Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Focuses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Specific features of X-ray generation by plasma focus chambers with deuterium and deuterium–tritium fillings

The process of hard X-ray (HXR) generation in plasma focus (PF) chambers was studied experimentally. The radiation was recorded using scintillation detectors with a high time resolution and thermoluminescent detectors in combination with the method of absorbing filters. Time-resolved analysis of the processes of neutron and X-ray generation in PFs is performed. The spectra of HXR emission from PF chambers with deuterium and deuterium–tritium fillings are determined. In experiments with PF chambers filled with a deuterium–tritium mixture, in addition to the HXR pulse with photon energies of up to 200–300 keV, a γ-ray pulse with photon energies of up to 2.5–3.0 MeV is recorded, and a mechanism of its generation is proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic measurements of the parameters of the helium plasma jets generated in the plasma focus discharge at the PF-3 facility

The spectroscopic technique used to measure the parameters of the plasma jets generated in the plasma focus discharge and those of the plasma of the immobile gas through which these jets propagate is described. The time evolution of the intensities and shapes of spectral lines in experiments carried out with helium at the PF-3 facility was studied by means of electron-optical streak cameras. The plasma electron temperature, T ≈ 4–5 eV, was determined from the intensity ratio of two spectral lines, one of which (λ{sub 1} = 5876 Å) belongs to neutral helium, while the other (λ{sub 2} = 4686 Å), to hydrogen-like helium ions. The plasma density at different time instants was determined from the Stark broadening of these lines in the electric fields of different nature. The plasma density is found to vary from 4 × 10{sup 14} to 2 × 10{sup 17} cm{sup −3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The inverse skin effect in the Z-pinch and plasma focus

The inverse skin effect and its influence on the dynamics of high-current Z-pinch and plasma focus discharges in deuterium are analyzed. It is shown that the second compression responsible for the major fraction of the neutron yield can be interpreted as a result of the inverse skin effect resulting in the axial concentration of the longitudinal current density and the appearance of a reversed current in the outer layers of plasma pinches. Possible conditions leading to the enhancement of the inverse skin effect and accessible for experimental verification by modern diagnostics are formulated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a 500-kJ Mather-type plasma focus device

In this article, design of a 500-kJ Mather-type plasma focus device to achieve 10{sup 11} neutrons/shot is reported. One of its important characteristics is the triple-part anode design. The anode is surrounded by an alumina insulator. The second part of the anode is changeable in order to locate cylindrical, conical, or other shapes of pieces mounted on it. This geometry leads to the easier investigation of the neutron and X-ray emissions of the device. The third part of the anode is for changing the materials exposed to different kinds of radiations. The design parameters are considered by semiempirical and empirical formulas and are sketched by Solidworks software. Also, the peak current and neutron yield are estimated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser-optical measurements of the velocities of the plasma jets formed from different gases in a kilojoule-range plasma focus facility

The velocities of the plasma jets formed from Ne, N{sub 2}, Ar, and Xe gases in plasma focus facilities were determined by means of laser-optical shadowgraphy of the shock waves generated at the jet leading edge. In spite of the almost tenfold ratio between the atomic weights of these gases, the outflow velocities of the plasma jets formed in experiments with these gases differ by less than twice, in the range of (0.7–1.1) × 10{sup 7} cm/s under similar discharge conditions. The energies of the jet ions were found to vary from 0.7 keV for nitrogen to 4 keV for xenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of the plasma current sheath in plasma focus discharges in different gases

The shape of the plasma current sheath (PCS) in the final stage of its radial compression, the dynamics of pinching, and the subsequent pinch decay in plasma focus (PF) discharges in different gases are studied using an improved multichannel system of electron-optical plasma photography and a newly elaborated synchronization system. The PCS structure in discharges in heavy gases (Ne, Ar) is found to differ significantly from that in discharges in hydrogen and deuterium. The influence of a heavy gas (Xe) additive to hydrogen and deuterium on the structure and compression dynamics of the PCS is investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental study of the performance of a very small repetitive plasma focus device in different working conditions

SORENA-1 is a very small repetitive Mather-type plasma focus device (20 J) that can operate at frequencies up to 1 Hz. This device has been designed and constructed in the Plasma and Nuclear Fusion Research School of the Nuclear Science and Technology Research Institute of Iran. In this article, the structure of SORENA-1 is described and results of experiments with Ar, Ne, and D{sub 2} working gases at several discharge voltages and initial pressures are presented and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of ion beam angular distribution at different helium gas pressures in a plasma focus device by large-area polycarbonate detectors

The paper presents an experimental study and analysis of full helium ion density angular distributions in a 4-kJ plasma focus device (PFD) at pressures of 10, 15, 25, and 30 mbar using large-area polycarbonate track detectors (PCTDs) (15-cm etchable diameter) processed by 50-Hz-HV electrochemical etching (ECE). Helium ion track distributions at different pressures, in particular, at the main axis of the PFD are presented. Maximum ion track density of ~4.4 × 10{sup 4} tracks/cm{sup 2} was obtained in the PCTD placed 6 cm from the anode. The ion distributions for all pressures applied are ring-shaped, which is possibly due to the hollow cylindrical copper anode used. The large-area PCTD processed by ECE proves, at the present state-of-theart, a superior method for direct observation and analysis of ion distributions at a glance with minimum efforts and time. Some observations of the ion density distributions at different pressures are reported and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative study of X-ray emission from plasma focus relative to different preionization schemes

A 2.7-kJ Mather-type plasma focus has been investigated for X-ray emission with preionization produced by an α-source, a β-source, and a shunt resistor. Time-resolved and time integrated measurements are carried out using a PIN-diode-based X-ray spectrometer and pinhole camera. The β-source ({sub 28}Ni{sup 63}) assisted preionization enhances the X-ray emission up to 25%, while preionization induced by depleted uranium ({sub 92}U{sup 238}) increases both Cu-K{sub α} and total X-ray yield of about 100%. The preionization caused by the optimum shunt resistor enhances the Cu-K{sub α} and total X-ray yield of about 53%. It is found that preionization also broadens the working pressure range for the high X-ray yield and improves the shot-to-shot reproducibility of the system. Pinhole images reveal that the X-ray emission from the anode tip is dominant owing to impact of electron bombardment, while the X-ray emission from hot spots is also visible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dose Measurements in a 20-J Repetitive Plasma Focus

In this article, the results of X-ray dose measurements executed using thermoluminescent dosimeters in experiments with a very small (20 J) repetitive plasma focus device named SORENA-1 are presented and analyzed. The working gas in these experiments was Argon. Also, pinch formation in experiments with this device has been observed. This device has been designed and constructed in Plasma and Nuclear Fusion Research School of Nuclear Science and Technology Research Institute of Iran. From these results, it is concluded that we can do experiments with this device using Ar as working gas all over the working days of year, and a good symmetry for measured dose around the device has been seen.

61 RADIATION PROTECTION AND DOSIMETRY↗

Localized States near a Thin Layer with the Nonlinear Properties Separating Nonlinear Focusing and Defocusing Media

Based on the nonlinear Schrödinger equation, new types of localized states near the contact of defocusing and self-focusing media with the Kerr nonlinearity separated by a thin defect layer with the similar nonlinearity have been described. The occurrence of the localized states of two types is demonstrated. The dispersion relations between the excitation localization energy and characteristics of the media and defect layer have been obtained. The localization energy levels for particular cases have been obtained in the explicit analytical form.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the Mechanism of Absorption and Restoration of Radiation Transmission in the Channel of Small-Scale Self-Focusing of a Short Laser Pulse in Neodymium Glass

When diagnosing a small-scale self-focusing (SSSF) channel of a 0.5-ns laser pulse with an intensity of 3–5 GW/cm{sup 2} in neodymium glasses, an absorption jump was detected (with a front of ≈0.5 ns) at wavelengths of 1.06 and 0.66 μm in addition to filament-like damage typical of SSSF, spectral broadening, and laser radiation scattering. The absorption coefficient reached 0.15 cm{sup –1}, and transmission in the medium was restored during 15–35 ns for phosphate glass and 5–10 ns for silicate glass. The physical bases of this effect of the appearance and relaxation of absorption in glasses have not been previously presented. An analysis of the experimental data showed that the absorption jump is due to the fast population of the {sup 4}I{sub 11/2} level of Nd{sup 3+} ions in glasses when nonlinear processes occur in the SSSF channel such as stimulated Raman scattering and broadening of the laser pulse spectrum. The relaxation time of the population at the {sup 4}I{sub 11/2} level and the restoration of transmission in glasses after the termination of the laser pulse are determined by the characteristic sizes of the Nd{sup 3+} ions excitation regions arising in the samples upon interference of the laser and scattered radiation, as well as the thermophysical characteristics of the glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation of the neutron yield from the plasma focus upon variations in the magnetic field energy of the discharge circuit

The relation between neutron yield Y and magnetic field energy variations ΔW in the discharge circuit has been studied for a Mather-type plasma-focus camera. The activation technique (activation of silver isotopes) has been used to measure the integral yield of DD neutrons from the source. The time dependence of the neutron yield has been recorded by scintillation detectors. For the device used in the investigations, the neutron yield exhibits a linear dependence on variations in the magnetic field energy ΔW in the discharge circuit at the instant of neutron generation. It is also found that this dependence is related to the initial deuteron pressure in the discharge chamber.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of External Longitudinal Electric Field on Tracking Force upon the Interaction of a Relativistic Electron Beam with the Ion Channel in the Ion Focusing Regime

It has been shown that, in the presence of a longitudinal external electric field, the magnitude of the tracking or detracking force that emerges during the acceleration or deceleration of a beam propagating along a preliminarily created ion channel in the ion-focusing regime can be commensurate with the force of the interaction of a relativistic electron beam with the ion plasma channel.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-Optical System of an Ion Source with Energy Focusing in the Formed Beam

Ways to reduce ion beam intensity losses in a mass spectrometric ion source, which are caused by chromatic aberration of its immersion ion-optical system, are considered. These losses are rather significant in forming a beam from ions with a large energy spread. The reduction of aberration losses is especially important when ion sources are used jointly with mass analyzers with energy focusing. It is shown that these losses can be reduced significantly by using a new type of ion-optical system of the ion source, which includes achromatic elements. A special method for calculating such elements is given. Computer simulations have shown high efficiency of such elements in the ion-optical path of ion sources of mass spectrometers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Filamentation and Self-Focusing of Electron Beams in Vacuum and Gas Diodes

In this paper, we experimentally studied pulsed electron beams with a high local density. The conditions in which the energy density cumulation is observed during the interaction of electrons with the anode are shown to develop in vacuum and gas diodes at nanosecond and subnanosecond durations of a beam current pulse and a decrease in the interelectrode gap. The average electron energy in filamentation and self-focusing of an electron beam in a vacuum diode of an accelerator at a current of ~2 kA and a no-load voltage of ~400 kV was established to be 50–100 keV while the energy density was 10{sup 9}–10{sup 10} J/cm{sup 3}. It is confirmed that the beam current density in a gas diode can exceed 1 kA/cm{sup 2}. It is hypothesized that superdense electron beams in vacuum and gas diodes are formed as a result of avalanche multiplication of runaway electrons in the cathode–anode gap plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fully three-dimensional simulation and modeling of a dense plasma focus

A dense plasma focus (DPF) is a pulsed-power machine that electromagnetically accelerates and cylindrically compresses a shocked plasma in a Z-pinch. The pinch results in a brief (~ 100 ns) pulse of X-rays, and, for some working gases, also a pulse of neutrons. A great deal of experimental research has been done into the physics of DPF reactions, and there exist mathematical models describing its behavior during the different time phases of the reaction. Two of the phases, known as the inverse pinch and the rundown, are approximately governed by magnetohydrodynamics, and there are a number of well-established codes for simulating these phases in two dimensions or in three dimensions under the assumption of axial symmetry. There has been little success, however, in developing fully three-dimensional simulations. In this work we present three-dimensional simulations of DPF reactions and demonstrate that three-dimensional simulations predict qualitatively and quantitatively different behavior than their two-dimensional counterparts. One of the most important quantities to predict is the time duration between the formation of the gas shock and Z-pinch, and the three-dimensional simulations more faithfully represent experimental results for this time duration and are essential for accurate prediction of future experiments.

Dense plasma focus, magnetohydrodynamics, simulati↗

ALEGRA-HEDP simulations of the dense plasma focus.

We have carried out 2D simulations of three dense plasma focus (DPF) devices using the ALEGRA-HEDP code and validated the results against experiments. The three devices included two Mather-type machines described by Bernard et. al. and the Tallboy device currently in operation at NSTec in North Las Vegas. We present simulation results and compare to detailed plasma measurements for one Bernard device and to current and neutron yields for all three. We also describe a new ALEGRA capability to import data from particle-in-cell calculations of initial gas breakdown, which will allow the first ever simulations of DPF operation from the beginning of the voltage discharge to the pinch phase for arbitrary operating conditions and without assumptions about the early sheath structure. The next step in understanding DPF pinch physics must be three-dimensional modeling of conditions going into the pinch, and we have just launched our first 3D simulation of the best-diagnosed Bernard device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗