Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Phase Selection During Solidification and Solid-State Phase Transformations in an Al-10Ce-8Mn (wt pct) Alloy

In multicomponent Al-Ce alloys, and especially after additive manufacturing (AM), complex and metastable solidification microstructures are frequently observed. Here, in this research, the relationship between solidification conditions and phase selection are explored for an Al-10Ce-8Mn (wt pct) alloy using a systematic study of laser melting conditions. Three solidification modes were observed: primary Al 10 Mn 2 Ce; primary Al 20 Mn 2 Ce; and eutectic FCC Al + Al 20 Mn 2 Ce. These solidification modes were correlated to specific liquid-solid interface velocities using a simple thermal model, showing the change in primary solidification phase for low (< 6.8 × 10 −4 m/s), moderate (between 8.2 × 10 −4 and 5.9 × 10 −2 m/s) and high solidification velocities (> 6.2 x 10 −2 m/s) for the above three solidification microstructures, respectively. These results were rationalized by using interface response function (IRF) theory to describe the solidification undercooling for the possible primary intermetallic phases. The implication of the local phase selection from differing solidification conditions is summarized by a comparison of hardness which demonstrates the potential variance of Vickers hardness from 101 to 242 (VHV) by changing the laser velocity from 1 to 83 mm/s. Interestingly, on heat treatment at 400°C, the decomposition pathways of the solidification microstructure and hardness were also found to be different, thereby opening multiple pathways for spatial microstructure and property control within AM components.

Sisco, Kevin↗
DOE OSTI2020

Numerical study of advanced compression ignition and combustion in a gasoline direct injection engine

Multi-mode combustion strategies may provide a considerable thermal efficiency improvement targeted at part-load operating conditions for light-duty spark-ignition (SI) engines. The extension from boosted SI mode at high loads to advanced compression ignition (ACI) mode at low loads can be achieved by increasing compression ratio and utilizing intake air heating. In order to enable an accurate control of intake charge condition for ACI control and rapid mode-switches, it is essential to gain fundamental insight into the autoignition process with regard to thermal and fuel-air mixture stratification in the combustion chamber. In this work, a computational fluid dynamics (CFD) study is carried out to reveal some degrees of correlation between the mixture and thermal stratifications induced by the cylinder wall temperature and combustion-phasing across varying engine load conditions. The computational analysis begins with a calibrated simulation setup best matching the engine experiments, and subsequently evaluates the baseline setup for an extended range of engine load conditions for two excess-air ratio cases. The present study emphasizes the dominance of thermal stratifications for autoignition process due to wall temperature effects depending on the engine load conditions of interest. In addition, this study also aims to provide insight into the impact of mixture stratification on cyclic variability, especially at colder wall engine conditions (e.g., cold start). Observations herein provide highlight of the propensity of autoignition in correlation with mixture reactivity space.

Advanced Compression Ignition (ACI) engine↗
DOE OSTI2024

Nonvolatile electrochemical memory at 600°C enabled by composition phase separation

Silicon-based microelectronics are limited to ~150°C and therefore not suitable for the extremely high temperatures in aerospace, energy, and space applications. While wide-band-gap semiconductors can provide high-temperature logic, nonvolatile memory devices at high temperatures have been challenging. In this work, we develop a nonvolatile electrochemical memory cell that stores and retains analog and digital information at temperatures as high as 600°C. Through correlative scanning transmission electron microscopy, we show that this high-temperature information retention is a result of composition phase separation between the oxidized and reduced forms of amorphous tantalum oxide. This result demonstrates a memory concept that is resilient at extreme temperatures and reveals phase separation as the principal mechanism that enables nonvolatile information storage in these electrochemical memory cells.

42 ENGINEERING↗
DOE OSTI2024

Lightning and Radar Measures of Mixed-Phase Updraft Variability in Tracked Storms during the TRACER Field Campaign in Houston, Texas

Properties of 7488 thunderstorms are summarized for June–September 2022 during the Tracking Aerosol Convection Interactions Experiment (TRACER) field campaign Houston, Texas, using polarimetric weather radar and VHF 3D Lightning Mapping Array data. Automated tracking of storms linked each instrument’s measurements to a data-defined, time-evolving storm footprint. Within each storm, the depth and magnitude of episodic columns of radar differential reflectivity and specific differential phase quantified the prevalence of updrafts that activated mixed-phase precipitation pathways. Lightning measurements further distinguished the degree of rimed precipitation formation: the fraction of tracks with lightning varied from day to day and cells with lightning had stronger polarimetric columns. Track-level correlation of the lightning flash rate with radar polarimetric measures had substantial spread, showing that lightning provides an additional signal of mixed-phase precipitation processes that can complement future studies of thermodynamic and aerosol controls on cloud microphysics in the Houston region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Charge density wave and superconductivity in the disordered Holstein model

The interplay between electron-electron correlations and disorder has been a central theme of condensed matter physics over the past several decades, with particular interest in the possibility that interactions might cause delocalization of an Anderson insulator into a metallic state, and the disrupting effects of randomness on magnetic order and the Mott phase. In this work, we extend this physics to explore electron-phonon interactions and show, via exact quantum Monte Carlo simulations, that the suppression of the charge density wave correlations in the half-filled Holstein model by disorder can stabilize a superconducting phase. Our simulations thus capture qualitatively the suppression of charge ordered phases and emergent superconductivity recently seen experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Magnetic Weyl Semimetallic Phase in Thin Films of Eu 2 Ir 2 O 7

The interplay between electronic interactions and strong spin-orbit coupling is expected to create a plethora of fascinating correlated topological states of quantum matter. Of particular interest are magnetic Weyl semimetals originally proposed in the pyrochlore iridates, which are only expected to reveal their topological nature in thin film form. To date, however, direct experimental demonstrations of these exotic phases remain elusive, due to the lack of usable single crystals and the insufficient quality of available films. Here, in this study, we report on the discovery of signatures for the long-sought magnetic Weyl semimetallic phase in (111)-oriented Eu 2 Ir 2 O 7 high-quality epitaxial thin films. We observed an intrinsic anomalous Hall effect with colossal coercivity but vanishing net magnetization, which emerges right below the onset of a peculiar magnetic phase with all-in-all-out (AIAO) antiferromagnetic ordering. The anomalous Hall conductivity obtained experimentally is consistent with the theoretical prediction, likely arising from the nonzero Berry curvature emanated by Weyl node pairs near the Fermi level that act as sources and sinks of Berry flux, activated by broken cubic crystal symmetry at the top and bottom terminations of the thin film.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High-order cumulants and correlation functions near the critical point from molecular dynamics

We present a systematic investigation of particle-number fluctuations in the crossover region near the critical end point of a first-order phase transition using molecular dynamics simulations of the classical Lennard-Jones fluid. We extend our prior studies to third- and fourth-order cumulants in both coordinate- and momentum-space acceptances and integrated correlation functions (factorial cumulants). We find that, even near the critical point, non-Gaussian cumulants equilibrate on timescales comparable to those of the second-order cumulants, but show stronger finite-size effects. The presence of interactions and of the critical point leads to strong deviations of the cumulants from the ideal-gas baseline in coordinate space; these deviations are expected to persist in momentum space in the presence of collective expansion. In particular, the kurtosis becomes strongly negative, κσ 2 ≪ − 1 , on the crossover side of the critical point. However, this signal is significantly diluted once an efficiency cut used to distinguish protons from baryons is applied, leading to |κσ 2 | ≲ 1 even in the presence of the critical point. We discuss our results in the context of ongoing measurements of proton-number cumulants in heavy-ion collisions in RHIC-BES-II.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Primordial black holes and magnetic fields in conformal neutrino mass models

Sufficiently strong and long-lasting first-order phase transitions can produce primordial black holes (PBHs) that contribute substantially to the dark matter abundance of the Universe, and can produce large-scale primordial magnetic fields. Here, we study these mechanisms in a generic class of conformal U(1)' models that also explain active neutrino oscillation data via the type-I seesaw mechanism. We find that phase transitions that occur at seesaw scales between 10 4 GeV and 10 11 GeV produce gravitational wave signals (from the dynamics of the phase transition and from the decay of cosmic string loops) at LISA/ET that can be correlated with microlensing signals of PBHs at the Roman Space Telescope, while scales near 10 11 GeV can be correlated with Hawking evaporation signals at future gamma-ray telescopes. LISA can probe the entire range of PBH masses between 1 × 10 -16 M ⊙ and 8 × 10 -11 M ⊙ if PBHs fully account for the dark matter abundance. For Z' masses between 40 TeV and 10 4 TeV, and 10 TeV right-handed neutrinos, helical magnetic fields can be produced with magnitudes ≳ 0.5 pG and coherence lengths ≳ 0.008 Mpc, above current blazar lower bounds.

cosmological phase transitions↗
DOE OSTI2021

Truncation effects in the charge representation of the O(2) model

The O(2) model in Euclidean space-time is the zero-gauge-coupling limit of the compact scalar quantum electrodynamics. In this work, we obtain a dual representation of it called the charge representation. We study the quantum phase transition in the charge representation with a truncation to “spin $\textit{S}$," where the quantum numbers have an absolute value less than or equal to $\textit{S}$. The charge representation preserves the gapless-to-gapped phase transition even for the smallest spin truncation $\textit{S}$ = 1. The phase transition for $\textit{S}$ = 1 is an infinite-order Gaussian transition with the same critical exponents $\textit{δ}$ and $\textit{η}$ as the Berezinskii-Kosterlitz-Thouless (BKT) transition, while there are true BKT transitions for $\textit{S}$ ≥ 2 . The essential singularity in the correlation length for $\textit{S}$ = 1 is different from that for $\textit{S}$ ≥ 2 . The exponential convergence of the phase-transition point is studied in both Lagrangian and Hamiltonian formulations. We discuss the effects of replacing the truncated $\hat{U}^±$ = exp ($± i\hat{θ}$) operators by the spin ladder operators $\hat{S}^±$ in the Hamiltonian. The marginal operators vanish at the Gaussian transition point for $\textit{S}$ = 1, which allows us to extract the $\textit{η}$ exponent with high accuracy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiple magnetic orders in LaFeAs 1-x P x O uncover universality of iron-pnictide superconductors

The iron-pnictide superconductors have generated tremendous excitement as the competition between magnetism and superconductivity has allowed unique in-roads towards elucidating a microscopic theory of unconventional high-temperature superconductivity. In addition to the stripe spin density wave ($C^a_{2M}$) phase observed in the parent compounds of all iron-pnictide superconductors, two novel magnetic orders have recently been discovered in different parent structures: an out-of-plane collinear double-Q ($C^c_{4M}$) structure in the hole-doped (Ca, Sr, Ba) 1-x (Na) x Fe 2 As 2 and Ba 1-x K x Fe 2 As 2 families, and a spin vortex crystal “hedgehog” ($C^{ab}_{4M}$) structure in the CaKFe 4 As 4 family. Using neutron diffraction, we demonstrate that LaFeAs 1-x P x O contains all three magnetic orders within a single-phase diagram as a function of substitution, all of which compete strongly with superconductivity. Our experimental observations combined with theoretical modeling demonstrate how the reduction in electronic correlations by chemical substitution results in larger Fermi surfaces and the sequential stabilization of multiple magnetic anisotropies. Our work presents a unified narrative for the competing magnetic and superconducting phases observed in various iron-pnictide systems with different crystal structures and chemistry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Strength mechanisms and tunability in Al-Ce-Mg ternary alloys enabled by additive manufacturing

Al-Ce-based alloys are promising candidates for additive manufacturing (AM) due to their hot-cracking resistance and because they do not require heat treatment to obtain precipitation strengthening. Rapid solidification rates enabled by AM methods can lead to enhanced mechanical properties; however, the strengthening mechanisms over large composition ranges were unclear. Here, combinatorial synthesis by directed-energy deposition (DED) and hardness measurements were used to rapidly map the composition-dependent strength of the ternary Al-Ce-Mg system. Tensile testing and microstructure characterization of selected compositions were performed to elucidate the compositional dependence of the strengthening mechanisms. Al 11 Ce 3 precipitates were present in all cases, and the maximum hardness (1.25 GPa) was measured for the Al-8Ce-10Mg composition. A combination of (i) Hall-Petch strengthening, based on the FCC-matrix-phase cell size; (ii) particle strengthening, based on Al 11 Ce 3 volume fraction and size; and (iii) solid-solution strengthening, based on Mg composition of the matrix phase, were used to account for the measured strengths. Vickers hardness is shown to correlate well with ultimate tensile strength in these alloys, highlighting the value of surface-based techniques for rapid screening.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bispectral analysis of broadband turbulence and geodesic acoustic modes in the T-10 tokamak

Local fluctuations of electrostatic potential, poloidal electric field, magnetic potential and electron density are simultaneously measured in the T-10 tokamak by a heavy ion beam probe (HIBP) having a five-slit energy analyser, which allows an estimate of the turbulent particle flux and $\boldsymbol {E}\times \boldsymbol {B}$ rotation velocity in the off-minor-axis gradient zone of the toroidal plasma column. The high spatial and temporal resolution of the modern multichannel HIBP makes it an effective tool to study plasma oscillations. Motivated by previous work that has documented time-resolved interactions between measured plasma parameters using correlation analysis (coherence of $E_{\textrm {pol}}$ and density $n_e$ , and cross-phase), a new result from bicorrelation analysis (bicoherence of magnetic potential $A_\zeta$ and density $n_e$ , and biphase) is reported for documenting the evidence of wave–wave coupling and energy transfer associated with the interaction between geodesic acoustic modes (GAM) and broadband, quasi-coherent modes.

Physics↗
DOE OSTI2025

Eocene-Oligocene Metamorphism, Fluid Flow and Deformation in the Ruby Mountains-East Humboldt Range Metamorphic Core Complex

Metamorphic core complexes are ubiquitous in collapsed orogens globally and play a primary role in crustal exhumation. Here, we investigate the metamorphic history of the Ruby Mountains-East Humboldt Range metamorphic core complex, Nevada, using petrochronology to understand how magmatism, metamorphism and deformation interact to modulate crustal rheology, and the timing of exhumation within the Sevier orogenic belt. Field study, microstructural analysis, thermobarometry and laser ablation split-stream monazite, titanite and allanite petrochronology of the mylonitic footwall were integrated to elucidate the pressure-temperature-time (P-T-t) evolution. Major-, trace-element and quartz-in-garnet thermobarometry show peak metamorphism occurred at 5.5–6 kbar and 600–650°C across the study area. Monazite and titanite U-(Th)-Pb petrochronology constrain this episode of metamorphism to 88–81 Ma with the structurally deepest samples yielding dates down to ca. 71 Ma. The preservation of peak metamorphic mineral assemblages indicates these rocks remained at near-peak temperature conditions into the Cenozoic. Cenozoic metamorphism occurred during a punctuated episode contemporaneous with the Great Basin ignimbrite flare up. All samples show a distinct 39–37 Ma population of monazite, titanite and allanite dates that correlate with the emplacement of quartz diorite and gabbro intrusions throughout the footwall. Accessory phases contain zoning textures in backscattered electron images that are consistent with fluid-mediated dissolution-reprecipitation reactions. The U-(Th)-Pb analyses from these zones yield 39–27 Ma dates interpreted as the timing of fluid flow. The results of this study elucidate the integrated importance of magmatism, melting and fluid flow in driving the coupled evolution of Late Cretaceous metamorphism within the Sevier hinterland and the subsequent Cenozoic metamorphic core complex development that exhumed the middle crust.

58 GEOSCIENCES↗
DOE OSTI2025

Radiation damages the silicates present in polyphasic mineral aggregates causing concrete’s degradation

While many U.S. nuclear power plants have submitted Subsequent License Renewal Application to operate beyond 60 years, others are already considering Operations Beyond Eighty years. In such cases, concrete biological shields are exposed to neutron and gamma radiation exceeding prescribed thresholds. Radiation-induced volumetric expansion (RIVE), extensively studied in single crystals, may also contribute to the degradation of polycrystalline aggregates. Since minerals differ in atomic structure and chemistry, radiation can affect them in distinct ways. This study examines quartzite, marble, and limestone to evaluate how irradiation affects their physical attributes and chemical reactivity. Results show crystalline silicates experience significant RIVE damage and enhanced reactivity in alkaline solutions compared to non-irradiated phases. Enhanced intra- and inter-granular dissolution could compromise aggregate integrity. An empirical correlation links silicate dissolution rate to atomic constraints (density, rigidity) and radiation dose, providing a predictive framework for estimating changes in silicate aggregate properties within radiation-exposed concrete.

Bouissonnié, Arnaud [Univ. of California, Los Ange↗
DOE OSTI2023

Isotope effects on energy transport in the core of ASDEX-Upgrade tokamak plasmas: Turbulence measurements and model validation

Design and operation of future tokamak fusion reactors using a deuterium–tritium 50:50 mix requires a solid understanding of how energy confinement properties change with ion mass. This study looks at how turbulence and energy transport change in L-mode plasmas in the ASDEX Upgrade tokamak when changing ion species between hydrogen and deuterium. For this purpose, both experimental turbulence measurements and modeling are employed. Local measurements of ion-scale (with wavevector of fluctuations perpendicular to the B-field k⊥< 2 cm−1, k⊥ρs< 0.2, where ρs is the ion sound Larmor radius using the deuterium ion mass) electron temperature fluctuations have been performed in the outer core (normalized toroidal flux ρTor=0.65−0.8) using a multi-channel correlation electron cyclotron emission diagnostic. Lower root mean square perpendicular fluctuation amplitudes and radial correlation lengths have been measured in hydrogen vs deuterium. Measurements of the cross-phase angle between a normal-incidence reflectometer and an ECE signal were made to infer the cross-phase angle between density and temperature fluctuations. The magnitude of the cross-phase angle was found larger (more out-of-phase) in hydrogen than in deuterium. TRANSP power balance simulations show a larger ion heat flux in hydrogen where the electron-ion heat exchange term is found to play an important role. These experimental observations were used as the basis of a validation study of both quasilinear gyrofluid trapped gyro-Landau fluid-SAT2 and nonlinear gyrokinetic GENE codes. Linear solvers indicate that, at long wavelengths (k⊥ρs<1), energy transport in the deuterium discharge is dominated by a mixed ion-temperature-gradient (ITG) and trapped-electron mode turbulence while in hydrogen transport is exclusively and more strongly driven by ITG turbulence. The Ricci validation metric has been used to quantify the agreement between experiments and simulations taking into account both experimental and simulation uncertainties as well as four different observables across different levels of the primacy hierarchy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Nanoscale insights into the structure of solution-processed graphene by x-ray scattering

Abstract Chemical exfoliation is an attractive approach for the synthesis of graphene due to its low cost and simplicity. However, challenges still remain in the characterization of solution-processed graphene, in particular with atomic resolution. Through this work we demonstrate the x-ray pair distribution function as a novel approach to study solution-processed graphene or other 2D materials with atomic resolution, directly in solution, produced by liquid-phase and electrochemical exfoliations. The results show the disappearance of long-range atomic correlations, in both cases, confirming the production of single and few-layer graphene. In addition, a considerable ring distortion has been observed as compared to graphite, irrespective of the solvent used: the normal surface angle to the sheet of the powder sample should be less than 6°, compatible with ripples formation observed in suspended graphene. We attribute this effect to the interaction of solvent molecules with the graphene nanosheets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation of the photoluminescent properties, scintillation behaviour and toxicological profile of various magnesium tungstate nanoscale motifs

We have synthesized several morphologies and crystal structures of MgWO 4 using a one-pot hydrothermal method, producing not only monoclinic stars and large nanoparticles but also triclinic wool balls and sub-10 nm nanoparticles. Herein we describe the importance of reaction parameters in demonstrating morphology control of as-prepared MgWO 4 . Moreover, we correlate structure and composition with the resulting photoluminescence and radioluminescence properties. Specifically, triclinic-phase samples yielded a photoluminescence emission of 421 nm, whereas monoclinic-phase materials gave rise to an emission maximum of 515 nm. The corresponding radioluminescence data were characterized by a broad emission peak, located at 500 nm for all samples. Annealing the wool balls and sub-10 nm particles to transform the crystal structure from a triclinic to a monoclinic phase yielded a radioluminescence (RL) emission signal that was two orders of magnitude greater than that of their unannealed counterparts. Finally, to confirm the practical utility of these materials for biomedical applications, a series of sub-10 nm particles, including as-prepared and annealed samples, were functionalized with biocompatible PEG molecules, and subsequently were found to be readily taken up by various cell lines as well as primary cultured hippocampal neurons with low levels of toxicity, thereby highlighting for the first time the potential of this particular class of metal oxides as viable and readily generated platforms for a range of biomedical applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Metal-insulator transition in transition metal dichalcogenide heterobilayer moiré superlattices

Moiré superlattices formed in two-dimensional semiconductor heterobilayers provide a new realization of Hubbard model physics in which the number of electrons per effective atom can be tuned at will. Here we report on an exact diagonalization study of the electronic properties of half-filled narrow moiré bands in which correlation strengths are varied by changing twist angles or interaction strengths. We construct a phase diagram for the bilayer, identifying where the metal-insulator phase transition occurs, estimating the sizes of the charge gaps in the insulating phase, and commenting on the nature of the transition and the importance of subdominant interaction parameters.

2-dimensional systems↗