Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power consistency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Design, Operation, and Controlled-Island Operation of the U.S. Department of Energy Solar Decathlon 2013 Microgrid

This document reports on the design and operation of a high-capacity and high-penetration-ratio microgrid, which consists of 19 photovoltaic-powered residential houses designed by collegiate teams as part of their participation in the U.S. Department of Energy Solar Decathlon 2013. The microgrid was interconnected with the local utility, and resulting net-power and power-quality events were recorded in high detail (1-minute data sampling or better). Also, a controlled-island operation test was conducted to evaluate the microgrid response to additional events such as increased loads (e.g., from electric vehicles) and bypassing of voltage regulators. This temporary ground-laid microgrid was stable under nominal and island-operation conditions; adverse weather and loads did not lead to power-quality degradation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effects of EMF Emissions from Cables and Junction Boxes on Marine Species

Studies have shown that diverse aquatic species are electrosensitive. Many fishes, and marine mammals, can either detect, navigate by, or are affected by electromagnetic fields (EMF) with various sensitivities, and their behavior may be impacted by unnatural EMF emissions in the water column. Sharks, rays and skates are known to have the highest sensitivity to electric fields. Electric field emissions in the range 0.5–100 micro volt/m appear to attract them, and emissions over 100 micro volt/m to repulse them. A marine hydrokinetic MHK device will have multiple components and associated multiple submarine cables on the seafloor and running through the water column and would potentially increase the level of EMF emissions to which the marine species at the site may be exposed to. There are therefore concerns amongst stakeholders that EMF emissions associated with MHK devices and their components may act as barriers to species migration, cause disorientation, change community compositions and ecosystems, and that they may attract sharks, leading to a local increase in the risk of shark attacks. However, field data to validate and model potential relationships between observed responses and the EMF emissions in situ are sparse. A program of experimental field surveys were conducted off the coast of South Florida, USA to characterize the electromagnetic field (EMF) emissions in the water column from a submarine cable, and to monitor for responses of local aquatic species. The field surveys were conducted at the South Florida Ocean Measurement Facility (SFOMF) off Fort Lauderdale, which is a cabled offshore in-water navy range. It consists of multiple active submarine power cables and a number of junction boxes, with the capability to transmit AC/DC power at a range of strength and frequencies. The site includes significant marine life activities and community structure, including highly mobile species, such as sharks, stingrays, mammals and turtles. SFOMF therefore typifies a setting representative of an offshore location where a MHK device may be sited. Background electromagnetic field (EMF) levels and EMF emissions due to submarine cables were measured using a custom E-field sensor and a commercial magnetometer deployed from an autonomous underwater vehicle (AUV) at various fixed altitudes above the seafloor. EMF signatures detected from power cables and junction boxes are contrasted against ambient background levels and other EMF sources. The potential responses of local marine species were observed at selected representative locations using divers on SCUBA, complemented with fixed cameras on the sea bottom and by a set of video cameras mounted on the AUV. The objectives of the study were: 1) to characterize the EMF emission levels associated with submarine cables 2) to monitor potential responses of aquatic animals to the emissions and 3) to develop an associated database of field observations. As control, observations of EMF levels and in situ marine species were conducted with power in the cable turned off. Good quality measurements of EMF emissions were obtained using the mobile AUV platform and the data from the surveys were used to develop contour maps of the EMF levels in the water column above the live cable as well as to provide information about how the field decays away from the cable. The measurements show good agreement with theoretical models of the how EMF levels decay away from the cable in deep and shallow water environment. Electric fields in excess of 200µV/m were measured in the vicinity of the cable during the power on state. Quarterly surveys by SCUBA divers were conducted, using point and transect count methods, over a period of one year at three locations, one at a shallow site where the water depth is approximately 5m, and the other at the Barracuda Reef where the water depth is approximately 10m. The sampling results were analyzed to determine if the presence of an SFOMF generated EMF alters: (1) abundance, species richness, and assemblage structure of coral reef fishes, (2) the behavior of fishes including elasmobranchs, and (3) the distribution of marine turtles and mammals. Diver observations were also used in attempt to discern if there were any noticeable organismal responses during the transitional period between ambient OFF to energized AC or DC power states, and video footage was intended to augment the in-situ visual survey data and aid in interpretation of the results. Comparisons are provided between observation datasets between the three sites and between the point and transect count methods. Presence of several individual elasmobranch species, including sharks and stingrays, were recorded during the surveys. No apparent effect on richness could be discerned between the power on and off states. No apparent sudden animal movements were observed during transitions between power states.

16 TIDAL AND WAVE POWER↗

Energy Efficient Thermoplastic Composite Manufacturing

The objective of the project was to establish an effective and affordable method to lay-up and consolidate/join large thermoplastic composite aerospace structure with cycle times measured in minutes rather than hours. Composite airplane designs have proven efficient and effective however future potential product production rates are challenging what the current systems can efficiently produce due to material lay-down constraints and extended thermal cycle times. The ability to lay-up then rapidly heat, consolidate, and cool large complex composite structures plus very accurately tool them (i.e. matching CTE of composite materials) along with very precise thermal control is a difficult challenge. Current systems such as autoclave processing of thermoset materials require long cycle times due to method of heating and the large associated thermal masses. These extended cycle times inhibit the ability to meet higher rate production scenarios due to the need for multiple sets of equipment and tools. Thermoplastic composite materials were used to facilitate more rapid cycle times via the elimination of a need for a cure dwell at temperature. Also, utilized induction heating along with smart susceptors to enable the quick cycle times needed while providing precise intrinsic thermal control. The intrinsic control of the induction heating process via the smart susceptors along with the use of laser assisted fiber placement were the key innovations areas developed. The ability to rapidly heat and then precisely control the temperature of the consolidation component was paramount to the success of this project. It is this unique processing attribute coupled with the thermoplastic material characteristics along with rapid lay-up methods that are novel and advantageous. While many requirements and influencing factors decide the materials and processes utilized for future airplane construction, the forecast of accelerated production rates and the recent performance successes of composites in airplane construction provide an opportunity for this processing technology to have significant influence. During the course of this project a number of key accomplishments were completed. They are as follows: The needed laser assisted fiber placement capabilities have been developed and validated on a component of meaningful scale and complexity. Subsequently, a thermoplastic preform of the part scale-up part design was laser assisted fiber placed and made availalbe for consolidation. An induction consolidation system was sized, designed, and fabricated resulting in the full capability to consolidate the scale-up component. The tool for induction consolidating of the scale-up component was designed and fabricated. An aluminum pressure bladder was welded and formed for use as the pressurization membrane to perform the needed application of pressure on the part at temperature to achieve consolidation. The induction consolidation system consisting of the restraint, induction power supply, induction tool with integrated induction coils and smart susceptor liners, along with the aluminum bladder were successfully used to consolidate a large thermoplastic skin. The capability of accomplishing rapid heat-up rates and cool down rates for consolidation of large thermoplastic skins with precise thermal control and even pressure application at the consolidation temperature was validated. The general conclusion is that the use of induction consolidation with smart susceptors is an effective method to rapidly and efficiently consolidate large thermoplastic composite components and enable affordable high rate manufacturing of composites. More specific conclusions generated by this project are as follows: A restraint type induction consolidation system provides an affordable option over the standard press when using the induction consolidation processing method. Aluminum bladders can be formed to the complex shapes needed and supply uniform pressure for consolidation and co-consolidation of thermoplastic composite materials. Straightforward modifications can be made to existing fiber placement robotic systems to enable their use for thermoplastic lay-up applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

High operating temperature heat transfer fluids for solar thermal power generation. Final report

This is the final technical report for the DOE MURI project on developing high-operating temperature heat transfer fluids for solar thermal power generation. This project aimed to evaluate liquid metals as a heat-transport fluid and potential energy storage medium for concentrated solar powered (CSP) systems. The project consisted of five phases, starting with fluid selection and screen and ending with potential CSP integration. The initial fluid selection arrived at heavy liquid metals as candidate fluids such as lead bismuth eutectic (LBE) as the prime liquid-alloy candidate to be studied, given the conditions above. Fifty-seven liquid compositions were initially identified with liquidus temperatures lower than 200°C, composed of elements that provide no driving force to the reduction of Cr 2 O 3 or Al 2 O 3 passivation layers in pipe material which is required for corrosion prevention. LBE was identified as the primary candidate fluid after these compositions were compared against computational thermodynamic modeling to screen all of the selected systems that would be compatible with our design objectives. Twenty-eight of these compositions were also investigated with the rapid characterization methods; the accuracies of the liquidus temperature and the specific heats predicted by the computations were better than 3 percent and 9 percent, respectively. We conducted numerus corrosion tests of various Fe-Cr-Al based steels in LBE and its variants at temperate as high as 800°C. It was found that minor additions to the liquid did not provide sufficient corrosion protection to warrant their use in real applications. Furthermore, we investigated the detailed mechanism of corrosion between heavy liquid metal and the pipe material at these very high temperatures. A liquid metal loop was constructed to operate at these high temperatures. The loop construction and operation lead to valuable lessons learned that will be needed for industrial scale loops. Furthermore, we learned that electromagnetic pumps at these extreme temperatures will have to be reengineered and redesigned to be used for CSP applications.

14 SOLAR ENERGY↗

Ultra-High Operation Temperature SiC-matrix Solar Thermal Air Receiver (HOTSSTAR) enabled by additive manufacturing: Test Facility & Performance Evaluations

Solar Heat for Industrial Processes (SHIP) cavity receivers are capable of generating electricity or industrial process heat by absorbing thermal energy from solar radiation, focused on a small area. The concentration of solar radiation on the small area of the receiver enables the achievement of high temperatures (ranging from 400°C to 1,100°C) of a working fluid, thus making the SHIP technology thermodynamically comparable with conventional power plants. A volumetric receiver consists of a porous structure-generally made of silicon carbide or metal, which absorbs solar radiation and converts it into heat energy. Heat energy from the porous materials is then transferred to the fluid following through them. A volumetric receiver acts as a convective heat exchanger, transferring heat to the fluid through convection. Open-loop volumetric receivers work with air at atmospheric pressure and are suitable for single-cycle or multi-cycle energy plants. A Model Based Systems Engineering (MBSE) approach was used to develop a test bed at Sandia national Laboratories (SNL) capable of demonstrating an open-loop volumetric air receiver developed by General Electric Aerospace (GE Aerospace). This paper presents the development of the various MBSE methods, test bed, and testing operations for the GE air receiver, which was experimentally demonstrated to achieve 1,350°C for over 3 hours of operation and an approximate 70% receiver efficiency. By being able to achieve such high temperatures >1,000°C, this work provides the potential to support many SHIP industrial use cases.

14 SOLAR ENERGY↗

FREELY DECAYING TURBULENCE IN FORCE-FREE ELECTRODYNAMICS

Freely decaying, relativistic force-free turbulence is studied for the first time. We initiate the magnetic field at a short wavelength and simulate its relaxation toward equilibrium on two- and three-dimensional periodic domains in both helical and nonhelical settings. Force-free turbulent relaxation is found to exhibit an inverse cascade in all settings and in three dimensions to have a magnetic energy spectrum consistent with the Kolmogorov 5/3 power law. Three-dimensional relaxations also obey the Taylor hypothesis; they settle promptly into the lowest-energy configuration allowed by conservation of the total magnetic helicity. However, in two dimensions, the relaxed state is a force-free equilibrium whose energy greatly exceeds the Taylor minimum and that contains persistent force-free current layers and isolated flux tubes. We explain this behavior in terms of additional topological invariants that exist only in two dimensions, namely the helicity enclosed within each level surface of the magnetic potential function. The speed and completeness of turbulent magnetic free-energy discharge could help account for rapidly variable gamma-ray emission from the Crab Nebula, gamma-ray bursts, blazars, and radio galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Herschel Photometric Observations of Little Things Dwarf Galaxies

We present here far-infrared photometry of galaxies in a sample that is relatively unexplored at these wavelengths: low-metallicity dwarf galaxies with moderate star formation rates. Four dwarf irregular galaxies from the Little Things survey are considered, with deep Herschel PACS and SPIRE observations at 100, 160, 250, 350, and 500 μm. Results from modified blackbody fits indicate that these galaxies have low dust masses and cooler dust temperatures than more actively star-forming dwarfs, occupying the lowest L {sub TIR} and M {sub dust} regimes seen among these samples. Dust-to-gas mass ratios of ∼10{sup −5} are lower, overall, than in more massive and active galaxies but are roughly consistent with the broken power-law relation between the dust-to-gas ratio and metallicity found for other low-metallicity systems. Chemical evolution modeling suggests that these dwarf galaxies are likely forming very little dust via stars or grain growth and have very high dust destruction rates.

47 OTHER INSTRUMENTATION↗

NuSTAR and Swift Observations of the Ultraluminous X-Ray Source IC 342 X-1 in 2016: Witnessing Spectral Evolution

We report on an X-ray observing campaign of the ultraluminous X-ray source IC 342 X-1 with NuSTAR and Swift in 2016 October, in which we captured the very moment when the source showed spectral variation. The Swift/XRT spectrum obtained in October 9–11 has a power-law shape and is consistent with those observed in the coordinated XMM-Newton and NuSTAR observations in 2012. In October 16–17, when the 3–10 keV flux became ≈4 times higher, we performed simultaneous NuSTAR and Swift observations. In this epoch, the source showed a more round-shaped spectrum like that seen with ASCA 23 years ago. Thanks to the wide energy coverage and high sensitivity of NuSTAR , we obtained hard X-ray data covering up to ∼30 keV for the first time during the high-luminosity state of IC 342 X-1. The observed spectrum has a broader profile than the multi-color disk blackbody model. The X-ray flux decreased again in the last several hours of the NuSTAR observation, when the spectral shape approached those seen in 2012 and 2016 October 9–11. The spectra obtained in our observations and in 2012 can be commonly described with disk emission and its Comptonization in cool ( T {sub e} ≈ 4 keV), optically thick ( τ ≈ 5) plasma. The spectral turnover seen at around 5–10 keV shifts to higher energies as the X-ray luminosity decreases. This behavior is consistent with that predicted from recent numerical simulations of super-Eddington accretion flows with Compton-thick outflows. We suggest that the spectral evolution observed in IC 342 X-1 can be explained by a smooth change in mass-accretion rate.

79 ASTRONOMY AND ASTROPHYSICS↗

Massive Star Cluster Formation and Destruction in Luminous Infrared Galaxies in GOALS

We present the results of a Hubble Space Telescope ACS/HRC FUV, ACS/WFC optical study into the cluster populations of a sample of 22 Luminous Infrared Galaxies in the Great Observatories All-Sky LIRG Survey. Through integrated broadband photometry, we have derived ages and masses for a total of 484 star clusters contained within these systems. This allows us to examine the properties of star clusters found in the extreme environments of LIRGs relative to lower luminosity star-forming galaxies in the local universe. We find that by adopting a Bruzual and Charlot simple stellar population model and Salpeter initial mass function, the age distribution of the clusters declines as dN/dτ=τ{sup −0.9+/−0.3}, consistent with the age distribution derived for the Antennae Galaxies, and interpreted as evidence for rapid cluster disruption occurring in the strong tidal fields of merging galaxies. The large number of 10{sup 6} M{sub ⊙} young clusters identified in the sample also suggests that LIRGs are capable of producing more high-mass clusters than what is observed to date in any lower luminosity star-forming galaxy in the local universe. The observed cluster mass distribution of dN/dM=M{sup −1.95+/−0.11} is consistent with the canonical −2 power law used to describe the underlying initial cluster mass function (ICMF) for a wide range of galactic environments. We interpret this as evidence against mass-dependent cluster disruption, which would flatten the observed CMF relative to the underlying ICMF distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Radio Morphology of Red Geysers

We present 150 MHz, 1.4 GHz, and 3 GHz radio imaging (LoTSS, FIRST, and VLASS) and spatially resolved ionized gas characteristics (SDSS IV-MaNGA) for 140 local ($z$ < 0.1) early-type red geyser galaxies. These galaxies have a low star formation activity (with a star formation rate, SFR, ~ 0.01 $M$ ⊙ yr -1 ) but show unique extended patterns in spatially resolved emission-line maps that have been interpreted as large-scale ionized winds driven by active galactic nuclei (AGN). In this work, we confirm that red geysers host low-luminosity radio sources ($L$ 1.4GHz ~ 10 22 $WHz$ -1 ). Out of 42 radio-detected red geysers, 32 are spatially resolved in LoTSS and FIRST, with radio sizes varying between ~5–25 kpc. Three sources have radio sizes exceeding 40 kpc. A majority display a compact radio morphology and are consistent with either low-power compact radio sources (FR0 galaxies) or radio-quiet quasars. They may be powered by small-scale AGN-driven jets that remain unresolved at the current 5'' resolution of radio data. The extended radio sources, not belonging to the "compact" morphological class, exhibit steeper spectra with a median spectral index of -0.67, indicating the dominance of lobed components. Furthermore, the red geysers hosting extended radio sources also have the lowest specific SFRs, suggesting they either have a greater impact on the surrounding interstellar medium or are found in more massive halos on average. The degree of alignment of the ionized wind cone and the extended radio features are either 0° or 90°, indicating possible interaction between the interstellar medium and the central radio AGN.

79 ASTRONOMY AND ASTROPHYSICS↗

Probing the Metal Enrichment of the Intergalactic Medium at z = 5–6 Using the Hubble Space Telescope

We test the galactic outflow model by probing associated galaxies of four strong intergalactic C iv absorbers at z = 5–6 using the Hubble Space Telescope ( HST ) Advanced Camera for Surveys (ACS) ramp narrowband filters. The four strong C iv absorbers reside at z = 5.74, 5.52, 4.95, and 4.87, with column densities ranging from N {sub Civ} = 10{sup 13.8} to 10{sup 14.8} cm{sup −2}. At z = 5.74, we detect an i-dropout Ly α emitter (LAE) candidate with a projected impact parameter of 42 physical kpc from the C iv absorber. This LAE candidate has a Ly α -based star formation rate (SFR{sub Lyα} ) of 2 M {sub ⊙} yr{sup −1} and a UV-based SFR of 4 M {sub ⊙} yr{sup −1}. Although we cannot completely rule out that this i-dropout emitter may be an [O ii] interloper, its measured properties are consistent with the C iv powered galaxy at z = 5.74. For C iv absorbers at z = 4.95 and z = 4.87, although we detect two LAE candidates with impact parameters of 160 and 200 kpc, such distances are larger than that predicted from the simulations. Therefore, we treat them as nondetections. For the system at z = 5.52, we do not detect LAE candidates, placing a 3 σ upper limit of SFR{sub Lyα} ≈ 1.5 M {sub ⊙} yr{sup −1}. In summary, in these four cases, we only detect one plausible C iv source at z = 5.74. Combining the modest SFR of the one detection and the three nondetections, our HST observations strongly support that smaller galaxies (SFR{sub Lyα} ≲ 2 M {sub ⊙} yr{sup −1}) are main sources of intergalactic C iv absorbers, and such small galaxies play a major role in the metal enrichment of the intergalactic medium at z ≳ 5.

79 ASTRONOMY AND ASTROPHYSICS↗

The Kangaroo’s First Hop: The Early Fast Cooling Phase of EP250108a/SN 2025kg

Fast X-ray transients are a rare and poorly understood population of events. Previously difficult to detect in real time, the launch of the Einstein Probe with its Wide-field X-ray Telescope has led to a rapid expansionof the sample and allowed the exploration of these transients across the electromagnetic spectrum. EP250108a is a recently detected example linked to an optical counterpart, SN 2025kg, or “the kangaroo.” Together with a companion Letter we present our observing campaign and analysis of this event. In this letter, we focus on the early evolution of the optical counterpart over the first 6 days, including our measurement of the redshift of z = 0.17641. We compare to other supernovae and fast transients showing similar features, finding significant similarities with SN 2006aj and SN 2020bvc, and show that the source is well modelled by a rapidly expanding cooling blackbody. We show the observed X-ray and radio properties are consistent with a collapsar-powered jet that is low energy (≲10 51 erg) and/or fails to break out of the dense material surrounding it. While we examine the possibility that the optical emission emerges from the shock produced as the supernova ejecta expand into a dense shell of circumstellar material, due to our X-ray and radio inferences, we favour a model where it arises from a shocked cocoon resulting from a trapped jet. This makes SN 2025 one of the few examples of this currently observationally rare event.

79 ASTRONOMY AND ASTROPHYSICS↗

Space processing applications payload equipment study. Volume 2D: SPA supplemental power and heat rejection kit

The design and application of a supplementary power and heat rejection kit for the Spacelab are discussed. Two subsystems of electric power and thermal control were analyzed to define the requirements for the power and heat rejection kit (PHRK). Twelve exemplary experiments were defined and power timelines were developed. From these timeline, the experiment requirements for sustained power, peak power, and energy were determined. The electrical power subsystem of the PHRK will consist of two fuel cells, oxygen and hydrogen reactant tank assemblies, water storage tanks, plumbing, cabling, and inverters to convert the nominal 28 volt dc fuel cell output to ac power.

Hammel, R. L.↗

Double-discharge copper-vapor laser

Power supply for discharge pulses consists of two capacitors that are made to discharge synchronously with adjustable time intervals. First pulse is switched with hydrogen thyratron, and second by spark gap. Lasing action peaks for appropriate combination of these two parameters.

Chen, C. J.↗

The X-ray spectra of the Vela and Puppis supernova remnants and the shock-wave model of supernova remnants

The structure and spectrum of the Vela and Puppis supernova remnants (SNRs) were observed in soft (0.1 to 1.5 keV) X rays from a rocket. The spectral data of both objects below 1.5 keV are consistent with thermal radiation from a hot plasma and are not consistent with a simple power-law function. Fitting the data to a Tucker-Koren model results in values of T = (4.3 plus or minus 0.3) x 1,000,000 K for Vela and T = (7 plus or minus 1) x 1,000,000 K for Puppis. The present data, earlier data from the Cygnus Loop, and results on Cas A and Tycho reported by others are considered within the context of a simple model in which X rays are thermally produced as a result of a shock wave expanding into the interstellar medium. X-ray data on the temperature, intrinsic diameter, and intrinsic luminosity of the five SNRs are used to compute the age, energy release, and initial interstellar density for each one. From measurements of X-ray absorption along the line of sight, and also from shock-wave model interpretations of temperature-diameter-luminosity relations, it is concluded that the average density of interstellar material is about 0.1 per cu cm between the sun and the nearest X-ray emitting SNR, Vela.

Gorenstein, P.↗

The soft X-ray spectrum of the Perseus cluster

The X-ray spectrum of the Perseus cluster in the range 0.1-4.0 keV has been observed. Contrary to the results of previous low-energy rocket observations, no large flux of soft X-rays was found. The X-ray spectrum from 0.1 to 56 keV is consistent with bremsstrahlung from an intracluster gas with T approximately equal to 100 million K. attenuated by the interstellar column density inferred from 21-cm observations. The low-energy X-ray spectrum is not consistent with a nonthermal power-law model with the same slope as that observed at higher energies. The mass of hot intracluster gas required to produce the observed X-ray flux is a small fraction of the gravitational binding mass. The soft X-ray flux, when combined with limits on the radio flux, implies that the cluster is not gravitationally bounded by ionized gas at any temperature.

Davidsen, A.↗

Physical processes in Comet Kohoutek

Observational results are brought together to establish the mass loss of Comet Kohoutek (1973 XII) in H2O, solid particles, and other molecules. The production rate of molecules is seen to have flattened prior to peaking near perihelion passage, and then fell below the rate for the incoming branch of the orbit. The total mass loss was about 10 to the 14th power gm. All abundances are consistent with a clathrate-dominant form of water. Comparison of the sizes of the nucleus as calculated from photometry and the rate of water loss requires that either an unrealistically high albedo be assumed or that only a portion of the nucleus was covered by water, in contrast with previous expectations for a new and probable first-passage comet. Moreover, if the preperihelion estimates of the nuclear brightness are rejected as being contaminated, the resulting values indicate an ice-covered nucleus with a radius of 2.1 km.

Odell, C. R.↗

Detection of X-rays from Algol /beta Persei/

X-rays in the 2-6 keV band were detected from the Algol system using the rotating modulation collimator system on SAS-3 during an observation in October 1975. The measured X-ray flux is 3.8 x 10 to the -11th ergs/sq cm/s/keV. No positive detection was made in the 6-11 keV band. The data are consistent with either a power-law spectrum with photon spectral index not less than 2.5 or a thermal bremsstrahlung spectrum with a temperature not greater than 3 x 10 to the 7th K.

Schnopper, H. W.↗