Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field Procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A multidomain and multidimensional numerical analysis of flow in fuelside preburner, high pressure turbine, hot gas manifold and main injector assembly of the Space Shuttle main engine

The Space Shuttle Main Engine (SSME) consists of a large number of critical components each serving a special purpose. Any design change in one of these components not only alters its performance but also the performance of the ones in the upstream and in the downstream. To evaluate the effects of such a design change on the flow fields and on SSME's overall performance a multidomain and multidimensional analytical procedure has been developed and applied here to the series of components on the fuel side of the SSME. The results obtained from the multidomain analysis and their comparison with the single-domain solution when the SSME is operating at Full Power Load indicates that the multidomain model shows greater realism. It is concluded that this modeling technique would assist the designer significantly to achieve still higher performance levels of the SSME.

Mukerjee, T.↗
NASA NTRS1988

Calculating Turbine-Blade Loads

Rotor/stator interactions analyzed with help of approximations. Analytical procedure assists designers of turbomachinery in calculating dynamic loads on blades and vanes. Procedure involves approximations simplifying calculation of phase angles and amplitudes of pressure fields throughout blade and vane rows at each disturbance frequency.

Meng, Sen Yih↗
NASA NTRS1991

Static second-order polarizability calculations for large molecular systems

A procedure to calculate all second-order polarizability tensor elements in static fields has been developed. The calculations are based on semiempirical Hamiltonians (MNDO) that include shaped electric fields. The technique has been applied to mono-, di-, and trisubstituted benzenes incorporating nitro, methyl, and primary and secondary amino groups.

Cardelino, Beatriz H.↗
NASA NTRS1993

Vortex flap flight test operations, a safe approach

A flight test experiment was conducted at the Langley Research Center to evaluate a wing leading-edge vortex flap concept designed for use on an aircraft with highly swept wings. The flap concept was designed as a modification to the wing leading edge of an F-106B airplane. The flight testing required operations at conditions that would exceed the structural load envelope of the basic airplane in order to acquire desired research data for the modified configuration. Accordingly, the operational envelope of the modified aircraft was incrementally expanded and real-time monitoring of airframe strains at critical wing locations was mandated to insure safety of flight. The flight tests were conducted in two phases: Phase I to establish baseline data with the unmodified wing, and Phase II to determine the effects of the vortex flap on performance, handling qualities, and flow field characteristics. This paper focuses on a description of the approach and procedures used to provide the strain-gage monitoring to insure structural integrity. Highlights of the wing modification and the overall operation are also included. Within a -year period, 110 research flights were successfully completed, providing researchers with sufficient data to assess the potential benefits ascribed to the vortex flap concept without encountering severe structural problems or mishaps.

Dicarlo, Daniel J.↗
NASA NTRS1969

Numerical results in the statistical theory of thermal turbulence

Several statistical theories of turbulence are applied to thermal convection problem, and are compared in a series of numerical calculations. Results are presented for both the case of very large and very small Prandtl numbers, and for moderate Rayleigh numbers. The theories compared are the direct-interaction approximation, the self-consistent field approximation, the quasi-linear approximation, the quasi-normal approximation, and a 'Markovianized' quasi-normal approximation. Results for these theories are then compared with some simple exact solutions to the statistical problem. The results indicate that the direct-interaction and the self-consistent field method give satisfactory results at all Rayleigh numbers investigated, whereas the procedures based on the quasi-normal approximation give sensible results only at small Rayleigh numbers.

Herring, J. R.↗
NASA NTRS1994

Heavy ion induced DNA-DSB in yeast and mammalian cells

Molecular changes at the DNA are assumed to be the main cause for radiation effects in a number of organisms. During the course of the last decades techniques have been developed for measuring DNA double-strand breaks (dsb), generally assumed to be the most critical DNA lesions. The outcome of all those different approaches portrays a collection of data useful for a theoretical description of radiation action mechanisms. However, in the case of heavy ion induced DNA dsb the picture is not quite clear yet and further projects and strategies have to be developed. The biological systems studied in our group are yeast and mammalian cells. While in the case of yeast cells technical and methodical reasons highlight these organisms mammalian cells reach greater importance when dsb repair studies are performed. In both types of organisms the technique of pulsed-field gel electrophoresis (PFGE) is applied, although with different modifications and evaluation procedures mainly due to the different genome sizes.

Loebrich, M.↗
NASA NTRS1994

A passive microwave technique for estimating rainfall and vertical structure information from space. Part 1: Algorithm description

This paper describes a multichannel physical approach for retrieving rainfall and vertical structure information from satellite-based passive microwave observations. The algorithm makes use of statistical inversion techniques based upon theoretically calculated relations between rainfall rates and brightness temperatures. Potential errors introduced into the theoretical calculations by the unknown vertical distribution of hydrometeors are overcome by explicity accounting for diverse hydrometeor profiles. This is accomplished by allowing for a number of different vertical distributions in the theoretical brightness temperature calculations and requiring consistency between the observed and calculated brightness temperatures. This paper will focus primarily on the theoretical aspects of the retrieval algorithm, which includes a procedure used to account for inhomogeneities of the rainfall within the satellite field of view as well as a detailed description of the algorithm as it is applied over both ocean and land surfaces. The residual error between observed and calculated brightness temperatures is found to be an important quantity in assessing the uniqueness of the solution. It is further found that the residual error is a meaningful quantity that can be used to derive expected accuracies from this retrieval technique. Examples comparing the retrieved results as well as the detailed analysis of the algorithm performance under various circumstances are the subject of a companion paper.

Kummerow, Christian↗
NASA NTRS1996

A Real-Time Position-Locating Algorithm for CCD-Based Sunspot Tracking

NASA Marshall Space Flight Center's (MSFC) EXperimental Vector Magnetograph (EXVM) polarimeter measures the sun's vector magnetic field. These measurements are taken to improve understanding of the sun's magnetic field in the hopes to better predict solar flares. Part of the procedure for the EXVM requires image motion stabilization over a period of a few minutes. A high speed tracker can be used to reduce image motion produced by wind loading on the EXVM, fluctuations in the atmosphere and other vibrations. The tracker consists of two elements, an image motion detector and a control system. The image motion detector determines the image movement from one frame to the next and sends an error signal to the control system. For the ground based application to reduce image motion due to atmospheric fluctuations requires an error determination at the rate of at least 100 hz. It would be desirable to have an error determination rate of 1 kHz to assure that higher rate image motion is reduced and to increase the control system stability. Two algorithms are presented that are typically used for tracking. These algorithms are examined for their applicability for tracking sunspots, specifically their accuracy if only one column and one row of CCD pixels are used. To examine the accuracy of this method two techniques are used. One involves moving a sunspot image a known distance with computer software, then applying the particular algorithm to see how accurately it determines this movement. The second technique involves using a rate table to control the object motion, then applying the algorithms to see how accurately each determines the actual motion. Results from these two techniques are presented.

Taylor, Jaime R.↗
NASA NTRS2000

The DAO Retrospective Data Assimilation System

The fixed-lag Kalman smoother of Cohn et al. (1994), or a version of a more computationally feasible approximation of it developed by Todling et al. (1998), is under implementation at the Data Assimilation Office (DAO) to build a retrospective data assimilation system (RDAS). The initial version of the RDAS uses the physical-space statistical analysis system and a modification of the incremental analysis update (IAU) procedure of Bloom et al. (1996); a follow up version of the RDAS Nill require the use of the adjoint of the DAO general circulation model (developed by Y. Yang and M Navon). The retrospective procedure is designed to produce improved analyses as well as improved assimilated fields consequently providing an improved climate representation through data assimilation.

Todling, Richardo↗
NASA NTRS2000

Determining the Ocean's Role on the Variable Gravity Field and Earth Rotation

A number of ocean models of different complexity have been used to study changes in the oceanic angular momentum (OAM) and mass fields and their relation to the variable Earth rotation and gravity field. Time scales examined range from seasonal to a few days. Results point to the importance of oceanic signals in driving polar motion, in particular the Chandler and annual wobbles. Results also show that oceanic signals have a measurable impact on length-of-day variations. Various circulation features and associated mass signals, including the North Pacific subtropical gyre, the equatorial currents, and the Antarctic Circumpolar Current play a significant role in oceanic angular momentum variability. The impact on OAM values of an optimization procedure that uses available data to constrain ocean model results was also tested for the first time. The optimization procedure yielded substantial changes, in OAM, related to adjustments in both motion and mass fields,as well as in the wind stress torques acting on the ocean. Constrained OAM values were found to yield noticeable improvements in the agreement with the observed Earth rotation parameters, particularly at the seasonal timescale.

Ponte, Rui M.↗
NASA NTRS2005

Knowledge Representation Standards and Interchange Formats for Causal Graphs

In many domains, automated reasoning tools must represent graphs of causally linked events. These include fault-tree analysis, probabilistic risk assessment (PRA), planning, procedures, medical reasoning about disease progression, and functional architectures. Each of these fields has its own requirements for the representation of causation, events, actors and conditions. The representations include ontologies of function and cause, data dictionaries for causal dependency, failure and hazard, and interchange formats between some existing tools. In none of the domains has a generally accepted interchange format emerged. The paper makes progress towards interoperability across the wide range of causal analysis methodologies. We survey existing practice and emerging interchange formats in each of these fields. Setting forth a set of terms and concepts that are broadly shared across the domains, we examine the several ways in which current practice represents them. Some phenomena are difficult to represent or to analyze in several domains. These include mode transitions, reachability analysis, positive and negative feedback loops, conditions correlated but not causally linked and bimodal probability distributions. We work through examples and contrast the differing methods for addressing them. We detail recent work in knowledge interchange formats for causal trees in aerospace analysis applications in early design, safety and reliability. Several examples are discussed, with a particular focus on reachability analysis and mode transitions. We generalize the aerospace analysis work across the several other domains. We also recommend features and capabilities for the next generation of causal knowledge representation standards.

Throop, David R.↗
NASA NTRS2005

Spaceborne Doppler Radar Measurements of Rainfall: Correction of Errors Induced by Pointing Uncertainties

In this paper a sea surface radar echo spectral analysis technique to correct for the rainfall velocity error caused by radar-pointing uncertainty is presented. The correction procedure is quite straightforward when the radar is observing a homogeneous rainfall field. When nonuniform beam filling (NUBF) occurs and attenuating frequencies are used, however, additional steps are necessary in order to correctly estimate the antenna-pointing direction. This new technique relies on the application of the combined frequency-time (CFT) algorithm to correct for uneven attenuation effects on the observed sea surface Doppler spectrum. The performance of this correction technique was evaluated by a Monte Carlo simulation of the Doppler precipitation radar backscatter from high-resolution 3D rain fields (either generated by a cloud resolving numerical model or retrieved from airborne radar measurements). The results show that the antenna-pointing-induced error can, indeed, be reduced by the proposed technique in order to achieve 1 m s(exp -1) accuracy on rainfall vertical velocity estimates.

remote sensing↗
NASA NTRS2011

Antenna Near-Field Probe Station Scanner

A miniaturized antenna system is characterized non-destructively through the use of a scanner that measures its near-field radiated power performance. When taking measurements, the scanner can be moved linearly along the x, y and z axis, as well as rotationally relative to the antenna. The data obtained from the characterization are processed to determine the far-field properties of the system and to optimize the system. Each antenna is excited using a probe station system while a scanning probe scans the space above the antenna to measure the near field signals. Upon completion of the scan, the near-field patterns are transformed into far-field patterns. Along with taking data, this system also allows for extensive graphing and analysis of both the near-field and far-field data. The details of the probe station as well as the procedures for setting up a test, conducting a test, and analyzing the resulting data are also described.

Zaman, Afroz J.↗
NASA NTRS2010

E-Control: First Public Release of Remote Control Software for VLBI Telescopes

Automating and remotely controlling observations are important for future operations in a Global Geodetic Observing System (GGOS). At the Geodetic Observatory Wettzell, in cooperation with the Max-Planck-Institute for Radio Astronomy in Bonn, a software extension to the existing NASA Field System has been developed for remote control. It uses the principle of a remotely accessible, autonomous process cell as a server extension for the Field System. The communication is realized for low transfer rates using Remote Procedure Calls (RPC). It uses generative programming with the interface software generator idl2rpc.pl developed at Wettzell. The user interacts with this system over a modern graphical user interface created with wxWidgets. For security reasons the communication is automatically tunneled through a Secure Shell (SSH) session to the telescope. There are already successful test observations with the telescopes at O Higgins, Concepcion, and Wettzell. At Wettzell the software is already used routinely for weekend observations. Therefore the first public release of the software is now available, which will also be useful for other telescopes.

Neidhardt, Alexander↗
NASA NTRS2011

Fast Numerical Methods for the Design of Layered Photonic Structures with Rough Interfaces

Modified boundary conditions (MBC) and a multilayer approach (MA) are proposed as fast and efficient numerical methods for the design of 1D photonic structures with rough interfaces. These methods are applicable for the structures, composed of materials with arbitrary permittivity tensor. MBC and MA are numerically validated on different types of interface roughness and permittivities of the constituent materials. The proposed methods can be combined with the 4x4 scattering matrix method as a field solver and an evolutionary strategy as an optimizer. The resulted optimization procedure is fast, accurate, numerically stable and can be used to design structures for various applications.

Komarevskiy, Nikolay↗
NASA NTRS2018

Robust Metric-Aligned Quad-Dominant Meshing Using L(sub p) Centroidal Voronoi Tessellation

We introduce a meshing algorithm that can be used to both generate and adapt meshes for bounded domains in an anisotropic manner. This is particularly beneficial when anisotropic flow features like shock waves or contact discontinuities are present in the computational domain. The algorithm presented in this paper is based upon meshing under the imposed Riemannian metric tensor, which controls the orientation and size of the mesh elements. In this way there is no need for user intervention to recognize these features. We demonstrate that the method indeed aligns the elements with the underlying metric and produces right-angled simplices that can be recombined into quadrilateral elements. The aim is to eventually incorporate this meshing strategy in the monolithic high-order spectral element solver that is currently being developed at NASA Ames. This paper has two main contributions: First, we demonstrate that we can generate quad-dominant metric-aligned meshes for bounded domains using a generalized form of L(sub p)-Centroidal Voronoi Tessellation (L(sub p)-CVT). Unlike previous works, we do not rely on a background mesh and discretize the bounded domain in a hierarchical way by first discretizing the boundaries and then the volume using the underlying metric. Second, we present an alternative for clipping the Voronoi cells on the boundary, which is common practice in CVT-based meshing algorithms, by reconstructing the Voronoi cells using the defined metric field. In this way we avoid the geometrical complexity of the clipping procedure and we show that we evaluate the energy and its gradient correctly. We show that the reconstruction of the computational domain is consistent with the Lloyds’ algorithm that is used to compute the L(sub p)-CVT.

Centroidal↗
DOE OSTI2021

Simulating Large PEPs Tensor Networks on Small Quantum Devices

We systematically map low bond dimension PEPs tensor networks to quantum circuits. By measuring and reusing qubits, we are in principle able to simulate an N×M square lattice PEPs network (for arbitrary M) of bond dimension 2 using N+ 2 qubits. We then seek to determine if this mapping can yield useful values for long-range loop observables in the presence of quantum device noise in the topological Wen plaquette model by mapping a 3×3 PEPs tensor network to a 5-qubit quantum circuit and executing it on the Honeywell System Model H1-1 trapped-ion device. We find that, for this system size, the noisy observable values are indeed sufficient for diagnosing topological vs. trivial order as the Wen model is perturbed by a magnetic field term in the Hamiltonian. We provide an overview of the experimental procedure and its results. We then explain in greater detail our method for mapping 2D tensor networks to quantum circuits and its scaling properties. This serves as a proof-of-concept of the utilty of the measure-and-reuse approach for simulating large 2D quantum systems on small quantum devices.

MacCormack, Ian↗
DOE OSTI2013

Spectrometer Optics Calibration for Jefferson Lab $ g_2^ p $ Experiment

The proton spin-dependent structure function gp2 in the resonance region has been measured in a recent experiment at Jefferson Lab's Hall A. The goal of this experiment is to determine the gp2 structure function in the Q2 region of 0.02-0.20 GeV2 by using a transversely polarized NH3 target. The Hall A High Resolution Spectrometers (HRS) were used to provide an inclusive measurement of scattered electrons at 5.69 deg. A pair of septum magnets were used to bend the 5.69 deg scatted electrons into the 12.5 deg spectrometers. A full optics calibration of the spectrometer is required to extract the kinematic quantities at the interaction vertex. However, the calibration procedure is challenging due to the complications from the strong transverse target field (2.5 T and 5.0 T) and the varied field configurations of the septum magnets. The details of the optics calibration and the progress will be described in this talk.

Gu, Chao↗