Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Instability of nonlinear Trivelpiece-Gould waves. II. Weakly trapped particles

This paper discusses a novel parametric instability mechanism caused by particles that are weakly trapped in the potential wells of a nonlinear “pump” wave. The pump wave is unstable to the growth of daughter waves with longer wavelength and nearly the same phase velocity as the pump. This induces adjacent potential peaks in the wave to slowly approach one-another, receding from other pairs of peaks. Particles that are weakly trapped between approaching peaks, with kinetic energies just below the potential maxima, are heated by compression and escape the well, and then become retrapped on the other side of the approaching peaks, where they amplify the compression by pushing the peaks together. The mechanism applies to low-collisionality plasmas supporting waves with near-acoustic dispersion relations such as ion sound waves, magnetized Langmuir waves, or Alfven waves. The theory is compared to particle in cell simulations of TrivelpieceGould (TG) traveling waves, as well as to experiments on pure ion plasmas that observe parametric instability in TG standing waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Mapping twist-tuned multiband topology in bilayer WSe 2

Semiconductor moiré superlattices have been shown to host a wide array of interaction-driven ground states. However, twisted homobilayers have been difficult to study in the limit of large moiré wavelengths, where interactions are most dominant. In this study, we conducted local electronic compressibility measurements of twisted bilayer WSe 2 (tWSe 2 ) at small twist angles. We demonstrated multiple topological bands that host a series of Chern insulators at zero magnetic field near a “magic angle” around 1.23°. Using a locally applied electric field, we induced a topological quantum-phase transition at one hole per moiré unit cell. Finally, our work establishes the topological phase diagram of a generalized Kane-Mele-Hubbard model in tWSe 2 , demonstrating a tunable platform for strongly correlated topological phases.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Plasma Energization in Colliding Magnetic Flux Ropes

Magnetic flux ropes are commonly observed throughout the heliosphere, and recent studies suggest that interacting flux ropes are associated with some energetic particle events. In this work, we carry out 2D particle-in-cell (PIC) simulations to study the coalescence of two magnetic flux ropes (or magnetic islands), and the subsequent plasma energization processes. The simulations are initialized with two magnetic islands embedded in a reconnecting current sheet. The two islands collide and eventually merge into a single island. Particles are accelerated during this process as the magnetic energy is released and converted to the plasma energy, including bulk kinetic energy increase by the ideal electric field, and thermal energy increase by the fluid compression and the nonideal electric field. We find that contributions from these different energization mechanisms are all important and comparable with each other. Fluid shear and a nongyrotropic pressure tensor also contribute to the energy conversion process. For simulations with different box sizes ranging from $L_x$ ~ 25–100$d_i$ and ion-to-electron mass ratios $m_i /m_e$ = 25,100, and 400, we find that the general evolution is qualitatively the same for all runs, and the energization depends only weakly on either the system size or the mass ratio. The results may help us understand plasma energization in solar and heliospheric environments.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

Moon-magnetosphere interaction and estimates of possible lunar core size

It is shown that estimates of the size of a possible lunar core are negligibly affected by currents due to a directed plasma flux toward the moon. A theory for the compression of an induced lunar dipole by an incoming sub-Alfvenic flux of cold plasma is presented for the time-independent case where the external magnetic field, induced dipole moment, and plasma velocity vector are all aligned, and it is demonstrated that, at very long time periods, effects due to the inertia of an incoming flow of cold plasma can be ignored. A theory for time-dependent fluctuations in a stationary plasma is modified to include the effects of incoming flux.

Goldstein, B. E.↗
NASA NTRS1983

Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as liquid pumping and internal compression. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

A. J Juhasz↗
NASA NTRS1983

Methods of reducing energy consumption of the oxidant supply system for MHD/steam power plants

An in-depth study was conducted to identify possible improvements to the oxidant supply system for combined cycle MHD power plants which would lead to higher thermal efficiency and reduction in the cost of electricity, COE. Results showed that the oxidant system energy consumption could be minimized when the process was designed to deliver a product O2 concentration of 70 mole percent. The study also led to the development of a new air separation process, referred to as 'liquid pumping and internal compression'. MHD system performance calculations show that the new process would permit an increase in plant thermal efficiency of 0.6 percent while allowing more favorable tradeoffs between magnetic energy and oxidant system capacity requirements.

Juhasz, A. J.↗
NASA NTRS1991

Propulsion simulator for magnetically-suspended wind tunnel models

The objective of phase two of a current investigation sponsored by NASA Langley Research Center is to demonstrate the measurement of aerodynamic forces/moments, including the effects of exhaust gases, in magnetic suspension and balance system (MSBS) wind tunnels. Two propulsion simulator models are being developed: a small-scale and a large-scale unit, both employing compressed, liquified carbon dioxide as propellant. The small-scale unit was designed, fabricated, and statically-tested at Physical Sciences Inc. (PSI). The large-scale simulator is currently in the preliminary design stage. The small-scale simulator design/development is presented, and the data from its static firing on a thrust stand are discussed. The analysis of this data provides important information for the design of the large-scale unit. A description of the preliminary design of the device is also presented.

Joshi, Prakash B.↗
NASA NTRS1993

Solar wind control of the distant magnetotail: ISEE 3

During a 40-day period in 1983, International Sun Earth Explorer 3 (ISEE 3) was located about 225 R(sub E) behind the Earth and remained within 12 R(sub E) of the nominal tail axis. During this time the spacecraft spent at least 70% of its time in the magnetotail with occasional excursions into the magnetosheath. However, during five geomagnetically distrubed intervals of 1 - 3 days duration during this period, ISEE 3 remained within the magnetosheath for extended intervals, even when it was very near the center of an average tail. Simultaneous observations of the solar wind direction and thermal pressure suggest that nonradial solar wind flow associated with interacting solar wind streams moves a compressed tail away from the nominal position at these times and explains most of these observations. However, during several few-hour intervals of strongly northward interplanetary magnetic field (IMF) within these periods, the solar wind is more radial and cannot explain the residence of the spacecraft in the magnetosheath. At these times ISEE 3 seems to be moving back and forth between two regions, one a higher-density, lower-temperature magnetosheathlike region but with density somewhat lower than the normal magnetosheath, the other a lower-density, higher-temperature taillike region but with density higher than the normal tail. Both regions have larger B(sub z) components and B(sub x) components that tend to vary as if the spacecraft were moving from one hemisphere of the tail to the other. It is suggested that the magnetotail at these times of northward IMF consists mostly of field lines that close Earthward of the spacecraft with a narrow remaining tail at 225 R(sub E) waving back and forth across the spacecraft. If relatively rare intervals of long-duration, very northward IMF can eliminate the extended tail, it seems likely that more common, less northward IMF might well have very important, though less drastic, effects on the tail configurations.

Fairfield, D. H.↗
DOE OSTI2015

Guiding and focusing of fast electron beams produced by ultra-intense laser pulse using a double cone funnel target

A novel double cone funnel target design aiming at efficiently guiding and focusing fast electron beams produced in high intensity (>10{sup 19 }W/cm{sup 2}) laser-solid interactions is investigated via two-dimensional particle-in-cell simulations. The forward-going fast electron beams are shown to be directed and focused to a smaller size in comparison with the incident laser spot size. This plasma funnel attached on the cone target guides and focuses electrons in a manner akin to the control of liquid by a plastic funnel. Such device has the potential to add substantial design flexibility and prevent inefficiencies for important applications such as fast ignition. Two reasons account for the collimation of fast electron beams. First, the sheath electric fields and quasistatic magnetic fields inside the vacuum gap of the double cone provide confinement of the fast electrons in the laser-plasma interaction region. Second, the interface magnetic fields inside the beam collimator further guide and focus the fast electrons during the transport. The application of this technique to cone-guided fast ignition is considered, and it is shown that it can enhance the laser energy deposition in the compressed fuel plasma by a factor of 2 in comparison with the single cone target case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Retaining large and adjustable elastic strains of kilogram-scale Nb nanowires [Better Superconductor by Elastic Strain Engineering: Kilogram-scale Free-Standing Niobium Metal Composite with Large Retained Elastic Strains]

Crystals held at ultrahigh elastic strains and stresses may exhibit exceptional physical and chemical properties. Individual metallic nanowires can sustain ultra-large elastic strains of 4-7%. However, retaining elastic strains of such magnitude in kilogram-scale nanowires is challenging. Here, we find that under active load, ~5.6% elastic strain can be achieved in Nb nanowires in a composite material. Moreover, large tensile (2.8%) and compressive (-2.4%) elastic strains can be retained in kilogram-scale Nb nanowires when the composite is unloaded to a free-standing condition. It is then demonstrated that the retained tensile elastic strains of Nb nanowires significantly increase their superconducting transition temperature and critical magnetic fields, corroborating ab initio calculations based on BCS theory. This free-standing nanocomposite design paradigm opens new avenues for retaining ultra-large elastic strains in great quantities of nanowires and elastic-strain-engineering at industrial scale.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Optimization of Regenerators for AMRR Systems

Active Magnetic Regenerative Refrigeration (AMRR) systems have no direct global warming potential or ozone depletion potential and hold the potential for providing refrigeration with efficiencies that are equal to or greater than the vapor compression systems used today. The work carried out in this project has developed and improved modeling tools that can be used to optimize and evaluate the magnetocaloric materials and geometric structure of the regenerator beds required for AMRR Systems. There has been an explosion in the development of magnetocaloric materials for AMRR systems over the past few decades. The most attractive materials, based on the magnitude of the measured magnetocaloric effect, tend to also have large amounts of hysteresis. This project has provided for the first time a thermodynamically consistent method for evaluating these hysteretic materials in the context of an AMRR cycle. An additional, practical challenge that has been identified for AMRR systems is related to the participation of the regenerator wall in the cyclic process. The impact of housing heat capacity on both passive and active regenerative systems has been studied and clarified within this project. This report is divided into two parts corresponding to these two efforts. Part 1 describes the work related to modeling magnetic hysteresis while Part 2 discusses the modeling of the heat capacity of the housing. A key outcome of this project is the development of a publicly available modeling tool that allows researchers to identify a truly optimal magnetocaloric refrigerant. Typically, the refrigeration potential of a magnetocaloric material is judged entirely based on the magnitude of the magnetocaloric effect and other properties of the material that are deemed unimportant. This project has shown that a material with a large magnetocaloric effect (as evidenced, for example, by a large adiabatic temperature change) may not be optimal when it is accompanied by a large hysteresis. The trade-off between these various material properties and the proper design of an AMRR system can only be evaluated correctly using the comprehensive, physics-based model developed by this project. The development of these modeling tools and optimization studies will provide the knowledge base that is required to achieve transformational discoveries. The widespread adoption of AMRR technology will change the character of energy demand in this country and provide manufacturing jobs as well as employment associated with retrofitting existing HVAC&R applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

A Transition from Localized to Strongly Correlated Electron Behavior and Mixed Valence Driven by Physical or Chemical Pressure in ACo2As2 (A = Eu and Ca)

We demonstrate that the action of physical pressure, chemical compression, or aliovalent substitution in ACo(2)As(2) (A = Eu and Ca) has a general consequence of causing these antiferromagnetic materials to become ferromagnets. In all cases, the mixed valence triggered at the electropositive A site results in the increase of the Co 3d density of states at the Fermi level. Remarkably, the dramatic alteration of magnetic behavior results from the very minor (<0.15 eleetron) change in the population of the 3d orbitals. The mixed valence state of En observed in the high-pressure (HP) form of EuCo2As2 exhibits a remarkable stability, achieving the average oxidation state of +2.25 at 12.6 GPa. In the case of CaCo2As2, substituting even 10% of Eu or La into the Ca site causes ferromagnetic ordering of Co moments. Similar to HP-EuCo2As2, the itinerant 3d ferromagnetism emerges from electronic doping into the Co layer because of chemical compression of Eu sites in Ca0.9Eu0.1Co1.91As2 or direct electron doping in Ca0.85La0.15Co1.89As2. The results reported herein demonstrate the general possibility of amplifying minor localized electronic effects to achieve major changes in material's properties via involvement of strongly correlated electrons.

Tan, Xiaoyan↗
DOE OSTI2021

Reconstructing 3D asymmetries in laser-direct-drive implosions on OMEGA

Three-dimensional reconstruction algorithms have been developed which determine the hot-spot velocity, hot-spot apparent ion temperature distribution, and fuel areal density distribution present in laser-direct-drive inertial con finement fusion implosions on the OMEGA laser. These reconstructions rely on multiple independent measurements of the neutron energy spectrum emitted from the fusing plasma. Measurements of the neutron energy spectrum on OMEGA are made using a suite of quasi-orthogonal neutron time-of-flight detectors and a magnetic recoil spectrometer. These spectrometers are positioned strategically around the OMEGA target chamber to provide unique 3-D measurements of the conditions of the fusing hot spot and compressed fuel near peak compression. Here, the uncertainties involved in these 3-D reconstructions are discussed and are used to identify a new nTOF diagnostic line of sight which when built will reduce the uncertainty in the hot-spot apparent ion temperature distribution from 0.7 to < 0.4 keV.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Symmetry progression and band vs Mott character of CdPS 3 under pressure

Complex chalcogenides are renowned for their tunable electronic, magnetic, and optical properties under external stimuli. The MPX 3 family (M = Mn, Ni, Co, V; X = S, Se) is a platform for many exciting discoveries—especially under compression—although CdPS3 is thought to be different because the Cd center possesses a filled 4d shell, which precludes Mottness. Here, we combine synchrotron-based infrared absorbance and Raman scattering spectroscopies with diamond anvil cell techniques, complementary lattice dynamics calculations, and an analysis of the energy landscape to reveal a series of structural phase transitions in CdPS 3 . We find four distinct pressure-driven transitions, with low frequency modes detectable over the full 35 GPa range of our investigation. A group–subgroup analysis along with our first-principles calculations allows us to partially unravel the space group sequence. For instance, the first critical pressure is a monoclinic C2/m to trigonal $\overline{R}$3 transition at 10 GPa. Despite the softness and overall sensitivity to pressure, we do not locate an insulator-to-metal transition in this pressure range, indicating that the energy scale for gap closure is significantly higher than expected. We discuss these findings in terms of force-induced color change and Mott vs band character in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Epitaxial strain modulated electronic properties of interface controlled nickelate superlattices

For this study, perovskite nickelate heterostructures consisting of single unit cells of EuNiO 3 and LaNiO 3 have been grown on a set of single crystalline substrates by pulsed laser interval deposition to investigate the effect of epitaxial strain on electronic and magnetic properties at the extreme interface limit. Despite the variation of substrate in-plane lattice constants and lattice symmetry, the structural response to heterostructuring is primarily controlled by the presence of the EuNiO 3 layer. In sharp contrast to bulk LaNiO 3 or EuNiO 3 , the superlattices grown under tensile strains exhibit metal-to-insulator transitions (MIT) below room temperature. The onset of magnetic and electronic transitions associated with the MIT can be further separated by application of large tensile strain. Furthermore, these transitions can be entirely suppressed by very small compressive strain. X-ray resonant absorption spectroscopy measurements reveal that such strain-controlled MIT is directly linked to a strain-induced self-doping effect without any chemical doping.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Material Properties for the Interiors of Massive Giant Planets and Brown Dwarfs

Here, we present thermodynamic material and transport properties for the extreme conditions prevalent in the interiors of massive giant planets and brown dwarfs. They are obtained from extensive ab initio simulations of hydrogen–helium mixtures along the isentropes of three representative objects. In particular, we determine the heat capacities, the thermal expansion coefficient, the isothermal compressibility, and the sound velocity. Important transport properties such as the electrical and thermal conductivity, opacity, and shear viscosity are also calculated. Further results for associated quantities, including magnetic and thermal diffusivity, kinematic shear viscosity, as well as the static Love number k 2 and the equidistance, are presented. In comparison to Jupiter-mass planets, the behavior inside massive giant planets and brown dwarfs is stronger dominated by degenerate matter. We discuss the implications on possible dynamics and magnetic fields of those massive objects. The consistent data set compiled here may serve as a starting point to obtain material and transport properties for other substellar H–He objects with masses above one Jovian mass and finally may be used as input for dynamo simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Reconstructing 3-D Asymmetries in Laser-Direct-Drive Implosions on OMEGA

Three-dimensional reconstruction algorithms have been developed which determine the hot-spot velocity, hot-spot apparent ion temperature distribution, and fuel areal-density distribution present in laser-direct- drive inertial confinement fusion implosions on the OMEGA laser. These reconstructions rely on multiple independent measurements of the neutron energy spectrum emitted from the fusing plasma. Measurements of the neutron energy spectrum on OMEGA are made using a suite of quasi-orthogonal neutron time-of-flight detectors and a magnetic recoil spectrometer. These spectrometers are positioned strategically around the OMEGA target chamber to provide unique 3-D measurements of the conditions of the fusing hot spot and compressed fuel near peak compression. The uncertainties involved in these 3-D reconstructions are discussed and are used to identify a new nTOF diagnostic line of sight which when built will reduce the uncertainty in the hot-spot apparent ion temperature distribution from 700 to <400 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2012

Hot Flow Anomalies at Venus

We present a multi-instrument study of a hot flow anomaly (HFA) observed by the Venus Express spacecraft in the Venusian foreshock, on 22 March 2008, incorporating both Venus Express Magnetometer and Analyzer of Space Plasmas and Energetic Atoms (ASPERA) plasma observations. Centered on an interplanetary magnetic field discontinuity with inward convective motional electric fields on both sides, with a decreased core field strength, ion observations consistent with a flow deflection, and bounded by compressive heated edges, the properties of this event are consistent with those of HFAs observed at other planets within the solar system.

Venusian↗