Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Indexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Modeling multiple scattering transient of an ultrashort laser pulse by spherical particles

The multiple scattering of an ultrashort laser pulse by a turbid dispersive medium (namely a cloud of bubbles in water) is investigated by means of Monte Carlo simulations. The theory of Gouesbet and Gréhan (2000) is used to derive an energetic model of the scattering transient. It is shown that the spreading and extinction of the pulse can be decoupled from the transient of scattering, which allows to describe each phenomenon individually. The transient of scattering is modeled with the Lorenz-Mie Theory and thus is also valid for a relative refractive index lower than one, contrary to the Debye series expansion which does not converge close to the critical angle. This is made possible after the introduction of a new physical object, the Scattering Impulse Response Function (SIRF) which allows to detect the different modes of scattering transient, in time and direction. Here the present approach is more generic, as it enables to simulate clouds of air bubbles in water, which was not possible previously. Two different approaches are proposed within the Monte Carlo framework. The first is a pure Monte Carlo approach where the delay due to the scattering is randomly drawn at each event, while the second is based on the transport of the whole scattering signal. They are both embedded in the Monte Carlo code Scatter3D. Both models produce equivalent trends and are validated against published numerical results. They are then applied to the multiple scattering of ultra short pulse by a cloud of bubble in water in the forward direction. The pulse spread due to the propagation in water is computed for a wide range of traveled distances and pulse durations, and the optimal pulse duration is given to minimize the pulse spread at a given distance. The main result is that the scattered photons exit the turbid medium earlier than the ballistic photons and produce a double peak related to the refraction in the bubble. This demonstrates the possibility to develop new diagnostics to characterize dynamic bubbly flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Robust verification of stochastic simulation codes

We introduce a robust verification tool for computational codes, which we call Stochastic Robust Extrapolation based Error Quantification (StREEQ). Unlike the prevalent Grid Convergence Index (GCI) [1] method, our approach is suitable for both stochastic and deterministic computational codes and is generalizable to any number of discretization variables. Building on ideas introduced in the Robust Verification [2] approach, we estimate the converged solution and orders of convergence with uncertainty using multiple fits of a discretization error model. In contrast to Robust Verification, we perform these fits to many bootstrap samples yielding a larger set of predictions with smoother statistics. Here, bootstrap resampling is performed on the lack-of-fit errors for deterministic code responses, and directly on the noisy data set for stochastic responses. This approach lends a degree of robustness to the overall results, capable of yielding precise verification results for sufficiently resolved data sets, and appropriately expanding the uncertainty when the data set does not support a precise result. For stochastic responses, a credibility assessment is also performed to give the analyst an indication of the trustworthiness of the results. Furthermore, this approach is suitable for both code and solution verification, and is particularly useful for solution verification of high-consequence simulations..

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

An efficient explicit implementation of a near-optimal quantum algorithm for simulating linear dissipative differential equations

We propose an efficient block-encoding technique for the implementation of the Linear Combination of Hamiltonian Simulations (LCHS) for simulating dissipative initial-value problems. This algorithm approximates a target nonunitary operator as a weighted sum of Hamiltonian evolutions, thereby emulating a dissipative problem by mixing various time scales. We introduce an efficient encoding of the LCHS into a quantum circuit based on a simple coordinate transformation that turns the dependence on the summation index into a trigonometric function. Classically, this method is equivalent to the use of a highly accurate Fejér-Clenshaw-Curtis quadrature formula. Quantumly, this significantly simplifies block-encoding of a dissipative problem and allows one to perform an exponential number of Hamiltonian simulations by a single Quantum Signal Processing (QSP) circuit. The resulting LCHS circuit has high success probability and the selector scales logarithmically with the number of terms in the LCHS sum and linearly with time. Careful analysis of error convergence proves that this method is more efficient than other LCHS circuits that have recently appeared in the literature. We verify the quantum circuit and its scaling by simulating it on a digital emulator of fault-tolerant quantum computers and, as a test problem, solve the advection-diffusion equation. The proposed algorithm can be used for simulating a wide class of nonunitary initial-value problems including the Liouville equation with added dissipation and linear embeddings of nonlinear systems, such as the Koopman-von Neumann and Carleman embeddings.

Novikau, I [Lawrence Livermore National Laboratory↗
DOE OSTI2025

Enhanced grindability of bastnaesite ore by ex-situ CO 2 treatment under the partial pressure of 0-100 psi

High grinding energy consumption has long constrained the sustainable development of mineral processing. This study introduces an innovative technology that employs ex-situ CO 2 treatment to enhance the grindability of bastnaesite ore. The grinding aid effect was evaluated under CO 2 partial pressures ranging from 0 psi to 100 psi using particle size distribution and the Bond work index (BWI), while the underlying mechanism was elucidated with various characterization techniques including inductively coupled plasma (ICP), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The optimal grinding aid effect was achieved at 100 psi partial pressure, 50% slurry concentration, and 3 h reaction duration. Correspondingly, the P80 of the grinding product decreased from 81.76 μm to 72.73 μm and the BWI of bastnaesite ore decreased from 6.96 kW·h/t to 6.30 kW·h/t, a reduction of 9.48%. The grinding aid effect primarily resulted from the transformation of sparingly soluble carbonates like calcite and dolomite into more soluble bicarbonates, which created substantial cracks and pores, thereby reducing the ore's hardness and improving its grindability. By significantly saving grinding energy consumption while delivering environmental benefits, this technology exhibits great promise for further optimization and widespread adoption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synergistic cellulase–xylanase formulations for enhanced dewatering and fiber bonding toward energy-efficient and sustainable paper and packaging production

A mechanistic understanding of the synergistic effects of enzymes on cellulosic fibers dewatering and fiber bonding is essential for advancing energy-efficiency and lightweight production of paper and packaging materials. This study investigates the impact of varying cellulase and xylanase formulations on equilibrium moisture content (EMC) after pressing and tensile strength of cellulosic fiber webs using a factorial experimental design. Nine custom enzyme formulations were evaluated at controlled dosages ranging from ∼20 to 76 FPU/mL cellulase and ∼500–1130 IU/mL xylanase. Response surface modeling revealed a significant synergy, particularly at 20–40 FPU/mL cellulase combined with ≥ 1000 IU/mL xylanase. Under these conditions, EMC decreased by up to 3.6% compared with the untreated refined control, while tensile index gains of up to 16% were statistically significant for optimized blends (p < 0.05). The interaction between cellulase and xylanase was also significant for the tensile response (p = 0.010). Protein efficiency analysis showed that optimized formulations containing 30–40% less protein outperformed the commercial benchmark. The nonlinear synergy between cellulase and xylanase is attributed to their complementary substrate specificities. Endoglucanase- and β‑glucosidase‑rich cellulases hydrolyze internal β‑1,4‑glycosidic bonds in amorphous cellulose, loosening fiber walls and increasing flexibility, while xylanases target hemicellulose, primarily xylan-rich domains, enhancing porosity and improve cellulase accessibility. Tailoring enzyme formulations at low loadings overcomes traditional trade-offs between strength and dewatering, enabling cost-effective, energy-efficient, low-carbon solutions for sustainable packaging and hygiene products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tunable broadband luminescence in lead-free hybrid copper halides

Metal halides are an important class of optoelectronic materials combining exceptional optical and electronic properties. An inherent advantage of metal halides is their solution synthesis and processability, which render them as low-cost and environmentally friendly materials for a range of applications from photovoltaics and photodetection to solid-state lighting (SSL). Here, in this study, we synthesized three previously unreported lead-free organic–inorganic hybrid copper halides: (OA) 4 CuX 5 (X = Br, I; OA + = C 8 H 17 NH 3+ , n-octylammonium cation) and (HA) 2 CuI 3 (HA + = C 6 H 13 NH 3 + , n-hexylammonium cation), all of which exhibit broadband emissions arising from self-trapped excitons (STEs). Among these compounds, (OA) 4 CuI 5 demonstrates tunable dual-band white-light emission with a high color rendering index value of 91 at room temperature. Temperature-dependent photoluminescence measurements and first-principles calculations reveal distinct behaviors between the two emission states in (OA) 4 CuI 5 . These findings highlight the potential of copper halide compounds for optoelectronic applications, particularly in the development of environmentally friendly solid-state lighting technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The correlation between N deficiency and the mechanical properties of the Ti 2 AlNy MAX phase

The role of X deficiency on the mechanical properties of MAX phases was studied by synthesizing Ti 2 AlN through powder metallurgy in stoichiometric and sub/extra-stoichiometric nitrogen compositions. XRD analyses and ab initio calculations indicate that nitrogen vacancies result in a lattice contraction predominantly along the c-axis. The elastic moduli and intrinsic hardness of substoichiometric Ti 2 AlN 0.9 measured from nanoindentation tests are shown to be slightly smaller than that of Ti 2 AlN. The key mechanical indexes, bulk (B), shear (G) and Young’s (E) moduli as well as the hardness variation are calculated in density functional theory, and show different responses depending on the concentration of N vacancies. Overall, this joint experimental and theoretical study provides a full understanding of the energetics, chemical bonding, electronic structure, and mechanics of the N deficient MAX phases which would increase the application of nitride ceramics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Properties and Autoignition Reactivity of Diesel Boiling Range Ethers Produced from Guerbet Alcohols

We examine the properties of diesel boiling range ethers made from coupling of alcohols produced by oligomerization of ethanol (Guerbet alcohols) for their utility as low-carbon liquid fuel blendstocks. Basic properties of boiling point, flash point, freezing point, density and viscosity are well suited for blending into diesel fuels. For the mixture of ethers the lightest component, di-n-butyl ether, can be present at up to 20 vol% while still having adequately high flashpoint for safe handling. Soot formation tendency (as yield sooting index) is well below that of conventional diesel. The ethers have similar compatibility with elastomers as conventional diesel, based on Hansen solubility parameter analysis. Oxidation stability was assessed for 30 vol% blends of individual ethers in a conventional diesel fuel using a long-term storage test. Over 6 weeks we observed no formation of peroxides or degradation. n-alkyl ethers with carbon number of 8 or higher have cetane number over 100, which is outside the defined range of cetane number, while branched ethers are over 70. The ethers also blend antagonistically into conventional diesel for cetane number, meaning that the blend cetane value is lower than predicted based on a linear by volume, mass, or mole model. We show that aromatics and naphthenes likely act as radical scavengers to slow or shut down autoignition of the highly reactive ethers at low to medium blend levels. Overall, diesel boiling range ethers show significant promise as high quality low-net carbon diesel blendstocks.

09 BIOMASS FUELS↗
DOE OSTI2021

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage

We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multiscale petrophysical characterization and flow unit classification of the Minnelusa eolian sandstones

Integration of petrophysical and geological information is critical to simulation of subsurface carbon storage (GCS). In this sense, two depositional facies were identified from the core description and well-log interpretation, namely massive (MS) and cross-bedded (CB) facies groups. Additionally, pore-scale characteristics were studied by a combination of techniques, e.g. Nuclear Magnetic Resonance (NMR) and mercury intrusion capillary pressure (MICP). Scanning electron microscope (SEM) and petrographic analyses show that the pore structure is dominantly controlled by the depositional environment and dolomite cementation. NMR-T 2 distributions of MS and CB facies show triple and quadruple modes, respectively. In addition, MICP of high- and low-permeability MS facies samples, and their CB facies group mixtures were collected. The MS sample pore-throat size distribution is uni-modal, while the triple-modal characteristic of the mixtures indicates heterogeneous pore structures at the sub-core scale for CB facies. The reliably estimates of porosity and permeability for both facies groups via NMR techniques and the MLR (Multiple Linear Regression) approach demonstrate the applicability of these techniques to eolian sandstone. Moreover, irreducible water saturation via the T 2 -cutoff method correlates strongly with T 2LM instead of porosity. Finally, the rock quality index and flow zone indicator were calculated based on Combinable Magnetic Resonance (CMR) log interpretations. This provides direct connection to properties measured in the well. Four flow units were classified for both facies groups. Finally, results show that better reservoir quality with significant heterogeneities is observed in the CB facies. This study highlights the importance integrating multiscale petrophysical properties including facies, pore architecture and diagenesis analysis with core- to log-scale property characterization. The results herein validate our reservoir characterization and flow unit classification in eolian reservoirs.

58 GEOSCIENCES↗
DOE OSTI2025

Forecasting Multi-Step-Ahead Street-Scale Nuisance Flooding using a seq2seq LSTM Surrogate Model for Real-Time Application in a Coastal-Urban City

In coastal-urban cities facing an elevated risk of nuisance flooding (by rain and tide) due to increased heavy rainfall, sea level rise, urbanization, and aging drainage systems, real-time flood forecasting at the street-scale can provide useful information to transportation decision-makers. Physics-Based Models (PBMs) that offer high accuracy come with high computational runtimes and costs that limit their application for real-time flood forecasting. To address this challenge, Machine Learning (ML) surrogate models trained from PBMs have been proposed to provide street-scale flood forecasts. Previous related studies have focused on using Long Short-Term Memory (LSTM) architectures to model hourly flood depth on streets. While LSTM models can capture input sequences effectively, they fall short in accurately preserving output sequences, limiting their suitability for multi-step-ahead forecasts. The seq2seq LSTM architecture offers a key advantage here by capturing the full sequence of input–output, making it potentially more suitable for multi-step-ahead flood forecasts compared to traditional LSTM models. However, seq2seq LSTM has not been tested for street-scale flood forecasting, particularly for rapidly fluctuating nuisance flooding events which require special attention to its temporal sequences. Hence, in this study, we applied the seq2seq LSTM model to explore multi-step-ahead street-scale nuisance flooding and compared its results to the traditional LSTM model as a benchmark model. LSTM and seq2seq LSTM surrogate models were applied to 22 flood-prone streets in Norfolk, Virginia, as a case study with a 4-hr (short-term) and 8-hr (long-term) lead time. The models were trained with environmental (rainfall and tide) and topographic (elevation, Topographic Wetness Index, and Depth-To-Water) features along with PBM-derived water depths for different storm events. The results demonstrated satisfactory performance of both LSTM and seq2seq LSTM surrogate models throughout the forecast period compared to the PBM. However, the seq2seq LSTM showed lower Mean Absolute Error (MAE)/ Root Mean Square Error (RMSE) and higher Nash–Sutcliffe Efficiency (NSE)/ correlation than the LSTM across most lead times, particularly for long-term forecasting due to its supremacy in handling both input–output sequences together, which is missing in the traditional LSTM. For example, in the long-term, the average RMSE ranges were 0.0268–0.0373 m for LSTM and 0.0226–0.0319 m for seq2seq LSTM, while in the short-term, they were 0.0263–0.0293 m and 0.0261–0.0283 m, respectively. Additionally, while both models exhibited similar performance in distinguishing flooded and non-flooded streets for flood depth ≥ 0.1 m, the seq2seq LSTM model demonstrated superior performance for higher flood depths (such as ≥ 0.2 m and ≥ 0.3 m). Once trained, inference took only 0.09 to 0.11 s (short-term) and 0.30 to 0.35 s (long-term) per storm event for the 22 streets, making the application highly suitable for real-time decision-making during nuisance flood events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A hybrid Penman-Monteith and machine learning model for simulating evapotranspiration and its components

Integrating physical processes with machine learning has advanced evapotranspiration (ET) simulation, yet most hybrid models fail to partition total ET into its components: soil evaporation (E) and vegetation transpiration (T). This study introduces Residual Neural Network–Penman–Monteith (RNN-PM), a novel hybrid dual-source ET model designed to overcome this limitation. The model synergizes the physically-based Penman–Monteith framework with three specialized residual neural networks trained to estimate key conductance parameters (canopy conductance, soil surface conductance, and aerodynamic conductance). Furthermore this explicit parameterization allows for the direct partitioning of total ET. Validation at National Ecological Observatory Network (NEON) flux sites using high-frequency partitioned E and T shows that RNN-PM reliably reproduces ET and the transpiration fraction (T/ET). For ET, the model achieves an average Kling–Gupta efficiency (KGE) of 0.89 and a root-mean-square error (RMSE) of 0.55 mm/day; for T/ET, the KGE is 0.87 with an RMSE of 0.06. Furthermore, RNN-PM demonstrates robust generalization, accurately simulating ET and its components well beyond the initial training dataset, even under extreme climatic conditions. This study extended the analysis by comparing the RNN-PM model with seven established dual-source ET models. The results indicate that RNN-PM outperforms both conventional machine learning models and purely physical process-based models in simulating ET components in most cases. Among the purely physical process-based dual-source models, those based on surface temperature decomposition showed improved performance as the leaf area index (LAI) decreased when evaluated against high-frequency ET component datasets. In contrast, the performance of conductance-based dual-source models declined with decreasing LAI. Although purely machine learning-based models can produce relatively accurate simulations of ET components, they often exhibit limited generalization capability, an issue that the RNN-PM model effectively overcomes. Ultimately, the RNN-PM model represents a significant advance in simulating ET components, offering a novel and scalable approach for improving the representation of land–atmosphere interactions in Earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impact of lead on an axisymmetric, single bead blown powder DED overhung geometry

Metal additive manufacturing can be utilized for the near net-shape manufacture of components in a layer wise technique. Traditionally, the buildup process is conducted in the direction of gravity or bottom to top in the vertical orientation; however, with the availability of commercial systems with additive heads or fixturing that can index from vertical, and the need to manufacture larger parts without modifying available systems, the limitation of manufacturing from bottom to top is removed enabling the buildup of larger components printed at an angle from vertical. The effect of gravity on the melt pool and as-deposited component quality when printing off vertical is unknown in literature, especially for axisymmetric components. This understanding is critical for the advancement of manufacturing components of increased size in 4 and 5-axis additive systems. This investigation utilizes blown powder directed energy deposition to evaluate the change in as-printed geometry when the start point is altered in relation to gravity while the part rotates to manufacture an axisymmetric component. The objectives of this work are to determine the impact of the deposition location on the geometric variability on axisymmetric components. This investigation tests the hypothesis that differences in layer height exist due to a change in catchment efficiency when the deposition location is moved to a tangent of the round geometry due to a change in the melt pool dynamics. It was found the ideal deposition location when printing at 26.6-degrees from vertical was at −90-degrees from the top center point of the component, along the tangent, where gravity was pushing the melt pool down, but the rotation of the part was pulling the deposited material towards the top center of the component. This work provides an understanding of layer height stability and catchment efficiency to guide print orientation strategy for high-aspect ratio components. It was found the −90-degree lead deposition had the best layer height stability at 0.6 % as compared to the top-center at 6.3 % and +90-degree deposition location at 9.2 % for the nominal programmed layer height. The change in layer height also effected the final diameter the greatest for the top center deposition location where the diameter diverged by 2.5 % during the overbuild condition and converged by 0.6 %. In conclusion, this finding will increase the manufacturing efficiency of axisymmetric components by increasing the passive stability of the printing process for the successful manufacture of parts without the need for perfectly calibrated manufacturing parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of shielding gas and spot reduction on humping suppression in high-speed laser welding

High-speed laser welding is a crucial process to enhance the production rate of fuel cell fabrication. However, exceeding a critical welding speed leads to defect formation such as humps and root concavities, which degrade weld quality and mechanical performance. This study employed shielding gas and spot reduction approaches to suppress these defects. The relationships between individual defect types and their influence on weld strength were systematically examined. Moreover, in situ high-speed synchrotron X-ray imaging was employed to comprehend the mechanisms of humping mitigation by shielding gas through analysis of instantaneous keyhole and melt pool dynamics. The observations reveal that shielding gas mitigates humping by shortening the molten pool through enhanced surface heat convection and by altering surface tension to prevent melt flow collisions. The effects of shielding gas and spot reduction were further incorporated into the dimensionless humping index (π h ) that describes the humping formation tendency. These findings provide mechanistic insights and quantitative guidance for defect control strategies in high-speed laser welding.

08 HYDROGEN↗
DOE OSTI2021

Electronic, magnetic, and optical properties of bulk and (1 1 1)-surfaces of CoMnZnSi quaternary Heusler alloy

The structural stability, electronic structure, and magnetic and optical properties of CoMnZnSi quaternary Heusler alloy (QHA) in the bulk and (1 1 1)-slab forms have been investigated by performing density functional theory (DFT) calculations. Formation and cohesive energies, and elastic constants confirm that the bulk CoMnZnSi is chemically and mechanically stable at an equilibrium lattice parameter of 5.81 Å. The calculated elastic constants also indicate that this QHA has ductile and anisotropic features. We investigate and discuss the bonding behavior from charge density distribution and density of states. Furthermore, these calculations in the bulk phase show a perfect half-metallic behavior with an integer value of magnetic moment (4 µB) and a large spin-flip gap of 0.39 eV. On the other hand, the Co (1 1 1) and Si (1 1 1)-slabs exhibit semi-metallic nature at the Fermi level. These results indicate that CoMnZnSi qualifies for spintronic applications. In the bulk and Co (1 1 1), Zn (1 1 1), and Si (1 1 1)-surfaces, the magnetic moment of Co and Mn atoms are ferromagnetically aligned, while the ferrimagnetic alignment of Co with Mn has been found in Mn (1 1 1)-surface. We also investigate the optimal conductivity, dielectric functions, reflectivity, absorption coefficient, refractive index, and loss function to understand the underlying optical properties of this alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Lattice strains and diffraction elastic constants of cubic polycrystals

In situ synchrotron X-ray and neutron diffraction experiments provide a powerful approach to measure lattice strains in bulk polycrystalline materials. They are being increasingly used for quantitative characterization of microscale deformation within and between grains and phases. Here we use a self-consistent micromechanics model to obtain a general analytic solution of the grain-level lattice strains and diffraction elastic constants for a broad class of elastically isotropic polycrystals with cubic crystal symmetry. This analytic solution reveals a direct linear relationship between the reciprocal of the elastic diffraction constant and the orientation index parameter along the direction of any diffraction vector, including tensile loading and transverse directions. The straightforward numerical implementation of this solution provides diffraction elastic constants for 26 representative cubic polycrystals. Finally, analytic solutions of this kind can serve to benchmark in situ diffraction measurements of lattice strains and also facilitate high-throughput studies of microscale stresses and diffraction elastic constants in polycrystalline materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Towards green synthesis of Mn 4+ -doped fluoride phosphors: a review

Mn 4+ -doped fluoride phosphors are attractive for application in white solid-state lighting devices because their distinct red emission can improve the color rendering index, while the earth-abundance of Mn 4+ ions can reduce the production cost. However, highly hazardous HF is used as the fluoride source in the synthesis processes, which requires extreme caution. In this review, we introduce various methods for synthesizing Mn 4+ -doped fluoride phosphors, categorized according to the presence or absence of HF in the synthesis. The underlying optical properties of the phosphors fabricated using the various methods are discussed. In addition, in the discussion of each method, we emphasize on the key factors and strategies for developing phosphors. Finally, this review highlights perspectives on and future directions for the safe synthesis of Mn 4+ -doped fluoride phosphors to achieve solid-state lighting devices with superior optical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anomalously strong viscosity behavior in mixed oxy-sulfide Na 4 P 2 S 7-x O x invert glasses

In this paper, the first observations have been made of anomalously strong viscosity behavior and correspondingly strong bulk glass formation and resistance to crystallization in a melt quenched (MQ) prepared series of invert, modifier content greater than the glass former content, mixed oxy-sulfide Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 5, (NaPSO) glasses. We find that these glasses even with 67 mole % modifier, Na 2 S, and only 33 mole% glass former P 2 S 5-x O x , exhibit a calorimetric fragility index, m cal , as small as 29 compared to typical values of ~ 60 to 80 for alkali silicate glasses with > 50 mole% SiO 2 and the theoretical minimum m cal of ~ 15. The m cal values were converted to kinetic viscosity fragility, m vis , values and used with the measured glass transition temperatures, T g s, to produce viscosity curves for the glasses using the Mauro-Yue-Ellison-Gupta-Allan (MYEGA) model. The viscosity of the glass with a minimum m cal value of x = 2.5 was then shown to exhibit a viscosity that was as strong as, and for some compositions stronger than, the viscosity of alkali aluminosilicate glasses which have three dimensional network structures compared to the one dimensional chain structures observed in these MOS invert glasses. Consistent with these small values of fragility indices and therefore predicted higher viscosity above the glass transition temperature, T g , in the supercooled liquid regime, these glasses are also particularly resistant to crystallization. For example, the x = 2.5 glass composition exhibits a crystallization temperature, T C , more than 150K above its T g . We find that the calorimetric fragility of these glasses varies systematically with the extent of network forming bridging oxygens (BOs) in the glasses. The structural change caused by incrementally replacing sulfur with oxygen has been found to have consistent, large effects on the thermal properties.

36 MATERIALS SCIENCE↗