Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

First Calorimetric Energy Reconstruction of Beam Events with ARAPUCA Light Detector in ProtoDUNE-SP

ProtoDUNE Single Phase at CERN is the large scale prototype for the far detector of the future DUNE experiment. ProtoDUNE is in stable operation since Oct. 2018 at the CERN Neutrino Platform. Test beam data in the energy range of sub-GeV to a few GeV were collected in fall 2018 providing a set of key measurements. Particles (electrons, protons, pions, muons and kaons) are identified combining information from a set of beam-line detectors (Time of Flight, Cherenkov) and TPC reconstruction. Three different technologies are implemented in the protoDUNE photon detector system (PDS). Results from the ARAPUCA response, one of the PDS components, are presented providing first calorimetric energy measurements and particle ID of beam events from LAr scintillation light signals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Signal processing to reduce dark noise impact in precision timing

We introduce a technique to mitigate the effects of low frequency noise on precision timing. The example of Dark Count Noise Rate (DCR) in Silicon Photomultipliers (SiPMs) is emphasized. This technique exploits the correlation between time shifts on the leading edge of a signal and the residual slope of the baseline (due to noise) which remains after baseline subtraction. In fast timing applications (such as for Time-of-flight particle ID) the signal arrival time is typically captured on the signal leading edge. The signal risetime is often fixed by the physics of the sensor and input circuit. Then accurate pulse timing can be achieved by correcting a leading edge threshold time (depending on a slope proportional to both the Amplitude and the risetime) to a “constant fraction” time. This compensation for time walk due to amplitude fluctuations breaks down once we introduce interference from low frequency noise on the leading edge. In this paper we demonstrate that an additional measurement of the slope at threshold can be used to correct for this noise jitter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quality concerns caused by quality control — deformation of silicon strip detector modules in thermal cycling tests

The ATLAS experiment at the Large Hadron Collider (LHC) is currently preparing to replace its present Inner Detector (ID) with the upgraded, all-silicon Inner Tracker (ITk) for its High-Luminosity upgrade (HL-LHC). The ITk will consist of a central pixel tracker and the outer strip tracker, consisting of about 19,000 strip detector modules. Each strip module is assembled from up to two sensors, and up to five flexes (depending on its geometry) in a series of gluing, wirebonding and quality control steps. During detector operation, modules will be cooled down to temperatures of about -35 °C (corresponding to the temperature of the support structures on which they will be mounted) after being initially assembled and stored at room temperature. In order to ensure compatibility with the detector's operating temperature range, modules are subjected to thermal cycling as part of their quality control process. Ten cycles between -35 °C and +40 °C are performed for each module, with full electrical characterisation tests at each high and low temperature point. As part of an investigation into the stress experienced by modules during cooling, it was observed that modules generally showed a change in module shape before and after thermal cycling. This paper presents a summary of the discovery and understanding of the observed changes, connecting them with excess module stress, as well as the resulting modifications to the module thermal cycling procedure.

47 OTHER INSTRUMENTATION↗

Testing the limits of ITkPixV2: the ATLAS inner tracker pixel detector readout chip

The ITkPixV2 chip is the final production readout chip for the ATLAS Phase 2 Inner Tracker (ITk) upgrade at the upcoming High-Luminosity LHC (HL-LHC). Due to the extraordinarily high peak luminosity at the HL-LHC of 5 × 1034 cm-1 s-1, ITkPixV2 must meet significant increases in nearly all design requirements compared to the current ATLAS Inner Detector (ID), including a 10× increase in trigger rate, a 7.5× increase in hit rate, a 3× increase in radiation tolerance, and a 12.5× decrease in pixel current draw per unit area, all while maintaining a similar power per unit area as present pixel detectors. Here we present the first measurements of the ITkPixV2 chip operated at the limits of the full chip design requirements, including in particular a measurement of the activity-induced current of the chip as a function of increasing hit rate.

Le Pottier, L↗

Measured gain suppression in FBK LGADs with different active thicknesses

In recent years, the gain suppression mechanism has been studied for large localized charge deposits in Low-Gain Avalanche Detectors (LGADs). LGADs are a thin silicon detector with a highly doped gain layer that provides moderate internal signal amplification. Using the CENPA Tandem accelerator at the University of Washington, the response of LGADs with different thicknesses to MeV-range energy deposits from a proton beam were studied. Three LGAD prototypes of 50 μm, 100 μm, and 150 μm were characterized. The devices' gain was determined as a function of bias voltage, incidence beam angle, and proton energy. This study was conducted in the scope of the PIONEER experiment, an experiment proposed at the Paul Scherrer Institute to perform high-precision measurements of rare pion decays. LGADs are considered for the active target (ATAR), and energy linearity is an important property for particle ID capabilities.

Particle tracking detectors↗

Real-time breath analysis towards a healthy human breath profile

Abstract The direct analysis of molecules contained within human breath has had significant implications for clinical and diagnostic applications in recent decades. However, attempts to compare one study to another or to reproduce previous work are hampered by: variability between sampling methodologies, human phenotypic variability, complex interactions between compounds within breath, and confounding signals from comorbidities. Towards this end, we have endeavored to create an averaged healthy human ‘profile’ against which follow-on studies might be compared. Through the use of direct secondary electrospray ionization combined with a high-resolution mass spectrometry and in-house bioinformatics pipeline, we seek to curate an average healthy human profile for breath and use this model to distinguish differences inter- and intra-day for human volunteers. Breath samples were significantly different in PERMANOVA analysis and ANOSIM analysis based on Time of Day, Participant ID, Date of Sample, Sex of Participant, and Age of Participant ( p < 0.001). Optimal binning analysis identify strong associations between specific features and variables. These include 227 breath features identified as unique identifiers for 28 of the 31 participants. Four signals were identified to be strongly associated with female participants and one with male participants. A total of 37 signals were identified to be strongly associated with the time-of-day samples were taken. Threshold indicator taxa analysis indicated a shift in significant breath features across the age gradient of participants with peak disruption of breath metabolites occurring at around age 32. Forty-eight features were identified after filtering from which a healthy human breath profile for all participants was created.

60 APPLIED LIFE SCIENCES↗

3D In-situ Stop Action Study of Recrystallization in Additively Manufactured 316L Stainless Steel: Reconstruction Optimization and Observations

A volume of an additively manufactured 316L stainless steel sample has been tracked during its recrystallization using near-and far-field High Energy Diffraction Microscopy (HEDM) and absorption tomography at Advanced Photon Source beamline 1-ID. A nearfield compatible in situ furnace allows monitoring of Bragg diffraction signals as they evolve out of a weak and diffuse background while the sample temperature is approximate to 1250 degrees C. The sample is rapidly cooled to room temperature after observation of significant signal evolution and ti similar to 0.035 mm(3) is mapped by the near-field method. Four cycles of heat treatment follow the structure from a state of small, isolated grains through impingement of domains to near completion of recyrstallization. Here, the experiment and reconstructions are described, and recrystallized fractions, twin domains, and distributions of grain boundary types are discussed.

Liu, He↗

DISCOVERY OF A ZZ CETI IN THE KEPLER MISSION FIELD

We report the discovery of the first identified pulsating DA white dwarf, WD J1916+3938 (Kepler ID 4552982), in the field of the Kepler mission. This ZZ Ceti star was first identified through ground-based, time-series photometry, and follow-up spectroscopy confirms that it is a hydrogen-atmosphere white dwarf with T {sub eff} = 11,129 {+-} 115 K and log g = 8.34 {+-} 0.06, placing it within the empirical ZZ Ceti instability strip. The object shows up to 0.5% amplitude variability at several periods between 800 and 1450 s. Extended Kepler observations of WD J1916+3938 could yield the best light curve, to date, of any pulsating white dwarf, allowing us to directly study the interior of an evolved object representative of the fate of the majority of stars in our Galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

A LIKELY MICRO-QUASAR IN THE SHADOW OF M82 X-1

The ultra-luminous X-ray source M82 X-1 is one of the most promising intermediate mass black hole candidates in the local universe based on its high X-ray luminosities (10{sup 40}–10{sup 41} erg s{sup −1}) and quasi-periodic oscillations, and is possibly associated with a radio flare source. In this work, applying the sub-pixel technique to the 120 ks Chandra observation (ID: 10543) of M82 X-1, we split M82 X-1 into two sources separated by 1.″1. The secondary source is not detected in other M82 observations. The radio flare source is not found to associate with M82 X-1, but is instead associated with the nearby transient source S1 with an outburst luminosity of ∼10{sup 39} erg s{sup −1}. With X-ray outburst and radio flare activities analogous to the recently discovered micro-quasar in M31, S1 is likely to be a micro-quasar hidden in the shadow of M82 X-1.

79 ASTRONOMY AND ASTROPHYSICS↗

Fine and ultrafine particles generated during fluidized bed combustion of different solid fuels

The paper reports an experimental study carried out with a 110-mm ID fluidized bed combustor focused on the characterization of particulates formation/emission during combustion of coal and non-fossil solid fuels. Fuels included: a bituminous coal, a commercial predried and granulated sludge (GS), a refuse-derived fuel (RDF), and a biomass waste (pine seed shells). Stationary combustion experiments were carried out analyzing the fate of fuel ashes. Fly ashes collected at the combustor exhaust were characterized both in terms of particle size distribution and chemical composition, with respect to both trace and major elements. Tapping-Mode Atomic Force Microscopy (TM-AFM) technique and high-efficiency cyclone-type collector devices were used to characterize the size and morphology of the nanometric-and micronic-size fractions of fly ash emitted at the exhaust respectively. Results showed that during the combustion process: I) the size of the nanometric fraction ranges between 2 and 65 nm; ii) depending on the fuel tested, combustion-assisted attrition or the production of the primary ash particles originally present in the fuel particles, are responsible of fine particle generation. The amount in the fly ash of inorganic compounds is larger for the waste-derived fuels, reflecting the large inherent content of these compounds in the parent fuels.

01 COAL, LIGNITE, AND PEAT↗

In-duct removal of mercury from coal-fired power plant flue gas by activated carbon: assessment of entrained flow versus wall surface contributions

In-duct mercury capture efficiency by activated carbon from coal-combustion flue gas was investigated. To this end, elemental mercury capture experiments were conducted at 100 C in a purposely designed 65-mm ID labscale pyrex apparatus operated as an entrained flow reactor. Gas residence times were varied between 0.7 and 2.0 s. Commercial-powdered activated carbon was continuously injected in the reactor and both mercury concentration and carbon elutriation rate were followed at the outlet. Transient mercury concentration profiles at the outlet showed that steady-state conditions were reached in a time interval of 15-20 min, much longer than the gas residence time in the reactor. Results indicate that the influence of the walls is non-negligible in determining the residence time of fine carbon particles in the adsorption zone, because of surface deposition and/or the establishment of a fluid-dynamic boundary layer near the walls. Total mercury capture efficiencies of 20-50% were obtained with carbon injection rates in the range 0.07-0.25 g/min. However, only a fraction of this capture was attributable to free-flowing carbon particles, a significant contribution coming from activated carbon staying near the reactor walls. Entrained bed experiments at lab-scale conditions are probably not properly representative of full-scale conditions, where the influence of wall interactions is lower. Moreover, previously reported entrained flow lab-scale mercury capture data should be reconsidered by taking into account the influence of particle-wall interactions.

01 COAL, LIGNITE, AND PEAT↗

AutoCCS: automated collision cross-section calculation software for ion mobility spectrometry–mass spectrometry

Abstract Motivation Ion mobility spectrometry (IMS) separations are increasingly used in conjunction with mass spectrometry (MS) for separation and characterization of ionized molecular species. Information obtained from IMS measurements includes the ion’s collision cross section (CCS), which reflects its size and structure and constitutes a descriptor for distinguishing similar species in mixtures that cannot be separated using conventional approaches. Incorporating CCS into MS-based workflows can improve the specificity and confidence of molecular identification. At present, there is no automated, open-source pipeline for determining CCS of analyte ions in both targeted and untargeted fashion, and intensive user-assisted processing with vendor software and manual evaluation is often required. Results We present AutoCCS, an open-source software to rapidly determine CCS values from IMS-MS measurements. We conducted various IMS experiments in different formats to demonstrate the flexibility of AutoCCS for automated CCS calculation: (i) stepped-field methods for drift tube-based IMS (DTIMS), (ii) single-field methods for DTIMS (supporting two calibration methods: a standard and a new enhanced method) and (iii) linear calibration for Bruker timsTOF and non-linear calibration methods for traveling wave based-IMS in Waters Synapt and Structures for Lossless Ion Manipulations. We demonstrated that AutoCCS offers an accurate and reproducible determination of CCS for both standard and unknown analyte ions in various IMS-MS platforms, IMS-field methods, ionization modes and collision gases, without requiring manual processing. Availability and implementation https://github.com/PNNL-Comp-Mass-Spec/AutoCCS. Supplementary information Supplementary data are available at Bioinformatics online. Demo datasets are publicly available at MassIVE (Dataset ID: MSV000085979).

47 OTHER INSTRUMENTATION↗

ORT: a workflow linking genome-scale metabolic models with reactive transport codes

Abstract Motivation Nutrient and contaminant behavior in the subsurface are governed by multiple coupled hydrobiogeochemical processes which occur across different temporal and spatial scales. Accurate description of macroscopic system behavior requires accounting for the effects of microscopic and especially microbial processes. Microbial processes mediate precipitation and dissolution and change aqueous geochemistry, all of which impacts macroscopic system behavior. As ‘omics data describing microbial processes is increasingly affordable and available, novel methods for using this data quickly and effectively for improved ecosystem models are needed. Results We propose a workflow (‘Omics to Reactive Transport—ORT) for utilizing metagenomic and environmental data to describe the effect of microbiological processes in macroscopic reactive transport models. This workflow utilizes and couples two open-source software packages: KBase (a software platform for systems biology) and PFLOTRAN (a reactive transport modeling code). We describe the architecture of ORT and demonstrate an implementation using metagenomic and geochemical data from a river system. Our demonstration uses microbiological drivers of nitrification and denitrification to predict nitrogen cycling patterns which agree with those provided with generalized stoichiometries. While our example uses data from a single measurement, our workflow can be applied to spatiotemporal metagenomic datasets to allow for iterative coupling between KBase and PFLOTRAN. Availability and implementation Interactive models available at https://pflotranmodeling.paf.subsurfaceinsights.com/pflotran-simple-model/. Microbiological data available at NCBI via BioProject ID PRJNA576070. ORT Python code available at https://github.com/subsurfaceinsights/ort-kbase-to-pflotran. KBase narrative available at https://narrative.kbase.us/narrative/71260 or static narrative (no login required) at https://kbase.us/n/71260/258. Supplementary information Supplementary data are available at Bioinformatics online.

54 ENVIRONMENTAL SCIENCES↗

BioMart Central Portal: an open database network for the biological community

BioMart Central Portal is a first of its kind, community-driven effort to provide unified access to dozens of biological databases spanning genomics, proteomics, model organisms, cancer data, ontology information and more. Anybody can contribute an independently maintained resource to the Central Portal, allowing it to be exposed to and shared with the research community, and linking it with the other resources in the portal. Users can take advantage of the common interface to quickly utilize different sources without learning a new system for each. The system also simplifies cross-database searches that might otherwise require several complicated steps. Several integrated tools streamline common tasks, such as converting between ID formats and retrieving sequences. The combination of a wide variety of databases, an easy-to-use interface, robust programmatic access and the array of tools make Central Portal a one-stop shop for biological data querying. Here, we describe the structure of Central Portal and show example queries to demonstrate its capabilities. Database URL: http://central.biomart.org.

59 BASIC BIOLOGICAL SCIENCES↗

Association between the findings of metachronous secondary primary malignancies and the number of Lugol-voiding lesions

Summary This study was designed to evaluate the relation between dysplastic squamous epithelium in the esophageal mucosa and the development of metachronous secondary primary malignancies (mSPM) other than esophagus after endoscopic resection (ER) in patients with early esophageal squamous cell carcinoma (SCC). We studied 330 patients with early esophageal SCC who underwent ER as a post hoc analysis of a prospective multicenter cohort study (UMIN Clinical Trials Registry ID UMIN000001676). Lugol-voiding lesions (LVL) were graded into 3 categories (A = no lesion; B = 1 to 9 lesions; C ≥ 10 lesions). The following variables were studied: (i) the incidences of mSPM other than esophagus; (ii) the standardized incidence ratios (SIRs) of mSPM; (iii) the cumulative incidence and total number of mSPM other than esophagus; and (iv) predictors of mSPM other than esophagus on analysis with a multivariate Cox proportional-hazards model. After a median follow-up of 46.6 months, mSPM other than esophagus was diagnosed in a total of 73 patients (90 lesions). Among the 106 patients in group C, 37 patients had mSPM (51 lesions), including head and neck cancer in 14 patients (24 lesions) and gastric cancer in 12 patients (16 lesions). The SIR of mSPM was 3.61 in this study subjects. An increase in the LVL grade (A to B to C) was associated with a progressive increase in the cumulative incidence rate of mSPM other than esophagus (P = 0.017 for A vs. C, P = 0.023 for B vs. C). An increase in the LVL grade (A to B to C) was also associated with a progressive increase in the total number of mSPM other than esophagus per 100 person-years (primary events, relative risk [RR] = 1.66 and 3.24 for grades B and C, respectively, vs. A, P = 0.002 for trend; all events, RR = 1.81 and 4.66 for grades B and C, respectively, vs. A, P < 0.0001 for trend). LVL grade C was a strong predictor of mSPM other than esophagus (RR = 3.41 for A vs. C). LVL grade may be a useful predictor of the risk of mSPM other than esophagus after ER in patients with early esophageal SCC.

Katada, Chikatoshi↗

Low Mutation Rate and Atypical Mutation Spectrum in Prasinoderma coloniale : Insights From an Early Diverging Green Lineage

Mutations are the ultimate source of genetic diversity on which natural selection and genetic drift act, playing a crucial role in evolution and long-term adaptation. At the molecular level, the spontaneous mutation rate (µ), defined as the number of mutations per base per generation, thus determines the adaptive potential of a species. Through a mutation accumulation experiment, we estimate the mutation rate and spectrum in Prasinoderma coloniale, a phytoplankton species from an early-branching lineage within the Archaeplastida, characterized by an unusually high genomic guanine-cytosine (GC) content (69.8%). We find that P. coloniale has a very low total mutation rate of µ = 2.00 × 10 -10 . The insertion–deletion mutation rate is almost 5 times lesser than the single nucleotide mutation rate with µ ID = 3.40 × 10 -11 and µ SNM = 1.62 × 10 -10 . Prasinoderma coloniale also exhibits an atypical mutational spectrum: While essentially all other eukaryotes show a bias toward GC to AT mutations, no evidence of this AT-bias is observed in P. coloniale. Since cytosine methylation is known to be mutagenic, we hypothesized that this may result from an absence of C-methylation. Surprisingly, we found high levels of C-methylation (14% in 5mC, 25% in 5mCG contexts). Methylated cytosines did not show increased mutation rates compared with unmethylated ones, not supporting the prevailing notion that C-methylation universally leads to higher mutation rates. Overall, P. coloniale combines a GC-rich genome with a low mutation rate and original mutation spectrum, suggesting the almost universal AT-bias may not have been present in the ancestor of the green lineage.

59 BASIC BIOLOGICAL SCIENCES↗

DNA Sequence-Based Identification of Fusarium : A Work in Progress

Accurate species-level identification of an etiological agent is crucial for disease diagnosis and management because knowing the agent’s identity connects it with what is known about its host range, geographic distribution, and toxin production potential. This is particularly true in publishing peer-reviewed disease reports, where imprecise and/or incorrect identifications weaken the public knowledge base. This can be a daunting task for phytopathologists and other applied biologists that need to identify Fusarium in particular, because published and ongoing multilocus molecular systematic studies have highlighted several confounding issues. Paramount among these are: (i) this agriculturally and clinically important genus is currently estimated to comprise more than 400 phylogenetically distinct species (i.e., phylospecies), with more than 80% of these discovered within the past 25 years; (ii) approximately one-third of the phylospecies have not been formally described; (iii) morphology alone is inadequate to distinguish most of these species from one another; and (iv) the current rapid discovery of novel fusaria from pathogen surveys and accompanying impact on the taxonomic landscape is expected to continue well into the foreseeable future. To address the critical need for accurate pathogen identification, our research groups are focused on populating two web-accessible databases (FUSARIUM-ID v.3.0 and the nonredundant National Center for Biotechnology Information nucleotide collection that includes GenBank) with portions of three phylogenetically informative genes (i.e., TEF1, RPB1, and RPB2) that resolve at or near the species level in every Fusarium species. The objectives of this Special Report, and its companion in this issue ( Torres-Cruz et al. 2022 ), are to provide a progress report on our efforts to populate these databases and to outline a set of best practices for DNA sequence-based identification of fusaria.

Plant Sciences↗

Correlating Enzymes to Antimicrobial Resistance in the Protein Data Bank

Antibiotic resistant bacteria are predicted to be the leading cause of death worldwide, with an expected death rate of 10 million people, annually, by 2050. It is vital that antimicrobial resistance (AMR) be understood at the molecular level. The Protein Data Bank (PDB) archive holds over 130,000 3D structures of macromolecular machines that can be analyzed using the RCSB PDB website at RCSB.org. Studying these 3D structures enables scientific research and education in a variety of fields, including drug discovery, nanotechnology, green energy, and disease. In this study, PDB enzymes related to antibiotic inhibitors were identified and further analyzed using additional bioinformatics including The Comprehensive Antibiotic Resistance Database (CARD). CARD holds up to date clinically relevant antibiotic related information. CARD identified 4,688 Genbank IDs (protein accession codes) that are related to AMR. These codes were then put into the Uniprot website which holds protein sequences. As a result, 696 macromolecules related to AMR were found in the PDB. I specifically researched Metallo Beta Lactamases (MBL) because have a large correlation to AMR and have been studied in great detail, with many examples in the PDB. Prominent enzymes in this category include the New Delhi Beta Lactamase which can cleave most if not all antibiotics. This particular “superbug” was found to cleave penicillin, cephalosporin, and carbapenem antibiotics. Using 3D visualizations of beta lactamase enzymes a correlation between zinc ions and spectrum of antibiotic resistance was found. For example, if an enzyme had two zinc ions instead of one it could inhibit broad spectrum antibiotics. In conclusion, the findings of this research presented here will be used to develop novel AMR tab at RCSB.org that will provide antimicrobial details of enzymes that were unavailable before. In the near future a phylogenetic tree of AMR related enzymes and classification details will be implemented. Support or Funding Information RCSB PDB is funded by a grant from the National Science Foundation (DBI‐1338415) , the National Institutes of Health , and the US Department of Energy . This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

Salcedo, Priscilla M.↗