Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Solid Solution Effects on the MgAl2O4-MgGa2O4 System

Phase relations between two spinel compounds (MgAl2O4 and MgGa2O4) were studied. Stoichiometric MgAl2O4 was formed in the laboratory through a coprecipitation method. Complete solid solution formation int eh MgAl2O4-MgGa2O4 systems was confirmed through X-ray diffraction analysis. Solid solution between MgAl2O4-MgGa2O4 decreases thermal conductivity at all temperatures up to 900oC. At 200oC with 10 mol% additoin of MgGa2O4 thermal conductivity decreases approximately 25%, and at 900oC there was still an 8% decrease. Additionally, preliminary studies show that porosity between 5% and 10% does not have an appreciable effect on the thermal conductivity in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic magnetoresistance and current-perpendicular-to-plane giant magnetoresistance in epitaxial NiMnSb-based multilayers

We fabricated (001)-oriented C1{sub b}-NiMnSb epitaxial films on MgO substrate by a magnetron sputtering system and systematically investigated the structure, magnetic property, and anisotropic magnetoresistance (AMR) effect. NiMnSb film was deposited using a stoichiometric NiMnSb target which has Mn-deficient (Mn ∼ 28.7 at. %) off-stoichiometric composition ratio. We have investigated bulk spin-polarization in NiMnSb films by measuring AMR on the basis of recent study for half-metallic L2{sub 1}-Heusler compounds. Although the negative sign of AMR ratio, which is indicative of half-metallic nature, was observed in the single layer NiMnSb films, the magnitude of AMR ratio (−0.10% at RT) was about half of the largest value reported for half-metallic L2{sub 1}-Heusler compounds. The current-perpendicular-to-plane (CPP) giant magnetoresistance (GMR) devices of NiMnSb/Ag/NiMnSb show MR ratio of 13.2% at 10 K and 4.2% at 300 K, which is higher than the previous result for NiMnSb/Cu/NiMnSb CPP-GMR devices [Caballero et al., J. Magn. Magn. Mater. 198–199, 55 (1999)], but much less than the CPP-GMR using L2{sub 1}-Heusler electrodes. The reduction of intrinsic bulk spin-polarization originating from the Mn-deficiency in NiMnSb layer is expected to be the main reason for small MR values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly Reversible Mg Insertion in Nanostructured Bi for Mg Ion Batteries

Rechargeable magnesium batteries have attracted wide attention for energy storage. Currently, most studies focus on Mg metal as the anode, but this approach is still limited by the properties of the electrolyte and poor control of the Mg plating/stripping processes.1,2 Here we report the synthesis and application of Bi nanotubes as a high performance anode material for rechargeable Mg ion batteries. The nanostructured Bi anode delivers a high reversible specific capacity (350 mAh/gBi, or 3430 mAh/cm3 Bi), excellent stability, and high columbic efficiency (95 % initial and very close to 100% afterwards). The good performance is attributed to the unique properties of in-situ formed, interconnected nanoporous bismuth. Such nanostructures can effectively accommodate the large volume change without losing electric contact and significantly reduce diffusion length for Mg2+. Significantly, the nanostructured Bi anode can be used with conventional electrolytes which will open new opportunities to study Mg ion battery chemistry and further improve the properties. The performance and the stability of a full cell Mg ion battery have been demonstrated with conventional electrolytes. This work suggests that other high energy density alloy compounds may also be considered for Mg-ion chemistry for high capacity electrode materials.

Environmental Molecular Sciences Laboratory↗

High-pressure transitions in MgAl{sub 2}O{sub 4} and a new high-pressure phase of Mg{sub 2}Al{sub 2}O{sub 5}

Phase transitions in MgAl{sub 2}O{sub 4} were examined at 21-27 GPa and 1400-2500 deg. C using a multianvil apparatus. A mixture of MgO and Al{sub 2}O{sub 3} corundum that are high-pressure dissociation products of MgAl{sub 2}O{sub 4} spinel combines into calcium-ferrite type MgAl{sub 2}O{sub 4} at 26-27 GPa and 1400-2000 deg. C. At temperature above 2000 deg. C at pressure below 25.5 GPa, a mixture of Al{sub 2}O{sub 3} corundum and a new phase with Mg{sub 2}Al{sub 2}O{sub 5} composition is stable. The transition boundary between the two fields has a strongly negative pressure-temperature slope. Structure analysis and Rietveld refinement on the basis of the powder X-ray diffraction profile of the Mg{sub 2}Al{sub 2}O{sub 5} phase indicated that the phase represented a new structure type with orthorhombic symmetry (Pbam), and the lattice parameters were determined as a=9.3710(6) A, b=12.1952(6) A, c=2.7916(2) A, V=319.03(3) A{sup 3}, Z=4. The structure consists of edge-sharing and corner-sharing (Mg, Al)O{sub 6} octahedra, and contains chains of edge-sharing octahedra running along the c-axis. A part of Mg atoms are accommodated in six-coordinated trigonal prism sites in tunnels surrounded by the chains of edge-sharing (Mg, Al)O{sub 6} octahedra. The structure is related with that of ludwigite (Mg, Fe{sup 2+}){sub 2}(Fe{sup 3+}, Al)(BO{sub 3})O{sub 2}. The molar volume of the Mg{sub 2}Al{sub 2}O{sub 5} phase is smaller by 0.18% than sum of molar volumes of 2MgO and Al{sub 2}O{sub 3} corundum. High-pressure dissociation to the mixture of corundum-type phase and the phase with ludwigite-related structure has been found only in MgAl{sub 2}O{sub 4} among various A{sup 2+}B{sup 3+}{sub 2}O{sub 4} compounds. - Graphical abstract: MgAl{sub 2}O{sub 4} dissociates into a mixture of Al{sub 2}O{sub 3} corundum and a new high-pressure phase of Mg{sub 2}Al{sub 2}O{sub 5} at high pressures and temperatures. The Mg{sub 2}Al{sub 2}O{sub 5} phase represents a new structure type with orthorhombic symmetry, showing the projection to (0 0 1) plane. The structure consists of edge- and corner-shared (Mg, Al)O{sub 6} octahedra, and contains chains of edge-shared octahedra running along the c-axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} (0.17≤x≤0.66) and its Cu-doping effect

In recent years, the materials in the B–Mg–Ni system have been intensively studied due to their excellent properties of hydrogen storage and superconductivity. Solving the crystal structure of phases in this system will facilitate an understanding of the mechanism of their physical properties. In this study, we report the preparation, crystal structure and physical properties of a new ternary phase Mg{sub 3+x}Ni{sub 7−x}B{sub 2} in the B–Mg–Ni system. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase was prepared by solid-state reactions at 1073 K and its crystal structure was determined and refined using X-ray powder diffraction data. The Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase crystallizes in the Ca{sub 3}Ni{sub 7}B{sub 2} structure type (space group R-3m, no. 166) with a=4.9496(3)–5.0105(6) Å, c=20.480(1)–20.581(1) Å depending on the x value, where x varies from 0.17 to 0.66. Two samples with nominal compositions Mg{sub 10}Ni{sub 20}B{sub 6} and Mg{sub 12}Ni{sub 18}B{sub 6} were characterized by magnetization and electric resistivity measurements in the temperature range from 5 K to room temperature. Both samples exhibited metallic behavior and showed spin-glass-like behavior with a spin freezing temperature (T{sub f}) around 33 K. A study of the Cu-doping effect showed that limited Cu content can be doped into the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} compound and T{sub f} decreases as the Cu content increases. - Graphical abstract: The crystal structure of the Mg{sub 3+x}Ni{sub 7−x}B{sub 2} phase. - Highlights: • The crystal structure and solid solution range of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were revealed. • The magnetization and electrical resistivity of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} were studied. • The Cu-doping effect of Mg{sub 3+x}Ni{sub 7−x}B{sub 2} was investigated.

36 MATERIALS SCIENCE↗

Astrophysics studies relevant to stellar x-ray bursts

Two reactions of {sup 14}O(α,p){sup 17}F and {sup 18}Ne(α,p){sup 21}Na provide the pathways for breakout from the hot CNO cycles to the rp-process in type I X-ray bursts. To better determine their astrophysical reaction rates, resonance parameters of the compound nuclei {sup 18}Ne and {sup 22}Mg have been investigated by the resonant elastic scattering of {sup 17}F+p and {sup 21}Na+p, respectively. The {sup 17}F and {sup 21}Na radioactive ion beams were produced at the CNS Radioactive Ion Beam Separator and impinged on the thick proton targets. The excitation functions were obtained with a thick-target method over a wide excitation energy range. The resonance parameters in the compound nuclei {sup 18}Ne and {sup 22}Mg have been determined through an R-matrix analysis. New reaction rates of these two (α,p) reactions are recalculated. The astrophysical impact for the {sup 18}Ne(α,p){sup 21}Na reaction has been investigated through one-zone postprocessing X-ray burst calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Formation of Mg{sub 2}Ni with enhanced kinetics: Using MgH{sub 2} instead of Mg as a starting material

At a temperature over the decomposition point (375 Degree-Sign C) of MgH{sub 2}, the formation of Mg{sub 2}Ni is greatly enhanced from the 2MgH{sub 2}+Ni system, as compared to the 2Mg+Ni system. In support of this finding, in-situ observation of X-ray absorption fine structure of the two systems indicates that Mg---Ni bonds form faster in the 2MgH{sub 2}+Ni system than in the 2Mg+Ni system. Furthermore, theoretical modeling also shows that Mg atoms are readily released from MgH{sub 2} using much less energy and thus are more available to react with Ni once the dehydrogenation of MgH{sub 2} occurs, as compared to normal Mg. - Graphical Abstract: The formation of Mg{sub 2}Ni is greatly enhanced by using MgH{sub 2} instead of Mg at a temperature higher than the MgH{sub 2} decomposition point. Highlights: Black-Right-Pointing-Pointer A new and efficient synthesis of Mg-based compounds at a reduced temperature. Black-Right-Pointing-Pointer Mg{sub 2}Ni formation is enhanced by using MgH{sub 2} instead of Mg as a starting material. Black-Right-Pointing-Pointer XAFS results show that Mg---Ni bonds are formed faster in 4MgH{sub 2}+Ni than in 4Mg+Ni. Black-Right-Pointing-Pointer DFT calculations show that Mg atoms are released from MgH{sub 2} more readily than from Mg. Black-Right-Pointing-Pointer Mg formed by MgH{sub 2} dehydrogenation is more available to react with Ni than normal Mg.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures of two novel borate compounds MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8}

Two novel borate compounds MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8}, have been synthesized via solid-state reactions, and their crystal structures have been solved and refined from powder X-ray diffraction data. The compound MgInBO{sub 4}, which was obtained at 1190 °C, belongs to the warwickite family. It crystallizes in the Pnma space group (no. 62) with a=9.5443(1) Å, b=3.2771(1) Å, c=9.5228(1) Å, and Z=4. The fundamental building units are liner –Mg(In)O{sub 6}–[In(Mg)]{sub 2}O{sub 10}–Mg(In)O{sub 6}– chains and isolated BO{sub 3} triangles. The low-temperature phase, MgIn{sub 7/8}B{sub 7/8}O{sub 29/8}, whose crystal structure is solved ab initio by the charge-flipping method with standard chemical formula MgInBO{sub 4}, was prepared at 1080 °C. It crystallizes in the P12{sub 1}/n1 space group (no. 14) with a=17.0976(1) Å, b=3.2504(1) Å, c=5.3387(1) Å, β=96.0829(3)°, and Z=4. The structure of MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} contains [In(2)/Mg(2)]{sub 2}O{sub 10} groups, –MgO{sub 6}–InO{sub 6}– infinite ribbons and isolated BO{sub 3} triangles. The experiments and the differential thermal analysis (DTA) show the decompositions of MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} happen at about 1220 °C and 1180 °C, respectively. The comparative crystal chemistry from MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} to MgInBO{sub 4} has been discussed. Infrared spectra and UV–vis diffuse reflectance spectra of MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} were measured. - Graphical abstract: The structural transformation from the monoclinic MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} (P12{sub 1}/n1) to the orthorhombic MgInBO{sub 4} (Pnma). - Highlights: • Two novel borate compounds MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} have been synthesized via solid-state reactions for the first time. • The crystal structures of MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} have been solved and refined from powder X-ray diffraction data. • The possible crystal chemical analysis from MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} to MgInBO{sub 4} is discussed. • Infrared spectra and UV–vis diffuse reflectance spectra of MgInBO{sub 4} and MgIn{sub 7/8}B{sub 7/8}O{sub 29/8} have been measured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved High-Temperature Aluminum Alloys Containing Cerium

A common rare earth (cerium) when added to aluminum in compositions up to the eutectic compositions of around 10 wt.% improves the high-temperature performance of aluminum alloys. In the early 1980s, some promising research and development efforts focused on powder metallurgy revealed that aluminum alloys containing 4 wt.% cerium exhibit high-temperature mechanical properties exceeding those of the best commercial aluminum casting alloys then in production. Those compositions, which also included high levels of iron, were difficult to process. Recently, magnesium replaces iron to reduce density and improve processing. Cerium oxide is an abundant rare earth oxide that is often discarded during the refining of more valuable rare earths such as Nd and Dy. Therefore, the economics are compelling for cerium as an alloy additive. In this review, we report results obtained during an investigation of the processing and properties of aluminum-cerium alloys produced via casting, extrusion and additive manufacturing. The results show mechanical properties are retained at higher temperatures than other aluminum alloys and show complete recovery of mechanical properties at room temperature when exposed to elevated temperatures as high as 500 °C for 1000 h. Alloys containing cerium also have superior corrosion properties when compared to most aluminum alloys.

36 MATERIALS SCIENCE↗

Crystal structure and ion conductivity of a new mixed-anion phosphate LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}

A new lithium-containing phosphate, LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}, was prepared by a solid-state reaction, and it was characterized by an ab initio structure determination method on the basis of synchrotron powder X-ray diffraction data. LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} was found to be orthorhombic (space group Pnma) with lattice parameters a=9.0387(1) Å, b=10.6072(1) Å, c=8.3065(1) Å, and V=796.39(1) Å{sup 3}. The structure features infinite [Mg{sub 3}O{sub 10}]{sub ∞} layers that are parallel to the bc plane and that are interconnected along the a axis by PO{sub 4} and P{sub 2}O{sub 7} groups. The [Mg{sub 3}O{sub 10}]{sub ∞} layer contains Mg{sub 3}O{sub 14} trimers that are formed by three edge-shared MgO{sub 6} octahedra. The PO{sub 4} and P{sub 2}O{sub 7} groups are located alternatively between [Mg{sub 3}O{sub 10}]{sub ∞} layers. This gives rise to a three-dimensional framework that contains large tunnels along the directions [1 0 0] and [0 1 0]; the Li{sup +} ions are stabilized in these tunnels. AC impedance spectroscopy shows that LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} has an ionic conductivity of 3.40×10{sup −5} S cm{sup −1} at 769 K, with an activation energy of 1.17 eV. - Graphical abstract: Polyhedral view of LiMg3(PO4)P2O7. Li+ ions are represented by orange spheres, MgO6 groups by octahedra, and PO4 groups by tetrahedra. - Highlights: • New compound LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} is reported. • The crystal structure is investigated by synchrotron XRD analysis. • The structure features [Mg{sub 3}O{sub 10}]{sub ∞} layers with interconnecting PO{sub 4} and P{sub 2}O{sub 7} groups. • Correlation between the crystal structure and ionic conductivity is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure X-ray diffraction, Raman, and computational studies of MgCl 2 up to 1 Mbar: Extensive pressure stability of the β-MgCl 2 layered structure

We studied magnesium chloride (MgCl 2 ) with the rhombohedral layered CdCl 2 -type structure (α-MgCl 2 ), experimentally, using synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy using a diamond-anvil cell up to 100 GPa at room temperature and theoretically using first-principles density functional calculations. Our results reveal a pressure-induced second-order structural phase transition to a hexagonal layered CdI 2 -type structure (β-MgCl 2 ) at 0.7 GPa: the stacking sequence of the Cl anions are altered resulting in a reduction of the c-axis length. Theoretical calculations confirm this phase transition sequence and the calculated transition pressure is in excellent agreement with the experiment. Lattice dynamics calculations also reproduce the experimental Raman spectra measured for the ambient and high-pressure phase. According to our experimental results MgCl 2 remains in a 2D layered phase up to 100 GPa and further, the 6-fold coordination of Mg cations is retained. Theoretical calculations of relative enthalpy suggest that this extensive pressure stability is due to a low enthalpy of the layered structure ruling out kinetic barrier effects. Our observation is unusual, as it contradicts with the general structural behavior of highly compressed AB 2 compounds.

36 MATERIALS SCIENCE↗

Identification and characteristics of ZnO/MgO core-shell nanowires

In this paper, ZnO/MgO core-shell nanowires are synthesized based on a one-step chemical vapor deposition (CVD) method. The scanning electron microscopy (SEM) images of core-shell nanowires indicate that Mg addition has little influence on the morphology of the synthesizing products. High crystalline quality ZnO/MgO core-shell nanowires instead of ZnMgO ternary compounds are identified by X-ray diffraction (XRD) patterns, transmission electron microscopy (TEM) images, selected area electron diffraction (SAED) pattern and photoluminescence (PL) spectra. The experimental results show that the ultraviolet (UV) emission of these samples with MgO shell is 12 times higher than that of the corresponding bare ZnO nanowires, and the suppression of the green emission is only 1/45 of the bare ZnO nanowires. It is also found that PL properties are proportional to Mg ratio. The UV emission enhancement and green emission suppression are due to the passivation of surface defects and the improvement of ZnO crystalline quality. The results are very useful for the development of optical devices based on nanowires.

36 MATERIALS SCIENCE↗

TL and PL studies on cubic fluoroperovskite single crystal (KMgF{sub 3}: Eu{sup 2+}, Ce{sup 3+})

The perovskite-like KMgF{sub 3} polycrystalline compounds were synthesized by standard solid state reaction technique. Phase purity of the synthesized compounds was analyzed by powder X-ray diffraction technique. Single crystals of (0.2 mol% of EuF{sub 3} and CeF{sub 3}) Co-doped KMgF{sub 3} have been grown from melt by using a vertical Bridgman-Stockbarger method. Thermoluminescence (TL) characteristics of KMgF{sub 3} samples doped with Eu{sub 2+} and Ce{sub 3+} have been studied after β-ray irradiation. At ambient conditions the photoluminescence spectra consisted of sharp line peaked of Eu{sub 2+} at 360 nm attributed to the f → f transition ({sup 6}P{sub 7/2}→{sup 8}S{sub 7/2}) could only be observed due to the energy transfer from Ce{sub 3+} to Eu{sub 2+}.

36 MATERIALS SCIENCE↗

Effect of Be Modification on the Oxide Bifilms and Tensile Strength Reliability of Al-Si-Mg Alloys Containing Excess Fe

The effect of oxide bifilms and Be modification (0.2 wt pct) on the tensile strength reliability of the as-cast and T{sub 6} heat-treated Al-9Si-0.35Mg-1.5Fe alloy was investigated using Weibull analysis. For this purpose, the density of oxide bifilms in the molten alloy was intentionally increased by surface agitation. According to the results, Be modifies the β-Al{sub 5}FeSi particles to the less harmful α-Fe compounds and substantially decreases the bifilm density in the castings leading to improved tensile properties and higher reliability. Moreover, the beneficial effect of Be was found to be more in the samples containing higher amounts of bifilms. For instance, in the heat-treated condition, Be increased the Weibull modulus of the non-agitated and surface-agitated samples by 4 and 94 pct, respectively. This improvement can be attributed to the strengthening effect of Be on the young surface oxides so that they resist more against rupture when melt is subjected to the surface turbulence. The reduced pressure test and fractography investigations also confirmed the reduction of bifilm density and bifilm-related defects in Be-modified samples.

36 MATERIALS SCIENCE↗

Detailed Investigation of Ion Exchange in Ball Milled LiH+MgB2 System using Ultra-High Field NMR Spectroscopy

The present study with the detailed 1H-6Li cross polarization NMR analysis confirms the formation of a ternary compound, (Mg1-xLi2x)B2, during ball milling of LiH + ½ MgB2 at room temperature. The 6Li sites in (Mg1-xLi2x)B2 exhibit spinning sidebands (SSBs), whereas the 6Li sites in LiH do not. The SSBs and the very short spin-lattice relaxation time manifested by the 6Li sites in (Mg1-xLi2x)B2 indicate that the Li ions in (Mg1-xLi2x)B2 are located between the layered boron structures and close to Mg ions. The formation of (Mg1-xLi2x)B2 explains the previous observation that the LiH + ½ MgB2 mixture ball milled effectively has a greatly enhanced hydriding kinetics at temperatures below the melting point of LiBH4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carboxylic and Dicarboxylic Acids Extracted from Crushed Magnesium Oxide Single Crystals

Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THE) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and (sup 1)H-NMR (Nuclear Magnetic Resonance). The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS (Gas Chromatography - Mass Spectroscopy) analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P2(sub 1)/c with a(sub o) = 5.543 A, b(sub o) = 8.845 A, c(sub o) = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg/g MgO. The MgO crystals from which these organic acids were extracted grew from the 2360 C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H, and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)(sup n-). The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.

Freund, Friedemann↗

Properties of shallow donors in ZnMgO epilayers grown by metal organic chemical vapor deposition

High quality Zn{sub 1−x}Mg{sub x}O epilayers have been grown by means of metal organic chemical vapor deposition technique on top of ZnO templates. The grown samples were investigated by x-ray photoelectron spectroscopy and photoluminescence. The magnesium (Mg) concentration was varied between 0% and 3% in order to study the properties of shallow donors. The free and donor bound excitons could be observed simultaneously in our high quality Zn{sub 1−x}Mg{sub x}O epilayers in the photoluminescence spectra. The results indicate that both built-in strain and Mg-concentration influence the donor exciton binding energy. It clearly shows that the donor exciton binding energy decreases with increasing Mg-concentration and with increasing built-in strain. Furthermore, the results indicate that the donor bound exciton transition energy increases with decreasing strength of the built-in strain if the Mg-concentration is kept the same in the Zn{sub 1−x}Mg{sub x}O epilayers.

36 MATERIALS SCIENCE↗

Workshop on Oxygen in the Terrestrial Planets

This volume contains abstracts that have been accepted for presentation at the Workshop on Oxygen in the Terrestrial Planets, July 20-23,2004, Santa Fe, New Mexico. The contents include: 1) Experimental Constraints on Oxygen and Other Light Element Partitioning During Planetary Core Formation; 2) In Situ Determination of Fe(3+)/SigmaFe of Spinels by Electron Microprobe: An Evaluation of the Flank Method; 3) The Effect of Oxygen Fugacity on Large-Strain Deformation and Recrystallization of Olivine; 4) Plagioclase-Liquid Trace Element Oxygen Barometry and Oxygen Behaviour in Closed and Open System Magmatic Processes; 5) Core Formation in the Earth: Constraints from Ni and Co; 6) Oxygen Isotopic Compositions of the Terrestrial Planets; 7) The Effect of Oxygen Fugacity on Electrical Conduction of Olivine and Implications for Earth s Mantle; 8) Redox Chemical Diffusion in Silicate Melts: The Impact of the Semiconductor Condition; 9) Ultra-High Temperature Effects in Earth s Magma Ocean: Pt and W Partitioning; 10) Terrestrial Oxygen and Hydrogen Isotope Variations: Primordial Values, Systematics, Subsolidus Effects, Planetary Comparisons, and the Role of Water; 11) Redox State of the Moon s Interior; 12) How did the Terrestrial Planets Acquire Their Water?; 13) Molecular Oxygen Mixing Ratio and Its Seasonal Variability in the Martian Atmosphere; 14) Exchange Between the Atmosphere and the Regolith of Mars: Discussion of Oxygen and Sulfur Isotope Evidence; 15) Oxygen and Hydrogen Isotope Systematics of Atmospheric Water Vapor and Meteoric Waters: Evidence from North Texas; 16) Implications of Isotopic and Redox Heterogeneities in Silicate Reservoirs on Mars; 17) Oxygen Isotopic Variation of the Terrestrial Planets; 18) Redox Exchanges in Hydrous Magma; 19) Hydrothermal Systems on Terrestrial Planets: Lessons from Earth; 20) Oxygen in Martian Meteorites: A Review of Results from Mineral Equilibria Oxybarometers; 21) Non-Linear Fractionation of Oxygen Isotopes Implanted in Lunar Metal Grains: Solar, Lunar or Terrestrial Origin? 22) Isotopic Zoning in the Inner Solar System; 23) Redox Conditions on Small Bodies; 24) Determining the Oxygen Fugacity of Lunar Pyroclastic Glasses Using Vanadium Valence - An Update; 25) Mantle Redox Evolution and the Rise of Atmospheric O2; 26) Variation of Kd for Fe-Mg Exchange Between Olivine and Melt for Compositions Ranging from Alkaline Basalt to Rhyolite; 27) Determining the Partial Pressure of Oxygen (PO,) in Solutions on Mars; 28) The Influence of Oxygen Environment on Kinetic Properties of Silicate Rocks and Minerals; 29) Redox Evolution of Magmatic Systems; 30) The Constancy of Upper Mantlefo, Through Time Inferred from V/Sc Ratios in Basalts: Implications for the Rise in Atmospheric 0 2; 31) Nitrogen Solubility in Basaltic Melt. Effects of Oxygen Fugacity, Melt Composition and Gas Speciation; 32) Oxygen Isotope Anomalies in the Atmospheres of Earth and Mars; 33) The Effect of Oxygen Fugacity on Interdiffusion of Iron and Magnesium in Magnesiowiistite 34) The Calibration of the Pyroxene Eu-Oxybarometer for the Martian Meteorites; 35) The Europium Oxybarometer: Power and Pitfalls; 36) Oxygen Fugacity of the Martian Mantle from PigeoniteMelt Partitioning of Samarium, Europium and Gadolinium; 37) Oxidation-Reduction Processes on the Moon: Experimental Verification of Graphite Oxidation in the Apollo 17 Orange Glasses; 38) Oxygen and Core Formation in the Earth; 39) Geologic Record of the Atmospheric Sulfur Chemistry Before the Oxygenation of the Early Earth s Atmosphere; 40) Comparative Planetary Mineralogy: V/(CrCAl) Systematics in Chromite as an Indicator of Relative Oxygen Fugacity; 41) How Well do Sulfur Isotopes Constrain Oxygen Abundance in the Ancient Atmospheres? 42) Experimental Constraints on the Oxygen Isotope (O-18/ O-16) Fractionation in the Ice vapor and Adsorbant vapor Systems of CO2 at Conditions Relevant to the Surface of Mars; 43) Micro-XANES Measurements on Experimental Spinels andhe Oxidation State of Vanadium in Spinel-Melt Pairs; 44) Testing the Magma Ocean Hypothesis Using Metal-Silicate Partitioning of Te, Se and S; 45) Solubility of Oxygen in Liquid Iron at High Pressure and Consequences for the Early Differentiation of Earth and Mars Metallic Liquid Segregation in Planetesimals; 46) Oxygen Fugacity of Lunar Basalts and the Lunar Mantle. Range of fo2 and the Effectiveness of Oxybarometers; 47) Thermodynamic Study of Dissociation Processes of Molecular Oxygen in Vapor over Oxide Compounds; 48) Oxygen Profile of a Thermo-Haliophilic Community in the Badwater Salt Flat; 49) Oxygen Barometry Using Synchrotron MicroXANES of Vanadium; 50) Mass-Independent Isotopic Fractionation of Sulfur from Sulfides in the Huronian Supergroup, Canada; 51) Mass Independent Isotopes and Applications to Planetary Atmospheres; 52) Electrical Conductivity, Oxygen Fugacity, and Mantle Materials; 53) Crustal Evolution and Maturation on Earth: Oxygen Isotope Evidence; 54) The Oxygen Isotope Composition of the Moon: Implications for Planet Formation; 55) Oxygen Isotope Composition of Eucrites and Implications for the Formation of Crust on the HED Parent Body; and 56) The Role of Water in Determining the Oxygen Isotopic Composition of Planets.

Source record↗