Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Membrane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of hydration on morphology of thin phosphonate block copolymer electrolyte membranes studied by electron tomography

The morphological changes of phosphonate polypeptoid electrolyte membranes, poly-N-(2-ethyl)hexylglycine-block-poly-N-phosphonomethylglycine (pNeh m -b-pNpm n ), in hydrated and dry states were characterized by cryogenic transmission electron microscopy (cryo-TEM) and cryogenic electron tomography (cryo-ET). The analysis of 3D tomograms revealed that the pNeh 9 -b-pNpm 9 thin films absorbed a large amount of water, resulting in the formation of membranes that were nearly flat and giant multicompartment vesicles dispersed in the water phase. A simple lamellar phase appeared when the films were dried. In contrast, pNeh 18 -b-pNpm 18 thin films absorbed little water and formed small highly curved unilamellar and multilamellar vesicles. Water was located mainly outside the closely-packed vesicles. When water was removed by drying, the walls of adjacent vesicles collapsed to form honeycomb-like capsules. Here, the changes in domain size reflected changes in chain conformations. The pNpm9 blocks were saturated by water and fully extended, while pNpm 18 blocks were neither saturated by water nor fully extended. In addition, the thicknesses of hydrophobic blocks in the hydrated films of both pNeh 9 -b-pNpm 9 and pNeh 18 -b-pNpm 18 were smaller than those in the dry films, reflecting an increase of the average distance between the neighboring junctions of polypeptoid molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Optical response of a dual membrane active–passive optomechanical cavity

Highlights: • The optical response is determined by competition between photon-tunneling, two-phonon process, gain effect. • The photon-tunneling adjusts supermode frequency. • The absorption coefficient can exceed 1. • Not only realize fast/slow light but conversion between fast and slow light. We investigate a dual membrane active–passive cavity where each mechanical membrane individually quadratically coupled to passive and active cavities via two-phonon process. Due to the fact that in the quadratically coupled optomechanical system mean-field approximation fails, hence to analyze the system completely, we switch to a more generalized out of equilibrium approach, namely Keldysh Green’s functional approach. We calculate transmission rate using predetermined full retarded Green’s function, and then numerically examine the effect of the various parameters on the transmission coefficient and discuss the features and physical mechanism behind them in detail. On the basis of the optical responsivity we further extend our study to fast and slow light phenomenon. The results show that our proposed system can not only realize ultra-fast/ultra-slow light under proper choice of cavity parameters but also a realization of the conversion between fast and slow light and vice versa has also been pointed out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Elucidating effects of catalyst loadings and porous transport layer morphologies on operation of proton exchange membrane water electrolyzers

Producing green hydrogen efficiently via proton exchange membrane water electrolysis (PEMWE) is the key for achieving decarbonization targets. Iridium catalyst is expensive, and it is important to minimize its use and to optimize interface between Ir and ionomer or water for higher utilization of catalyst in oxygen evolution reaction. In this work, x-ray computed tomography along with electrochemical and modeling techniques are used to characterize the interface for two different porous transport layers (PTLs) and catalyst layers at various loadings. We show that low porosity sintered PTLs exhibit higher interfacial contact with the catalyst and the membrane that results in improved kinetics. Radiography and modeling results indicate that oxygen taking multiple transport pathways through the PTL results in slug flow through the channels that reduces mass transport overpotential. Based on the results, we suggest design guidelines for high efficiency and durable PEMWE and their components.

08 HYDROGEN↗
DOE OSTI2025

Optimization based process modeling of an anaerobic membrane bioreactor system: Application to swine wastewater

To maintain current levels of consumption in the economy with the dwindling supply of non-renewable material and energy, alternative resource streams more traditionally viewed as waste streams must be considered. Fermentation of high-strength wastewaters is one such pathway that allows for the recovery of energy, nitrogen, phosphorus, and carbon compounds. Anaerobic membrane bioreactors (AnMBRs) are an emerging technology that allow for the digestion of wastewater in a much smaller footprint than traditional anaerobic digesters. Adoption of this technology into industry has been limited by membrane capital and cleaning costs, but these costs may be offset through the recovery of valuable products. To evaluate the viability of AnMBR technology in the context of swine wastewater treatment, an optimization-based process model built upon Anaerobic Digestion Model No. 1 (ADM1) has been developed. Modeling results show that a swine wastewater stream provides potential for net positive energy generation from the AnMBR system in most cases. Sensitivity analyses around important variables were conducted to determine focus areas for future research into AnMBR technology and evaluate the robustness of the model to microbial variables that may change with different microbial communities.

09 BIOMASS FUELS↗
DOE OSTI2025

Porous transport electrodes for oxygen evolution reaction in proton exchange membrane water electrolysis -cells: Materials, designs, and diagnoses

H 2 production using proton exchange membrane (PEM) water electrolysis (PEMWE) cells has received considerable attention because of the high efficiencies of these cells and no harmful emissions from the related process. In PEMWE cells, porous transport electrodes (PTEs) composed of a catalyst layer (CL) comprising O 2 evolution reaction (OER) catalysts, porous transport layer (PTL), and PEM play key roles in the stack performance and lifetime. Herein, Ir-based and non-precious-metal OER catalysts that are highly active and stable at low pH values and high anodic potentials are reviewed to understand their OER mechanisms. Various strategies are proposed for engineering CLs and PTLs to improve the interfacial properties and mass transfers of reactants and products to and from the active sites. Additionally, diagnoses of PTEs is significantly crucial for interpreting electrochemical processes and addressing their current challenges. Therefore, half-cell analyses, including diffusion electrode (DE), floating electrode (FE), and modified rotating disk electrode (MRDE) techniques, are explored, and membrane electrode assembly (MEA)-based analyses, such as the polarization technique, electrochemical impedance spectroscopy, and magnetic field analysis, are established. In conclusion, this study aims to provide an overview of recent technologies used for the engineering and diagnostic tools of PEMWE cells and insights into the advanced components and systems to be developed in this field.

Diagnosis of PEMWE Cells↗
DOE OSTI2021

Current research in low temperature proton exchange membrane-based electrolysis and a necessary shift in focus

While hydrogen has limited use in energy markets today, significant growth is possible in grid storage and as an energy carrier in other sectors. Along with lower electricity prices, further hydrogen cost reduction can enable electrochemical water splitting, particularly as the use of intermittent, renewable power sources increases and the quantity and duration of storage requirements limit electrical storage options. With the improved viability of large-scale hydrogen production, research in low temperature electrolysis has dramatically increased. The overwhelming majority of research efforts within proton exchange membrane-based systems has focused on catalyst development, although a smaller set have developed transport layers as well. As proton exchange membrane-based electrolysis shifts into higher technology readiness levels, however, there is a growing need for work optimizing materials integration, developing component-specific and device-level accelerated stress tests, and addressing manufacturing considerations. These areas directly impact electrolyzer performance, durability, and cost, and are critical to advancing hydrogen’s value and electrochemical water splitting.

08 HYDROGEN↗
DOE OSTI2021

Recent advances in integrating platinum group metal-free catalysts in proton exchange membrane fuel cells

Platinum group metal (PGM)-free catalysts are promising low-cost materials for the oxygen reduction reaction in proton exchange membrane fuel cells (PEMFCs). A variety of chemical precursors and synthesis methods have been proposed to increase their catalytic activity. In comparison, significantly less attention has been dedicated to the integration of these PGM-free catalysts into operating electrodes by investigating the role of the membrane electrode assembly (MEA) fabrication on the PEMFC performance. Here, we discuss here some remarkable performance improvements recently achieved by tuning catalyst loading, ionomer content, and ink solvent composition, and call for further explorations of the ink processing and MEA fabrication to improve performance.

25 ENERGY STORAGE↗
DOE OSTI2024

A numerical method for simulating variable density flows in membrane desalination systems

Here, we present a novel method for simulating unsteady, variable density, fluid flows in membrane desalination systems. By assuming the density varies only with concentration and temperature, the scheme decouples the solution of the governing equations into two sequential blocks. The first solves the governing equations for the temperature and concentration fields, which are used to compute all thermophysical properties. The second block solves the conservation of mass and momentum equations for the velocity and pressure. We show that this is computationally more efficient than schemes that iterate over the full coupled equations in one block. We verify that the method achieves second-order spatial-temporal accuracy, and we use the method to investigate buoyancy-driven convection in a desalination process called vacuum membrane distillation. Specifically, we show that with gravity properly oriented, variations in temperature and concentration can trigger a double-diffusive instability that enhances mixing and improves water recovery. We also show that the instability can be strengthened by providing external heating.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Optimization-based modeling and economic comparison of membrane distillation configurations for application in shale gas produced water treatment

Membrane distillation (MD) is an emerging membrane technology with great potential for treatment of hypersaline wastewater generated by unconventional (shale) oil and gas reservoirs. However, the low energy efficiency of this technology makes the operating cost of MD systems relatively high, especially in the absence of waste heat. There are several MD configurations with inherent advantages and disadvantages and varying performance. As such, there is a need for thermo-economic optimization of MD systems in a systematic manner to assess their economic performance. Here we present an optimization framework to model and compare the performance of six MD configurations (DCMD, AGMD, PGMD, CGMD, SGMD, and VMD) in continuous recirculation mode for treatment of hypersaline wastewater. The optimization results show that AGMD with small gap size operated at low stream Reynolds number outperforms all other configurations with treatment cost of 4.57 US $/m 3 of feed. However, restricting the system design to more practically relevant operating conditions, such as higher Reynolds number and larger gap size, diminishes the cost superiority of AGMD over other configurations. We also observed that treatment cost using PGMD configuration approaches those of CGMD and DCMD, particularly when modules with small gaps are used.

42 ENGINEERING↗
DOE OSTI2020

Experimental studies on the effects of sheet resistance and wettability of catalyst layer on electro-catalytic activities for oxygen evolution reaction in proton exchange membrane electrolysis cells

As the most important part of electrochemical reaction in proton exchange membrane electrolysis cells (PEMECs) for water splitting, oxygen evolution reaction (OER) occurs at the anode catalyst layer (CL). The distribution of the OER site is affected by many factors, such as properties of CL, operation parameters, procedures, etc. To study the effects of properties of CLs on the distribution of OER site on the CL, and consequently affect the performance of PEMECs, CLs with different sheet resistances are tested under different operation conditions. Furthermore, the phenomena of OER on CLs are captured by a high-speed and micro-scale visualization system in-situ and analysed coupled with electrochemical results. The results in this work show that both sheet resistance and wettability of CLs have significant impact on the distribution of the OER site, which can help optimize the design of membrane electrode assembly and improve the operating parameters for electrochemical devices.

08 HYDROGEN↗
DOE OSTI2020

Effect of reacting gas flowrates and hydration on the carbonation of anion exchange membrane fuel cells in the presence of CO 2

Anion exchange membrane fuel cells (AEMFCs) have been widely touted as a low-cost alternative to existing proton exchange membrane fuel cells. However, one of the limitations of this technology has been the severe performance penalty related to the introduction of CO 2 to the cell – typically in the air cathode feed. Introduction of CO 2 into AEMFCs results in cell carbonation, which imparts thermodynamic, kinetic and Ohmic overpotentials that can add up to hundreds of millivolts. Therefore, it is important to find strategies and operational protocols for AEMFCs that minimize these overpotentials. In this paper, we reserach the impacts of the anode and cathode flowrate, as well as the cell hydration level, on the extent of cell carbonation and cell polarization. Key findings include: (1) decreasing the cathode flowrate generally decreases the total CO 2 -related voltage loss while changing the anode flowrate has a minimal effect; (2) increasing cell hydration helps to mitigate the performance loss in the presence of CO 2 ; and (3) operational combinations are found that significantly reduce the CO 2 penalty compared to the present literature.

25 ENERGY STORAGE↗
DOE OSTI2021

Holistic design principles for flow batteries: Cation dependent membrane resistance and active species solubility

Cation dependent resistance of a commercial cation exchange membrane, Nafion™ 212, as well as the solubility of select active materials are investigated, demonstrating practical consequences of cation choice on redox flow battery (RFB) performance. The conductivity of alkali and methyl- or -alcohol substituted ammonium cations through pretreated Nafion™ 212 reveal that cation size is the dominant factor affecting ionic transport. Among the alkali series the resistance increases with larger ionic radii and similarly, with increasing steric bulk through substitution on ammonia. The solubility of ferrocyanide, a commonly used redox flow battery posolyte (or catholyte), as well as iron, cobalt, and chromium metal-organic compounds are determined for the same series of cations. Full cells are assembled using various cation mixtures and membrane pre-treatments to demonstrate practical effects of each variable. Here, we highlight the need to carefully select the correct cations for efficient electrolyte design, since certain cations may lead to high conductivity but low solubility, or vice versa, and provide design principles for RFBs using Nafion™ 212.

25 ENERGY STORAGE↗
DOE OSTI2022

Understanding the E balance for water management in hydroxide exchange membrane fuel cells

As a key challenge for hydroxide exchange membrane fuel cells (HEMFCs), understanding water management deeply is critical for performance and durability improvement. Here, in this work, we show that the balance between water generation and phase-change-induced (PCI) flow is the main factor controlling cell voltage over a wide range of conditions where the cells are vulnerable to severe flooding. The regulation of flooding by heat generation can be reflected by a stable voltage with increase of current density in the polarization curve. This PCI balance voltage (E balance ), which determines the shape of polarization curve, is modeled as a function of cell operating conditions and gas diffusion layer (GDL) properties. Temperature, pressure, and thermal conductivity of GDL were found important for tuning the level of E balance , both in HEMFCs and proton exchange membrane fuel cells. The understanding of E balance will help to generate strategies for resolving flooding in HEMFCs, and it offers a new perspective for polarization curve interpretation.

25 ENERGY STORAGE↗
DOE OSTI2024

Identifying electrochemical processes by distribution of relaxation times in proton exchange membrane electrolyzers

Distribution of relaxation time (DRT) is used to interpret electrochemical impedance spectroscopy (EIS) for proton exchange membrane (PEM) water electrolyzers, with an attempt to separate overlapped relaxation processes in Nyquist plots. By varying operating conditions and catalyst loadings, four main relaxation peaks arising from EIS can be identified and successfully separated from low to high frequencies as (P1) mass transport, (P2) oxygen evolution reaction kinetics, (P3) reaction kinetics (with faster time constant than P2), and (P4) ionic transport. Here, the shape, height, and frequency of the DRT peaks change with different membrane electrode assembly (MEA) configurations. Electron microscopy reveals distinct features from the cross-sectioned MEAs which verify critical DRT results in that increasing the iridium (Ir)-anode loading from 0.2 mgIr/cm 2 to 1.5 mgIr/cm 2 reduces kinetic losses due to higher site-access; a thick and compacted anode, however, also triggers higher ohmic resistances from membrane/catalyst layer hydration and increases transport losses due to longer ionomer pathways. DRT provides higher resolution to EIS for deconvoluting processes with different relaxation times and the quantification of DRT peaks improves the accounting of total losses from each process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Carbon nanotube-based mixed-matrix membranes with supramolecularly engineered interface for enhanced gas separation performance

Here in this study, novel nanocomposite membranes were fabricated from single-walled carbon nanotubes (SWNTs) and a triptycene-containing polyimide. The desirable interfacial morphology and homogenous dispersion of SWNTs were achieved by strong π-π stacking and supramolecular shape-fitting interactions between the nanotube and the paddlewheel-shaped triptycene moieties in polymer matrix. Mixed-matrix membranes (MMMs) containing 2–15 wt% of as-purchased SWNTs (AP-SWNTs) were prepared and tested for their gas transport properties. While all MMMs showed greatly enhanced permeabilities with well-maintained selectivities, a non-linear dependence of permeability on filler content was observed. Another series of MMMs with purified SWNTs (P-SWNTs) and acid-treated SWNT (A-SWNTs) were also prepared. The functionalized A-SWNT MMM exhibited the best separation performance at 2 wt% filler content among all MMMs, which can be attributed to the improved interfacial affinity with carboxylic acid functionalized surface of A-SWNTs.

42 ENGINEERING↗
DOE OSTI2020

Highly permeable polyethersulfone substrates with bicontinuous structure for composite membranes in CO 2 /N 2 separation

Substrate morphology has a significant effect on the CO 2 transport performance of a thin-film composite (TFC) membrane. In this study, a new mixed solvent comprising 2-pyrrolidone (2-PD) and 2-methoxyethanol (2-ME) was used to prepare polyethersulfone (PES) substrates with bicontinuous structure by water vapor-induced phase separation, followed by immersion in water as nonsolvent. Here, compared with the commonly used solvent, N-methyl-2-pyrrolidone (NMP), the 2-PD/2-ME mixed solvent is more hydrophilic and can decrease the thermodynamic stability of the casting solution significantly. As a result, the phase separation was induced via the spinodal decomposition mechanism. The open morphology bestowed the optimized substrate with a very high CO 2 permeance of 133,226 ± 3,870 GPU (1 GPU = 10 –6 cm 3 (STP) s –1 cm –2 cmHg –1 = 3.3464 × 10 -9 kg-mol s –1 m –2 Pa –1 ), which was 5 times more permeable than the baseline substrate synthesized with NMP. By using this new substrate, the prepared TFC membrane containing amines showed an increased CO 2 permeance of 908 ± 8 GPU at 57°C, which was 48 GPU higher than that with the baseline substrate. Meanwhile, the CO 2 /N 2 selectivity was retained at 162 ± 4 at 57°C. In addition, the good scalability of the new PES substrate was demonstrated by roll-to-roll fabrication of a 50' long scale-up PES substrate with a width of 21".

2-Pyrrolidone↗
DOE OSTI2020

Surface effects on deuterium permeation through vanadium membranes

Dense vanadium-based membranes offer high permeability and perfect selectivity to hydrogen isotopes, maintain favorable neutronic properties, and are compatible with liquid metals such as PbLi. These properties make vanadium membranes a promising fusion fuel cycle technology for processes such as tritium extraction from PbLi and exhaust processing. Surface contamination has a deleterious effect on the gas-phase hydrogen permeation through vanadium, and the reported permeabilities range from 10 -14 to 10 -7 mol m -1 s -1 Pa -0.5 . Thin dense films of palladium applied to clean vanadium surfaces enable a consistently high hydrogen permeability. In this study, uncoated vanadium resulted in deuterium permeabilities ranging from 2.8 × 10 -11 to 6.4 × 10 -9 mol m -1 s -1 Pa -0.5 at 300 °C–700 °C, respectively. Post-test analysis revealed a VO x surface layer and VC x subsurface layer formed on the feed side, while the as-received surface oxide dissolved leaving a submonolayer oxide on the permeate surface. Furthermore, the Pd-coated V resulted in a maximum deuterium permeability of 2.1 × 10 -7 m -1 s -1 Pa -0.5 at 375 °C upon activation of the Pd surface by oxidation and reduction. The deuterium permeation declined upon heating to 500 °C due to intermetallic diffusion between the Pd and V. The Mo 2 C-coated V resulted in deuterium permeabilities ranging from 2.7 × 10 -10 to 1.8 × 10-9 at 500 °C–700 °C, respectively, and a post-test analysis found the carbon in the Mo 2 C layer had dissolved into the V near the interface.

13 HYDRO ENERGY↗
DOE OSTI2020

Electro-osmo-dialysis through nanoporous layers physically conjugated to micro-perforated ion-exchange membranes: Highly selective accumulation of trace coions

This study explores theoretically and numerically the phenomenon of counter-flow accumulation of trace coions during electro-osmo-dialysis through composite membranes containing nanoporous and perforated ion-exchange layers. The combination of charged nanopores and perforations allows electroosmosis, and ion concentration polarization appears near the ion-exchange layer. Accumulation of trace coions occurs because their advective and electromigration flow velocity components have opposite signs and are locally compensating in depletion regions where electric fields are high. This local compensation of flow components can give rise to high accumulation factors (>1000 in some cases) for trace coions at some distance from the interface between the nanoporous and ion-exchange layers. Moreover, the extent of this accumulation depends on the trace-coion diffusion coefficient. The resulting selectivity between different coions might serve as a basis for environmentally friendly separation of ionic species such as synthetic peptides or rare-earth elements. For example, a periodic process might include accumulation followed by species release into smaller volumes of solution. For both rare-earth ions and peptide-like species, the accumulation selectivity between ions with small differences in mobilities depends on system parameters such as nanoporous-layer thickness, distance between the perforations, and the zeta potential of the nanopore surface. Here, the use of optimal values of these membrane parameters may enable tuning of the electro-osmo-dialysis system for separation of specific ions. Modelling reveals that despite inhomogeneous patterns of fluid and ion flows close to the nanoporous/perforated ion-exchange interface, at relatively short distances from this interface (less than half the distance between the perforations) all the flows become practically one-dimensional (1D). Similarly, the concentration profiles of trace coions also become 1D. The flow one-dimensionality at short distances from the current-polarized interface enables a simple 1D approximation that is useful for an approximate analysis of trends in this multi-parameter system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗