Tensile and Compressive Stress-strain Curves and Flat-end Column Strength for Extruded Magnesium Alloy J-1
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Carboxylic and dicarboxylic acids (glycolic, oxalic, malonic and succinic) have been extracted with tetrahydrofuran (THF) and H2O from large synthetic MgO crystals, crushed to a medium fine powder. The extracts were characterized by infrared spectroscopy and 1H-NMR. The THF extracts were derivatized with tert-butyldimethylsilyl (t-BDMS) for GC-MS analysis. A single crystal separated from the extract was used for an x-ray structure analysis, giving the monoclinic unit cell, space group P21/c with ao = 5.543 A, bo = 8.845 A, co = 5.086 A, and beta = 91.9 degrees, consistent with beta-succinic acid, HOOC(CH2)COOH. The amount of extracted acids is estimated to be of the order of 0.1 to 0.5 mg g-1 MgO. The MgO crystals from which these organic acids were extracted grew from the 2860 degrees C hot melt, saturated with CO/CO2 and H2O, thereby incorporating small amounts of the gaseous components to form a solid solution (ss) with MgO. Upon cooling, the ss becomes supersaturated, causing solute carbon and other solute species to segregate not only to the surface but also internally, to dislocations and subgrain boundaries. The organic acids extracted from the MgO crystals after crushing appear to derive from these segregated solutes that formed C-C, C-H and C-O bonds along dislocations and other defects in the MgO structure, leading to entities that can generically be described as (HxCyOz)n-. The processes underlying the formation of these precursors are fundamental in nature and expected to be operational in any minerals, preferentially those with dense structures, that crystallized in H2O-CO2-laden environments. This opens the possibility that common magmatic and metamorphic rocks when weathering at the surface of a tectonically active planet like Earth may be an important source of abiogenically formed complex organic compounds.
In the equilibrium between B-DNA and Z-DNA in poly(dC-dG), the [Co(NH3)6]3+ ion stabilizes the Z form 4 orders of magnitude more effectively than the Mg2+ ion. The structural basis of this difference is revealed in Z-DNA crystal structures of d(CpGpCpGpCpG) stabilized by either Na+/Mg2+ or Na+/Mg2+ plus [Co(NH3)6]3+. The crystals diffract X-rays to high resolution, and the structures were refined at 1.25 A. The [Co(NH3)6]3+ ion forms five hydrogen bonds onto the surface of Z-DNA, bonding to a guanine O6 and N7 as well as to a phosphate group in the ZII conformation. The Mg2+ ion binds through its hydration shell with up to three hydrogen bonds to guanine N7 and O6. Higher charge, specific fitting of more hydrogen bonds, and a more stable complex all contribute to the great effectiveness of [Co(NH3)6]3+ in stabilizing Z-DNA.
This project will be comparing the flammability of select lightweight Mg alloys for use in a simulated ISS environment. It will also be determining the factors that influence flammability of selected alloys in elevated oxygen, including the formation of an oxide layer. The significance of this work is that such alloys can reduce weight saving by up to 30%. This work is adding to knowledge base of lightweight Mg alloys for possible future applications, as no previous flammability testing of Mg alloys have been conducted at elevated oxygen concentrations.
Inelastic neutron scattering spectra of -MgH2 powder have been measured at T = 7 K with an energy resolution better than 1.5% using the time-of-flight direct geometry spectrometer SEQUOIA. Based on these spectra, the density g(E) of phonon states in -MgH2 has been experimentally constructed for the fist time. Comparing the available experimental data on the heat capacity of -MgH2 with those calculated using the obtained g(E) spectrum confirmed the good accuracy of its determination.
The crystal structures of two members of the solid solution series Mg(OH){sub x}Cl{sub y}x+y = 2, Mg(OH){sub 1.7}Cl{sub 0.3} (P{sup {bar 3}}m1, a = 3.169(2) {angstrom}, c = 5.530(12), V = 48.1(1) {angstrom}{sup 3} at T = 365 C) and MgOHCl (R{sup {bar 3}}m, a = 3.3877(4) {angstrom}, c = 17.534(4) {angstrom}, V = 174.27(6) {angstrom}{sup 3} at T = 625 C) were determined from in situ synchrotron powder diffraction data at high temperature upon dehydration of 3Mg(OH){sub 2} {center_dot} MgCl{sub 2} {center_dot} 8H{sub 2}O (F3) and 5Mg(OH){sub 2} {center_dot} MgCl{sub 2} {center_dot} 8H{sub 2}O (F5) phases. The crystal structures of Mg(OH){sub 1.7}Cl{sub 0.3} (example of ss-type-OH) and MgOHCl (example of ss-type-Cl) can be related to the C19 (CdCl{sub 2}) and C6 (CdI{sub 2}) structure type, respectively, with the disordered chloride and hydroxide anions occupying the same crystallographic site in layers.
The goal is to characterize the effect of Al content on AZ31 weld metal, the grain size and strength, and examine role of Al on grain refinement. The approach is to systematically vary the aluminum content of AZ31 weld metal, Measure average grain size in weld metal, and Measure cross-weld tensile properties and hardness. Conclusions are that: (1) increased Al content in AZ31 weld metal results in grain refinement Reason: higher undercooling during solidification; (2) weld metal grain refinement resulted in increased strength & hardness Reason: grain boundary strengthening; and (3) weld metal strength can be raised to wrought base metal levels.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Dolomitized carbonates in the Williston Basin are common below the Middle Devonian Prairie Evaporite Formation, indicating a plausible role for brine-reflux as the source of Mg for dolomitization. However, the Lower Member Winnipegosis Formation, which directly underlies the evaporite sequence, exhibits dolomite 87Sr/86Sr ratios that are higher than expected for Middle Devonian seawater, instead suggesting that the dolomitizing fluids ascended from the deep basin where present-day formation waters are known to be more radiogenic. This interpretation is supported in this study by Mg isotope data showing a basin-scale gradient of increasing d26Mg values from the deep center (–2.03‰) to the edge (–1.34‰) of the Williston Basin along the lower Member Winnipegosis bed. Dolomite favors light isotopes of Mg when it forms, thus driving dolomitizing solutions, and the produced dolomite, towards heavier isotopic compositions in the direction of fluid flow. However, dolomite is also Mg-deficient when it forms, and its initial Mg isotope composition is susceptible to alteration by fluid-rock interactions occurring later in the depositional history of the deposit. We argue that the Mg isotope gradient in the Lower Member Winnipegosis was created by an ascending flow of isotopically light Mg-bearing fluid that differentially altered an earlier formed brine-reflux dolomite, with more alteration occurring deeper in the basin and less towards to edges. Alteration of pre-existing dolomite by an Mg isotope exchange mechanism requires large supplies of Mg. This fact, and the direction of fluid flow point to the underlying crystalline basement as an important Mg source for dolomitization in the Williston Basin. We speculate that ultramafic rocks supplied the Mg when they were hydrothermally altered during an anomalous heating event that affected the Williston Basin in the Late Devonian / Early Carboniferous. Seismic pumping drove these fluids upwards through fracture networks in the crust, and eventually into the deep center of the Williston Basin along vertically-oriented down-to-the-basement faults, pressuring deep aquifers like the Winnipegosis, which resulted in fluids migrating up the stratigraphic dip of the beds towards the edges of the basin. Plotting and contouring the dolomite d26Mg data on a map of the Williston Basin reveals the pathways taken by the migrating fluids. One prominent pathway extending outwards from the center of the basin towards the northeast bears a strong resemblance to petroleum migration fairways deduced for the underlying Late Ordovician Red River Formation. This study demonstrates that Mg isotopic mapping of large dolomite bodies is a useful tool for deciphering fluid flow histories in sedimentary basins and may assist in locating migrated petroleum and Mississippi Valley Type ore deposits.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
One of the current primary concerns within the British nuclear community is the decommissioning of legacy storage ponds in Sellafield Cumbria, where nuclear fuel cladding material (a Mg-Al alloy) resides along with fuel metallic swarf. Corrosion of the immersed metallic elements, which has been occurring over the storage period, has resulted in the formation of what is commonly known as Corroded Magnox Sludge. The behaviour of uranium metal within this particular environment and, more significantly, the identity of the corrosion products that may have formed is currently unknown. The present study attempts to shed some light on these aspects by investigating simplified surrogate systems, mimicking storage ponds. (authors)
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
colloids ? luminescence ? metal oxides ? nanocrystals ? synthesis design