Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Structural and magnetic properties of ion beam sputtered Co{sub 2}FeAl full Heusler alloy thin films

Co{sub 2}FeAl full Heusler alloy thin films grown at different temperatures on Si(100) substrates using ion beam sputtering system have been investigated. X-ray diffraction (XRD) patterns revealed the A2 disordered phase in these films. The deduced lattice parameter slightly increases with increase in the growth temperature. The saturation magnetization it is found to increase with increase in growth temperature. The magnetic anisotropy has been studied using angle dependent magneto-optical Kerr effect. In the room temperature deposited film, the combination of cubic and uniaxial anisotropy have been observed with weak in-plane uniaxial anisotropy which increases with growth temperature. The uniaxial anisotropy is attributed to the anisotropic interfacial bonding in these Co{sub 2}FeAl /Si(100) heterostructures.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of AgFeP{sub 2}O{sub 7}

AgFeP{sub 2}O{sub 7} has been synthesized by flux crystallization and characterized by single crystal and powder X-ray diffraction (sp. gr. P2{sub 1}/c, a=7.3298(2), b=7.9702(2), c=9.5653(2) A, {beta}=111.842(1){sup o}, V=518.68(2) A{sup 3}) and FTIR-spectroscopy. The structure is composed of isolated iron octahedra and phosphate tetrahedra interconnected into 3D network with hexagonal channels, where silver counter-ions are located. The magnetic behavior of the compound approaches the Curie-Weiss equation with a Weiss constant {theta}=-165.9 K indicating strong antiferromagnetic interaction between iron(III) ions. - Graphical abstract: AgFeP{sub 2}O{sub 7} synthesized by flux crystallization is composed of isolated iron octahedra and phosphate tetrahedra interconnected into 3D network with hexagonal channels, where silver counter-ions are located. The compound approaches the Curie-Weiss equation with a Weiss constant {theta}=-165.9 K exhibiting antiferromagnetic interactions due to magnetically isolated high-spin iron(III).

36 MATERIALS SCIENCE↗

New ternary rare-earth metal boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) containing BC{sub 2} units: Crystal and electronic structures, magnetic properties

The ternary rare-earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) were prepared from the elements by arc-melting followed by annealing in silica tubes at 1270 K for 1 month. The crystal structures of Tb{sub 15}B{sub 4}C{sub 14} and Er{sub 15}B{sub 4}C{sub 14} were determined from single crystal X-ray diffraction data. They crystallize in a new structure type in space group P4/mnc (Tb{sub 15}B{sub 4}C{sub 14}: a=8.1251(5) A, c=15.861(1) A, Z=2, R{sub 1}=0.041 (wR{sub 2}=0.088) for 1023 reflections with I{sub o}>2{sigma}(I{sub o}); Er{sub 15}B{sub 4}C{sub 14}: a=7.932(1) A, c=15.685(2) A, Z=2, R{sub 1}=0.037 (wR{sub 2}=0.094) for 1022 reflections with I{sub o}>2{sigma}(I{sub o})). The crystal structure contains discrete carbon atoms and bent CBC units in octahedra and distorted bicapped square antiprisms, respectively. In both structures the same type of disorder exists. One R atom position needs to be refined as split atom position with a ratio 9:1 indicative of a 10% substitution of the neighboring C{sup 4-} by C{sub 2}{sup 4-}. The actual composition has then to be described as R{sub 15}B{sub 4}C{sub 14.2}. The isoelectronic substitution does not change the electron partition of R{sub 15}B{sub 4}C{sub 14} which can be written as (R{sup 3+}){sub 15}(C{sup 4-}){sub 6}(CBC{sup 5-}){sub 4{center_dot}}e{sup -}. The electronic structure was studied with the extended Hueckel method. The investigated compounds Tb{sub 15}B{sub 4}C{sub 14}, Dy{sub 15}B{sub 4}C{sub 14} and Er{sub 15}B{sub 4}C{sub 14} are hard ferromagnets with Curie temperatures T{sub C}=145, 120 and 50 K, respectively. The coercive field B{sub C}=3.15 T for Dy{sub 15}B{sub 4}C{sub 14} is quite remarkable. - Graphical abstract: The ternary rare earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Y, Gd-Lu) were prepared from the elements by arc-melting followed by annealing in silica tubes at 1270 K for 1 month. Tb{sub 15}B{sub 4}C{sub 14} is a new member of the rare-earth metal boride carbide series in which the finite quasi-molecular CBC entities as well as isolated C atoms are embedded in the voids of the metal atom matrix. The structure of Tb{sub 15}B{sub 4}C{sub 14} contains two types of slabs: one slab contains finite bent CBC units and isolated carbon atoms whereas another is formed only from octahedral coordinated single carbon atoms. The electronic structure for the idealized composition corresponds to an electron partitioning according to (Tb{sup 3+}){sub 15}(C{sup 4-}){sub 6}(CBC{sup 5-}){sub 4{center_dot}}e{sup -} giving rise to a single electron per formula for Tb-Tb framework bonding. The magnetism of the ternary rare earth boride carbides R{sub 15}B{sub 4}C{sub 14} (R=Tb, Dy, Er) is characterized by the onset of ferromagnetic order below T<150 K.

36 MATERIALS SCIENCE↗

Magnetic properties of a staggered S = 1 chain with an alternating single-ion anisotropy direction

Materials composed of spin-1 antiferromagnetic (AFM) chains are known to adopt complex ground states that are sensitive to the single-ion-anisotropy (SIA) energy ( D ), and intrachain ( J 0 ) and interchain ( J 1 , 2 ′ ) exchange energy scales. While theoretical and experimental studies have extended this model to include various other energy scales, the effect of the lack of a common SIA axis is not well explored. Here we investigate the magnetic properties of Ni ( pyrimidine ) ( H 2 O ) 2 ( NO 3 ) 2 , a chain compound where the tilting of Ni octahedra leads to a twofold alternation of the easy-axis directions along the chain. Muon-spin relaxation measurements indicate a transition to long-range order at T N = 2.3 K and the magnetic structure is initially determined to be antiferromagnetic and collinear using elastic neutron diffraction experiments. Inelastic neutron scattering measurements were used to find J 0 = 5.107 ( 7 ) K , D = 2.79 ( 1 ) K , J 1 ′ = 0.00 ( 5 ) K , J 2 ′ = 0.18 ( 3 ) K , and a rhombic anisotropy energy E = 0.19 ( 9 ) K . Mean-field modeling reveals that the ground state structure hosts spin canting of ϕ ≈ 6 . 5 ∘ , which is not detectable above the noise floor of the elastic neutron diffraction data. Monte Carlo simulation of the powder-averaged magnetization, M ( H ) , is then used to confirm these Hamiltonian parameters, while single-crystal M ( H ) simulations provide insight into features observed in the data. Published by the American Physical Society 2025

Vaidya, S. (ORCID:000000033975497X)↗

Magnetic properties and adsorptive performance of manganese–zinc ferrites/activated carbon nanocomposites

Owing to the unique microstructure and high specific surface area, activated carbon (AC) could act as an excellent adsorbent for wastewater treatment and good carrier for functional materials. In this paper, manganese–zinc ferrites (Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}: MZF) were anchored into AC by hydrothermal method, resulting in the excellent magnetic response for AC nanocomposites in wastewater treatment. All results demonstrated the magnetic nanoparticles presented a spinel phase structure and existed in the pores of AC. The saturation magnetization (Ms) of MZF/AC nanocomposites increased with the ferrites content, while the pore volume and specific surface area declined. The Sample-5 possessed the specific surface area of 1129 m{sup 2} g{sup −1} (close to 1243 m{sup 2} g{sup −1} of AC) and Ms of 3.96 emu g{sup −1}. Furthermore, the adsorptive performance for organic dyes was studied and 99% methylene blue was adsorbed in 30 min. The magnetic AC nanocomposites could be separated easily from solution by magnetic separation technique. - Graphical abstract: The Sample-5 presented both good magnetic response and high BET surface area up to 1129 m{sup 2} g{sup −1} (close to AC of 1243 m{sup 2} g{sup −1}), which could be separated completely for about 60 s. MZF/AC nanocomposites (Sample-3, 4, 5) in our work could be used as the magnetic absorbents, which could be separated easily by an outer magnet after the MB adsorption. - Highlights: • Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (MZF) as few as possible was implanted into activated carbon (AC) for the higher surface area. • Sample-5 possessed the high specific surface area (1129 m{sup 2} g{sup −1}) and the suitable Ms (3.96 emu g{sup −1}). • Methylene blue was adsorbed almost completely by MZF/AC nanocomposites in 30 min. • MZF/AC nanocomposites were separated easily from solution by magnetic separation technique.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extreme sensitivity of magnetic properties on the synthesis routes in La{sub 0.7}Sr{sub 0.3}MnO{sub 3}

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} polycrystalline samples have been prepared using different synthesis routes. X-ray Diffraction (XRD) confirms that the samples are of single phase with R-3c space group. The surface morphology and particle size has been observed using Field Emission Scanning Electron Microscopy (FESEM). Magnetic measurement shows that the magnetization in the materials are affected by low crystallite size which destroys the spin ordering due to strain at grain boundaries and this also leads to reduction in magnetization as well as high coercivity in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties of CoFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} nanoparticles synthesized by novel chemical route

CoFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} nanoparticles were synthesized by modified and cost effective sol-gel autocombustion method. X-ray diffraction study confirms the spinel phase formation of face centered cubic lattice with space group Fd3m and without any impurity. Magnetic measurements demonstrate that the CoFe{sub 2}O{sub 4} shows saturation magnetization of 2.73 µ{sub B}/f.u. where as ZnFe{sub 2}O{sub 4} shows paramagnetic behavior. Magnetic behavior of CoFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} is confirmed from Mössbauer studies. Effect of sintering on structural, magnetic and cation occupancy of substituted cobalt ferrite is discussed in this paper.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth and magnetic properties of Fe{sub 3}O{sub 4} films on TiN buffered Si(001), Si(110), and Si(111) substrates

Epitaxial Fe{sub 3}O{sub 4} thin films were grown on TiN buffered Si(001), Si(110), and Si(111) substrates by dc reactive sputtering deposition. Both Fe{sub 3}O{sub 4} films and TiN buffer are fully epitaxial when grown at substrate temperatures above 150 deg. C, with textured single phase Fe{sub 3}O{sub 4} resulting from room temperature growth. The initial sputtered Fe{sub 3}O{sub 4} formed nuclei islands and then coalesced to epitaxial columnar grains with increasing film thickness. The magnetization decreases and the coercive field increases with decreasing film thickness. There is no in-plane magnetic anisotropy of epitaxial Fe{sub 3}O{sub 4}(001) on Si(001) but Fe{sub 3}O{sub 4} films grown on Si(110) and Si(111) substrates show uniaxial in-plane magnetic anisotropy.

36 MATERIALS SCIENCE↗

Dielectric and magnetic properties of microwave-absorbing FeAl x O y catalysts fabricated via solution combustion synthesis

Iron-based alumina (FeAl x O y ) nanocomposites are microwave-absorbers and catalysts, which makes them promising for emerging microwave-assisted thermocatalytic technologies. Solution combustion synthesis (SCS) has been used to synthesize FeAl x O y powders, and prior work has demonstrated that adjusting SCS parameters significantly changes phase composition and specific surface area of the products. However, it is unclear how synthesis parameters affect their microwave-absorbing properties, which are essential for optimizing microwave-assisted technologies. To address this challenge, in the present work, twelve different FeAl x O y products were synthesized at different combinations of the SCS parameters such as two fuels (citric acid and glycine), two heating modes (hotplate and muffle furnace), and three Fe:Al molar ratios (2:1, 1:1, 1:2). Dielectric and magnetic properties of the products were characterized using a network analyzer and a vibrating sample magnetometer. Based on the measured permittivity and permeability, penetration depth and reflection loss were calculated as a function of frequency and bed thickness. The products were heated by microwaves at 2.45 GHz and then examined with X-ray diffraction (XRD) analysis. For all products, the magnetic saturation was lower than for bulk iron oxides because of the small crystallite size and aluminum substitution. The use of glycine induced high dielectric losses and enabled fast microwave-heating rates compared to citric acid. Higher Fe:Al ratio also led to higher dielectric and magnetic losses. With glycine fuel, SCS in a furnace induced larger penetration depth and lower microwave absorption than SCS on a hotplate. The minimization of reflected power was more sensitive to the thickness of the product bed than to the frequency of the electromagnetic field. Post-heating XRD analysis revealed different phase transformations in the FeAl x O y powders depending on the SCS parameters. As a result, an FeAl x O y material, synthesized via incipient wetness impregnation, lacked magnetic losses and did not heat well as compared to the SCS products.

Combustion synthesis↗

Structure and magnetic properties of the cubic oxide fluoride BaFeO{sub 2}F

Fluorination of the parent oxide, BaFeO{sub 3-{delta}}, with polyvinylidine fluoride gives rise to a cubic compound with a=4.0603(4) A at 298 K. {sup 57}Fe Moessbauer spectra confirmed that all the iron is present as Fe{sup 3+}. Neutron diffraction data showed complete occupancy of the anion sites, indicating a composition BaFeO{sub 2}F, with a large displacement of the iron off-site. The magnetic ordering temperature was determined as T{sub N}=645{+-}5 K. Neutron diffraction data at 4.2 K established G-type antiferromagnetism with a magnetic moment per Fe{sup 3+} ion of 3.95 {mu}{sub B}. However, magnetisation measurements indicated the presence of a weak ferromagnetic moment that is assigned to the canting of the antiferromagnetic structure. {sup 57}Fe Moessbauer spectra in the temperature range 10-300 K were fitted with a model of fluoride ion distribution that retains charge neutrality of the perovskite unit cell. - Graphical abstract: The cubic oxide fluoride of composition BaFeO{sub 2}F has been synthesised and characterised. Highlights: > Fluorination of BaFeO{sub 3-{delta}} with polyvinylidene fluoride gives a cubic oxide fluoride of composition BaFeO{sub 2}F. > BaFeO{sub 2}F adopts a canted antiferromagnetic structure and is different from the related phase of composition SrFeO{sub 2}F. > A model of fluoride ion distribution about iron in BaFeO{sub 2}F has been explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Al Substitution in Structural and Magnetic Properties of MnCr{sub 2}O{sub 4}

Single-phase samples of Mn(Cr{sub 1−x}Al{sub x}){sub 2}O{sub 4} (x = 0 – 0.30) with cubic spinel structure were prepared and the lattice constant is found to decrease from a = 8.4396 Å for x = 0 to a = 8.3801 Å for x = 0.30. The substitution of Al at Cr site is confirmed from the blue shift of Raman modes. Magnetization measurements and analysis show all the prepared samples exhibit ferrimagnetic transition with transition temperature in the range of 46 K for x = 0 to 33 K for x = 0.30. The saturation magnetization (M{sub s}) and the estimated anisotropy constant (K) show an anomalous behavior up to x = 0.10 and beyond that they decrease monotonously. They are explained by considering different site preferences of Al {sup 3+} ions as the doping concentration is increased. The theoretical and experimental effective magnetic moment of the samples is found to be comparable and it decreases with increase in Al concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dense and half-dense NiZnCo ferrite ceramics: Their respective relevance for antenna downsizing, according to their dielectric and magnetic properties at microwave frequencies

Spinel ferrite Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 1.98}O{sub 4−x} nanoparticles were synthesized by co-precipitation method, and samples were realized by moulding and annealing at key temperatures (T{sub M} = 800 °C, 900 °C, 1050 °C, determined beforehand through shrinkage measurements) going with calcining and sintering processes. Annealing at 800 °C and 900 °C led to half-dense ceramics (porosity ∼50 vol. %), whereas bulky ferrite was obtained after annealing at 1050 °C. Elemental analysis, X-ray diffraction and ion chromatography analysis were performed. Complex dielectric permittivity (ε*) and magnetic permeability (μ*) were investigated up to 6 GHz. With increasing T{sub M}, a decreasing amount of Fe{sup 2+} was observed, going with increasing sample density. Coupled effects of the Fe{sup 2+} concentration and of the porosity, both on dielectric and magnetic properties, were chiefly investigated and discussed. The materials show almost constant permittivities (ε′ = 5.0, 6.0, and 14.8 for T{sub M} = 800 °C, 900 °C and 1050 °C, respectively). The bulk value at f = 1 GHz (ε′ = 14.8) can be interpreted well according to Shannon's theory. The permittivities of the half-dense ceramics are discussed on the basis of Bruggeman's Effective Medium Theory. The materials annealed at 800 °C and 900 °C show almost constant magnetic permeabilities in the frequency range from 0.2 to 1 GHz (μ′ = 3.4 and 6.0 for T{sub M} = 800 °C and 900 °C). The observed permeability behavior is typical of monodomain particles, except for the sample annealed at 1050 °C, for which domain wall contribution to μ* is suspected because of non-negligible losses at low frequency (μ″ = 1.3–1.8 at f < 0.3 GHz). This finding is supported by estimations of the upper and lower values for the critical grain size, on the basis of Brown–Van der Zaag's theory. Facing bulk ceramics, and in view of using Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 1.98}O{sub 4−x} ferrite as substrate for antenna miniaturization, the electromagnetic properties of half-dense ceramics materials seem to be very competitive at frequencies beyond 0.2 GHz, and up to 0.7–0.8 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and magnetic properties of Zn{sub 0.9}Cu{sub 0.1}O{sub y} rf-sputtered thin films

Zn{sub 0.9}Cu{sub 0.01}O thin films were deposited on quartz substrates by rf-magnetron sputtering using ceramic target in pure argon gas environment. The X-ray diffraction show the polycrystalline wurtzite structure of the films. The average grain size increases from 40-100nm as thickness of the film increases. The room temperature magnetization studies show the films to be ferromagnetic. The saturation magnetization decreases with increase in film thickness.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic properties of NiS{sub 1+x} nanocrystals from [bis(salicylidene)nickel(II)] as new precursor

[Bis(salicylidene)nickel(II)] was used as a precursor to prepare nickel sulfides nanoparticles of average size 20 nm by a chemical process in oleylamine. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis) and photoluminescence (PL) spectroscopy. Magnetization measurement indicates that both of the {alpha}-NiS and Ni{sub 3}S{sub 4} nanoparticles show pramagnetism due to the size effect.

36 MATERIALS SCIENCE↗

Effect of Synthesis Temperature on Structural, Optical, and Magnetic Properties of ZnO Nanoparticles Synthesized by Combustion Method

ZnO nanoparticles at different temperatures were synthesized by using the combustion method. The effect of synthesis temperature on the properties of the nanoparticles was studied by using XRD, FESEM, EDS, TEM, photoluminescence (PL), Raman, diffuse reflectance spectra (DRS), and VSM characterization techniques. The XRD results reveal that the grown nanoparticles have a hexagonal wurtzite structure without any impurities and agreed with EDS results. FESEM and TEM micrographs show that the ZnO nanoparticles possess a spherical shape with agglomeration free, and the size increases with increase of synthesis temperature. From DRS studies, it was noticed that the band gap decreases with increase of synthesis temperature. In PL studies, blue peak at 465 nm may be due to defect-related transitions. A sharp intense peak in Raman spectra at 485 cm{sup −1} represents E{sub 2}H mode is a characteristic of a hexagonal wurtzite structure. The magnetic studies show that the magnetization decreases from 0.0172 to 0.0042 emu/g as the synthesis temperature increases from 400 to 550 °C. ZnO synthesized at 500 °C has a large squareness ratio. These materials are potential candidates for memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Annealing effect on the structural and magnetic properties of the CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} nano-ferrites

Graphical abstract: Mössbauer spectra of the as-prepared (AP) and annealed CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} samples. - Highlights: • As-prepared Cu–Al–Cr nano-ferrite samples were annealed at different temperatures T{sub A}. • Sample structure was transformed from cubic to tetragonal by JTE at 1000 °C. • Spontaneous and saturation magnetizations showed similar behavior against T{sub A}. • The deduced parameters showed dependence on T{sub A} and proved their affect by JTE. • Spontaneous magnetization proved dependence on crystallite size. - Abstract: Amounts of the as-synthesized CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} nanoparticles by the chemical co-precipitation method were annealed for 4 h at one of the temperatures T{sub A} = 300, 500, 600, 800 and 1000 °C for each. The techniques used for characterizing the samples were X-ray diffractions, infrared (IR) and Mössbauer spectroscopy and vibrating sample magnetometer. This study proved single-phase cubic structure of the samples annealed at T{sub A} ≤ 800 °C and tetragonal structure of the sample annealed at 1000 °C. The cubic-to-tetragonal structure transformation was attributed to the tetragonal distortion by Jahn–Teller effect (JTE) of Cu{sup 2+} ions. This study revealed that all deduced parameters were affected by JTE, whereas the crystallite size, lattice parameters, strain, threshold frequency, force constants, Debye temperature and stiffness constant were dependent on T{sub A}. IR absorption band positions and intensities were dependent on T{sub A} and proved the existence of Fe{sup 2+}, Fe{sup 4+} and Cr{sup 4+} ions in the crystal sublattices. The spontaneous and saturation magnetization and hyperfine magnetic field of the tetrahedral and octahedral sites were deduced and discussed as functions of T{sub A}.

36 MATERIALS SCIENCE↗

Elusive Double Perovskite Iodides: Structural, Optical, and Magnetic Properties

Halide double perovskites [A 2 M I M III X 6 ] are an important class of materials that have garnered substantial interest as non-toxic alternatives to conventional lead iodide perovskites for optoelectronic applications. While numerous studies have examined chloride and bromide double perovskites, reports of iodide double perovskites are rare, and their definitive structural characterization has not been reported. Predictive models have aided us here in the synthesis and characterization of five iodide double perovskites of general formula Cs 2 NaLnI 6 (Ln=Ce, Nd, Gd, Tb, Dy). Finally, the complete crystal structures, structural phase transitions, optical, photoluminescent, and magnetic properties of these compounds are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Analysis and Magnetic Properties of Lithium-Doped Ni-Zn Ferrite Nanoparticle

Lithium-doped nickel-zinc ferrite compound with formula Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} (x = 0, 0.01, 0.03, 0.05) was prepared using the sol-gel technique. The results of XRD proved a cubic spinel system of crystal. The lattice parameters, average particle sizes, and crystal density were calculated. It was found that the distance between magnetic ions decreases with lithium concentration and crystal density values ranging from 5.3 to 5.2 g/cm{sup 3}. SEM and AFM show the lithium substitution effect on the morphology of the samples. The saturation magnetization (M{sub s}) and coercivity (H{sub c}) of Ni{sub 0.8}Zn{sub 0.2−2x}Li{sub x}Fe{sub 2+x}O{sub 4} increase with an increasing content of Li{sup 1+} ion, where x is equal to 0, 0.01, 0.03, and 0.05. The M{sub s} and H{sub c} increase from 52 to 65 emu/g and from 99 to 119 Oe, respectively. The squareness ratio (M{sub r}/M{sub s}) appeared at a maximum value of x = 0.01.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗