Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POTASSIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Prediction of underground argon content for dark matter experiments

In this paper, we demonstrate the use of physical models to evaluate the production of {sup 39}Ar and {sup 40}Ar underground. Considering both cosmogenic {sup 39}Ar production and radiogenic {sup 40}Ar production in situ and from external sources, we can derive the ratio of {sup 39}Ar to {sup 40}Ar in underground sources. We show for the first time that the {sup 39}Ar production underground is dominated by stopping negative muon capture on {sup 39}K and (alpha,n) induced subsequent {sup 39}K(n,p){sup 39}Ar reactions. The production of {sup 39}Ar is shown as a function of depth. We demonstrate that argon depleted in {sup 39}Ar can be obtained only if the depth of the underground resources is greater than 500 m.w.e. below the surface. Stopping negative muon capture on {sup 39}K dominates over radiogenic production at depths of less than 2000 m.w.e., and that production by muon-induced neutrons is subdominant at any depth. The depletion factor depends strongly on both radioactivity level and potassium content in the rock. We measure the radioactivity concentration and potassium concentration in the rock for a potential site of an underground argon source in South Dakota. Depending on the probability of {sup 39}Ar and {sup 40}Ar produced underground being dissolved in the water, the upper limit of the concentration of {sup 39}Ar in the underground water at this site is estimated to be in a range of a factor of 1.6 to 155 less than the {sup 39}Ar concentration in the atmosphere. The calculation tools presented in this paper are also critical to the dating method with {sup 39}Ar.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Formation of temperature fields in doped anisotropic crystals under spatially inhomogeneous light beams passing through them

The features of formation of thermal fields in potassium dihydrophosphate crystal doped with potassium permanganate under a 532-nm laser beam passing through it have been investigated. Data on the influence of birefringence on the temperature distribution in an anisotropic crystal whose surface is illuminated by a spatially modulated light beam are presented.

36 MATERIALS SCIENCE↗

Optimization of the dissolution of molybdenum disks. FY-16 results

Argonne National Laboratory is providing technical development assistance to NorthStar Medical Technologies LLC in its pursuit of two pathways for production of molybdenum-99: the 98 Mo(n,γ) 99 Mo reaction and the photonuclear reaction, 100 Mo(γ,n) 99 Mo. Processing of irradiated targets, from either production mode, requires dissolution of the target material in H 2 O 2 followed by a concentration step, addition of ferric ion to precipitate impurities, and conversion of the final solution to 5M potassium hydroxide solution of potassium molybdate. Currently, NorthStar is using pressed and sintered Mo disks as targets. Several options are being considered for the design of Mo targets for the production of 99 Mo using the (γ,n) reaction. In the current design, the target holder contains a series of sintered Mo disks lined up perpendicular to two incident electron beams, one entering from each side of the target stack. In this configuration, the front-most disks absorb most of the heat from the electron beam and need to be thinner to allow for better cooling, while the middle of the target can be thicker. Distribution of the total mass of Mo allows for larger masses of Mo material and thus larger production batches of 99 Mo. A limitation of the sintering approach is the production of very thin disks. Recent advances in 3D printing allow for much thinner target components can be achieved than when the traditional press-and-sinter approach is used. We have demonstrated that several factors can play important roles in dissolution behavior: particle size of Mo metal used for production of targets, sintering conditions, degree of open porosity, and thickness of the sintered Mo targets. Here we report experimental results from studies of small-scale dissolution of sintered Mo disks fabricated from various recycled and commercial Mo materials, and dissolution of 3D-printed Mo disks that were fabricated by Oak Ridge National Laboratory (ORNL). We also report on large-scale dissolution studies with 600 g batches of sintered Mo disks.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Effect of composition on the density of multi-component molten nitrate salts.

The density of molten nitrate salts was measured to determine the effects of the constituents on the density of multi-component mixtures. The molten salts consisted of various proportions of the nitrates of potassium, sodium, lithium and calcium. Density measurements ere performed using an Archimedean method and the results were compared to data reported in the literature for the individual constituent salts or simple combinations, such as the binary Solar Salt mixture of NaNO3 and KNO3. The addition of calcium nitrate generally ncreased density, relative to potassium nitrate or sodium nitrate, while lithium nitrate decreased density. The temperature dependence of density is described by a linear equation regardless of composition. The molar volume, and thereby, density of multi-component mixtures an be calculated as a function of temperature using a linear additivity rule based on the properties of the individual constituents.

25 ENERGY STORAGE↗

Wash Penalty Factors: Insight into the Effects of Water Wash Down of Building Materials for Radionuclide/Nuclear (Rn) Decontamination - 20153

The release of radiological material to the urban environment can have a devastating socio-economic impact. In an urban release scenario, areas around the dispersal epicenter and any areas contaminated via atmospheric deposition may require extensive decontamination. Most recently, our group reported the decontamination efficacy of pressurized water washing of common porous building materials, and compared the penetration depth of the contaminations before and after exposure to pressurized tap water. Here, we continue evaluation of the decontamination efficacy of wash solutions based on potassium (K{sup +}) salt for cesium (Cs), strontium (Sr), and europium (Eu) contaminations on common building surfaces. The surfaces included: the cement used in concrete, the aggregate used in concrete, intact concrete, roadway asphalt, asphalt shingles, and latex paint. We deposited solutions of {sup 137}Cs, {sup 85}Sr, and {sup 152}Eu onto numerous common building materials and exposed these materials to a static bath or low-pressure flow of tap water, 0.1 M potassium chloride (KCl), and 0.5 M KCl. The decontamination efficacy and the depth profile for residual contamination were measured to determine the conditions under which applying a wash solution has benefit compared to physically removing the surface material. To aid in these analyses, we introduced a 'wash penalty factor' to quantify the degree to which contamination migrated into the bulk material by the action of the wash method. On asphalt, 70-80% of the radionuclides were found to be within 0.02 mm of the surface. Cs{sup +} bonded to negative charge sites on the surface of the mineral aggregate (used in concrete) so decontamination was improved by ion exchange with K{sup +}. Sr{sup 2+} is soluble and removed by water, while not bonding to aggregate or demonstrating solubility in the liquid asphalt. Eu{sup 3+} is precipitated and not removed in gentle wash but displays mobility within the pore space that suggests its presence as a colloid. Concrete is more porous than asphalt, and 80% of the radionuclides were within 0.2 mm of the surface for {sup 137}Cs and {sup 152}Eu and 50- 80% for {sup 85}Sr. On concrete, Cs{sup +} bonds similarly to asphalt. Sr{sup 2+} bonds to the cement or precipitates from the alkaline pore water. Eu{sup 3+} sorbs to the cement and then precipitates. In brick, the results for Cs{sup +} and Sr{sup 2+} suggested that diffusion of ions from deeper in the coupon was important. Eu{sup 3+} is removed poorly due to precipitation. We will explain and report example wash penalty factors that vary from 0 to > 1 for the various methods and the implications for deciding when to implement wash down methods. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗

Low temperature water-gas shift: Optimization of K loading on Pt/m-ZrO 2 for enhancing CO conversion

Previous work showed that alkali doping of Pt/ZrO 2 significantly improved the LT-WGS rate. This improvement was caused by an acceleration in the rate of formate decomposition, the rate limiting step of an associative mechanism, through electronically weakening the CH bond. In this study, the effects that potassium loading on Pt/ZrO 2 have on the rate of LT-WGS and the strength of the CH bond in intermediate formate species are explored. Catalysts were investigated using in-situ DRIFTS, TPR-MS, TPD, EXAFS, and catalyst testing. Here, loadings of 1.7 wt.% potassium or higher shifted the formate ν(CH) band to significantly lower wavenumbers, indicating weakening of the bond. For the optimal loading, 2.6 wt.% K, the formate CH bond was significantly weakened, and the surface of Pt nanoparticles remained largely uncovered. However, loadings of 3.4 wt. % and above blocked the surface of the platinum nanoparticles. This, in addition to an increasing average Pt0 cluster size, hindered platinum from assisting in dehydrogenation of formate during steam promoted formate decomposition occurring in LT-WGS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of valinomycin in fibroblasts from patients with fatty acid oxidation disorders

Highlights: •Valinomycin can cause mitochondrial stress and stimulate fatty acid oxidation. •Cells with VLCAD deficiency fail to increase fatty acid oxidation in response to valinomycin. •Response to valinomycin can help in the diagnosis of VLCAD deficiency. -- Abstract: Disorders of the carnitine cycle and of the beta oxidation spiral impair the ability to obtain energy from fats at time of fasting and stress. This can result in hypoketotic hypoglycemia, cardiomyopathy, cardiac arrhythmia and other chronic medical problems. The in vitro study of fibroblasts from patients with these conditions is impaired by their limited oxidative capacity. Here we evaluate the capacity of valinomycin, a potassium ionophore that increases mitochondrial respiration, to increase the oxidation of fatty acids in cells from patients with inherited fatty acid oxidation defects. The addition of valinomycin to fibroblasts decreased the accumulation of the lipophilic cation tetraphenylphosphonium (TPP{sup +}) at low concentrations due to the dissipation of the mitochondrial membrane potential. At higher doses, valinomycin increased TPP{sup +} accumulation due to the increased potassium permeability of the plasma membrane and subsequent cellular hyperpolarization. The incubation of normal fibroblasts with valinomycin increased [{sup 14}C]-palmitate oxidation (measured as [{sup 14}C]O{sub 2} release) in a dose-dependent manner. By contrast, valinomycin failed to increase palmitate oxidation in fibroblasts from patients with very long chain acyl CoA dehydrogenase (VLCAD) deficiency. This was not observed in fibroblasts from patients heterozygous for this condition. These results indicate that valinomycin can increase fatty acid oxidation in normal fibroblasts and could be useful to differentiate heterozygotes from patients affected with VLCAD deficiency.

60 APPLIED LIFE SCIENCES↗

Structure and mechanical properties of aluminosilicate geopolymer composites with Portland cement and its constituent minerals

The compressive strengths and structures of composites of aluminosilicate geopolymer with the synthetic cement minerals C{sub 3}S, beta-C{sub 2}S, C{sub 3}A and commercial OPC were investigated. All the composites showed lower strengths than the geopolymer and OPC paste alone. X-ray diffraction, {sup 29}Si and {sup 27}Al MAS NMR and SEM/EDS observations indicate that hydration of the cement minerals and OPC is hindered in the presence of geopolymer, even though sufficient water was present in the mix for hydration to occur. In the absence of SEM evidence for the formation of an impervious layer around the cement mineral grains, the poor strength development is suggested to be due to the retarded development of C-S-H because of the preferential removal from the system of available Si because geopolymer formation is more rapid than the hydration of the cement minerals. This possibility is supported by experiments in which the rate of geopolymer formation is retarded by the substitution of potassium for sodium, by the reduction of the alkali content of the geopolymer paste or by the addition of borate. In all these cases the strength of the OPC-geopolymer composite was increased, particularly by the combination of the borate additive with the potassium geopolymer, producing an OPC-geopolymer composite stronger than hydrated OPC paste alone.

36 MATERIALS SCIENCE↗

Influence of the w/c ratio on the hydration process of a magnesium phosphate cement and on its retardation by boric acid

Magnesium potassium phosphate cements (MKPCs) are prepared using calcined magnesia (MgO) and an acidic solution of potassium dihydrogen phosphate (KH{sub 2}PO{sub 4}). Their fast setting and high heat of hydration can be problematic when large volumes of materials are produced. Boric acid (B(OH){sub 3}) is thus commonly added as a set retarder. This work investigates MKPC hydration in paste (water-to-cement ratio w/c = 1) and its retardation by B(OH){sub 3}. The precipitation of K-struvite (MgKPO{sub 4}·6H{sub 2}O) is preceded by that of phosphorösslerite (MgHPO{sub 4}·7H{sub 2}O) and Mg{sub 2}KH(PO{sub 4}){sub 2}·15H{sub 2}O. Cattiite (Mg{sub 3}(PO{sub 4}){sub 2}·22H{sub 2}O), an end-product in diluted suspension (w/c = 100), is not observed. B(OH){sub 3} slows down the formation of hydrates in two ways: (i) by stabilizing in solution the cations that outbalance the negative charges of the polyborates formed at pH above 6, and (ii) through the precipitation of an amorphous mineral containing borate and orthophosphate. The first process occurs both in diluted suspensions and pastes, the second is specific to pastes.

36 MATERIALS SCIENCE↗

Elemental Modes of Occurrence in an Illinois #6 Coal and Fractions Prepared by Physical Separation Techniques at a Coal Preparation Plant

In order to gain better insight into elemental partitioning between clean coal and tailings, modes of occurrence have been determined for a number of major and trace elements (S, K, Ca, V, Cr, Mn, Fe, Zn, As, Se, Pb) in an Illinois No.6 coal and fractions prepared by physical separation methods at a commercial coal preparation plant. Elemental modes of occurrence were largely determined directly by XAFS or Moessbauer spectroscopic methods because the concentrations of major minerals and wt.% ash were found to be highly correlated for this coal and derived fractions, rendering correlations between individual elements and minerals ambiguous for inferring elemental modes of occurrence. Of the major elements investigated, iron and potassium are shown to be entirely inorganic in occurrence. Most (90%) of the iron is present as pyrite, with minor fractions in the form of clays and sulfates. All potassium is present in illitic clays. Calcium in the original coal is 80-90% inorganic and is divided between calcite, gypsum, and illite, with the remainder of the calcium present as carboxyl-bound calcium. In the clean coal fraction, organically associated Ca exceeds 50% of the total calcium. This organically-associated form of Ca explains the poorer separation of Ca relative to both K and ash. Among the trace elements, V and Cr are predominantly inorganically associated with illite, but minor amounts (5-15% Cr, 20-30% V) of these elements are also organically associated. Estimates of the V and Cr contents of illite are 420 ppm and 630 ppm, respectively, whereas these elements average 20 and 8 ppm in the macerals. Arsenic in the coal is almost entirely associated with pyrite, with an average As content of about 150 ppm, but some As ({approx} 10%) is present as arsenate due to minor oxidation of the pyrite. The mode of occurrence of Zn, although entirely inorganic, is more complex than normally noted for Illinois basin coals; about 2/3 is present in sphalerite, with lesser amounts associated with illite and a third form yet to be conclusively identified. The non-sulfide zinc forms are removed predominantly by the first stage of separation (rotary breaker), whereas the sphalerite is removed by the second stage (heavy media). Germanium is the only trace element determined to have a predominantly organic association.

01 COAL, LIGNITE, AND PEAT↗

Photoionization of seeded combustion products as a method of enhancing the efficiency of magnetohydrodynamic power generators

Here, in this study, we performed an experimental and computational investigation into the feasibility of utilizing photoionization to enhance the electrical conductivity of seeded oxy-fuel combustion products and improve the performance of magnetohydrodynamic (MHD) power generators. We applied a variety of optical and microwave diagnostics to study the ionization and recombination processes of potassium excited by an excimer laser in a high-velocity oxy-fuel free jet. Computational fluid dynamic (CFD) simulations were performed to model the thermophysical properties and species densities of the free jet. The CFD results were validated with position-dependent potassium concentration measurements. Electron recombination exponential lifetimes were measured through time-resolved microwave transmission. The experimental electron lifetimes were compared with lifetimes calculated from CFD-predicted species densities and literature recombination rates. It was determined that K + or O 2 are the most likely recombination partners for photoionized electrons. Time-resolved fluorescence measurements provided evidence of an ionization pathway involving a two-photon ionization of KOH . Finally, a zero-dimensional chemical kinetic model was developed to assess the fundamental viability of inducing a non-equilibrium electron population to provide a net energy return in combustion-driven MHD power generators. We determined that a high energy return is feasible for targeting electrode boundary layers with ultraviolet photoionization. We also found that photoionization could potentially lower the required temperature of the bulk gas flow.

20 FOSSIL-FUELED POWER PLANTS↗

X-Ray Fluorescence Microscopy: A Method of Measuring Ion Concentrations in the Ear

This technical note describes synchrotron x-ray fluorescence microscopy (XFM) as a method for measuring the concentrations of various elements in cross-sections of the ear at extremely high resolution. This method could be of great importance for addressing many open questions in hearing research. XFM uses synchrotron radiation to evoke emissions from many biologically relevant elements in the tissue. The intensity and wavelength of the emitted radiation provide a fingerprint of the tissue composition that can be used to measure the concentration of the elements in the sampled location. Here, we focus on energies that target biologically-relevant elements of the periodic table between magnesium and zinc. Since a highly focused x-ray beam is used, the spot size is well below 1 mu m and the samples can be scanned at a nanometer lateral resolution. This study shows that measurement of the concentrations of different elements is possible in a mid-modiolar cross-section of a mouse cochlea. Images are presented that indicate potassium and chloride "hot spots" in the spiral ligament and the spiral limbus, providing experimental evidence for the potassium recycling pathway and showing the cochlear structures involved. Scans of a section obtained from the incus, one of the middle ear ossicles, in a developing mouse have shown that zinc is not uniformly distributed This supports the hypothesis that zinc plays a special role in the process of ossification. Although limited by sophisticated sample preparation and sectioning, the method provides ample exciting opportunities, to understand the role of genetics and epigenetics on hearing mechanisms in ontogeny and phylogeny.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrothermal synthesis and characteristics of 3-D hydrated bismuth oxalate coordination polymers with open-channel structure

Two new 3-D porous bismuth coordination polymers, (C{sub 5}NH{sub 6}){sub 2}[Bi{sub 2}(H{sub 2}O){sub 2}(C{sub 2}O{sub 4}){sub 4}].2H{sub 2}O 1 and (NH{sub 4})[Bi(C{sub 2}O{sub 4}){sub 2}].3H{sub 2}O 2, have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic symmetry, P2{sub 1}/c space group with a=10.378(2) A, b=17.285(3) A, c=16.563(5) A, {alpha}=90 deg., {beta}=119.66(2) deg., {gamma}=90 deg., V=2581.8(10) A{sup 3}, Z=4, R{sub 1}=0.0355 and wR{sub 2}=0.0658 for unique 4713 reflections I >2{sigma}(I). Compound 2 crystallizes in the tetragonal symmetry, I4{sub 1}/amd space group with a=11.7026(17) A, b=11.7026(17) A, c=9.2233(18) A, {alpha}=90 deg., {beta}=90 deg., {gamma}=90 deg., V=1263.1(4) A{sup 3}, Z=32, R{sub 1}=0.0208 and wR{sub 2}=0.0518 for unique 359 reflections I> 2{sigma}(I). Compounds 1 and 2 are 3-D open-framework structures with a 6{sup 6} uniform net, which consist of honeycomb-like layers connected to each other by oxalate units. While different guest molecules fill in their cavities of honeycomb-like layers, study of ultrasonic treatment on 2 indicates the replacement of NH{sub 4}{sup +} by K{sup +} on potassium ion exchange. Thermogravimetric analysis indicates that the open-channel frameworks are thermally stable up to 200 deg. C, and other characterizations are also described by elemental analysis, IR and ultraviolet-visible diffuse reflectionintegral spectrum (UV-Vis DRIS). - Graphical abstract: Two novel 3-D extended porous coordination polymers have been synthesized by hydrothermal method. Both compounds are 3-D open-framework structures with a 6{sup 6} uniform net, which consist of honeycomb-like layers connected to each other by oxalate units. While different guest molecules fill in their cavities of honeycomb-like layers. Study of ultrasonic treatment on 2 indicates the replacement of NH{sub 4}{sup +} by K{sup +} on potassium ion exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase relations in the K{sub 2}W{sub 2}O{sub 7}-K{sub 2}WO{sub 4}-KPO{sub 3}-Bi{sub 2}O{sub 3} system and structure of K{sub 6.5}Bi{sub 2.5}W{sub 4}P{sub 6}O{sub 34}

The phase relations in the cross-section of the K{sub 2}W{sub 2}O{sub 7}-K{sub 2}WO{sub 4}-KPO{sub 3} containing 15 mol% Bi{sub 2}O{sub 3} were undertaken using flux method. Crystallization fields of K{sub 6.5}Bi{sub 2.5}W{sub 4}P{sub 6}O{sub 34}, K{sub 2}Bi(PO{sub 4})(WO{sub 4}), Bi{sub 2}WO{sub 6}, KBi(WO{sub 4}){sub 2} and their cocrystallization areas were identified. Novel phase K{sub 6.5}Bi{sub 2.5}W{sub 4}P{sub 6}O{sub 34} was characterized by single-crystal X-ray diffraction: sp. gr. P-1, a=9.4170(5), b=9.7166(4), c=17.6050(7) A, {alpha}=90.052(5){sup o}, {beta}=103.880(5){sup o} and {gamma}=90.125(5){sup o}. It has a layered structure, which contains {l_brace}K{sub 7}Bi{sub 5}W{sub 8}P{sub 12}O{sub 68}{r_brace}{sub {infinity}} layers stacked parallel to ab plane and sheets composed by potassium atoms separating these layers. Sandwich-like {l_brace}K{sub 7}Bi{sub 5}W{sub 8}P{sub 12}O{sub 68}{r_brace}{sub {infinity}} layers are assembled from [W{sub 2}P{sub 2}O{sub 13}]{sub {infinity}} and [BiPO{sub 4}]{sub {infinity}} building units, and are penetrated by tunnels with K/Bi atoms inside. FTIR-spectra of K{sub 2}Bi(PO{sub 4})(WO{sub 4}) and K{sub 6.5}Bi{sub 2.5}W{sub 4}P{sub 6}O{sub 34} were discussed on the basis of factor group theory. - Graphical abstract: Sandwich-like architecture of K{sub 6.5}Bi{sub 2.5}W{sub 4}P{sub 6}O{sub 34} prepared during high-temperature investigation of K{sub 2}W{sub 2}O{sub 7}-K{sub 2}WO{sub 4}-KPO{sub 3} system. It is organized from {l_brace}K{sub 7}Bi{sub 5}W{sub 8}P{sub 12}O{sub 68}{r_brace}{sub {infinity}} layers and potassium atom sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel microporous zirconium silicate (K{sub 2}ZrSi{sub 3}O{sub 9}.2H{sub 2}O) from high temperature phase transformation

A new microporous zirconosilicate K{sub 2}ZrSi{sub 3}O{sub 9}.2H{sub 2}O (AV-15) has been prepared by high-temperature phase transformation at 910 {sup o}C. Its structure has been determined ab initio from powder X-ray diffraction data. The unit cell is orthorhombic, space group C222{sub 1} (no. 20), Z=4 with cell dimensions: a=8.105(3), b=10.684(5), c=12.030(5) A, V=1041.76(7) A{sup 3}. The framework connection of AV-15 is essentially the same as the previously reported sodium stannosilicate AV-10 while the locations of potassium and water molecules in the former are quite different from those of the sodium and water molecules in AV-10. In AV-10 sodium and water molecules form a sinucoidal chain, while potassium and water molecules build up a linear chain in AV-15. The water molecules in AV-15 are lost on heating with a typical zeolitic behaviour. SEM shows that the particle sizes and habits of AV-15 and parent umbite material are the same. The {sup 29}Si MAS NMR spectrum of AV-15 displays two resonances at ca. -89.4 and -90.1 ppm in a 1:2 intensity ratio. Thermogravimetry analysis confirms the existence of water in this material. -- Graphical abstract: A new microporous zirconosilicate has been prepared by high temperature phase transformation at 910 {sup o}C. Its structure has been determined ab initio from powder X-ray diffraction data. The water molecules in this material are lost below 125 {sup o}C in a way typical of zeolites and molecular sieves. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of nano ZnO rods via microwave assisted chemical precipitation method

A microwave assisted chemical precipitation method has been employed for the synthesis of nano zinc oxide rods by reacting zinc nitrate and potassium hydroxide. The amount of potassium hydroxide was adjusted for three different pHs to achieve ZnO nano rods with varying aspect ratio. The mechanism of growth of nano rods is explained briefly. The average crystallite size of the as synthesized samples was analyzed by means of powder XRD pattern and estimated to vary from 25.6 nm to 43.1 nm. The existence of rods was confirmed using scanning electron microscopy (SEM). The samples were also analyzed using FT-IR. The optical properties of the samples were also studied by means of UV-visible spectra and Room Temperature Photo Luminescence studies. The band gap of the samples was determined from the DRS spectrum. A strong near band emission peaks due to surface defects are observed in the PL spectrum. - Graphical abstract: At the solution pH of 11 and 9, tetrapod-like and flower-like ZnO nano rods were formed along with separated rods respectively due to the formation of activated nuclei of different sizes. Highlights: Black-Right-Pointing-Pointer Increase in alkalinity of the precursor solution results in longer rods. Black-Right-Pointing-Pointer Beyond a saturation limit, the excess of added OH{sup -} ions inhibited the growth of rods. Black-Right-Pointing-Pointer Keeping all parameters the same, the alkalinity can only modify the aspect ratio of the rods and not their morphology.

36 MATERIALS SCIENCE↗

Synthesis of Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}} electrocatalysts by mechanical activation

Potassium-substituted SrFeO{sub 3-{delta}} for possible application as oxygen evolution electrode in alkaline or molten salt media was prepared by mechanical activation and characterized by X-ray diffraction, dilatometric and thermogravimetric analysis, Moessbauer spectroscopy, and electrical conductivity measurements. Room temperature mechanical activation of a mixture of oxide precursors with subsequent thermal treatments at 700-900 Degree-Sign C results in the formation of Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}} with tetragonal perovskite-like structure. Such allows to decrease the synthesis temperature, if compared to the conventional solid-state route, and to prevent possible volatilization of potassium. The results of Moessbauer spectroscopy studies indicate that the oxygen nonstoichiometry in the samples annealed in air at 900-1100 Degree-Sign C with subsequent rapid cooling vary in the range {delta}=0.30-0.32. The electrical conductivity in air exhibits a metal-like behaviour at temperatures above 400 Degree-Sign C and semiconductor behaviour in the low-temperature range, reaching 13-30 S/cm under prospective operation conditions for alkaline electrolyzers ({<=}90 Degree-Sign C). - graphical abstract: XRD patterns of Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}} powders, as-prepared and after annealing at different temperatures. Log({sigma}{center_dot}T) vs. 1000/T plot of the electrical conductivity of Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}}. The inset shows the thermal variation of {sigma}. Ceramics used were prepared by mechanical activation followed by a two-step sintering process at 900 Degree-Sign C for 1 h and 1000 Degree-Sign C for 5 h (82% densification). Highlights: Black-Right-Pointing-Pointer Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}} was successfully obtained by mechanical activation of oxide precursors. Black-Right-Pointing-Pointer Synthesis temperature is significantly lower when compared to a conventional solid-state route. Black-Right-Pointing-Pointer Oxygen nonstoichiometry of annealed samples at 900-1100 Degree-Sign C vary in the range {delta}=0.30-0.32. Black-Right-Pointing-Pointer Sr{sub 0.9}K{sub 0.1}FeO{sub 3-{delta}} shows metal and semiconductor behaviour above and below 400 Degree-Sign C, respectively.

36 MATERIALS SCIENCE↗