1D resonators in lateral p-i-n structures allow for resonant defect-state photodetection in all-silicon devices, exhibiting voltage-dependent quantum efficiencies in the range of a few 10 s of %, few-GHz bandwidths, and low dark currents, in devices with loaded Qs in the range of 4,300–9,300; one device, for example, exhibited a loaded Q of 4,300, 25% quantum efficiency (corresponding to a responsivity of 0.31 A/W), 3 GHz bandwidth, and 30 nA dark current at a reverse bias of 30 V. This work demonstrates the possibility for practical integration of PhC microresonators with active electro-optic capability into large-scale silicon photonic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Femtosecond laser pulse driven melting in gold nanorod aqueous colloidal suspension: Identification of a transition from stretched to exponential kinetics

Many potential industrial, medical, and environmental applications of metal nanorods rely on the physics and resultant kinetics and dynamics of the interaction of these particles with light. We report a surprising kinetics transition in the global melting of femtosecond laser-driven gold nanorod aqueous colloidal suspension. At low laser intensity, the melting exhibits a stretched exponential kinetics, which abruptly transforms into a compressed exponential kinetics when the laser intensity is raised. It is found the relative formation and reduction rate of intermediate shapes play a key role in the transition. Supported by both molecular dynamics simulations and a kinetic model, the behavior is traced back to the persistent heterogeneous nature of the shape dependence of the energy uptake, dissipation and melting of individual nanoparticles. These results could have significant implications for various applications such as water purification and electrolytes for energy storage that involve heat transport between metal nanorod ensembles and surrounding solvents.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Flexible and High Performance Supercapacitors Based on NiCo2O4for Wide Temperature Range Applications

Binder free nanostructured NiCo 2 O 4 were grown using a facile hydrothermal technique. X-ray diffraction patterns confirmed the phase purity of NiCo 2 O 4 . The surface morphology and microstructure of the NiCo 2 O 4 analyzed by scanning electron microscopy (SEM) showed flower-like morphology composed of needle-like structures. The potential application of binder free NiCo 2 O 4 as an electrode for supercapacitor devices was investigated using electrochemical methods. The cyclic voltammograms of NiCo2O4 electrode using alkaline aqueous electrolytes showed the presence of redox peaks suggesting pseudocapacitance behavior. Quasi-solid state supercapacitor device fabricated by sandwiching two NiCo 2 O 4 electrodes and separating them by ion transporting layer. The performance of the device was tested using cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy. The device showed excellent flexibility and cyclic stability. The temperature dependent charge storage capacity was measured for their variable temperature applications. Specific capacitance of the device was enhanced by ~150% on raising the temperature from 20 to 60°C. Hence, the results suggest that NiCo 2 O 4 grown under these conditions could be a suitable material for high performance supercapacitor devices that can be operated at variable temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics simulations reveal that water diffusion between graphene oxide layers is slow

Membranes made of stacked layers of graphene oxide (GO) hold the tantalizing promise of revolutionizing desalination and water filtration if selective transport of molecules can be controlled. We present the findings of a molecular dynamics simulation study of water intercalated between GO layers that have a C/O ratio of 4. We simulated a range of hydration levels from 1 wt.% to 23.3 wt.% water. The interlayer spacing increased upon hydration from 0.8 nm to 1.1 nm. We also synthesized GO membranes that showed an increase in spacing from about 0.7 nm to 0.8 nm and an increase in mass of about 14% on hydration. Water diffusion through GO layers is an order of magnitude slower than that in bulk water, because of strong hydrogen bonded interactions. Most of the water molecules are bound to OH groups even at the highest hydration level. We observed large water clusters that could span graphitic regions, oxidized regions and holes that have been experimentally observed in GO. As a result, slow interlayer diffusion can be consistent with experimentally observed water transport in GO if holes lead to a shorter path length than previously assumed and sorption serves as a key rate-limiting step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Performance and Flexible Supercapacitors based on Carbonized Bamboo Fibers for Wide Temperatre Applications

High performance carbonized bamboo fibers were synthesized for a wide range of temperature dependent energy storage applications. The structural and electrochemical properties of the carbonized bamboo fibers were studied for flexible supercapacitor applications. The galvanostatic charge-discharge studies on carbonized fibers exhibited specific capacity of ~510F/g at 0.4A/g with energy density of 54Wh/kg. Interestingly, the carbonized bamboo fibers displayed excellent charge storage stability without any appreciable degradation in charge storage capacity over 5,000 charge-discharge cycles. The symmetrical supercapacitor device fabricated using these carbonized bamboo fibers exhibited an areal capacitance of ~1.55F/cm2 at room temperature. In addition to high charge storage capacity and cyclic stability, the device showed excellent flexibility without any degradation to charge storage capacity on bending the electrode. The performance of the supercapacitor device exhibited ~65% improvement at 70°C compare to that at 10°C. Our studies suggest that carbonized bamboo fibers are promising candidates for stable, high performance and flexible supercapacitor devices.

25 ENERGY STORAGE↗

Probing local structure in the yellow phosphor LaSr[subscript 2]AlO[subscript 5]:Ce[superscript 3+], by the maximum entropy method and pair distribution function analysis

The compound LaSr{sub 2}AlO{sub 5} was recently introduced as a competitive Ce{sup 3+} host material for blue-pumped yellow phosphors for use in white light emitting diodes. A crucial feature of the crystal structure of LaSr{sub 2}AlO{sub 5} is that La, which is the host site for Ce{sup 3+}, is located in the 8h positions of the I4/mcm crystal structure, a site equally shared with Sr. While the average crystal structure of LaSr{sub 2}AlO{sub 5} as revealed by Rietveld analysis of laboratory and synchrotron X-ray diffraction data suggests nothing untoward, maximum entropy method analysis of the synchrotron X-ray data reveals the existence of conspicuous non-sphericity of the electron density. Pair distribution function analysis of the data suggests that despite their occupying the same crystallographic site, La and Sr possess distinct coordination environments, and the environment around La is more compact and regular than the environment suggested by the Rietveld refinement of the average structure. The absorption and emission from Ce{sup 3+} centers is controlled by the local coordination and symmetry, and the use of powerful new tools in unraveling details of these strengthens the rational search for new phosphors for solid state white lighting.

36 MATERIALS SCIENCE↗

Modeling and Simulation of Nuclear Fuel Materials

We review the state of modeling and simulation of nuclear fuels with emphasis on the most widely used nuclear fuel, UO2. The hierarchical scheme presented represents a science-based approach to modeling nuclear fuels by progressively passing information in several stages from ab initio to continuum levels. Such an approach is essential to overcome the challenges posed by radioactive materials handling, experimental limitations in modeling extreme conditions and accident scenarios, and the small time and distance scales of fundamental defect processes. When used in conjunction with experimental validation, this multiscale modeling scheme can provide valuable guidance to development of fuel for advanced reactors to meet rising global energy demand.

multiscale modeling↗

Radiation tolerance of ceramics—Insights from atomistic simulation of damage accumulation in pyrochlores

We have used molecular dynamics simulations to examine the effects of radiation damage accumulation in two pyrochlore-structured ceramics, namely Gd2Ti2O7 and Gd2Zr2O7. It is well known from experiment that the titanate is susceptible to radiation-induced amorphization, while the zirconate does not go amorphous under prolonged irradiation. Our simulations show that cation Frenkel pair accumulation eventually leads to amorphization of Gd2Ti2O7. Anion disorder occurs with cation disorder. The amorphization is accompanied by a density decrease of about 12.7% and a decrease of about 50% in the elastic modulus. In Gd2Zr2O7, amorphization does not occur, because the residual damage is not sufficiently energetic to drive the material amorphous. Subtle differences in damage accumulation and annealing between the two pyrochlores lead to drastically different radiation response as the damage accumulates.

ceramic↗

Preparation, magnetism and electronic structures of cadmium technetates

Due to the scarcity of the artificial transition metal technetium, studies on the solid-state properties of its oxides have been rarely undertaken. We have prepared a new technetium metal oxide system that include the 4d metal in two separate oxidation states and have characterized the new phases' crystal structures and magnetic properties. One phase Cd{sub 2}Tc{sub 2}O{sub 7} was prepared through the vapor-phase reaction of the heptaoxide Tc{sub 2}O{sub 7} with Cd metal; the other phase, CdTcO{sub 3}, was prepared through the solid state reaction of TcO{sub 2} with CdO. High-resolution synchrotron X-ray diffraction was used to characterize the crystal structures and stoichiometries of the two new technetates. At room temperature, Cd{sub 2}Tc{sub 2}O{sub 7} takes on the pyrochlore structure with a = 10.18118(1) {angstrom}, space group, Fd{bar 3}m and Z = 8. CdTcO{sub 3} has the GdFeO{sub 3}-type structure with space group Pbnm and a = 5.38881(1) {angstrom}, b = 5.46504(1) {angstrom}, and c = 7.71272(1){angstrom}. The magnetic susceptibility behavior of Cd{sub 2}Tc{sub 2}O{sub 7} is strikingly similar to that observed in Cd{sub 2}Re{sub 2}O{sub 7}, with a broad transition close to 200 K. The magnetic behavior of Cd{sub 2}Tc{sub 2}O{sub 7} is also compared with that of isomorphous Pb{sub 2}Tc{sub 2}O{sub 6} and Bi{sub 2}Tc{sub 2}O{sub 7}, also presented in this study. The magnetic susceptibility of the distorted perovskite phase CdTcO{sub 3} is weakly temperature dependent, with no obvious signs of an ordering transition below 300 K. Electronic band structure calculations performed to simulate electronic densities of states indicate that the Fermi level is located in a 't{sub 2g}' band of the octahedrally coordinated Tc cations and therefore metallic conductivity in both CdTcO{sub 3} and Cd{sub 2}Tc{sub 2}O{sub 7}.

36 MATERIALS SCIENCE↗

A protected annealing strategy to enhanced light emission and photostability of YAG:Ce nanoparticle-based films

A significant obstacle in the development of YAG:Ce nanoparticles as light converters in white LEDs and as biological labels is associated with the difficulty of finding preparative conditions that allow simultaneous control of structure, particle size and size distribution, while maintaining the optical properties of bulk samples. Preparation conditions frequently involve high-temperature treatments of precursors (up to 1400 C), which result in increased particle size and aggregation, and lead to oxidation of Ce(III) to Ce(IV). We report here a process that we term protected annealing, that allows the thermal treatment of preformed precursor particles at temperatures up to 1000 C while preserving their small size and state of dispersion. In a first step, pristine nanoparticles are prepared by a glycothermal reaction, leading to a mixture of YAG and boehmite crystalline phases. The preformed nanoparticles are then dispersed in a porous silica. Annealing of the composite material at 1000 C is followed by dissolution of the amorphous silica by hydrofluoric acid to recover the annealed particles as a colloidal dispersion. This simple process allows completion of YAG crystallization while preserving their small size. The redox state of Ce ions can be controlled through the annealing atmosphere. The obtained particles of YAG:Ce (60 {+-} 10 nm in size) can be dispersed as nearly transparent aqueous suspensions, with a luminescence quantum yield of 60%. Transparent YAG:Ce nanoparticle-based films of micron thickness can be deposited on glass substrates using aerosol spraying. Films formed from particles prepared by the protected annealing strategy display significantly improved photostability over particles that have not been subject to such annealing.

36 MATERIALS SCIENCE↗

Insight from molecular modelling: does the polymer side chain length matter for transport properties of perfluorosulfonic acid membranes?

We present a detailed analysis of the nanostructure of short side chain (SSC) perfluorosulfonic acid membrane and its effect on H{sub 2}O network percolation, H{sub 3}O{sup +} and H{sub 2}O diffusion, and mean residence times of H{sub 3}O{sup +} and H{sub 2}O near SO{sub 3}{sup -} groups based on molecular dynamics simulations. We studied a range of hydration levels ({lambda}) at temperatures of 300 and 360 K, and compare the results to our previous findings in the benchmark Nafion membrane at 300 K. The water channel diameter is about 20% larger in Nafion, while the extent of SO3- clustering is more in SSC membrane. The calculated channel diameter is in excellent agreement with the recently proposed cylindrical water channel model of these membranes. The H{sub 2}O network percolation occurs at comparable hydration levels, and the diffusion coefficients of H{sub 2}O and H{sub 3}O{sup +} are similar in SSC and Nafion membranes. Raising the temperature of the SSC membrane from 300 to 360 K provides a much bigger increase in proton vehicular diffusion coefficient (by a factor of about 4) than changing the side chain length. H3O+ ions are found to exchange more frequently with SO{sub 3}{sup -} partners at the higher temperature. Our key findings are that (a) the hydrophobic-hydrophilic separation in the two membranes is surprisingly similar; (b) at all hydration levels studied, the longer side chain of Nafion is bent and is effectively equivalent to a short side chain in terms of extension into the water domain; and (c) proton transport along the centre of the channel is improbable and vehicular proton transport occurs between SO{sub 3}{sup -} groups. The simulations are validated by good agreement with corresponding experimental values for the simulated membrane density and diffusion coefficients of H{sub 2}O.

30 DIRECT ENERGY CONVERSION↗

Rapid microwave-assisted sol-gel preparation of Pd-substituted LnFeO 3 (Ln = Y, La): phase formation and catalytic activity

We present a rapid microwave-assisted sol–gel approach to Pd-substituted LnFeO 3 (Ln = Y, La) for applications in C–C coupling reactions. These materials could be prepared in household microwave ovens in less than 15 minutes of reaction time with the final materials displaying well-defined structure and morphology. Phase evolution was studied using time-dependent microwave heatings and then compared with the results obtained from thermogravimetric analyses. Materials were confirmed to be phase pure by laboratory and synchrotron X-ray diffraction. Substituted Pd is ionic as shown by the binding energy shift from X-ray photoelectron spectroscopy. The short heating periods required for phase purity allow these materials less time for sintering as compared to conventional solid state preparation methods, making relatively high surface areas achievable. These materials have been successfully used as catalyst precursor materials for C–C coupling reactions in which the active species is Pd 0 . Pd-substituted LnFeO 3 (Ln = Y, La) provides Pd 0 in solution which can be complexed by the ligand SPhos, allowing for aryl chloride coupling.

Misch, Lauren M.↗

Structure-composition relationships and optical properties in cerium-substituted (Sr,Ba) 3 (Y,La)(BO 3 ) 3 borate phosphors

Relationships between the structure and composition, and their influence on the optical properties, of a family of cerium-substituted borate compounds with formula A 3 RE(BO 3 ) 3 (A = Ba, Sr; RE = Y, La) are studied using a combination of high resolution synchrotron X-ray powder diffraction and photoluminescence. Examination of the coordination environment of the Ce 3+ active site polyhedra coupled with photoluminescence at 77 K reveal three distinct excitation bands corresponding to Ce 3+ located on three distinct crystallographic sites. Comparing the position of these excitation bands with crystal field splitting effects due to changes in polyhedral volumes and distortions suggest an assignment of the three excitation bands. These compounds are efficiently excited by UV light (≈340 nm) with blue emission at a maximum wavelength of 413 nm for Ba 3 Y(BO 3 ) 3 :Ce 3+ ,Na + , 422 nm for Sr 3 Y(BO 3 ) 3 :Ce 3+ ,Na + , and 440 nm for Sr 3 La(BO 3 ) 3 :Ce 3+ ,Na + . The most efficient compound was determined to be Sr3La(BO 3 ) 3 :Ce 3+ ,Na + with a quantum yield of 50%.

Denault, Kristin A.↗

Activity–stability relationship in the surface electrochemistry of the oxygen evolution reaction

Understanding the functional links between the stability and reactivity of oxide materials during the oxygen evolution reaction (OER) is one key to enabling a vibrant hydrogen economy capable of competing with fossil fuel-based technologies. In this work, by focusing on the surface chemistry of monometallic Ru oxide in acidic and alkaline environments, we found that the kinetics of the OER are almost entirely controlled by the stability of the Ru surface atoms. The same activity–stability relationship was found for more complex, polycrystalline and single-crystalline SrRuO 3 thin films in alkaline solutions. We propose that the electrochemical transformation of either water (acidic solutions) or hydroxyl ions (alkaline solutions) to di-oxygen molecules takes place at defect sites that are inherently present on every electrode surface. During the OER, surface defects are also created by the corrosion of the Ru ions. The dissolution is triggered by the potential-dependent change in the valence state ( n ) of Ru: from stable but inactive Ru 4+ to unstable but active Ru n >4+ . We conclude that if the oxide is stable then it is completely inactive for the OER. As a result, a practical consequence is that the best materials for the OER should balance stability and activity in such a way that the dissolution rate of the oxide is neither too fast nor too slow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗