Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Biomass char gasification kinetic rates compared to data, including ash effects

This investigation provides both experimental and theoretical analyses of biomass char gasification kinetics over 1150–1350 °C in the environment of CO 2 , H 2 O and combinations of these reactants. The experimental data include continuous measurements of particle mass, external and internal temperatures, shape, and size with periodic but not continuous measurements of char porosity, pore size distribution, and pore surface area. The model describes heterogeneous char gasification for poplar wood, corn stover and switchgrass in different shapes and industrially relevant sizes (12.5 mm and smaller). Nonlinear least-squares regression produces optimized power-law model parameters for global kinetics that describe biomass char gasification with respect to both CO 2 and H 2 O separately and in combination. A single set of kinetic parameters describes reaction rates for all three fuels. Model simulations agree with measured data at all stages of char conversion even though the observed mass loss rates change significantly with conversion. In conclusion, the change in rate with conversion depends strongly on ash content, and this investigation provides a simple and theoretically based reaction rate expression that includes the effect of inert ash occupying an increasing portion of the reactive surface with increased conversion.

09 BIOMASS FUELS↗

Physical and dynamical characterization of hyperbolic comet C/2017 U7 (PANSTARRS)

Here we present here a dynamical and observational study of the comet C/2017 U7 (PANSTARRS). This comet was discovered in 2017 and found to have a hyperbolic orbit. Our dynamical analysis shows that the object has probably originated in the Oort cloud, however an interstellar origin cannot be discarded. The observations were obtained in 2018 and 2019 using the Goodman High Throughput Spectrograph (GHTS) at the SOAR telescope. We obtained visible spectra covering the wavelength range of 0.5 - 0.9 μm and also images in the SDSS filters system. Both the low-resolution reflectance spectrum and the reflectance spectra derived from the SDSS filters show an atypical band at ~ 0.595 μm. We conducted a comparative study of the colors and reflectance spectra of different small body populations (e.g., comets, Centaurs, and trans-Neptunian objects or TNOs) from the literature and concluded that the spectra and the colors of this comet are atypical, showing only some overlap with those of some known members of the TNOs and Centaurs, within the large uncertainties of the measurements of those populations. It is found that the feature and overall spectral shape can be reproduced by laboratory spectra of kerite, a template for aliphatic-rich hydrocarbons that has been previously identified in NIR cometary spectra absorptions. It is tentatively proposed that the unusual spectral shape is the result of a particle size distribution of dust grains in the coma or on the surface that has arisen due to a low grain ejection velocity from the surface and large nucleus size.

79 ASTRONOMY AND ASTROPHYSICS↗

CoTiO{sub 3} via cobalt oxalate-TiO{sub 2} precursor. Synthesis and characterization

Purely trigonal ilmenite type powder; CoTiO{sub 3} was successfully synthesized through the thermal decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. The decomposition course was followed using differential thermal analysis-thermogravimetry measurements and the intermediate decomposition products as well as the titanate product were characterized using X-ray diffraction, Fourier transform infrared, transmission electron microscopy techniques. Thermal analysis study indicated that, the intermediate decomposition product; Co{sub 3}O{sub 4} decomposed endothermically into CoO at 963 Degree-Sign C with instantaneous formation of CoTiO{sub 3}. X-ray diffraction of the powder calcined at 950 Degree-Sign C showed characteristic lines for Co{sub 2}TiO{sub 4} besides secondary phase of rutile-TiO{sub 2}, which are disappeared by rising the calcination temperature to 1000 Degree-Sign C. Transmission electron microscopy image of CoTiO{sub 3} powder exhibit weak agglomerated particles with heterogeneous morphology in both shape and dimensions. Type II adsorption isotherm estimated using Brunauer-Emmett-Teller procedure indicated a very high specific surface area of 29.7 m{sup 2} g{sup -1}. Electrical properties of CoTiO{sub 3} measured as a function of temperature and frequency showed a semiconducting behavior at high temperatures with conduction activation energy of 0.73 eV. Kinetic analysis of the non-isothermal thermogravimetry curves, using different computational methods, illustrated that the random nucleation and growth mechanisms are the predominant one. - Graphical Abstract: The figure showed the variation of dielectric constant ({epsilon} Prime ) for CoTiO{sub 3} with temperature at different frequencies. {epsilon} Prime appeared to be temperature and frequency independent at low temperatures. By increasing the temperature, the orientation polarization plays a significant role and a gradual increase of {epsilon} Prime occurred. Highlights: Black-Right-Pointing-Pointer CoTiO{sub 3} was synthesized through decomposition of CoC{sub 2}O{sub 4}{center_dot}2H{sub 2}O-TiO{sub 2} precursor. Black-Right-Pointing-Pointer XRD, FT-IR, TEM techniques are used to characterize decomposition course. Black-Right-Pointing-Pointer Specific surface area of 29.7 m{sup 2} g{sup -1} was obtained. Black-Right-Pointing-Pointer The prepared titanate showed semiconducting behavior.

36 MATERIALS SCIENCE↗

Effect of temperature on the optical and structural properties of hexadecylamine capped ZnS nanoparticles using Zinc(II) N-ethyl-N-phenyldithiocarbamate as single source precursor

Graphical abstract: Display Omitted Highlights: ► HDA-capped ZnS nanoparticles were synthesized via thermolysis of a single source precursor. ► Zinc(II) N-ethyl-N-phenyldithiocarbamate was used as the single source precursor. ► The growth temperature was varied to study the optical properties of the nanocrystals. ► Change in growth temperature affects the structural properties of the ZnS nanoparticles. ► Hexagonal wurtzite phase was obtained at lower temperatures while cubic sphalerite phase was obtained at higher growth temperatures. -- Abstract: Reported in this work is the synthesis of HDA (hexadecylamine)-capped ZnS nanoparticles by a single source route using Zinc(II) N-ethyl-N-phenyldithiocarbamate as a precursor. By varying the growth temperature, the temporal evolution of the optical properties and morphology of the nanocrystals were investigated. The as-synthesized nanoparticles were characterized using UV–vis absorption and photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). All the particles exhibited quantum confinement in their optical properties with band edge emission at the early stage of the reaction. The XRD showed transition from hexagonal wurtzite phase to cubic sphalerite phase as the growth temperature increases. The TEM image showed that the particles are small and spherical in shape while the HRTEM image confirmed the crystalline nature of the material.

36 MATERIALS SCIENCE↗

Synthesis of Gadolinium Scandate from a Hydroxide Hydrogel

In this paper, gadolinium scandate (GdScO 3 ) has been synthesized at 300 °C through the decomposition of a mixed cation hydroxide hydrogel in a humid environment. Increasing the reaction temperature produced larger particles that better adopted the Wulff shape. A lack of water vapor during the synthesis caused the solid network of the hydrogel to collapse upon heating so an amorphous xerogel was produced. Water vapor in the system imbibed the hydrogel and allowed for greater diffusion of the atomic species to allow for crystallization into the perovskite phase at temperatures lower than typical sol–gel processes. Finally, temperatures less than 300 °C, or an excess of water vapor, promoted the formation of Gd(OH) 3 and ScOOH in addition to or in lieu of GdScO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recirculating Linac Accelerators For Future Muon Facilities

Neutrino Factories (NF) and Muon Colliders (MC) require rapid acceleration of shortlived muons to multi-GeV and TeV energies. A Recirculating Linear Accelerator (RLA) that uses superconducting RF structures can provide exceptionally fast and economical acceleration to the extent that the focusing range of the RLA quadrupoles allows each muon to pass several times through each high-gradient cavity. A new concept of rapidly changing the strength of the RLA focusing quadrupoles as the muons gain energy is being developed to increase the number of passes that each muon will make in the RF cavities, leading to greater cost effectiveness. We discuss the optics and technical requirements for RLA designs, using RF cavities capable of simultaneous acceleration of both m+ and m- species. The design will include the optics for the multi-pass linac and droplet-shaped return arcs.

43 PARTICLE ACCELERATORS↗

Large scale ZnTe nanostructures on polymer micro patterns via capillary force photolithography

A novel approach to prepare micro patterns ZnTe nanostructures on Si (100) substrate using thermal evaporation is proposed by capillary Force Lithography (CFL) technique on a self-assembled sacrificial Polystyrene mask. Polystyrene thin films on Si substrates are used to fabricate surface micro-relief patterns. ZnTe nanoparticles have been deposited by thermal evaporation method. The deposited ZnTe nanoparticles properties were assessed by Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM). SEM studies indicated that the particles are uniform in size and shape, well dispersed and spherical in shape. This study reports the micro-arrays of ZnTe nanoparticles on a self-assembled sacrificial PS mask using a capillary flow photolithography process which showed excellent, morphological properties which can be used in photovoltaic devices for anti-reflection applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystals of Janus colloids at various interaction ranges

We investigate the effect of interaction range on the phase behaviour of Janus particles with a Kern-Frenkel potential. Specifically, we study interaction ranges Δ = 0.1σ, 0.3σ, 0.4σ, 0.5σ with σ the particle diameter, and use variable box shape simulations to predict crystal structures. We found that changing the interaction range beyond 0.2σ drastically increases the variety of possible crystal structures. In addition to close-packed structures, we find body-centered tetragonal and AA-stacked hexagonal crystals, as well as several lamellar crystals. For long interaction ranges and low temperatures, we also observe an extremely large number of metastable structures which compete with the thermodynamically stable ones. These competing structures hinder the detection of the lowest-energy crystal structures, and are also likely to interfere with the spontaneous formation of the ground-state structure. Finally, we determine the gas-liquid coexistence curves for several interaction ranges, and observe that these are metastable with respect to crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field emission properties and strong localization effect in conduction mechanism of nanostructured perovskite LaNiO{sub 3}

We report the potential field emission of highly conducting metallic perovskite lanthanum nickelate (LaNiO{sub 3}) from the nanostructured pyramidal and whisker shaped tips as electron emitters. Nano particles of lanthanum nickelate (LNO) were prepared by sol-gel route. Structural and morphological studies have been carried out. Field emission of LNO exhibited high emission current density, J = 3.37 mA/cm{sup 2} at a low threshold electric field, E{sub th} = 16.91 V/μm, obeying Fowler–Nordheim tunneling. The DC electrical resistivity exhibited upturn at 11.6 K indicating localization of electron at low temperature. Magnetoresistance measurement at different temperatures confirmed strong localization in nanostructured LNO obeying Anderson localization effect at low temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

AN ATTEMPT AT A UNIFIED MODEL FOR THE GAMMA-RAY EMISSION OF SUPERNOVA REMNANTS

Shocks of supernova remnants (SNRs) are important (and perhaps the dominant) agents for the production of the Galactic cosmic rays. Recent {gamma}-ray observations of several SNRs have made this case more compelling. However, these broadband high-energy measurements also reveal a variety of spectral shapes demanding more comprehensive modeling of emissions from SNRs. According to the locally observed fluxes of cosmic-ray protons and electrons, the electron-to-proton number ratio is known to be about 1%. Assuming such a ratio is universal for all SNRs and identical spectral shape for all kinds of accelerated particles, we propose a unified model that ascribes the distinct {gamma}-ray spectra of different SNRs to variations of the medium density and the spectral difference between cosmic-ray electrons and protons observed from Earth to transport effects. For low-density environments, the {gamma}-ray emission is inverse-Compton dominated. For high-density environments like systems of high-energy particles interacting with molecular clouds, the {gamma}-ray emission is {pi}{sup 0}-decay dominated. The model predicts a hadronic origin of {gamma}-ray emission from very old remnants interacting mostly with molecular clouds and a leptonic origin for intermediate-age remnants whose shocks propagate in a low-density environment created by their progenitors via, e.g., strong stellar winds. These results can be regarded as evidence in support of the SNR origin of Galactic cosmic rays.

79 ASTRONOMY AND ASTROPHYSICS↗

THE FLOW AROUND A COSMIC STRING. I. HYDRODYNAMIC SOLUTION

Cosmic strings are linear topological defects which are hypothesized to be produced during inflation. Most searches for strings have relied on the string’s lensing of background galaxies or the cosmic microwave background. In this paper, I obtained a solution for the supersonic flow of collisional gas past the cosmic string which has two planar shocks with a shock compression ratio that depends on the angle defect of the string and its speed. The shocks result in the compression and heating of the gas and, given favorable conditions, particle acceleration. Gas heating and over-density in an unusual wedge shape can be detected by observing the Hi line at high redshifts. Particle acceleration can occur in the present-day universe when the string crosses the hot gas contained in galaxy clusters and, since the consequences of such a collision persist for cosmological timescales, could be located by looking at unusual large-scale radio sources situated on a single spatial plane.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar Extreme UV radiation and quark nugget dark matter model

We advocate the idea that the surprising emission of extreme ultra violet (EUV) radiation and soft x-rays from the Sun are powered externally by incident dark matter (DM) particles. The energy and the spectral shape of this otherwise unexpected solar irradiation is estimated within the quark nugget dark matter model. This model was originally invented as a natural explanation of the observed ratio Ω{sub dark} ∼ Ω{sub visible} when the DM and visible matter densities assume the same order of magnitude values. This generic consequence of the model is a result of the common origin of both types of matter which are formed during the same QCD transition and both proportional to the same fundamental dimensional parameter Λ{sub QCD}. We also present arguments suggesting that the transient brightening-like 'nanoflares' in the Sun may be related to the annihilation events which inevitably occur in the solar atmosphere within this dark matter scenario.

79 ASTRONOMY AND ASTROPHYSICS↗

Observing neutron alignment at high angular momenta in heavy deformed actinides

An outstanding puzzle in the structure of very heavy nuclei lies in the rotation response of deformed transuranic isotopes. While the rotation alignment of pairs of 𝑖 13/2 protons is ubiquitous and well understood, observing the analogous alignment of the 𝑗 15/2 neutrons has been elusive. In this work we present a new quantitative analysis approach: from their moments of inertia as a function of frequency, we compare the alignments of rotational bands with both “low” and high-𝑗 intrinsic structures in the 𝑁 = 151 isotones of Pu, Cm, Cf, and No, thereby distinguishing between the alignments of neutron versus proton pairs through “blocking” effects. In this way, the alignment of 𝑗 15/2 neutrons can be clearly identified for the first time. The protons and neutrons begin aligning at a very similar frequency. The contribution of 𝑗 15/2 neutrons to the total alignment is found to grow with increasing 𝑍 compared to 𝑖 13/2 protons. To explain these observations, it is necessary to adopt a self-consistent set of single-particle energies corresponding to the nuclear shape that minimizes the mass. The shape description needs to include high-order deformations up to at least 𝛽 6 .

A ≥ 220↗

Structure of even-even Sr isotopes with 50 ≤ N ≤ 58 neutrons

Excited levels in Sr 90 , Sr 92 , Sr 94 , and Sr 96 nuclei were reinvestigated using high-statistics multiple- γ coincidence data from neutron-induced fission of U 235 and spontaneous fission of Cf 252 , measured using Exogam at Institut Laue Langevin and Gammasphere arrays, respectively. The experimental goal was the search for new excited levels and firm spin-parity assignments to known levels. A total of 23 new levels with 30 new or corrected decays and 39 new or improved spin-parity assignments were obtained in the four nuclei. Negative-parity structures on top of 3 - excitation were firmly identified and extended to higher spins. New positive-parity structures in Sr 94 and Sr 96 were observed with 3 + excitations characteristic of γ collectivity. The 277.7-keV, E 2 decay from the 1507.0-keV level to the second 0 + level in Sr 96 , found in this paper, completes the coexisting deformed band in this nucleus. To learn about the microscopic structure of levels in the Sr 88 - 96 nuclei, we performed large-scale shell-model calculations. The calculations compared to the experiment, helped the discussion of the evolution of collectivity in strontium isotopes, highlighting the important role of various single-particle excitations in phase transitions and shape coexistence in the region. The special role of the neutron 9 / 2 + [ 404 ] extruder as a catalyst of the deformation change in the region is highlighted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Glancing angle deposition of Ge nanorod arrays on Si patterned substrates

A periodic arrangement of Ge nanorods on a Si(111) substrate was realized by glancing angle deposition (GLAD) onto honeycomb-like arranged Au hillocks formed using a self-assembled monolayer of polystyrene nanospheres as an evaporation mask. Additionally, a honeycomb-like arrangement of Au dots was used as an etch mask in a reactive ion beam etching process for pattern transfer procedure. Resulting honeycomb patterns consisting of Si hillocks within the Si(111) substrates were utilized to deposit Ge nanorods. Effective morphological variations in shape and dimension of GLAD-grown nanorods on honeycomb-like patterned substrates with both Au dot and Si dot arrays are strongly influenced by interseed distances, seed heights, and consequently shadowing lengths. For a large pattern period, it was observed that the usual triangular shape of the nanorod changed to a hexagonal shape as an effect of additional particle flux that reached the growing nanorod from the direction of second and third-nearest neighbors due to inadequate shadowing lengths and increased interseed condensation.

36 MATERIALS SCIENCE↗

Cuprous Oxide Scale up: Gram Production via Bulk Synthesis using Classic Solvents at Low Temperatures

Cuprous oxide is a p-type semiconducting material that has been highly researched for its interesting properties. Many small-scale syntheses have exhibited excellent control over size and morphology. As the demand for cuprous oxide grows, the synthesis method need to evolve to facilitate large-scale production. This paper supplies a facile bulk synthesis method for Cu₂O on average, 1-liter reaction volume can produce 1 gram of particles. In order to study the shape and size control mechanisms on such a scale, the reaction volume was diminished to 250 mL producing on average 0.3 grams of nanoparticles per batch. Well-shaped nanoparticles have been synthesized using an aqueous solution of CuCl₂, NaOH, SDS surfactant, and NH₂OH-HCl at mild temperatures. The time allotted between the addition of NaOH and NH₂OH-HCl was determined to be critical for Cu(OH)2 production, an important precursor to the final produce The effects of stirring rates on a large scale was also analyzed during reagent addition and post reagent addition. A morphological change from rhombic dodecahedra to spheres occurred as the stirring speed was increased. The effects of NH₂OH-HCl concentration were also studied to control the etching effects of the final product.

36 MATERIALS SCIENCE↗

Investigation of fundamental limits to beam brightness available from photoinjectors

The goal of this project was investigation of fundamental limits to beam brightness available from photoinjectors. This basic research in accelerator physics spanned over 5 years aiming to extend the fundamental understanding of high average current, low emittance sources of relativistic electrons based on photoemission guns, a necessary prerequisite for a new generation of coherent X-ray synchrotron radiation facilities based on continuous duty superconducting linacs. The program focused on two areas critical to making advances in the electron source performance: 1) the physics of photocathodes for the production of low emittance electrons and 2) control of space charge forces in the immediate vicinity to the cathode via 3D laser pulse shaping.

43 PARTICLE ACCELERATORS↗