Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC FIELD CONFIGURATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Magnetic tunnel junction sensor with Co/Pt perpendicular anisotropy ferromagnetic layer

Linear magnetoresistance (MR) is an important attribute for magnetic sensor designs for space applications, three dimensional detection of the magnetic field, and high field measurements. Here we demonstrate that a large linear MR of up to 22% can be achieved in a magnetic tunnel junction that consists of two ferromagnetic layers, one with out of plane and one with in plane magnetic anisotropy. The tunnelling magnetoresistance (TMR) is measured with the electrical current perpendicular to the film plane. The magnetic configuration of the device is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Princeton Field-Reversed Configuration for Compact Nuclear Fusion Power Plants

The Princeton Field-Reversed Configuration (PFRC) nuclear fusion reactor concept is an innovative approach to fusion power generation prioritizing low neutron production and small size. Here, a combination of analytical modeling and numerical simulation shows that the novel heating approach generates an FRC with closed field lines. Simulation data from a single-particle Hamiltonian code predicts ms-scale plasma heating in reactor-scale conditions while PIC codes predict formation of warm FRC plasmas from initial mirror fields. The PFRC-1 and PFRC-2 experiments have heated electrons to energies well in excess of 100 eV and plasma durations to 300 ms, more than 10 4 times longer than the predicted tilt instability growth time. From these data, we have created a development plan and anticipated performance metrics for a fusion reactor based on the PFRC concept. The resulting 1–10 MW PFRC reactors would be suitable for diverse applications, from submarines to urban environments to space propulsion. PFRC is a steady-state, driven magnetic confinement device. Plasma, inside a cylindrical array of coils, is confined and heated by external RF antennae. PFRC would be ultra-low radiation due to both its fuel and small size. The choice of advanced fuels, deuterium and helium-3 (D– 3 He), may be enabled by the high-β FRC configuration. The small size of the reactor would enable rapid exhaust of the dangerous tritium ash. Low radiation would make the reactor safer to operate and, in combination with simple geometry and small size, dramatically lowers development and maintenance costs. This review paper gives an introduction to the physics of the PFRC and a summary of the PFRC-2 experiment results to date. It then discusses the future program plan and how PFRC reactors would be commercialized.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spectrometer Optics Calibration for Jefferson Lab $ g_2^ p $ Experiment

The proton spin-dependent structure function gp2 in the resonance region has been measured in a recent experiment at Jefferson Lab's Hall A. The goal of this experiment is to determine the gp2 structure function in the Q2 region of 0.02-0.20 GeV2 by using a transversely polarized NH3 target. The Hall A High Resolution Spectrometers (HRS) were used to provide an inclusive measurement of scattered electrons at 5.69 deg. A pair of septum magnets were used to bend the 5.69 deg scatted electrons into the 12.5 deg spectrometers. A full optics calibration of the spectrometer is required to extract the kinematic quantities at the interaction vertex. However, the calibration procedure is challenging due to the complications from the strong transverse target field (2.5 T and 5.0 T) and the varied field configurations of the septum magnets. The details of the optics calibration and the progress will be described in this talk.

Gu, Chao↗

Kelvin-Helmholtz instability for flow in porous media under the influence of oblique magnetic fields: A viscous potential flow analysis

In this paper, the Kelvin-Helmholtz instability of viscous incompressible magnetic fluid fully saturated porous media is achieved through the viscous potential theory. The flow is considered to be through semi-permeable boundaries above and below the fluids through which the fluid may either be blown in or sucked out, in a direction normal to the main streaming direction of the fluid flow. An oblique magnetic field, mass, heat transfer, and surface tension are present across the interface. Through the linear stability analysis, a general dispersion relation is derived and the natural curves are plotted. Therefore, the linear stability condition is discussed in some depth. In view of the multiple time scale technique, the Ginzburg–Landau equation, which describes the behavior of the system in the nonlinear approach, is obtained. The effects of the orientation of the magnetic fields on the stability configuration in linear, as well as nonlinear approaches, are discussed. It is found that the Darcy's coefficient for the porous layers plays a stabilizing role. The injection of the fluids at both boundaries has a stabilizing effect, in contrast with the suction at both boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DYNAMICAL BAR-MODE INSTABILITY IN DIFFERENTIALLY ROTATING MAGNETIZED NEUTRON STARS

This paper presents a numerical study over a wide parameter space of the likelihood of dynamical bar-mode instability in differentially rotating magnetized neutron stars. The innovative aspect of this study is the incorporation of magnetic fields in such a context, which have thus far been neglected in the purely hydrodynamical simulations available in the literature. The investigation uses the Cosmos++ code which allows us to perform three-dimensional simulations on a cylindrical grid at high resolution. A sample of Newtonian magnetohydrodynamical simulations starting from a set of models previously analyzed by other authors without magnetic fields has been performed, providing estimates of the effects of magnetic fields on the dynamical bar-mode deformation of rotating neutron stars. Overall, our results suggest that the effect of magnetic fields is not likely to be very significant in realistic configurations. Only in the most extreme cases are the magnetic fields able to suppress growth of the bar mode.

79 ASTRONOMY AND ASTROPHYSICS↗

Analytic solutions for single and multiple cylinders of gravitating polytropes in magnetostatic equilibrium

Exact analytic solutions for the static equilibrium of a gravitating plasma polytrope in the presence of magnetic fields are presented. The means of generating various equilibrium configurations to illustrate directly the complex physical relationships between pressure, magnetic fields, and gravity in self-gravitating systems is demonstrated. One of the solutions is used to model interstellar clouds suspended by magnetic fields against the galactic gravity such as may be formed by the Parker (1966) instability. It is concluded that the pinching effect of closed loops of magnetic fields in the clouds may be a dominant agent in further collapsing the clouds following their formation.

Lerche, I.↗

Performance of a Permanent-Magnet Cylindrical Hall-Effect Thruster

The performance of a low-power cylindrical Hall thruster, which more readily lends itself to miniaturization and low-power operation than a conventional (annular) Hall thruster, was measured using a planar plasma probe and a thrust stand. The field in the cylindrical thruster was produced using permanent magnets, promising a power reduction over previous cylindrical thruster iterations that employed electromagnets to generate the required magnetic field topology. Two sets of ring-shaped permanent magnets are used, and two different field configurations can be produced by reorienting the poles of one magnet relative to the other. A plasma probe measuring ion flux in the plume is used to estimate the current utilization for the two magnetic topologies. The measurements indicate that electron transport is impeded much more effectively in one configuration, implying higher thrust efficiency. Thruster performance measurements on this configuration were obtained over a power range of 70-350 W and with the cathode orifice located at three different axial positions relative to the thruster exit plane. The thrust levels over this power range were 1.25-6.5 mN, with anode efficiencies and specific impulses spanning 4-21% and 400-1950 s, respectively. The anode efficiency of the permanent-magnet thruster compares favorable with the efficiency of the electromagnet thruster when the power consumed by the electromagnets is taken into account.

Polzin, K. A.↗

Full particle orbit effects in regular and stochastic magnetic fields

Here we present a numerical study of charged particle motion in a time-independent magnetic field in cylindrical geometry. The magnetic field model consists of an unperturbed reversed-shear (non-monotonic q-profile) helical part and a perturbation consisting of a superposition of modes. Contrary to most of the previous studies, the particle trajectories are computed by directly solving the full Lorentz force equations of motion in a six-dimensional phase space using a sixth-order, implicit, symplectic Gauss-Legendre method. The level of stochasticity in the particle orbits is diagnosed using averaged, effective Poincare sections. It is shown that when only one mode is present, the particle orbits can be stochastic even though the magnetic field line orbits are not stochastic (i.e., fully integrable). The lack of integrability of the particle orbits in this case is related to separatrix crossing and the breakdown of the global conservation of the magnetic moment. Some perturbation consisting of two modes creates resonance overlapping, leading to Hamiltonian chaos in magnetic field lines. Then, the particle orbits exhibit a nontrivial dynamics depending on their energy and pitch angle. It is shown that the regions where the particle motion is stochastic decrease as the energy increases. The non-monotonicity of the q-profile implies the existence of magnetic ITBs (internal transport barriers) which correspond to shearless flux surfaces located in the vicinity of the q-profile minimum. It is shown that depending on the energy, these magnetic ITBs might or might not confine particles. That is, magnetic ITBs act as an energy-dependent particle confinement filter. Magnetic field lines in reversed-shear configurations exhibit topological bifurcations (from homoclinic to heteroclinic) due to separatrix reconnection. Finally, we show that a similar but more complex scenario appears in the case of particle orbits that depend in a non-trivial way on the energy and pitch angle of the particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Highly asymmetric magnetic behavior in exchange biased systems induced by non-collinear field cooling.

A detailed study of the angular dependence of the magnetization reversal in polycrystalline ferromagnetic (FM)/antiferromagnetic Co/IrMn bilayers with noncollinear FM and unidirectional anisotropies shows a peculiar asymmetric magnetic behavior. The anisotropy configuration is set via a field cooling (FC) procedure with the magnetic field misaligned with respect to the easy magnetization direction of the FM layer. Different magnetization reversal modes are observed for either positive or negative angles with respect to the FC direction. The angular dependence of both coercivity and exchange bias also clearly displays the broken symmetry of the induced noncollinearity. Our findings are reproduced with a modified Stoner-Wohlfarth model including the induced anisotropy configuration. Our results highlight the importance of the relative angle between anisotropies in exchange bias systems, opening a new path for the tailoring of their magnetic properties.

36 MATERIALS SCIENCE↗

Exploring the fusion power plant design space: comparative analysis of positive and negative triangularity tokamaks through optimization

The optimal configuration choice between positive triangularity (PT) and negative triangularity (NT) tokamaks for fusion power plants hinges on navigating different operational constraints rather than achieving specific plasma performance metrics. This study presents a systematic comparison using constrained multi-objective optimization with the integrated FUsion Synthesis Engine (FUSE) framework. Over 200 000 integrated design evaluations were performed exploring the trade-offs between capital cost minimization and operational reliability (maximizing q 95 ) while satisfying engineering constraints including 250 ± 50 MW net electric power, tritium breeding ratio > 1.1, power exhaust limits and an hour flattop time. Both configurations achieve similar cost-performance Pareto fronts through contrasting design philosophies. PT, while demonstrating resilience to pedestal degradation (compensating for up to 40% reduction), are constrained to larger machines (R 0 > 6.5 m) by the narrow operational window between L–H threshold requirements and the research-established power exhaust limit (P sol /R < 15 MW m –1 ). This forces optimization through comparatively reduced magnetic field (∼8 T). NT configurations exploit their freedom from these constraints to access compact, high-field designs (R 0 ~ 5.5 m, B 0 >12 T), creating natural synergy with advancing HTS technology. Sensitivity analyses reveal that PT’s economic viability depends critically on uncertainties in L–H threshold scaling and power handling limits. Notably, a 50% variation in either could eliminate viable designs or enable access to the compact design space. These results suggest configuration selection should be risk-informed: PT offers the lowest-cost path when operational constraints can be confidently predicted, while NT is robust to large variations in constraints and physics uncertainties.

FUSE framework↗

Measurements of impulsive reconnection driven by nonlinear Hall dynamics

The magnetic fields associated with reconnection in the edge of the reversed field pinch configuration have been measured in the Madison Symmetric Torus. The measured magnetic field structure is compared with theoretical predictions computed in both toroidal and cylindrical geometries. The summation of multiple modes has been accomplished to reveal a complex but still coherent edge structure. Key terms of relevant Ohm's law are accessible from magnetic field measurement and reveal the ordering [(1/ne)JxB>>E>{eta}J], which implies that two fluid effects are important in the physics governing this reconnection. Further, it is seen that the nonlinear three-wave coupling of the Hall term acts as a driving mechanism for this linearly stable mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CONDITIONS FOR TRANSVERSE WAVES PROPAGATION ALONG THIN MAGNETIC FLUX TUBES ON THE SUN

The propagation of kink waves in the thin gravity stratified flux tubes with a generalized magnetic field distribution model is considered in cylindrical geometry. The new kink wave equations for both wave variables are obtained. It is shown that the inclusion of the radial component of an unperturbed tube magnetic field sufficiently transforms the conditions for the propagation of transverse waves. It is demonstrated that, for the models of isothermal and polytropic atmosphere in the tube and its environment, the propagation of kink waves along thin magnetic flux tubes is cutoff-free.

79 ASTRONOMY AND ASTROPHYSICS↗

System and method for manipulating domain pinning and reversal in ferromagnetic materials

A method for manipulating domain pinning and reversal in a ferromagnetic material comprises applying an external magnetic field to a uniaxial ferromagnetic material comprising a plurality of magnetic domains, where each domain has an easy axis oriented along a predetermined direction. The external magnetic field is applied transverse to the predetermined direction and at a predetermined temperature. The strength of the magnetic field is varied at the predetermined temperature, thereby isothermally regulating pinning of the domains. A magnetic storage device for controlling domain dynamics includes a magnetic hard disk comprising a uniaxial ferromagnetic material, a magnetic recording head including a first magnet, and a second magnet. The ferromagnetic material includes a plurality of magnetic domains each having an easy axis oriented along a predetermined direction. The second magnet is positioned adjacent to the magnetic hard disk and is configured to apply a magnetic field transverse to the predetermined direction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental study of a radial plasma source

A radially outward acceleration of plasma in cylindrical geometry along an applied electric field and across an axial magnetic field is studied. The configuration, coined a radial plasma source, consists of two ceramic disks positioned parallel to each other, between which a cylindrical molybdenum anode is mounted. The electric field is generated by applying a voltage between the anode and a heated cathode neutralizer that is located away from the ceramic disks. The plasma diagnostic system includes Langmuir probes, an emissive probe, and a balance force meter. The discharge voltage is found to increase when the magnetic field is increased or when the mass flow rate (and the pressure) is decreased. For a discharge current of 1.4 A, the discharge voltage increases from 55 to 120 V when the magnetic field is increased from 0 to 186 G. The azimuthal uniformity of the plasma flow is found to decrease with the increase in gas pressure. The force exerted on the balance force meter is found to be larger than the force exerted by the plasma flow. This disparity indicates that a considerable part of the force is exerted by the neutral gas, which has gained momentum from the plasma via ion-neutral collisions. The force is increased because the momentum delivered for a given deposited power is larger if the energy is deposited in a larger mass, as happens here through plasma collisions. We estimate theoretically the expected force at the collisionless and the collisional limits and find that the measured force is between the expected forces at the two limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The global heliosphere: A parametric study

As the Pioneer 10 and 11 and Voyager 1 and 2 spacecraft continue their penetration into the outer heliosphere, more attention has been focused on the nature of the solar wind interaction with the Very Local Interstellar Medium (VLISM). Since the initial pioneering concepts of Davis in 1955 and Parker in the early 1960's both in situ and remote measurements have led to various constraints that do not fit well into a coherent picture. To provide a context for these various observable constraints, we have adapted an explicitly time-dependent, explicitly three-dimensional magnetohydrodynamic (MHD) code to simulate the dependence of the heliospheric configuration and interaction with the VLISM on the properties of the external medium. The code also allows us to study temporal variations brought about by both short- and long-term changes in the solar wind and/or VLISM properties. We will discuss some of the initial results from this new effort and implications for the distances inferred to the termination shock and heliopause boundary. In particular, we will consider the effect of the Very Local Interstellar Magnetic Field (VLIMF) on the configuration and compare it with inferences from observations of outer heliosphere cosmic rays and the Very Low Frequency (VLF) outer heliospheric radio emissions.

McNutt, R. L., Jr.↗

The escape of magnetic flux from a turbulent body of gas

Topological conditions on the surface of a turbulent body of highly conductive fluid under which escape of magnetic force lines would be impossible (Drobyshevski, Yuferev 1974) are studied with exact calculation of intermediate field configurations as a possible explanation of the decay of stellar magnetic fields via turbulent mixing. It is shown that upward escape of magnetic force lines in the regions between convective cells is possible through rapid reconnection of the force lines (studied as neutral point annihilation) such as occurs continually in rapidly evolving sunspot groups. It is concluded that there exists no topological barrier to the escape of magnetic flux from the sun or from the local galaxy.

Parker, E. N.↗

Actuation method and apparatus, micropump, and PCR enhancement method

An actuation apparatus includes at least one magnetic shape memory (MSM) element containing a material configured to expand and/or contract in response to exposure to a magnetic field. Among other things, the MSM element may be configured to pump fluid through a micropump by expanding and/or contracting in response to the magnetic field. The magnetic field may rotate about an axis of rotation and exhibit a distribution having a component substantially perpendicular to the axis of rotation. Further, the magnetic field distribution may include at least two components substantially orthogonal to one another lying in one or more planes perpendicular to the axis of rotation. The at least one MSM element may contain nickel, manganese, and gallium. A polymerase chain reaction (PCR) may be enhanced by contacting a PCR reagent and DNA material with the MSM element.

36 MATERIALS SCIENCE↗

Full Simulation of CMS for Run-3 and Phase-2

In this contribution we report the status of the CMS Geant4 simulation and the prospects for Run-3 and Phase-2. Firstly, we report about our experience during the start of Run-3 with Geant4 10.7.2, the common software package DD4hep for geometry description, and VecGeom runtime geometry library. In addition, FTFP_BERT_EMM Physics List and CMS configuration for tracking in magnetic field have been utilized. For the first time, for the Grid mass production of Monte-Carlo, this combination of components is used. Further simulation improvements are under development targeting Run-3 such as the switch to the new Geant4 11.1 in production, that provides several features important for the optimization of simulation, for example the new transportation process with built-in multiple scattering, neutron general process, custom tracking manager, G4HepEm sub-library, and others. We will present evaluation of various options, validation results, and the final choice of simulation configuration for 2023 production and beyond. The performance of the CMS full simulation for Run-2 and Run-3 will also be discussed. CMS development plan for the Phase-2 Geant4 based simulation is very ambitious, and it includes a new geometry description, physics, and simulation configurations. The progress on new detector descriptions and full simulation will be presented as well as the R&D in progress to reduce compute capacity needs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗