Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Non-spectroscopic composition measurements of SrTiO 3 -La 0.7 Sr 0.3 MnO 3 multilayers using scanning convergent beam electron diffraction

The local atomic structure of a crystalline sample aligned along a zone axis can be probed with a focused electron probe, which produces a convergent beam electron diffraction pattern. The introduction of high speed direct electron detectors has allowed for experiments that can record a full diffraction pattern image at thousands of probe positions on a sample. By incoherently summing these patterns over crystalline unit cells, we demonstrate in this paper that in addition to crystal structure and thickness, we can also estimate the local composition of a perovskite superlattice sample. This is achieved by matching the summed patterns to a library of simulated diffraction patterns. Finally, this technique allows for atomic-scale chemical measurements without requiring a spectrometer or hardware aberration correction.

74 ATOMIC AND MOLECULAR PHYSICS↗

Microstructural and Superconducting Radiofrequency Properties of Multilayer Sequentially Sputtered Nb 3 Sn films

Nb 3 Sn is considered as a potential candidate for superconducting radiofrequency cavities for particle acceleration due to its higher transition temperature of 18.3 K and higher superheating field of 400 mT. Nb 3 Sn films can be grown inside the surface of a Nb cavity by sequentially sputtering multiple layers of Nb and Sn thin films followed by annealing at 950 °C for 3 h. We report on the properties of Nb 3 Sn films grown on Nb substrates by magnetron sputtering. The films’ crystal structure, surface morphology, and composition were characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The films had a polycrystalline Nb 3 Sn structure with a fine-grain surface and an atomic Sn composition of ~23%. The RF surface resistance of the films was measured for different temperatures at 7.4 GHz to understand the feasibility of this method for the SRF application. The RF surface resistance of the films was 5 mΩ at 12 K, which is about 2 orders of magnitude higher than 60 μΩ previously measured in Nb 3 Sn films grown by Sn vapor diffusion. Finally, the sputtered film had a superconducting transition at 17.2 K, which is also lower than 17.9 K observed in Nb 3 Sn film prepared by vapor diffusion.

43 PARTICLE ACCELERATORS↗

Indentation and overall compression behavior of multilayered thin-film composites. Effect of undulating layer geometry

Two finite element models are used to investigate the behavior of aluminum/silicon carbide thin-film layered composites with imperfect internal geometry when subjected to various loadings. In both models, undulating layers are represented by regular waveforms with various amplitudes, wavelengths, and phase offsets. First, uniaxial compressive loading of the composite is considered. The modulus and stress/strain response of the composite is sensitive to both loading direction and frequency of the undulation. Second, the nanoindentation response of the composite is investigated. The derived hardness and modulus are shown to be sensitive to the presence of undulating layers and the relative size of the indenter to the undulation. Undulating layers create bands of tensile and compressive stress in the indentation direction that are significantly different from the flat layers. The amount of equivalent plastic strain in the Al layers is increased by the presence of undulating layers. The correlations between the two forms of loading, and the implications to composite property measurement are carefully examined in this study.

36 MATERIALS SCIENCE↗

Protective coatings with nanoscale multilayer architecture: current state and main trends

Binary systems (layers) and multicomponent layers with bilayer thicknesses varying from microns to a few nanometers are considered. A strong dependence of the microstructure formation on the deposition conditions (the magnitude of the bias potential, the flow of inert and reactive gases, the ion beam power (current density) supplied to the target) is found. General regularities in the change in the functional properties and structural state of the coatings are formulated. The conditions for the formation of a columnar structure and growth texture are noted; various mechanisms and their interpretation are proposed. Finally, the relationship among the size of nanograins, diffusion at the interphase boundary, and effects determining the physico-mechanical, tribological characteristics, as well as resistance to corrosion and oxidation, is shown.

36 MATERIALS SCIENCE↗

Interlamellar Organization of Phase Separated Domains in Multi-Component Lipid Multilayers: Energetic Considerations

A recent experimental study [1] has demonstrated the alignment of phase separated domains across hundreds of bilayer units in multicomponent stacked lipid bilayers. The origin of this alignment is the interlamellar coupling of laterally phase separated domains. Here, we develop a theoretical model that presents the energetics description of this phenomenon based on the minimization of the free energy of the system. Specifically, we use solution theory to estimate the competition between energy and entropy in different stacking configurations. The model furnishes an elemental phase diagram, which maps the domain distributions in terms of the strength of the intra- and inter-layer interactions and estimates the value of inter-layer coupling for complete alignment of domains in the stacks of five and ten bilayers. The area fraction occupied by co-existing phases was calculated for the system of the minimum free energy, which showed a good agreement with experimental observations.

lipid rafts↗

Shear Band Formation in Thin-Film Multilayer Columns Under Compressive Loading: A Mechanistic Study

Micro-pillar compression is a popular experimental technique used for characterizing the mechanical behavior of nano- and micro-laminates. The compressive stress–strain response of the column-shaped thin-film composite can be measured, and the deformation and damage features can be revealed by post-test cross-section microscopy. The development of plastic instability in the form of localized strain concentration (shear bands), leading to eventual failure, is frequently observed. In the present study, a computational approach is used to illustrate the commonality of shear band formation from a continuum standpoint. Systematic finite element analyses are conducted, showing that the strain field tends to become localized once plastic yielding commences. Distinct shear offsets of the layered structure can be revealed from the numerical model, which is similar to those observed in experiments. The actual appearance of shear bands depends on the materials’ constitutive behavior and precise geometries. Post-yield strain hardening reduces the propensity of shear band formation, while strain softening enhances it. Imperfections such as the undulated layer geometry, as well as the frictional characteristics between the specimen and test apparatus, can also influence the shear band morphology and overall stress–strain response.

finite element modeling↗

Characterization of electron microscopes with binary pseudo-random multilayer test samples

We discuss the results of SEM and TEM measurements with the BPRML test samples fabricated from a BPRML (WSi2/Si with fundamental layer thickness of 3 nm) with a Dual Beam FIB (focused ion beam)/SEM technique. In particular, we demonstrate that significant information about the metrological reliability of the TEM measurements can be extracted even when the fundamental frequency of the BPRML sample is smaller than the Nyquist frequency of the measurements. The measurements demonstrate a number of problems related to the interpretation of the SEM and TEM data. Note that similar BPRML test samples can be used to characterize x-ray microscopes. Corresponding work with x-ray microscopes is in progress.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Processing of Dilute Mg–Zn–Mn–Ca Alloy/Nb Multilayers by Accumulative Roll Bonding

Recent advancements in the severe plastic deformation process called accumulative roll bonding (ARB) can help to address the long-standing need for manufacturing lightweight, high-strength Mg sheet materials. However, the fabrication of Mg alloy-based laminates via ARB remains a challenge due to the intrinsically poor formability of Mg. Herein, it is shown that Mg-based composite laminates with refined layers can be fabricated via several room-temperature ARB cycles with appropriate intermediate annealing and alloy selection. The final laminates made here consist of equal volume fractions of a dilute Mg–Zn–Mn–Ca alloy phase and a pure Nb phase with fine 150 μm layer thicknesses. Deformation texture evolution in both phases within the composite is analyzed via neutron diffraction measurements taken at different stages in the process. The analysis suggests that the annealing step recrystallizes the Mg-alloy phase. It is also shown that for both phases, the stabilized deformation textures within the composite correspond to the classic stable textures of the individual constituents. Polycrystal texture modeling implies that {10–12} <-1011> extension twinning developed in the Mg alloy during rolling.

36 MATERIALS SCIENCE↗

Super Gas Barrier and Fire Resistance of Nanoplatelet/Nanofibril Multilayer Thin Films

Abstract Cellulose nanofibrils (CNF) are abundant in the fiber cell walls of many plants and are considered a nearly inexhaustible resource. With the goal of improving the flame resistance and gas barrier properties of cellulose‐based films, cationic CNF are assembled with anionic vermiculite (VMT) clay using the layer‐by‐layer deposition process. The highly aligned VMT nanoplatelets, together with cellulose nanofibrils, form a nanobrick wall structure that exhibits high optical transparency, flame resistance, super oxygen barrier, and high modulus. A 20 CNF/VMT bilayer (BL) nanocoating, with a thickness of only 136 nm, exhibits an oxygen transmission rate of 0.013 cc (m 2 day atm) –1 . With only 2 BL of CNF/VMT, the melting of flexible polyurethane foam exposed to a butane torch is prevented. These nanocoatings also exhibit a high elastic modulus (20 GPa) and hardness (1 GPa). This study demonstrates a unique, renewable, cellulose‐based nanocoating that could be used in a variety of packaging and protection applications.

Qin, Shuang↗

Evolution of the Electronic Gap of Directly Synthesized Versus Mechanically Transferred WS 2 Monolayer to Multilayer Films

The electronic properties of 2D materials play a critical role in determining their potential for device applications. Despite rapid developments in 2D semiconductors, studies of fundamental electronic parameters, including the electronic gap and ionization energy, are limited, with significant discrepancies in reported values. The study focuses on tungsten disulfide (WS₂) and investigates the electronic structure of films comprising an increasing number of layers deposited with two different methods: direct synthesis via metal–organic chemical vapor deposition (MOCVD) and additive mechanical transfer of exfoliated single layers. The films are characterized via Raman, UV–vis, and photoluminescence spectroscopies, as well as ultraviolet photoelectron and inverse photoemission spectroscopies (UPS/IPES). The electronic gap of WS₂ is found to decrease from 2.43 eV for the monolayer to 1.97 eV for the trilayer, indicating a bulk transition at the trilayer thickness. This reduction in the electronic gap is primarily due to the downward shift of the conduction band minimum relative to the valence band maximum. A comparative analysis with MOCVD-grown WS₂ reveals a slightly larger electronic gap for MOCVD-grown samples, attributed to differences in defect densities. The electronic levels evaluated through UPS/IPES highlight the significant influence of preparation methods on the electronic properties of WS₂.

2D materials↗

Regulating the Third Metal to Design and Engineer Multilayered NiFeM (M: Co, Mn, and Cu) Nanofoam Anode Catalysts for Anion-Exchange Membrane Water Electrolyzers

In this study, alkaline anion-exchange membrane water electrolyzers (AEMWEs) for green hydrogen production have received intensive attention due to their feasibility of using earth-abundant platinum group metal (PGM)-free catalysts. Herein, the third metal is incorporated into NiFe-based catalysts to regulate their electronic structures and morphologies, aiming to achieve sufficient oxygen evolution reaction (OER) activity and performance in AEMWEs. The ternary NiFeM (M: Cu, Co, or Mn) catalysts are featured with multiple layered structures and nanofoam network morphologies, consisting of highly OER-active amorphous Ni-rich oxide shells and electrically conductive metallic alloy cores. The physical and electronic perturbations to the NiFe induced by a third element lead to a fine-tuning of the redox ability of the metal sites at the reaction centers, which breaks the scaling relationship between OH* and O* intermediates at the reaction centers. Thus, the unique structural configuration and electronic regulation simultaneously benefit catalytic activity and performance improvements. These NiFeM nanofoam catalysts demonstrated promising anode performance in actual AEMWEs, comparable to the IrO 2 reference, especially at high current densities. Notably, using various electrolytes (e.g., KOH solution or pure water) for AEMWEs exhibited a different performance trend among studied NiFeM catalysts, likely due to dynamic changes of catalysts under various OER environments.

25 ENERGY STORAGE↗

Integrated simulations of CO 2 spreading and pressure response in the multilayer saline aquifer of South Scania Site, Sweden

In this paper, an integrated modeling approach/workflow, in which a series of mathematical models of different levels of complexity are applied to evaluate the geological storage capacity of the Scania Site, southwest Sweden, is presented. The storage formation at the site is a layered formation limited by bounding fault zones, and injection is assumed to take place from one existing deep borehole into all layers. A semi-analytical model for two-phase flow is first used to evaluate the pressure response and related parameter sensitivity, as well as the first estimates of acceptable injection rates. These results are then used to guide the more detailed numerical simulations that address both pressure response and plume migration. The vertical equilibrium (VE) model is used to obtain a preliminary understanding of the plume migration with a larger number of simulations. Finally the full TOUGH2/ECO2N simulations are performed for the most detailed analyses of pressure responses and plume migration. Throughout, the results of the different modeling approaches are compared to each other. It is concluded that the key limiting factor for the storage capacity at the site in the injection scenario considered is the fast CO 2 migration within the high permeability layer. Finally, future studies can address alternative injection scenarios, including using horizontal injection wells and injection to other layers than the high permeability layer.

54 ENVIRONMENTAL SCIENCES↗