Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Iron K photons from weakly magnetized neutron stars in X-ray binaries

The emission of iron K photons by the continuum X-ray source and the neutron star surface is considered. It is shown that the continuum sources of X-ray binaries produce negligible amounts of iron K photons because nearly all iron atoms in the continuum source are fully stripped due to the intense X-ray fluxes. In contrast, the atmosphere of the neutron star in an X-ray binary might be an important source of iron K photons (photon energy about 6.5 keV) because it is bombarded by a large number of hard X-rays capable of photo-ejecting K-shell electrons from iron atoms. Information is discussed concerning the magnetic field strength, the gravitational potential at the neutron star surface, and the direction of the magnetic dipole axis which are obtainable from the observations of K photons of the neutron star atmosphere.

Bai, T.↗

Friction and wear of iron and nickel in sodium hydroxide solutions

A loaded spherical aluminum oxider rider was made to slide, while in various solutions, on a flat iron or nickel surface reciprocate a distance of 1 cm. Time of experiments was 1 hr during which the rider passed over the rider passed over the center section of the track 540 times. Coefficients of friction were measured throughout the experiments. Wear was measured by scanning the track with a profilometer. Analysis of some of the wear tracks included use of the SEM (scanning electron microscrope) and XPS (X-ray photoelectron spectroscopy). Investigated were the effect of various concentractions of NaOH and of water. On iron, increasing NaOH concentration above 0.01 N caused the friction and wear to decrease. This decrease is accompanied by a decrease in surface concentration of ferric oxide (Fe2O3) while more complex iron-oxygen compounds, not clearly identified, also form. At low concentrations of NaOH, such as 0.01 N, where the friction is high, the wear track is badely torn up and the surface is broken. At high concentration, such as 10 N, where the friction is low, the wear track is smooth. The general conclusion is that NaOH forms a protective, low friction film on iron which is destroyed by wear at low concentrations but remains intact at high concentrations of NaOH. Nickel behaves differently than iron in that only a little NaOH gives a low coefficient of friction and a surface which, although roughened in the wear track, remains intact.

Rengstorff, G. W. P.↗

Friction and wear of iron and nickel in sodium hydroxide solutions

A loaded spherical aluminum oxider rider was made to slide, while in various solutions, on a flat iron or nickel surface reciprocate a distance of 1 cm. Time of experiments was 1 hr during which the rider passed over the center section of the track 540 times. Coeficients of friction were measured throughout the experiments. Wear was measured by scanning the track with a profilometer. Analysis of some of the wear tracks included use of the SEM (scanning electron microscope) and XPS (X-ray photoelectron spectroscopy). Investigated were the effect of various concentrations of NaOH and of water. On iron, increasing NaOH concentration above 0.01 N caused the friction and wear to decrease. This decrease is accompanied by a decrease in surface concentration of ferric oxide (Fe2O3) while more complex iron-oxygen compounds, not clearly identified, also form. At low concentrations of NaOH, such as 0.01 N, where the friction is high, the wear track is badly torn up and the surface is broken. At high concentration, such as 10 N, where the friction is low, the wear track is smooth. The general conclusion is that NaOH forms a protective, low friction film on iron which is destroyed by wear at low concentrations but remains intact at high conentrations of NaOH. Nickel behaves differently than iron in that only a little NaOH gives a low coefficient of friction and a surface which, although roughened in the wear track, remains intact. Previously announced in STAR as N83-10171

Rengstorff, G. P.↗

Oxygen isotope relationships in iron meteorites

Iron meteorites with oxygen-bearing phases can be classified in terms of their oxygen isotopic abundances. These iron meteorite classes are isotopically similar to various stony meteorite classes, which may indicate a common origin. The group IAB and IIICD irons may be related to the winonaites; group IIE irons may be related to H chondrites; group IVA irons may be related to L or LL chondrites.

Clayton, R. N.↗

Apollo 14 very low titanium glasses - Melting experiments in iron-platinum alloy capsules

This paper describes two techniques that have been developed to produce Fe-Pt alloy capsules for hgh-pressure experiments, and reports liquidus-phase relations of the Apollo 14 very low titanium glasses determined using Fe-rich capsules (a/Fe/ approximately 0.6). The liquid is multiply saturated with olivine and clinopyroxene at equal to or greater than 22 kbar. The multiple saturation is at least 3 kbar higher than that determined using pure Fe capsules and corresponds to a source region at least 60 km deeper if olivine and clinopyroxene were the residual phases. However, independent data on iron activity or oxygen fugacity of the glasses are still needed in order to choose a container of optimum composition. Preliminary experiments in Fe-poor alloy capsules suggest that the valence state of iron and the crystallization sequence in the melt have changed, possibly as a result of oxidizing materials entrapped during the iron-plating processes. The FeO content of the charge decreases linearly with increasing run duration in experiments using pure Fe capsules. The observation that iron-rich globules grow with time suggests that the equilibrium Fe (bleb) + Fe2O3 (liq) = 3 FeO (liq) might be established in the liquid at high pressure. If this explanation is correct, an appreciable amount of 'FeO' in the liquid could actually be Fe2O3, and some natural lunar volcanic glasses may contain ferric iron as well.

Chen, H.-K.↗

The feasibility of low-G grey solidification of nodular iron in the F-104 experimental furnace package

The rationale for low-g experiments with cast iron and the need for solidification in the grey form during these experiments are reviewed. The factors which determine whether an iron melt will solidify grey or white are discussed. Cooling rate versus microstructure was studied for a nodular iron candidate material for F-104 low-g solidification. The study determined that low-g grey solidification, using the present F-104 furnace system, of the nodular iron composition studied is not feasible. Specimen microstructure strongly suggested that the F-104 furnace's gas cooling system was causing excessive localized chill resulting in the nucleation of the unwanted iron carbide phase. A change is suggested, in the quench system design, that could possibly overcome this problem.

Curreri, P. A.↗

Microanalysis of dissolved iron and phosphate in pore waters of hypersaline sediment

Diurnal fluctuations of reduced iron concentrations, expected to occur in reduced sediments in the photic zone, were studied. Iron concentration was compared to O2-H2S, a microcanalysis of sulfate reduction was performed, as well as an examination of diurnal concentration of dissolved phosphate and changes in interstitial CO2. The iron profiles suggest a strong correlation between iron remobilization and processes occurring in the light. Phosphate profiles suggest the removal of phosphate is strongly correlated with precipitation of oxidized iron in the upper 2 mm to 5 mm of the sediments. Pore water CO2 concentrations and carbon isotope ratios are presented. These data are from the analyses of minisediment cores collected from the 42 per mil salt pond and incubated in the laboratory under light and dark conditions.

Haddad, R.↗

Graphite Formation in Cast Iron

In the first phase of the project it was proven that by changing the ratio between the thermal gradient and the growth rate for commercial cast iron samples solidifying in a Bridgman type furnace, it is possible to produce all types of graphite structures, from flake to spheroidal, and all types of matrices, from ferritic to white at a certain given level of cerium. KC-135 flight experiments have shown that in a low-gravity environment, no flotation occurs even in spheroidal graphite cast irons with carbon equivalent as high as 5%, while extensive graphite flotation occurred in both flake and spheroidal graphite cast irons, in high carbon samples solidified in a high gravity environment. This opens the way for production of iron-carbon composite materials, with high carbon content (e.g., 10%) in a low gravity environment. By using KC-135 flights, the influence of some basic elements on the solidification of cast iron will be studied. The mechanism of flake to spheroidal graphite transition will be studied, by using quenching experiments at both low and one gravity for different G/R ratios.

Stefanescu, D. M.↗

A model for the biological precipitation of Precambrian iron-formation

A biological model for the precipitation of Precambrian iron formations is presented. Assuming an oxygen deficient atmosphere and water column to allow sufficient Fe solubility, it is proposed that local oxidizing environments, produced biologically, led to precipitation of iron formations. It is further suggested that spheroidal structures about 30 mm in diameter, which are widespread in low grade cherty rion formations, are relict forms of the organic walled microfossil Eosphaera tylerii. The presence of these structures suggests that the organism may have had a siliceous test, which allowed sufficient rigidity for accumulation and preservation. The model involves precipitation of ferric hydrates by oxidation of iron in the photic zone by a variety of photosynthetic organisms. Silica may have formed in the frustules of silica secreting organisms, including Eosphaera tylerii. Iron formates formed, therefore, by a sediment rain of biologically produced ferric hydrates and silica and other organic material. Siderite and hematite formed diagenetically on basin floors, and subsequent metamorphism produced magnetite and iron silicates.

Laberge, G. L.↗

A nonmagmatic origin of group-IIE iron meteorites

New neutron activation data on 10 elements in 12 IIE and IIE-related irons lead to a reclassification of several irons. Seymchan and Lonaconing are removed from IIE, and Leshan added. Four IIE members are designated IIE-An to call attention to some anomalous properties. The eight normal IIE members define element-Ni trends generally similar to those in the nonmagmatic group IAB; the small negative slopes on W-Ni and Ir-Ni diagrams are strongly indicative of a nonmagmatic origin of the IIE irons. It is proposed that IIE irons like IAB irons originated as individual pools of impact-produced melt in the near-surface region of a chondritic parent body. The positive As-Ni and Au-Ni trends are the only evidence suggesting fractional crystallization, but their slopes are lower than those in magmatic group IIIAB, and only slightly higher than those of Cu and Sb in IAB. It is suggested that the S and C contents of the IIE precursor materials were much lower than those of the IAB precursors, thus higher temperatures were required to generate enough metallic melt to segregate into pools. These higher temperatures are also reflected in the nonchondritic compositions of the silicate inclusions.

Wasson, J. T.↗

Studies of implanted iron in silicon by channeling and Rutherford backscattering

Different amounts of 100-keV iron ions have been implanted into high-resistivity p-type FZ-silicon samples. The implantation damage, recovery of damage during various annealing periods and temperatures, movement of iron atoms under annealing and oxidation, and the kinds of defects created after implantation, annealing, or oxidation are all investigated by channeling and backscattering measurements. It is found that the critical fluence of 100-keV iron implanted into silicon at room temperature is about 2.5 x 10 to the 14th Fe/sq cm, and that iron atoms are gettered by silicon oxidation. In this supersaturated region, iron atoms diffuse slightly towards bulk silicon during high-temperature annealing (greater than or equal to 1100 C) but not at all during low-temperature annealing (less than or equal to 1000 C) in dry nitrogen ambient.

Wang, P. W.↗

Ungrouped iron meteorites in Antarctica - Origin of anomalously high abundance

Eighty-five percent of the iron meteorites collected outside Antarctica are assigned to 13 compositionally and structurally defined groups; the remaining 15 percent are ungrouped. Of the 31 iron meteorites recovered from Antarctica, 39 percent are ungrouped. This major difference in the two sets is almost certainly not a stochastic variation, a latitudinal effect, or an effect associated with differences in terrestrial ages. It seems to be related to the median mass of Antarctic irons, which is about 1/100 that of non-Antarctic irons. During impacts on asteroids, smaller fragments tend to be ejected into space at higher velocities than larger fragments, and, on average, small meteoroids have undergone more changes in orbital velocity than large ones. As a result, the set of asteroids that contributes small meteoroids to earth-crossing orbits is larger than the set that contributes large meteoroids. Most small iron meteorites may escape from the asteroid belt as a result of impact-induced changes in velocity that reduce their perihelia to values less than the aphelion of Mars.

Wasson, John T.↗

Iron Moessbauer spectroscopy: Superparamagnetism in hydrothermal vents and the search for evidence of past life on Mars

In view of the demonstrated value of Iron Moessbauer Spectroscopy (FeMS) in the study of extraterrestrial iron and the fact that, after silicon and oxygen, iron is the most abundant element on the surface of Mars, we proposed, and have under development, a backscatter Moessbauer spectrometer with x ray fluorescence capability (BaMS/XRF) for use on Mars as a geophysical prospecting instrument. Specifically, we have proposed BaMS/XRF as part of the geochemistry instrumentation on NASA's Mars Environment Survey (MESUR) mission. BaMS/XRF will have applications in: (1) the study of past environments through the examination of sedimentary material; (2) the study of the contemporary Martian environment; and (3) the study of iron-containing minerals of possible biogenic origin. Development of a reference library from a geophysical point of view for putative Martian surface materials at appropriate temperatures is now underway. We carried out preliminary optical reflectance and FeMS measurements on mineral products (iron oxyhydroxides) of deep-sea hydrothermal activity. Various aspects of this investigation are presented.

Agresti, David G.↗

Reflectance spectroscopy and GEX simulation of palagonite and iron-rich montmorillonite clay mixtures: Implications for the surface composition of Mars

Because of the power of remote sensing reflectance spectroscopy in determining mineralogy, it has been used as the major method of identifying a possible mineral analogue of the martian surface. A summary of proposed martian surface compositions from reflectance spectroscopy before 1979 was presented by Singer et al. Since that time, iron-rich montmorillonite clay, nanocrystalline or nanophase hematite, and palagonite have been suggested as Mars soil analogue materials. Palagonite in petrological terms is best described as an amorphous, hydrated, ferric iron, silica gel. Montmorillonite is a member of the smectite clay group, and its structure is characterized by an octahedral sheet in coordination with two tetrahedral sheets in which oxygen atoms are shared. The crystal unity of montmorillonite is well defined in contrast to palagonite where it is considered amorphous or poorly crystalline at best. Because of the absence of the diagnostic strong 2.2-micron reflectance band characteristic of clays in the near-infrared (NIR) spectrum of Mars and palagonite and based upon a consideration of wide wavelength coverage (0.3-50 microns), Roush et al. concluded that palagonite is a more likely Mars surface analogue. In spite of the spectral agreement of palagonite and the Mars reflectance spectrum in the 2.2-micron region, palagonite shows poor correspondence with the results of the Viking LR experiment. In contrast, iron-rich montmorillonite clays show relatively good agreement with the results of the Viking LR experiment. This spectral study was undertaken to evaluate the spectral properties of mixtures of palagonite and Mars analogue iron-rich montmorillonite clay (16-18 wt. percent Fe as Fe2O3) as a Mars surface mineralogical model. Mixtures of minerals as Mars surface analogue materials have been studied before, but the mixtures were restricted to crystalline clays and iron oxides.

Orenberg, J. B.↗

Iron and nickel isotopic mass fractionation in deep-sea spherules

Magnetite-wuestite spherules collected from deep-sea sediments are thought to have originally been Fe-Ni metal particles at the top of the atmosphere that were oxidized and melted during entry into the earth's atmosphere. Some likely sources for the metal particles are Fe-Ni interplanetary dust particles (IDP's) and metal or sulfide from stony IDP's that separated after melting. Davis et al. reported that four of these spherules are enriched in the heavy isotopes of iron, with enrichments of 8-23%/amu. We have developed a technique for analysis of both iron and nickel isotopes on the same ion microprobe spot and have applied this technique to a number of deep-sea spherules in order to better understand the processes leading to isotopic mass fractionation. Eight spherules show iron and nickel isotopic mass fractionation, with iron and nickel enriched in the heavy isotopes by 10-19%/amu and 4-32%/amu, respectively. If the mass fractionations are due to Rayleigh fractionation during evaporation, these spherules lost 76-94% of their original mass. We have analyzed the four magnetite-wuestite spherules for which iron isotopic data were reported by Davis et al. as well as four new spherules.

Davis, Andrew M.↗

An iridium-rich iron micrometeorite with silicate inclusions from the Moon

We have found a 0.1 mg iron micrometeorite containing meteoritic silicate inclusions in an agglutinate from 2-2.5 cm deep in regolith core 60014. The metal is 93 percent iron, 6.5 percent nickel, 0.5 percent cobalt, approximately 150 ppm iridium, and less than 2 ppm gold. Although the Ir concentration is higher than that reported previously for any iron meteorite group, it lies on the extrapolation to low Ni and high Ir concentrations of several meteorite groups on Ni,Ir plots (groups 2C,D,E, and 3AB,E,F). Tiny, subrounded silicate inclusions comprise low-Ca pyroxene (En83), olivine (FO80), and albitic and potassic feldspars, as mixtures of minerals or glasses. Minor phases include oldhamite (CaS) and, tentatively, hercynite (FeAl2O4). The inclusions have pyroxene FeO/MnO of approximately 25 and olivine FeO/MnO of 40-60. In comparison with known iron meteorites, the inclusions are most similar to those in type 2E, e.g., Weekeroo Station, Colomera, and Kodaikanal. As far as we know, this is the first observation of an iron meteorite with silicate inclusions from a lunar sample. No metal fragments with meteoritic, nonmetallic inclusions were reported in several previous, exhaustive studies of soil particles.

Jolliff, Bradley L.↗

Kinetic Studies of Iron Deposition in Horse Spleen Ferritin Using H2O2 and O2 as Oxidants

The reaction of horse spleen ferritin (HoSF) with Fe(2+) at pH 6.5 and 7.5 using O2, H2O2 and 1:1 a mixture of both showed that the iron deposition reaction using H2O2 is approx. 20- to 50-fold faster than the reaction with O2 alone. When H2O2 was added during the iron deposition reaction initiated with O2 as oxidant, Fe(2+) was preferentially oxidized by H2O2, consistent with the above kinetic measurements. Both the O2 and H202 reactions were well defined from 15 to 40 C from which activation parameters were determined. The iron deposition reaction was also studied using O2 as oxidant in the presence and absence of catalase using both stopped-flow and pumped-flow measurements. The presence of catalase decreased the rate of iron deposition by approx. 1.5-fold, and gave slightly smaller absorbance changes than in its absence. From the rate constants for the O2 (0.044 per second) and H2O2 (0.67 per second) iron-deposition reactions at pH 7.5, simulations of steady-state H2O2 concentrations were computed to be 0.45 micromolar. This low value and reported Fe2(+)/O2 values of 2.0-2.5 are consistent with H2O2 rapidly reacting by an alternate but unidentified pathway involving a system component such as the protein shell or the mineral core as previously postulated.

Lowery, Thomas J., Jr.↗

Considerations on Terrestrial Iron Depositing Analogs to Earliest Mars

Iron oxide and hydroxide minerals, including hematite, can mineralize and preservemicrofossils and physical biomarkers (Allen at al., 2004). Preserved remnants of phototrophic microorganisms are recognized as biosignatures of past life on Earth (Schopf, 2006). To date, two types of surface iron depositing environments have been studied as analogs to possible habitable environments on earliest Mars: the highly acidified Rio Tinto River (Iberian Belt, Spain) [Gomez Ortis et al., 2007], and the nearneutral iron depositing Chocolate Pots Hot Spring (Yellowstone National Park, US) [Parenteau at al., 2005]. While phototrophs in the Rio Tinto are only represented by eukaryotic algae (Amaral Zettler et all., 2002), Chocolate Pots is mainly populated with cyanobacteria (Pierson et all., 2000; Brown et all., 2007). Which of these environments is the closer analog to a potentially habitable early Mars? Paleobiological data, combined with recent "tree of life" interpretations, suggest that phototrophic eukaryotes evolved not earlier than 2.5 - 2.8 b.y. after Earth s accretion (4.6 b.y.), while cyanobacteria and /or their iron-tolerant predecessors evolved between 1 - 1.5 b.y. after accretion (Brown et al., 2007). Lindsay and Brasier (2002) postulated that microbial life on Mars surface could have lasted no more than 1-1.5 b.y. after Mars accretion (also 4.6 b.y.). Recent multispectral mapping of Mars suggests that near-neutral wet environments prevailed at approximately this time (Bibring, et al., 2006). Thus, near-neutral iron depositing hot springs such as Chocolate Pots Hot Spring seem to be the more likely habitable analogs for earliest Mars.

Brown, Igor I.↗