Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Italy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Femtosecond temperature measurements of laser-shocked copper deduced from the intensity of the x-ray thermal diffuse scattering

We present 50-fs, single-shot measurements of the x-ray thermal diffuse scattering (TDS) from copper foils that have been shocked via nanosecond laser ablation up to pressures above ∼135 GPa. We hence deduce the x-ray Debye–Waller factor, providing a temperature measurement. The targets were laser-shocked with the DiPOLE 100-X laser at the High Energy Density endstation of the European X-ray Free-Electron Laser. Single x-ray pulses, with a photon energy of 18 keV, were scattered from the samples and recorded on Varex detectors. Despite the targets being highly textured (as evinced by large variations in the elastic scattering) and with such texture changing upon compression, the absolute intensity of the azimuthally averaged inelastic TDS between the Bragg peaks is largely insensitive to these changes, and allowing for both Compton scattering and the low-level scattering from a sacrificial ablator layer provides a reliable measurement of $T/Θ^2_D$, where Θ D is the Debye temperature. We compare our results with the predictions of the SESAME 3336 and LEOS 290 equations of state for copper and find good agreement within experimental errors. We, thus, demonstrate that single-shot temperature measurements of dynamically compressed materials can be made via thermal diffuse scattering of XFEL radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance of an X-γ ray detection system based on a thick silicon LGAD

We present the performance of a X-γ ray detection systems based on a 300 µm thick silicon low-gain avalanche diode (LGAD) and of an equivalent Diode structure without the gain layer, read-out by a custom-made low-noise charge amplifier. For the LGAD structure, the multiplication gains M s from 10.2 to 19.3 are measured, and the Equivalent Noise Charge (ENC) components have been studied in detail. As expected, a significant reduction of the white and 1/f voltage series and dielectric ENC components is observed with increasing gain, shortening the optimum peaking time to τ = 0.4÷8 μs depending on the gain value, with respect to the standard diode, while the parallel ENC component increases proportionally to the gain up to M s = 15. Setting the gain M s = 12.7, a minimum ENC = 34.5 electrons r.m.s. (298 eV FWHM) at τ = 1 μs is found. However, the electronic noise, evaluated on the pulser FWHM, is found to only marginally contribute to the width of the spectral lines of a radioactive source, which are dominated instead by the statistical noise of the charge multiplication within the LGAD structure. The spectral lines' excess width is found to be proportional to the signal multiplication gain M s and increases with the energy of the photons. A minimum line width of 850 eV FWHM at 13.9 keV is measured at room temperature, τ = 2 μs and a gain M s = 10.2.

47 OTHER INSTRUMENTATION↗

Backward-Angle Electroproduction of η′ Mesons off Protons at W = 2.13 GeV and Q 2 = 0.46 (GeV/ c ) 2

The electroproduction of $\eta ^{\prime }$ mesons from a $\mathrm{^{1}H}$ target at $W=\mathrm{2.13~GeV}$, $Q^{2} = 0.46~\left( \mathrm{GeV/}c\right)^{2}$, and $\cos \theta ^{\mathrm{CM}}_{\gamma ^{*}\eta ^{\prime }} \approx -1$ has been experimentally measured. The differential cross section of virtual photoproduction has been obtained as $4.4 \pm 0.8 ~\left( \mathrm{stat.} \right) \pm 0.4 ~\left( \mathrm{sys.} \right)~ \mathrm{nb/sr}$ in the One-Photon-Exchange Approximation. This value is one-sixth of that of real photoproduction at backward angles. A comparison with newly developed isobar model calculations not only shows the validity of the theoretical framewark employed, but also imposes new constraints on coupling strength between the $\eta ^{\prime }p$ final state and nucleon resonances.

Nuclear Physics↗

Selective electron-phonon coupling strength from nonequilibrium optical spectroscopy: The case of MgB 2

The coupling between quasiparticles and bosonic excitations rules the energy transfer pathways in condensed matter systems. The possibility of inferring the strength of specific coupling channels from their characteristic timescales measured in nonequilibrium experiments is still an open question. Here, in this study, we investigate MgB 2 , in which conventional superconductivity at temperatures as high as 39 K is mediated by the strong coupling between the conduction electrons and the 𝐸 2⁢𝑔 phonon mode. By means of broadband time-resolved optical spectroscopy, we show that this selective electron-phonon coupling dictates the nonequilibrium optical response of MgB 2 at early times (<100 fs) after photoexcitation. Furthermore, based on an effective temperature model analysis, we estimate its contribution to the total electron-boson coupling function extracted from complementary equilibrium spectroscopy approaches, namely, optical reflectivity and angle-resolved photoemission spectroscopy. The coupling strength with the 𝐸 2⁢𝑔 phonon modes is thus estimated to be 𝜆 ≃ 0.56, which is approximately half of the total coupling constant, in agreement with 𝑎𝑏 initio calculations from the literature. As a benchmark, broadband time-resolved optical spectroscopy is performed also on the isostructural and nonsuperconducting compound AlB 2 , showing that the nonequilibrium optical response relaxes on a slower timescale due to the lack of strongly coupled phonon modes. Our findings demonstrate the possibility to resolve and quantify selective electron-phonon coupling from nonequilibrium optical spectroscopy.

Mor, Selene [Università Cattolica del Sacro Cuore,↗

High magnetic field response of superconductivity dome in quantum artificial high−⁢𝑇 𝐶 superlattices with variable geometry

It is known that cuprate artificial high-𝑇 𝐶 superlattices (AHTS) with period 𝑑, composed of quantum wells confining interface space charge in stoichiometric Mott insulator layers (𝑆), with thickness 𝐿, at the interface with overdoped normal metallic cuprate layers (𝑁) show a superconducting dome by tuning the geometric 𝐿 over 𝑑 ratio of the SNSN superlattice with the top predicted by quantum material design engineering quantum size effects. Here we report high-field magnetotransport measurements up to 41 Tesla of AHTS across the entire superconducting dome. The results show the universal upward-concave behavior of the temperature-dependent upper critical magnetic field in low-𝑇 𝐶 samples at the rising edge and drop edge of the dome, providing strong evidence consistent with two-band superconductivity in agreement with multigap theory used for quantum design of the SNSN superlattices. The measured superconducting coherence length demonstrates that atomic-scale engineering controls not only the critical temperature but also the intrinsic pair size at Fano-Feshbach resonances physics paving the way toward next-generation quantum devices and shedding light on unconventional superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental entropic uncertainty relations in dimensions three to five

We provide experimental validation of tight entropic uncertainty relations for the Shannon entropies of observables with mutually unbiased eigenstates in high dimensions. In particular, we address the cases of dimensions 𝑑 = 3, 4, and 5 and consider from 2 to 𝑑 + 1 mutually unbiased bases. The experiment is based on pulsed frequency bins measured with a multioutput quantum pulse gate, which can perform projective measurements on a complete high-dimensional basis in the time-frequency domain. Our results fit the theoretical predictions: the bound on the sum of the entropies is never violated and is saturated by the states that minimize the uncertainty relations.

Serino, Laura [Paderborn University (Germany)] (OR↗

Probing axionlike particles with multimessenger observations of neutron star mergers

Axion-like particles (ALPs) can be copiously produced in binary neutron star (BNS) mergers through nucleon-nucleon bremsstrahlung if the ALP-nucleon couplings 𝑔 𝑎⁢𝑁 are sizable. The ALP-photon coupling 𝑔 𝑎⁢𝛾 may trigger conversions of ultralight ALPs into photons in the magnetic fields of the merger remnant and of the Milky Way. This effect would lead to a potentially observable short gamma-ray signal, in coincidence with the gravitational-wave signal produced during the merging process. This event could be detected through multimessenger observation of BNS mergers employing the synergy between gravitational-wave detectors and gamma-ray telescopes. Here, we study the sensitivity of current and proposed MeV gamma-ray experiments to detect such a signal. As an explicit example, we consider ALP couplings related as in the Kim-Shifman-Vainshtein-Zakharov axion model, and show that in this case the proposed instruments can reach a sensitivity down to 𝑔 𝑎⁢𝛾 ≳ few ×10 −13 GeV −1 for 𝑚 𝑎 ≲ 10 −9 eV, comparable with the SN 1987A limit.

Axion-like particles↗

General relativistic hydrodynamic simulations of binary strange star mergers

We perform fully general-relativistic simulations of binary strange star mergers considering two different approaches for thermal effects. The first uses a cold equation of state (EOS) derived from a modified version of the MIT bag model which is then supplemented by a Γ-law correction. The second approach employs a microphysical description of the finite-temperature effects. We describe results obtained with the two treatments, highlighting the influence of thermal effects. We find that the postmerger dynamics differs significantly in the two cases, leading to quantitative differences in the postmerger gravitational-wave spectrum and ejecta mass. The peak frequency of the postmerger gravitational-wave emission is consistent with the established quasi-universal relations for binary neutron star mergers and as a result, our simulations cannot distinguish between mergers of neutron stars and those of strange stars. Our models with realistic treatment of finite-temperature effects produce a significant amount of ejecta ≳0.02 M ⊙ ​. Here, the resulting flux of strangelets near the Earth, computed assuming that all neutron star mergers are in fact strange-stars mergers and that the binary considered here is representative, is in tension with experimental upper limits. As such, our results tentatively disfavor a scenario in which strange-quark matter is the lowest energy state of matter.

79 ASTRONOMY AND ASTROPHYSICS↗

Dimorphos’s Material Properties and Estimates of Crater Size from the DART Impact

On 2022 September 26, the Double Asteroid Redirection Test (DART) spacecraft intentionally collided with Dimorphos, the moon of the binary asteroid system 65803 Didymos. This collision provided the first full-scale test of a kinetic impactor for planetary defense. Images from DART’s DRACO camera revealed Dimorphos to be an oblate spheroid covered in boulders of varying sizes and shapes. Very little was known about Dimorphos prior to DART’s impact, including its shape, structure, and material properties. Approach observations and those following the DART impact have provided crucial knowledge that narrows the parameter space relevant to modeling the impact into Dimorphos. Here we present the results of a suite of hydrocode simulations of the DART impact on Dimorphos. Despite remaining uncertainties, initial models of DART’s kinetic impact provide important information about the results of DART (e.g., potential crater size and morphology, ejecta mass) and the properties of Dimorphos. Simulations here suggest that Dimorphos has near-surface strength ranging from a few Pascals to tens of kPa, which corresponds to crater sizes of ~40–60 m. Simulated crater sizes provide a crucial comparison metric for the European Space Agency Hera mission when it arrives at the Didymos system. Hera’s measurement of crater size in combination with measurement of Dimorphos’s mass will allow us to assess our simulations and provide the information needed to make the DART impact experiment both the first test of a planetary defense mitigation mission and the first full-scale planetary defense simulation validation exercise.

36 MATERIALS SCIENCE↗

Anisotropic structure in a vapor-deposited Pd-based metallic glass

The understanding of the structure of amorphous solids beyond nearest-neighbors has long been sought after. While recent works have demonstrated evidence for medium-range ordering and its importance for the physical properties of glassy systems, few have investigated mesoscopic structural correlations beyond a few nanometers. In this work, combining X-ray nano-diffraction with high-energy X-ray total scattering with a small focus, we have not only found structural anisotropy in a vapor-deposited Pd 77.5 Cu 6 Si 16.5 metallic glass sample which appears to show two distinct and well-defined structures in different directions, but also obtained detailed characterizations of this anisotropic structure in real space. Upon annealing, the sample loses the long-range anisotropy, and at the same time, it appears to densify with a contraction of higher-order coordination shells. In light of recent works, our results may indicate a transition between two structures in the sample with different densities, medium-range ordering, and degrees of anisotropy. We expect these results to be relevant to a larger family of metallic glass systems, where similar discoveries may be made with the use of high-quality, small-focus X-ray beams.

36 MATERIALS SCIENCE↗

Isospin symmetry holds beyond the proton drip line: First observation of excited states in 55Cu

Isospin symmetry, combined with shell-model description, has long been successful in reproducing nuclear structure and predicting mirror energy differences. However, these descriptions have been primarily limited to mirror nuclei with well-bound ground states. As one approaches the proton drip line, coupling to the continuum becomes important. Despite this, little is known about medium-mass nuclei at the drip line. Here we report the measurement of the excitation energies of several unbound states in a nucleus beyond the proton drip line, 55Cu, performed via γ-ray spectroscopy at the Radioactive Isotope Beam Factory (RIKEN). Several low-lying yrast states are observed to decay predominantly by γ-ray emission. In contrast, the state–predicted to be strongly populated in the one-proton knockout reaction–is notably absent, suggesting that it decays primarily via prompt proton emission. We show that even for such an unbound system, shell-model calculations based on a harmonic oscillator potential reproduce the observed mirror energy differences remarkably well in all the observed states. Based on this result, we propose that a general pattern might emerge where, in medium-mass systems at the proton drip line, the stronger Coulomb barrier together with the centrifugal barrier effectively confines the wave functions, so that the shell model is able to describe low-lying states, enabling accurate predictions of mirror energy differences between isobaric analogue states.

Pigliapoco, S [Dipartimento di Fisica e Astronomia↗

Hierarchical low Pt-loading “core-shell” electrocatalysts for the oxygen reduction reaction in fuel cells

The sluggish kinetics of the oxygen reduction reaction (ORR) hinder cost-effective polymer electrolyte fuel cells (PEFCs), which rely on scarce, expensive platinum-based electrocatalysts (ECs). Here, we present a novel synthesis method for ORR ECs achieving exceptional platinum utilization. The design features a hierarchical “multi-carbon” support comprising carbon nanoparticles interacting with graphene nanoplatelets as the “core”, encapsulated by a porous carbon nitride (CN) “shell”. This configuration promotes strong core/shell interactions and a bimodal active site distribution, consisting of chemically dispersed Pt and Ni single-atom complexes and PtNix alloy nanoclusters embedded in the CN shell. These advantages enable high activity and durability, achieving an ORR activity of 1.6 A mgPt−1 at 0.9 V vs. RHE-an order of magnitude higher than Pt/C (0.17 A mgPt−1). A proof-of-concept PEFC demonstrates a specific power of 12.0 kW gPt−1 at 0.60 V. This approach offers a significant step toward more efficient and sustainable PEFC technologies.

Pagot, Gioele [University of Padova, Italy]↗

Second-order wave excitation forces in WEC-Sim/MOST: Implementation, experimental validation, and code-to-code comparison

Accurate prediction of second-order hydrodynamic loads is essential for floating bodies, including floating offshore wind turbines, wave energy converters, and hybrid wind–wave platforms. These nonlinear effects, arising from both sum- and difference-frequency forcing, are critical for capturing key response characteristics but remain challenging to model efficiently. In this work, we extend the open-source Wave Energy Converter Simulator / MATLAB for Offshore Simulation Tool by implementing second-order wave excitation forces, supporting both the full Quadratic Transfer Function formulation and the Newman approximation. The full Quadratic Transfer Function method is used for all code-to-code comparisons and experimental validation, while the Newman approximation is provided as a computationally lighter alternative. To benchmark the new capability, we perform a code-to-code comparison with OpenFAST and OrcaFlex. We then validate the enhanced model using wave-tank measurements of a 1:96 scale DeepCwind semi-submersible, showing that second-order effects are required to reproduce platform motions. The implementation employs a computationally efficient pre-computation strategy for second-order wave excitation forces, reducing simulation cost while maintaining engineering accuracy. Overall, this work advances the tool as an open-source and versatile tool for modelling floating offshore renewable-energy systems requiring second-order hydrodynamic fidelity.

17 WIND ENERGY↗

A New Nitrogen-Rich Energetic Material with So Many Tautomers

A new nitrogen-rich triazolo-triazole compound, (3-(6-methyl-1H-[1,2,4]triazolo[4,3-b][1,2,4]triazol-3-yl)-1H-1,2,4-triazol-5-amine), TTT1, has been prepared, and its acid–base and tautomeric behavior has been investigated. In the pH range of 0.3–12, TTT1 can accept up to two protons, forming a monocation and a dication, and can deliver one proton, forming a monoanion. The tautomeric behavior is particularly rich for the monocation, for which computational analysis predicts four different tautomers in a narrow energy range of 2 kcal/mol. Two of these tautomers (2H-7H-8H and 3H-7H-8H) have been isolated in salts of the monocation with suitable counterions (chloride, bromide, perchlorate). Surprisingly, the most stable predicted tautomer, 1H-3H-7H, has not been found in the four crystallized salts of the monocation. The energetic perchlorate salt of the monocation (3H-7H-8H tautomer) shows good thermal stability and good stability to impact, friction, and electric discharge. The packing of this compound shows the formation of H-bonded dimers with interactions between N8–H···N1. The crystal structure of this energetic salt was studied experimentally up to 2.8 GPa; no phase change or decomposition was observed.

Chemical structure↗

Diabatization with Electrostatic Embedding for Studying Photophysics in Organic Molecular Crystals

Highly emissive organic molecular crystals find applications in several areas, such as organic electronics, solar cells, and sensors. Understanding the excited-state mechanisms underlying these applications is essential for optimizing and controlling them effectively. Exciton models coupled with nonadiabatic dynamics, particularly quantum dynamics, provide crucial insights into photochemical and photophysical processes in molecular crystals. Nevertheless, there remains a lack of general tools and automated workflows to facilitate such simulations. In this paper, we present a computational strategy to investigate the photoactivated dynamics of organic molecular crystals, bridging methodologies traditionally used for molecular systems and materials science, with a particular focus on the interplay between local excitations and charge transfer (CT) processes. We have implemented an interface between the fromage and Overdia programs, enabling the construction of vibronic Hamiltonians for molecular crystals within an excited-state ONIOM(QM:QM′) framework, incorporating long-range electrostatics through a RESP-based Ewald summation. Fragment-based diabatization provides a route to quantum dynamics simulations in weak-to-intermediate coupling regimes. The method was applied to the photophysics of dibenzo[g,p]chrysene (DBC) crystals using time-dependent DFT. The fromage/ Overdia interface was employed to compute the couplings of local excitations and CT states for 18 unique DBC dimers in the crystal and to quantify the influence of electrostatic embedding, which was found to be modest (10−20%). Simulations on π-stacked dimers reproduced the small red shift observed experimentally from solution to crystal, attributed to electronic interactions among fixed monomers rather than crystal electrostatics. Quantum dynamics simulations revealed ultrafast population transfer from bright local excitations to CT states. This approach establishes a robust framework linking molecular and solid-state excited-state dynamics, with potential applications for studying excitations, defects, and impurities in molecular crystals.

Crystals↗

Oxidation of Silicon Carbide with Atomic Oxygen through the Passive-to-Active Transition

The inelastic and reactive scattering dynamics of O( 3 P) atoms on a 6H-silicon carbide (SiC) surface were investigated as a function of temperature with a molecular beam-surface scattering technique that employed a rotatable mass spectrometer detector. One set of experiments used a pulsed hyperthermal beam that produced ~8 km s –1 O atoms, and another set of experiments used a continuous beam that contained O atoms with a nominal velocity of ~2 km s –1 . When exposed to the relatively low-flux, pulsed hyperthermal O-atom beam, a passive oxide layer on the SiC that formed at lower temperatures decomposed as the temperature increased above 1673 K. Instead of entering an active oxidation regime, a graphitic layer formed on the surface and largely protected the underlying SiC from incoming O atoms. Investigation of the oxide decomposition without O-atom bombardment revealed volatile Si and SiO products at the moment that the oxide decomposed, implying that Si sublimation occurs concurrently with oxide decomposition. In the experiment with the continuous (higher flux) O-atom beam, volatile SiO and CO products were observed after the passive oxide decomposed, indicating that active oxidation was reached. Finally, the results of this study provide evidence for the importance of Si sublimation within the active oxidation regime. Above the passive-to-active transition temperature, Si sublimation is an ongoing process, and continuous active oxidation will only occur if sufficient oxygen reacts with the surface to produce SiO more quickly than a graphitic layer can form. Thus, accurate models of SiC ablation by atomic oxygen must account for multiple competing mechanisms that depend on the surface temperature and incident O-atom flux.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aggregation Dynamics of Colloidal Particles in Tin Perovskite Crystalline Film Formation

We present an approach to understanding the crystallization of tin-based perovskite films for photovoltaic applications, starting from precursor suspensions processed via spin-coating. By integrating colloidal theory with the fluid dynamics of suspensions, this approach elucidates the influence of both chemical variables and process parameters on the crystallization pathways of perovskite suspensions and the resulting microstructural features of the solid films. Specifically, the incorporation of SnCl 2 as an additive was found to accelerate crystallization, whereas tBP induces a slowdown of the process leading, however, to a marked improvement in film uniformity and microstructural quality.

Crystallization↗

Photocatalytic Semiconductor–Metal Hybrid Nanoparticles: Single-Atom Catalyst Regime Surpasses Metal Tips

Semiconductor–metal hybrid nanoparticles (HNPs) are promising materials for photocatalytic applications, such as water splitting for green hydrogen generation. While most studies have focused on Cd containing HNPs, the realization of actual applications will require environmentally compatible systems. Using heavy-metal free ZnSe-Au HNPs as a model, we investigate the dependence of their functionality and efficiency on the cocatalyst metal domain characteristics ranging from the single-atom catalyst (SAC) regime to metal-tipped systems. The SAC regime was achieved via the deposition of individual atomic cocatalysts on the semiconductor nanocrystals in solution. Utilizing a combination of electron microscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy, we established the presence of single Au atoms on the ZnSe nanorod surface. Upon increased Au concentration, this transitions to metal tip growth. Photocatalytic hydrogen generation measurements reveal a strong dependence on the cocatalyst loading with a sharp response maximum in the SAC regime. Ultrafast dynamics studies show similar electron decay kinetics for the pristine ZnSe nanorods and the ZnSe-Au HNPs in either SAC or tipped systems. This indicates that electron transfer is not the rate-limiting step for the photocatalytic process. Combined with the structural-chemical characterization, we conclude that the enhanced photocatalytic activity is due to the higher reactivity of the single-atom sites. This holistic view establishes the significance of SAC-HNPs, setting the stage for designing efficient and sustainable heavy-metal-free photocatalyst nanoparticles for numerous applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗