Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Milling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Discovery of the luminous X-ray ignition eRASSt J234402.9-352640: I. Tidal disruption event or a rapid increase in accretion in an active galactic nucleus?

In November 2020, a new, bright object, eRASSt J234402.9-352640, was discovered in the second all-sky survey of SRG/eROSITA. The object brightened by a factor of at least 150 in 0.2–2.0 keV flux compared to an upper limit found six months previous, reaching an observed peak of 1.76 -0.24 +0.03 × 10 -11 erg cm -2 s -1 . The X-ray ignition is associated with a galaxy at z = 0.10, making the peak luminosity log 10 (L 0.2-2 keV /[erg s -1 ]) = 44.7 ± 0.1. Around the time of the rise in X-ray flux, the nucleus of the galaxy brightened by approximately 3 mag. in optical photometry, after correcting for the host contribution. We present X-ray follow-up data from Swift, XMM-Newton, and NICER, which reveal a very soft spectrum as well as strong 0.2–2.0 keV flux variability on multiple timescales. Optical spectra taken in the weeks after the ignition event show a blue continuum with broad, asymmetric Balmer emission lines, and high-ionisation ([OIII]λλ4959,5007) and low-ionisation ([NII]λ6585, [SII]λλ6716,6731) narrow emission lines. Following the peak in the optical light curve, the X-ray, UV, and optical photometry all show a rapid decline. The X-ray light curve shows a decrease in luminosity of ~0.45 over 33 days and the UV shows a drop of ~0.35 over the same period. eRASSt J234402.9-352640 also shows a brightening in the mid-infrared, likely powered by a dust echo of the luminous ignition. We find no evidence in Fermi-LAT γ-ray data for jet-like emission. The event displays characteristics of a tidal disruption event (TDE) as well as of an active galactic nucleus (AGN), complicating the classification of this transient. Based on the softness of the X-ray spectrum, the presence of high-ionisation optical emission lines, and the likely infrared echo, we find that a TDE within a turned-off AGN best matches our observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Counterpart identification and classification for eRASS1 and characterisation of the active galactic nuclei content

Context. Accurately accounting for the Active Galactic Nucleus (AGN) phase in galaxy evolution requires a large, clean AGN sample. This is now possible with SRG/eROSITA, which completed its first all-sky X-ray survey (eRASS1) on June 12, 2020. The public Data Release 1 (DR1, Jan 31, 2024) includes 930,203 sources from the western Galactic hemisphere. Aims. The data enable the selection of a large AGN sample and the discovery of rare sources. However, scientific return depends on accurate characterisation of the X-ray emitters, requiring high-quality multi-wavelength data. This paper presents the identification and classification of optical and infrared counterparts to eRASS1 sources. Methods. Counterparts to eRASS1 X-ray point sources were identified using Gaia DR3, CatWISE2020, and Legacy Survey DR10 (LS10) with the Bayesian NWAY algorithm and trained priors. Sources were classified as Galactic or extragalactic via a machine-learning model combining optical/IR and X-ray properties, trained on a reference sample. For extragalactic LS10 sources, photometric redshifts were computed using CIRCLEZ. Results. Within the LS10 footprint, all 656,614 eROSITA/DR1 sources have at least one possible optical counterpart; ∼570 000 are extragalactic and likely AGN. Half are new detections compared to AllWISE, Gaia, and Quaia AGN catalogues. Gaia and CatWISE2020 counterparts are less reliable, due to the survey’s shallowness and the limited amount of features available to assess the probability of being an X-ray emitter. In the Galactic plane, where the overdensity of stellar sources also increases the chance of associations, using conservative reliability cuts, we identified approximately 18 000 Gaia and 55 000 CatWISE2020 extragalactic sources. Conclusions. We have released three high-quality counterpart catalogues – plus the training and validation sets – as a benchmark for the field. These datasets have many applications, but in particular, they empower researchers to build AGN samples tailored for completeness and purity, accelerating the hunt for the Universe’s most energetic engines.

X-rays: general↗

Chemical templates of the Central Molecular Zone

Context . The Central Molecular Zone (CMZ) of the Milky Way exhibits extreme conditions, including high gas densities, elevated temperatures, enhanced cosmic-ray ionization rates, and large-scale dynamics. This makes it a perfect laboratory for astrochemical studies. With large-scale molecular surveys revealing increasing chemical and physical complexity in the CMZ, it is essential to develop robust methods to decode the chemical information embedded in this extreme region. Aims . A key step to interpreting the molecular richness found in the CMZ is building chemical templates tailored to its diverse conditions. In particular, understanding how CMZ environments affect shock and protostellar chemistry is crucial. The combined impact of high ionization, elevated temperatures, and dense gas remains insufficiently explored for observable tracers. Methods . For this study, we utilized UCLCHEM , a gas-grain time-dependent chemical model, to link physical conditions with their corresponding molecular signatures and identify key tracers of temperature, density, ionization, and shock activity. To achieve this, we ran a grid of models of shocks and protostellar objects representative of typical CMZ conditions, focusing on 24 species, including complex organic molecules. Results . Shocked and protostellar environments show distinct evolutionary timescales (≲10 4 vs. ≳10 4 years); 300 K emerges as a key temperature threshold for chemical differentiation. We find that cosmic-ray ionization and temperature are the main drivers of chemical trends. HCO + , H 2 CO, and CH 3 SH trace ionization, while HCO, HCO + , CH 3 SH, CH 3 NCO, and HCOOCH 3 show consistent abundance contrasts between shocks and protostellar regions over similar temperature ranges. Conclusions . We characterized the behavior of 24 species in protostellar and shock-related environments. While our models underpredict some complex organics in shocks, they reproduce observed trends for most species, supporting scenarios involving a need for recurring shocks in Galactic Center clouds and enhanced ionization toward Sgr B2(N2). Future work should assess the role of shock recurrence and metallicity in shaping chemistry.

Galaxy: center↗

Overview of the OECD-NEA Working Party on International Nuclear Data Evaluation Cooperation (WPEC)

The OECD Nuclear Energy Agency (NEA) Working Party on International Nuclear Data Evaluation Cooperation (WPEC) was established in 1989 to facilitate collaboration in nuclear data activities. Over its thirty year history, different Subgroups have been created to address topics in nearly every aspect of nuclear data, including: experimental measurements, evaluation, validation, model development, quality assurance of databases and the development of software tools. WPEC has recently completed activities on fission yield evaluation, the general nuclear database structure (GNDS) to replace the ENDF-6 format, methods to provide feedback to evaluation, studies of specific capture cross sections, new methods in thermal scattering kernel evaluation and the Collaborative International Evaluated Library Organisation (CIELO) Pilot Project. Ongoing activities in GNDS application programming interface (API) development, methods for covariance evaluation and quality assurance in nuclear data validation using the International Criticality Safety Benchmark Evaluation Project (ICSBEP) database are complemented by the work of two Expert Groups that oversee the High-Priority Request List (HPRL) for Nuclear Data and the continuous development of the GNDS. New activities on the use of integral experiments for nuclear data validation and adjustment, as well as the use of the Shielding Integral Benchmark Archive and Database (SINBAD) for validation have begun and will be coordinated alongside future Subgroups. After three decades we will review the status of WPEC, how it integrates other collections and activities organised by the NEA and how it dovetails with the initiatives of the IAEA and other bodies to effectively coordinate international activities in nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Actinide oxide dissolution in tributyl phosphate

An alternative to dissolving used nuclear fuel (UNF) in an acidic solution during reprocessing is direct dissolution in an organic solution, which would eliminate an aqueous dissolution step, decrease the amount of nitrate needed, and reduce the facility size. The flowsheet for this potentially less expensive alternative is first to voloxidize the UNF to remove fission product gases and form an oxide. After voloxidation, the UNF is then dissolved in an organic solution containing an extractant mixed with an aliphatic diluent and pre-equilibrated with nitric acid. The organic solution then goes through a solvent extraction process to recover the uranium and/or other desired radionuclides. This work qualitatively studied the dissolution of actinide oxides (UO2, NpO2, and PuO2) in tributyl phosphate using UV-Vis-NIR absorbance spectroscopy to ascertain dissolution behavior. Initial studies included material that is otherwise difficult to dissolve in only nitric acid, specifically CeO2, that is sometimes used as a dissolution surrogate for PuO2. This work confirmed that CeO2, NpO2, and PuO2 are difficult to dissolve in 30 vol% TBP-dodecane pre-equilibrated with 10 M HNO3 and will readily dissolve when co-precipitated with U (i.e., the mixed oxides U-Ce, U-Np, and U-Pu), surrogates for voloxidized nuclear fuel.

Gogolski, Jarrod [Savannah River National Laborato↗

An introduction to Spent Nuclear Fuel decay heat for Light Water Reactors: a review from the NEA WPNCS

This paper summarized the efforts performed to understand decay heat estimation from existing spent nuclear fuel (SNF), under the auspices of the Working Party on Nuclear Criticality Safety (WPNCS) of the OECD Nuclear Energy Agency. Needs for precise estimations are related to safety, cost, and optimization of SNF handling, storage, and repository. The physical origins of decay heat (a more correct denomination would be decay power) are then introduced, to identify its main contributors (fission products and actinides) and time-dependent evolution. Due to limited absolute prediction capabilities, experimental information is crucial; measurement facilities and methods are then presented, highlighting both their relevance and our need for maintaining the unique current full-scale facility and developing new ones. The third part of this report is dedicated to the computational aspect of the decay heat estimation: calculation methods, codes, and validation. Different approaches and implementations currently exist for these three aspects, directly impacting our capabilities to predict decay heat and to inform decision-makers. Finally, recommendations from the expert community are proposed, potentially guiding future experimental and computational developments. One of the most important outcomes of this work is the consensus among participants on the need to reduce biases and uncertainties for the estimated SNF decay heat. If it is agreed that uncertainties (being one standard deviation) are on average small (less than a few percent), they still substantially impact various applications when one needs to consider up to three standard deviations, thus covering more than 95% of cases. The second main finding is the need of new decay heat measurements and validation for cases corresponding to more modern fuel characteristics: higher initial enrichment, higher average burnup, as well as shorter and longer cooling time. Similar needs exist for fuel types without public experimental data, such as MOX, VVER, or CANDU fuels. A third outcome is related to SNF assemblies for which no direct validation can be performed, representing the vast majority of cases (due to the large number of SNF assemblies currently stored, or too short or too long cooling periods of interest). A few solutions are possible, depending on the application. For the final repository, systematic measurements of quantities related to decay heat can be performed, such as neutron or gamma emission. This would provide indications of the SNF decay heat at the time of encapsulation. For other applications (short- or long-term cooling), the community would benefit from applying consistent and accepted recommendations on calculation methods, for both decay heat and uncertainties. This would improve the understanding of the results and make comparisons easier.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The 0E2 benchmarks for PWR UO 2 decay heat: an analysis from the NEA WPNCS

This paper presents the work performed in the subgroup 16 of the Working Party for Nuclear Criticality Safety (WPNCS) of the OECD Nuclear Energy Agency. The main goal was to define two decay heat benchmarks for Spent Nuclear Fuel (one pincell and one assembly), perform calculations and compare and analyze the results in light of existing calorimetric measurements. The selected case is the PWR UO2 assembly 0E2, irradiated at the Ringhals-3 reactor and measured at the Clab facility in Sweden. In total, 21 institutes worldwide participated to the exercise, leading to 55 calculated results (named C). It was found that the measured decay heat values (E) can be satisfactorily reproduced with two-dimensional assembly calculations, leading to an average C/E value of 0.99, with an uncertainty (or one standard deviation) of ±0.01.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The fast camera (Fastcam) imaging diagnostic systems on the DIII-D tokamak

Two camera systems are installed on the DIII-D tokamak at the toroidal positions of 90° (90° system) and 225° (225° system), respectively. The cameras have two types of relay optics, namely, a coherent optical fiber bundle and a periscope system. The periscope system provides absolute intensity calibration stability while sacrificing resolution (10 lp/mm), while the fiber system provides high resolution (16 lp/mm) while sacrificing calibration stability. The periscope is available only for the 90° system. The optics of the 225° system were designed for view stability, repeatability, and easy maintenance. The cameras are located inside optimized neutron, x ray and magnetic shielding in order to reduce electronics damage, reboots, and magnetic and neutron interference, increasing the overall system reliability. An automated filter wheel, providing remote filter change, allows for remote wavelength selection. A software suite automates camera acquisition and data storage, allowing for remote operation and reduced operator involvement. System metadata is used to streamline the data analysis workflow, particularly for intensity calibration. Here, the spatial calibration uses multiple observable wall features, resulting in a reconstruction accuracy ≤2 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal deflection in neutron scattering sample environments at Oak Ridge National Laboratory

The neutron sources at Oak Ridge National Laboratory use a wide suite of sample environment equipment to deliver extreme conditions for a number of experiments. Much of this instrumentation focuses on extremes of temperature, such as cryostats, closed-cycle refrigerators in both low and high temperature configurations, and radiant heating furnaces. When the temperature is controlled across a large range, thermal deflection effects can notably move the sample and affect its alignment in the beam. Here, we combine these sample environments with neutron imaging and machine vision to determine the motion of a representative sample with respect to the neutron beam. We find vertical sample displacement on the order of 1–2 mm and horizontal displacement that varies from near-negligible to 1.2 mm. While these deflections are not relevant for some of the beamlines at the first target station at the spallation neutron source and the high flux isotope reactor, they will become critical for upcoming instrumentation at the second target station, as well as any instruments targeting sub-mm samples, as neutron sources and optics evolve to smaller and more focused beams. We discuss mitigation protocols and potential modifications to the environment to minimize the effect of misalignment due to thermal deflection.

47 OTHER INSTRUMENTATION↗

Functional enzyme–polymer complexes

Significance The use of biological enzyme catalysts could have huge ramifications for chemical industries. However, these enzymes are often inactive in nonbiological conditions, such as high temperatures, present in industrial settings. Here, we show that the enzyme PETase (polyethylene terephthalate [PET]), with potential application in plastic recycling, is stabilized at elevated temperature through complexation with random copolymers. We demonstrate this through simulations and experiments on different types of substrates. Our simulations also provide strategies for designing more enzymatically active complexes by altering polymer composition and enzyme charge distribution.

59 BASIC BIOLOGICAL SCIENCES↗

De novo design of small beta barrel proteins

Small beta barrel proteins are attractive targets for computational design because of their considerable functional diversity despite their very small size (<70 amino acids). However, there are considerable challenges to designing such structures, and there has been little success thus far. Because of the small size, the hydrophobic core stabilizing the fold is necessarily very small, and the conformational strain of barrel closure can oppose folding; also intermolecular aggregation through free beta strand edges can compete with proper monomer folding. Here, we explore the de novo design of small beta barrel topologies using both Rosetta energy–based methods and deep learning approaches to design four small beta barrel folds: Src homology 3 (SH3) and oligonucleotide/oligosaccharide-binding (OB) topologies found in nature and five and six up-and-down-stranded barrels rarely if ever seen in nature. Both approaches yielded successful designs with high thermal stability and experimentally determined structures with less than 2.4 Å rmsd from the designed models. Using deep learning for backbone generation and Rosetta for sequence design yielded higher design success rates and increased structural diversity than Rosetta alone. The ability to design a large and structurally diverse set of small beta barrel proteins greatly increases the protein shape space available for designing binders to protein targets of interest.

59 BASIC BIOLOGICAL SCIENCES↗

Constraining the oxygen requirements for modern microbial eukaryote diversity

Eukaryotes originated prior to the establishment of modern marine oxygen (O 2 ) levels. According to the body fossil and lipid biomarker records, modern (crown) microbial eukaryote lineages began diversifying in the ocean no later than ~800 Ma. While it has long been predicted that increasing atmospheric O 2 levels facilitated the early diversification of microbial eukaryotes, the O 2 levels needed to permit this diversification remain unconstrained. Using time-resolved geochemical parameter and gene sequence information from a model marine oxygen minimum zone spanning a range of dissolved O 2 levels and redox states, we show that microbial eukaryote taxonomic richness and phylogenetic diversity remain the same until O 2 declines to around 2 to 3% of present atmospheric levels, below which these diversity metrics become significantly reduced. Our observations suggest that increasing O 2 would have only directly promoted early crown-eukaryote diversity if atmospheric O 2 was below 2 to 3% of modern levels when crown-eukaryotes originated and then later met or surpassed this range as crown-eukaryotes diversified. If atmospheric O 2 was already consistently at or above 2 to 3% of modern levels by the time that crown-eukaryotes originated, then the subsequent diversification of modern microbial eukaryotes was not directly driven by atmospheric oxygenation.

59 BASIC BIOLOGICAL SCIENCES↗

Equilibrium-gated pattern formation: How molecular dissociation thermodynamics drive emergent behavior in dissipative polymeric systems

Emergent patterns in biological systems arise through dissipative processes that balance reaction and transport phenomena, producing highly functional properties from self-regulating mechanisms. Synthetic fabrication, by contrast, often relies on user-controlled, multistep methods that lack the self-organizing capabilities of natural systems. Inspired by nature, we sought chemical systems that integrate strongly coupled reaction and transport phenomena, identifying frontal ring-opening metathesis polymerization (FROMP) as a method capable of creating diverse forms and functions through reactive processing. By employing discrete molecular initiators, FROMP allows precise control of key reaction steps—inhibition, initiation, and propagation. Using an integrated computational and experimental framework, we uncover how near-equilibrium inhibition dynamics, coupled with far-from-equilibrium reaction kinetics, drive pattern formation in frontally polymerized synthetic materials. We propose the concept of equilibrium-gated pattern formation, demonstrating how initiator chemistry can be tuned to achieve programmable macroscale properties. Our study reveals a surprising insight: Emergent behavior in FROMP systems arises from the inhibition-dominated regime of resin composition, expanding prior observations that such behavior is confined to a narrow compositional space near the boundary between front quenching and uniform front propagation. We identify a broader compositional window, far from the quenching regime, where emergent behavior reliably manifests. This expanded design space significantly enhances the operational flexibility of reactive systems and their capacity for self-organization. Furthermore, these insights provide a roadmap for designing bioinspired materials with self-organizing capabilities, unlocking possibilities in synthetic manufacturing.

Architected Polymers↗

Overestimated natural biological nitrogen fixation translates to an exaggerated CO 2 fertilization effect in Earth system models

CO 2 fertilization of the terrestrial biosphere is limited by nitrogen. Biological nitrogen fixation (BNF) is the dominant natural nitrogen source to the terrestrial biosphere and can alleviate nitrogen limitation but is poorly constrained in Earth system models (ESMs). Here, in this study, we compare terrestrial BNF from an ensemble of ESMs of the 6th Coupled Model Intercomparison Project to a new global synthesis of observations across natural and agricultural biomes. We find that compared to observations, ESMs underestimate agricultural BNF but overestimate natural BNF in the present day by over 50%. Natural BNF is overestimated in the most productive ecosystems that contribute most to the terrestrial carbon sink (forests and grasslands). ESMs with different BNF representations yield a range of BNF responses to CO 2 enrichment. Some ESMs with phenomenological representations of BNF predict a natural BNF increase in response to a doubling of CO 2 that aligns with a meta-analysis of CO 2 enrichment experiments (31% increase) but fail to account for the substantial carbon cost of BNF. In contrast, ESMs with mechanistic representations of BNF account for its carbon cost as well as its regulation by nitrogen limitation but overestimate the BNF response to a doubling of CO 2 (135% increase). Overall, all current BNF representations in ESMs fall short of fully capturing its response to rising atmospheric CO 2 . Finally, we find a positive correlation between modeled present-day natural BNF and the CO 2 fertilization effect across ESMs, suggesting that overestimated natural BNF translates to an exaggerated CO 2 fertilization effect of approximately 11% in ESMs.

Biological nitrogen fixation↗

An atypical lipoteichoic acid from Clostridium perfringens elicits a broadly cross-reactive and protective immune response

Clostridium perfringens is a leading cause of food-poisoning and causes avian necrotic enteritis, posing a significant problem to both the poultry industry and human health. No effective vaccine against C. perfringens is currently available. Using an antiserum screen of mutants generated from a C. perfringens transposon-mutant library, here we identified an immunoreactive antigen that was lost in a putative glycosyltransferase mutant, suggesting that this antigen is likely a glycoconjugate. Following injection of formalin-fixed whole cells of C. perfringens HN13 (a laboratory strain) and JGS4143 (chicken isolate) intramuscularly into chickens, the HN13-derived antiserum was cross-reactive in immunoblots with all tested 32 field isolates, whereas only 5 of 32 isolates were recognized by JGS4143-derived antiserum. The immunoreactive antigens from both HN13 and JGS4143 were isolated, and structural analysis by MALDI-TOF-MS, GC-MS, and 2D NMR revealed that both were atypical lipoteichoic acids (LTAs) with poly-(β1→4)-ManNAc backbones substituted with phosphoethanolamine. However, although the ManNAc residues in JGS4143 LTA were phosphoethanolamine-modified, a few of these residues were instead modified with phosphoglycerol in the HN13 LTA. The JGS4143 LTA also had a terminal ribose and ManNAc instead of ManN in the core region, suggesting that these differences may contribute to the broadly cross-reactive response elicited by HN13. In a passive-protection chicken experiment, oral challenge with C. perfringens JGS4143 lead to 22% survival, whereas co-gavage with JGS4143 and α-HN13 antiserum resulted in 89% survival. This serum also induced bacterial killing in opsonophagocytosis assays, suggesting that HN13 LTA is an attractive target for future vaccine-development studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗