Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Forward Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Predicting departure from nucleate boiling with advanced data- and physics-driven approaches

The subcooled and low-quality saturated flow boiling critical heat flux (CHF) corresponding to the departure from nucleate boiling (DNB) is one of the major limiting factors in the design and operation of pressurized water reactors (PWRs). Due to lack of agreement on its physical mechanisms, development of an accurate DNB-type CHF model has been elusive. The various steady-state (SS) predictive tools that have been proposed can be grouped into two categories: (1) data-driven methods—namely best-fit empirical correlations and look-up tables that result in relatively good agreement with specific experimental datasets but often fail to extend beyond their ranges of validity, and (2) the physics-based mechanistic models that rely on reasonable yet limited understanding of the underlying physics and apply constitutive relations to close the conservation equations. On one hand, with recent advances in computational capabilities and optimization techniques, machine learning (ML)-based methods constitute an alternative and a more advanced, data-driven approach. With enough data, they can be particularly useful in engineering fields where the physical phenomena are complex and challenging to model. On the other hand, a state-of-the-art physics-driven approach would not only provide more accurate prediction of SS CHF, but it would also help better understand and model transient applications. The data-driven regression models use deep feed-forward neural networks (NNs) and random forests to cross-validate with 1,865 CHF test cases, covering a wide range of flow conditions and channel geometries. The best-estimate ML-based predictors compare favorably with the widely used look-up table for annulus and plate, and sensitivity analysis has confirmed their effectiveness. The key advantage of ML-based methods is their online extensibility of applicability domain. The proposed physics-driven approach combines key assumptions and parameters in the relatively well-accepted theories of liquid sublayer dryout and near-wall bubble crowding. A more realistic understanding of local mechanisms has been modeled. The new model has been optimized and validated against 1,439 tube data, and it shows considerably improved performance when compared to a recent mechanistic model, demonstrating unbiased close agreement with measurements over a wide range of operating conditions. Future work will extend the improved physics-driven model to non-tube geometry applications and will couple the model with ML via a hybrid approach. The mechanistic SS work will also serve to improve understanding and to model transient CHF scenarios.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Effect of self-generated magnetic fields on x-ray emission in Kr-filled targets at the National Ignition Facility

We examine the effects of self-generated magnetic fields in a Kr gas pipe x-ray source platform. X-ray emission from Kr plasma is dependent on the plasma conditions, as the ionization state is largely a function of temperature. Magnetic fields are known to limit heat conduction, which increases temperature. We show that the emission in simulations of the gas pipe x-ray source is dependent on how self-generated magnetic fields are modeled. The inclusion of self-generated magnetic fields in simulations more accurately captures the emission of lower energy x-ray emission (L-shell), bringing results closer to experiments. The modeled x-ray emission and self-generated magnetic fields are shown to be particularly sensitive to the inclusion of the Nernst effect in simulations. Severely limiting the Nernst effect leads to a hotter Kr plasma, which can account for the discrepancy seen in earlier studies. By modifying the Nernst effect multiplier, we can achieve better experimental agreement in x-ray emission from gas pipes; the value of the multiplier that leads to the best agreement is dependent on the laser power of the drive. Currently, the suppression factor of the Nernst effect needed for high power drives (PL>200 TW) is more restrictive than what is currently put forward by non-local models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient mapping between void shapes and stress fields using Deep Convolutional Neural Networks with sparse data

Establishing fast and accurate structure-to-property relationships is an important component in the design and discovery of advanced materials. Physics-based simulation models like the finite element method (FEM) are often used to predict deformation, stress, and strain fields as a function of material microstructure in material and structural systems. Such models may be computationally expensive and time intensive if the underlying physics of the system is complex. This limits their application to solve inverse design problems and identify structures that maximize performance. In such scenarios, surrogate models are employed to make the forward mapping computationally efficient to evaluate. However, the high dimensionality of the input microstructure and the output field of interest often renders such surrogate models inefficient, especially when dealing with sparse data. Deep convolutional neural network (CNN) based surrogate models have shown great promise in handling such high-dimensional problems. In this paper, a single ellipsoidal void structure under a uniaxial tensile load represented by a linear elastic, high-dimensional and expensive-to-query, FEM model. We consider two deep CNN architectures, a modified convolutional autoencoder framework with a fully connected bottleneck and a UNet CNN, and compare their accuracy in predicting the von Mises stress field for any given input void shape in the FEM model. Additionally, a sensitivity analysis study is performed using the two approaches, where the variation in the prediction accuracy on unseen test data is studied through numerical experiments by varying the number of training samples from 20 to 100.

surrogate modeling; convolutional neural networks;↗

Implicit sampling combined with reduced order modeling for the inversion of vadose zone hydrological data

Bayesian inverse modeling techniques are computationally expensive because many forward simulations are needed when sampling the posterior distribution of the parameters. Here, in this paper, we combine the implicit sampling method and generalized polynomial chaos expansion (gPCE) to significantly reduce the computational cost of performing Bayesian inverse modeling. There are three steps in this approach: (1) find the maximizer of the likelihood function using deterministic approaches; (2) construct a gPCE-based surrogate model using the results from a limited number of forward simulations; and (3) efficiently sample the posterior distribution of the parameters using implicit sampling method. The cost of constructing the gPCE-based surrogate model is further decreased by using sparse Bayesian learning to reduce the number of gPCE coefficients that have to be determined. We demonstrate the approach for a synthetic ponded infiltration experiment simulated with TOUGH2. The surrogate model is highly accurate with mean relative error that is < 0.035% in predicting saturation and < 0.25% in predicting the likelihood function. The posterior distribution of the parameters obtained using our proposed technique is nearly indistinguishable from the results obtained from either an implicit sampling method or a Markov chain Monte Carlo method utilizing the full mode.

54 ENVIRONMENTAL SCIENCES↗

Global Barotropic Tide Modeling Using Inline Self‐Attraction and Loading in MPAS‐Ocean

Abstract We examine ocean tides in the barotropic version of the Model for Prediction Across Scales (MPAS‐Ocean), the ocean component of the Department of Energy Earth system model. We focus on four factors that affect tidal accuracy: self‐attraction and loading (SAL), model resolution, details of the underlying bathymetry, and parameterized topographic wave drag. The SAL term accounts for the tidal loading of Earth's crust and the self‐gravitation of the ocean and the load‐deformed Earth. A common method for calculating SAL is to decompose mass anomalies into their spherical harmonic constituents. Here, we compare a scalar SAL approximation versus an inline SAL using a fast spherical harmonic transform package. Wave drag accounts for energy lost by breaking internal tides that are produced by barotropic tidal flow over topographic features. We compare a series of successively finer quasi‐uniform resolution meshes (62.9, 31.5, 15.7, and 7.87 km) to a variable resolution (45 to 5 km) configuration. We ran MPAS‐Ocean in a single‐layer barotropic mode forced by five tidal constituents. The 45 to 5 km variable resolution mesh obtained the best total root‐mean‐square error (5.4 cm) for the deep ocean ( 1,000 m) tide compared to TPXO8 and ran twice as fast as the quasi‐uniform 8 km mesh, which had an error of 5.8 cm. This error is comparable to those found in other forward (non‐assimilative) ocean tide models. In future work, we plan to use MPAS‐Ocean to study tidal interactions with other Earth system components, and the tidal response to climate change.

54 ENVIRONMENTAL SCIENCES↗

A REVERSE SHOCK IN GRB 130427A

We present extensive radio and millimeter observations of the unusually bright GRB 130427A at z = 0.340, spanning 0.67-12 days after the burst. We combine these data with detailed multi-band UV, optical, NIR, and Swift X-ray observations and find that the broadband afterglow emission is composed of distinct reverse shock and forward shock contributions. The reverse shock emission dominates in the radio/millimeter and at ∼< 0.1 days in the UV/optical/NIR, while the forward shock emission dominates in the X-rays and at ∼> 0.1 days in the UV/optical/NIR. We further find that the optical and X-ray data require a wind circumburst environment, pointing to a massive star progenitor. Using the combined forward and reverse shock emission, we find that the parameters of the burst include an isotropic kinetic energy of E{sub K,{sub iso}} ≈ 2 × 10{sup 53} erg, a mass loss rate of M-dot ∼3×10{sup -8} M{sub ☉} yr{sup –1} (for a wind velocity of 1000 km s{sup –1}), and a Lorentz factor at the deceleration time of Γ(200 s) ≈ 130. Due to the low density and large isotropic energy, the absence of a jet break to ≈15 days places only a weak constraint on the opening angle, θ{sub j} ∼> 2.°5, and therefore a total energy of E{sub γ} + E{sub K} ∼> 1.2 × 10{sup 51} erg, similar to other gamma-ray bursts (GRBs). The reverse shock emission is detectable in this burst due to the low circumburst density, which leads to a slow cooling shock. We speculate that this property is required for the detectability of reverse shocks in radio and millimeter bands. Following on GRB 130427A as a benchmark event, observations of future GRBs with the exquisite sensitivity of the Very Large Array and ALMA, coupled with detailed modeling of the reverse and forward shock contributions, will test this hypothesis.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermodynamic consistency and fluctuations in mesoscopic stochastic simulations of reactive gas mixtures

It is essential that mesoscopic simulations of reactive systems reproduce the correct statistical distributions at thermodynamic equilibrium. By considering a compressible fluctuating hydrodynamics (FHD) simulation method of ideal gas mixtures undergoing reversible reactions described by the chemical Langevin equations, we show that thermodynamic consistency in reaction rates and the use of instantaneous temperatures for the evaluation of reaction rates is required for fluctuations for the overall system to be correct. We then formulate the required properties of a thermodynamically consistent reaction (TCR) model. As noted in the literature, while reactions are often discussed in terms of forward and reverse rates, these rates should not be modeled independently because they must be compatible with thermodynamic equilibrium for the system. Using a simple TCR model where each chemical species has constant heat capacity, we derive the explicit condition that the forward and reverse reaction rate constants must satisfy in order for the system to be thermodynamically consistent. We perform equilibrium and non-equilibrium simulations of ideal gas mixtures undergoing a reversible dimerization reaction to measure the fluctuational behavior of the system numerically. We confirm that FHD simulations with the TCR model give the correct static structure factor of equilibrium fluctuations. For the statistically steady simulation of a gas mixture between two isothermal walls with different temperatures, we show using the TCR model that the temperature variance agrees with the corresponding thermodynamic-equilibrium temperature variance in the interior of the system, whereas noticeable deviations are present in regions near walls, where chemistry is far from equilibrium.

Polimeno, Matteo [University of California, Merced↗

Surrogate Model Selection for Design Space Approximation And Surrogatebased Optimization

Surrogate models are used to map input data to output data when the actual relationship between the two is unknown or computationally expensive to evaluate for sensitivity analysis, uncertainty propagation and surrogate based optimization. This work evaluates the performance of eight surrogate modeling techniques for design space approximation and surrogate based optimization applications over a set of generated datasets with known characteristics. With this work, we aim to provide general rules for selecting an appropriate surrogate model form solely based on the characteristics of the data being modeled. Furthermore, the computational experiments revealed that, in general, multivariate adaptive regression spline models (MARS) and single hidden layer feed forward neural networks (ANN) yielded the most accurate predictions over the design space while Random Forest (RF) models most reliably identified the locations of the optimums when used for surrogate-based optimization.

97 MATHEMATICS AND COMPUTING↗

Uranium integral fission product yields for a spectrally-shaped 14.1 MeV neutron source at the National Ignition Facility

This paper describes the experimental results for an energy tuning assembly created to modify the National Ignition Facility deuterium–tritium fusion neutron source into a notional thermonuclear and prompt fission neutron spectrum, which has applications in integral measurements, nuclear data benchmarks, and radiation effects on microelectronics. The Monte Carlo neutron transport utilized MCNP5 to estimate the ETA-modified fluence using the ENDF-B/VIII.0 and IRDFF-II continuous energy nuclear data libraries, and SCALE Sampler was used to estimate the systematic nuclear data covariance using ENDF-B/VII.1 and IRDFF-II in a 252-group structure. The experiment fielded eight activation foils and a highly enriched uranium sample. This provided fifteen reaction channels that were used in a forward-fit comparison to the modeled results and to unfold the neutron spectrum using STAYSL. Gamma-ray spectrometry was performed on the activation and highly enriched uranium foils, and the reduced Χ 2 between the modeled and experimental values was 1.21. The results from the STAYSL unfold, reduced Χ 2 = 1.62, indicated that the modeled neutron spectrum was achieved and the systematic nuclear data uncertainty associated with the neutron transport and activation product cross sections was representative of the experiment. Integral cumulative fission product yield data were collected for 37 mass chains with a combination of gamma-ray spectrometry and radiochemical analysis. Fission product analysis was generally in agreement with two models using a semi-empirical fit and the General Observables of Fission code, with the exception of mass chains 88, 109, 111, 112, 113, 129, 139, 142, 144, 151, and 156.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Enhancing photoionization rate calculations in low-temperature plasmas using spectral methods

Photoionization plays a central role in the development of streamer discharges and other non-equilibrium plasma phenomena. It creates seed electrons, which are essential for positive streamer propagation, allowing the ionization front to move forward. Because of this, accurate modeling of photoionization is very important for predicting streamer behavior and plasma evolution. The photoionization process in air (N 2 – O 2 mixture) is often described by the Zheleznyak model (1982). This model is usually solved through Helmholtz-type equations that approximate the Zheleznyak photoionization model (Zheleznyak et al. 1982) as Partial Differential Equations (PDEs). Conventional numerical methods, such as the Finite Difference Method (FDM) or Finite Volume Method (FVM), are widely used to solve these equations. Although they are prevalent, the computational cost of these methods due to their need for matrix operations and iterative solver is demanding. To address this challenge, this work develops a spectral solver based on the Fast Fourier Transform (FFT) combined with Discrete Cosine Transform (DCT) and Discrete Sine Transform (DST) to calculate the photoionization rate efficiently in an axisymmetric cylindrical domain. This method naturally satisfies the boundary conditions used in the model and converts the PDE into algebraic ones in spectral space. Thus, avoids the need for iterative matrix solvers. When compared with FDM results, it is demonstrated that the new solver not only maintains accuracy, but also reduces the computational cost, showing a performance increase of approximately 100 compared to FDM over a wide range of problem sizes. The method is parallelized using Message Passing Interface (MPI) and has been integrated into a fluid plasma model for streamer simulation. Here, this FFT-based approach provides a fast and reliable alternative for calculating photoionization in fluid models, helping large-scale plasma simulations run faster and efficiently, and allows higher-resolution simulation without extra computational cost.

Axisymmetric system↗

Dependence of the rate of LiF ion pairing on the description of molecular interaction

We present an analysis of the dynamics of ion-pairing of Lithium Fluoride (LiF) in aqueous solvent using both detailed molecular simulation as well as reduced models within a Gener- alized Langevin Equation (GLE) framework. We explored the sensitivity of the ion-pairing phenomena to the details of descriptions of molecular interaction, comparing two empirical potentials to explicit quantum based density functional theory. We find quantitative differences in the potentials of mean force for ion-pairing as well as time dependent frictions that lead to variations in the rate constant and reactive flux correlation functions. These details reflect differences in solvent response to ion-pairing between different representations of molecular interaction and influence anharmonicity of the dynamic response. We find that the short time anharmonic response is recovered with a GLE parameterization. Recovery of the details of long time response may require extensions to the reduced model. We show that the utility of using a reduced model leads to a straight forward application of variational transition state the- ory concepts to the condensed phase system. The significance of this is reflected in the analysis of committor distributions and the variation of planar hypersurfaces, leading to an improved understanding of factors that determine the rate of LiF ion-pairing. CJM and GKS are supported by the U.S. Department of Energy‘s (DOE) Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest Na- tional Laboratory (PNNL) is operated for the Department of Energy by Battelle. MDB is grateful for the support of Laboratory Directed Research and Development funding under the auspices of PNNL’s Laboratory Initiative Materials Synthesis and Simulation across Scales (MS3). Additional computing resources were generously allocated by PNNL’s Institutional Computing program. EP acknowledges support from PNNL’s Alternate Sponsored Fellowship program and IMPRS Dres- den.Support to P.J. from the Czech Science Foundation (grant P208/12/G016) and the Academy of Sciences (Praemium Academie award) is gratefully acknowledged.

Pluharova, Eva↗

Microbial Models for Simulating Soil Carbon Dynamics: A Review

Abstract Soils store the largest amount of carbon (C) in the biosphere, and the C pool in soil is critical to the global C balance. Numerous microbial models have been developed over the last few decades to represent microbial processes that regulate the responses of soil organic carbon (SOC) to climate change. However, the representation of microbial processes varies, and how microbial processes are incorporated into SOC models has not been well explored. Here, we reviewed 71 microbial models to characterize the microbial processes incorporated into SOC models and analyzed variations in mechanistic complexity. We revealed that (a) four processes (microbial‐mediated decomposition, mineral interaction, microbial necromass recycling, and active and dormant microbial dynamics) are commonly incorporated in microbial models, (b) ∼48% of models simulate only one microbial process (i.e., microbial‐mediated decomposition) and 35% of models simulate two microbial processes: for example, microbial‐mediated decomposition and mineral interaction, (c) more than 80% microbial models use nonlinear equations, such as forward Michaelis‐Menten kinetics, to represent SOC decomposition, (d) the concept of persistence of SOC due to its intrinsic properties has been replaced by organo‐mineral interaction (∼39% of microbial models) that protects SOC from decomposition, and (e) various temperature and moisture modifiers and pH effects have been used to explain the environmental effect on microbial processes. In the future, to realistically incorporate microbial processes into Earth System Models, it is imperative to identify experimental evidence on rate limitation processes and firmly ground model structure on the field and laboratory data.

Environmental Sciences & Ecology↗

Bayesian weighting of climate models based on climate sensitivity

Using climate model ensembles containing members that exhibit very high climate sensitivities to increasing CO 2 concentrations can result in biased projections. Various methods have been proposed to ameliorate this ‘hot model’ problem, such as model emulators or model culling. Here, we utilize Bayesian Model Averaging as a framework to address this problem without resorting to outright rejection of models from the ensemble. Taking advantage of multiple lines of evidence used to construct the best estimate of the earth’s climate sensitivity, the Bayesian Model Averaging framework produces an unbiased posterior probability distribution of model weights. The updated multi-model ensemble projects end-of-century global mean surface temperature increases of 2 °C for a low emissions scenario (SSP1-2.6) and 5 °C for a high emissions scenario (SSP5-8.5). These estimates are lower than those produced using a simple multi-model mean for the CMIP6 ensemble. The results are also similar to results from a model culling approach, but retain some weight on low-probability models, allowing for consideration of the possibility that the true value could lie at the extremes of the assessed distribution. Our results showcase Bayesian Model Averaging as a path forward to project future climate change that is commensurate with the available scientific evidence.

59 BASIC BIOLOGICAL SCIENCES↗

Origin and acceleration of suprathermal particles

Observations over the last decade have shown that suprathermal ions with energies above that of the core or bulk solar wind protons (i.e., ~1-2 keV/nucleon) are an important constituent of the overall seed population that is accelerated in solar and interplanetary events. Despite the recent recognition of their importance, the origin of these populations and the method of their acceleration remains poorly understood. This is partly due to the fact that these particles exist in the so-called tail regions of the corresponding solar wind distributions where high temporal and sensitivity measurements are sparse. Moreover, observations comprising long-term averages (between hours to more than a day) show conflicting results. For instance, below ~40 keV/nucleon the ion differential intensities in the solar wind frame appear to exhibit a near-constant power-law spectral slope of ~1.5, perhaps indicating a universal acceleration mechanism. In contrast, at energies greater than ~40 keV/nucleon, the ion composition changes with solar activity, and the energy spectra are significantly steeper, perhaps indicating that the suprathermal pool of material also comprises lower-energy particle populations accelerated in corotating interaction regions, interplanetary shocks, and solar energetic particle events. This paper discusses key observations of suprathermal ions and electrons in terms of state-of-the-art theories and models that have been put forward to account for their origin and acceleration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiative absorption enhancements by black carbon controlled by particle-to-particle heterogeneity in composition

Black carbon (BC) absorbs solar radiation, leading to a strong but uncertain warming effect on climate. A key challenge in modeling and quantifying BC’s radiative effect on climate is predicting enhancements in light absorption that result from internal mixing between BC and other aerosol components. Modeling and laboratory studies show that BC, when mixed with other aerosol components, absorbs more strongly than pure, uncoated BC; however, some ambient observations suggest more variable and weaker absorption enhancement. We show that the lower-than-expected enhancements in ambient measurements result from a combination of two factors. First, the often used spherical, concentric core-shell approximation generally overestimates the absorption by BC. Second, and more importantly, inadequate consideration of heterogeneity in particle-to-particle composition engenders substantial overestimation in absorption by the total particle population, with greater heterogeneity associated with larger model–measurement differences. We show that accounting for these two effects—variability in per-particle composition and deviations from the core-shell approximation—reconciles absorption enhancement predictions with laboratory and field observations and resolves the apparent discrepancy. Furthermore, our consistent model framework provides a path forward for improving predictions of BC’s radiative effect on climate.

54 ENVIRONMENTAL SCIENCES↗

Circumventing data imbalance in magnetic ground state data for magnetic moment predictions

Abstract Magnetic materials play a crucial role in the transition to more sustainable forms of energy and electric vehicles. There is an anticipated shortage in magnetic materials in the future, and as a result there is an urgent need to discover and design new magnetic materials. Computational magnetic material design using density functional theory is daunting because of the challenge in identifying magnetic ground states from a combinatorially large set of possibilities. Machine learning offers a path forward by enabling efficient surrogate models that can more readily enumerate these states, but there is a dearth of training data available, and what is available tends to be imbalanced with too much non-magnetic data. In this work we show that the discrete and previously tackled data imbalance that exists at the level of the magnetic ordering leads to an imbalanced continuous distribution with many zeros when the data is unraveled at the atomic magnetic moment level, which subsequently leads to models with low accuracy for magnetic properties. We mitigate this by using a two-part model framework. Our scheme is able to classify atoms into magnetic and non-magnetic with an F1 score and Matthew’s correlation coefficient (MCC) of ~91% and then to provide an implicit embedding representation that maps directly onto the magnitude of the magnetic moment with a mean absolute error of 0.1 μ B . Beyond screening for new magnetic materials, we demonstrate an additional practical use case of our scheme: the provision of good initial guesses for magnetic moments in first-principles electronic relaxations. Such initialization is shown to lead to faster convergence to configurations that lie closer to the ground state.

Computer Science↗

Random strain induced correlations in materials with intertwined nematic and magnetic orders

Electronic nematicity is rarely observed as an isolated instability of a correlated electron system. Instead, in iron pnictides and in certain cuprates and heavy-fermion materials, nematicity is intertwined with an underlying spin-stripe or charge-stripe state. As a result, random strain, ubiquitous in any real crystal, creates both random-field disorder for the nematic degrees of freedom and random-bond disorder for the spin or charge ones. Here, we put forward an Ashkin-Teller model with random Baxter fields to capture the dual role of random strain in nematic systems for which nematicity is a composite order arising from a stripe state. Using Monte Carlo to simulate this random Baxter-field model, we find not only the expected break-up of the system into nematic domains, but also the emergence of nontrivial disorder-promoted magnetic correlations. Such correlations enhance and tie up the fluctuations associated with the two degenerate magnetic stripe states from which nematicity arises, leaving characteristic signatures in the spatial profile of the magnetic domains, in the configurational space of the spin variables, and in the magnetic noise spectrum. We discuss possible experimental manifestations of these effects in iron-pnictide superconductors. Furthermore, our work establishes the random Baxter-field model as a more complete alternative to the random-field Ising model to describe complex electronic nematic phenomena in the presence of disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Directed flow in ultrarelativistic heavy-ion collisions

We study the generation of the directed flow in the hydrodynamic expansion of hot matter formed in ultrarelativistic heavy-ion collisions at sq root(s)=200 GeV. The experimentally observed negative-directed flow in a wide range of central pseudorapidities is reproduced, assuming that the fireball is tilted away from the collision axis. The tilt of the source is consistent with a preferential emission in the forward-backward hemisphere from forward-backward participating nucleons. The model reproduces the experimentally observed scaling of the directed flow when going from Au-Au to Cu-Cu systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗