Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FUSELAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Simulation of Lift plus Cruise Vehicle Models to Define a Full-Scale Crash Test Campaign

A series of dynamic simulations were completed on the National Aeronautics and Space Administration(NASA) Lift plus Cruise (LPC) concept electric Vertical Take-off and Landing (eVTOL) vehicle in preparation for an anticipated future full-scale crash-test campaign. The crash test campaign is envisioned as a data gathering exercise with an intent generating full-scale test data to inform eVTOL crashworthiness regulations, evaluate the use of energy absorbing concepts within vehicle design, and validate finite element modeling techniques used in crashworthiness predictions. This report discusses the two main objectives for the simulation efforts: the development of a structural cabin section, and a series of analyses utilized to determine the sensitivities of impact variables. A structural cabin section was created based from previous research efforts involving the LPC vehicle utilized for occupant response. To refine for the structural modifications, the wing and tail sections of the vehicle were removed. The tail was replaced with a representative mass at the aft of the fuselage. The overhead wing was replaced with a beam structure sized to approximate the bending response of the wing under crash loading conditions. The beam structure was fixed to the fuselage similar to the original Wingbox design in order to properly capture effects of this overhead mass on survivable volume within the vehicle. The fidelity of the fuselage frame structure within the FEM was increased to quantify the effect of frame sizing on structural response. From this an eVTOL test article design was developed, which satisfied basic crashworthiness requirements, was reconfigurable to assess the effect of various design avenues on structural response and optimized to improve manufacturability. The impact variable sensitivity results primarily show the orientation of the impact vector played a major role in types of injuries sustained, along with their severity. The vehicle was largely insensitive to small variations in pitch attitude but highly sensitive to both impact surface at certain angles and landing gear location.

eVTOL↗

Updated Assessment of Turboelectric Boundary Layer Ingestion Propulsion Applied to a Single-Aisle Commercial Transport

Recent advances in technology and a push for more environmentally friendly air transportation has led to interest in electrified aircraft propulsion (EAP). EAP encompasses many different propulsion system architectures which can also enable new, synergistic propulsion-airframe integration approaches. This report evaluates the combination of turboelectric EAP and fuselage boundary layer ingestion (BLI) propulsion in a concept called “STARC-ABL.” The predicted fuel consumption benefits of STARC-ABL are updated from a prior 2016 study with new mission requirements and analysis methodologies. Additionally, certification noise is added to the concept evaluation. To properly assess the impact of EAP, a new concept, “ST-ABL,” is developed for comparison which includes the fuselage BLI propulsor driven mechanically instead of by a turboelectric system. STARC-ABL is predicted to provide a 3.4% reduction in fuel consumption for a single-aisle class, 3500 nmi design mission and a 2.7% reduction for a 900 nmi mission, both relative to an advanced technology conventional aircraft. STARC-ABL is also predicted to have a Chapter 14 cumulative noise margin of 7 EPNdB. The non-EAP ST-ABL concept results in slightly higher fuel consumption and noise than STARC-ABL, indicating that the turboelectric system provides benefits over the mechanical drive approach to fuselage BLI. Areas for future research and evolution of the concept include assessing its applicability to other aircraft sizes, increasing the fidelity of BLI and electric component modeling, and investigating other EAP architecture options.

BLI↗

Conceptual Exploration of Aircraft Configurations for the SUSAN Electrofan

This paper presents an aircraft configuration trade space exploration for NASA’s SUbsonicSingle Aft eNgine (SUSAN) Electrofan, which is a 180 passenger regional class transport aircraftthat utilizes electrified aircraft propulsion and advanced propulsion airframe integrationtechnologies to enable reduced fuel consumption and emissions. At its core is a hydrocarbonfuel-consuming aft fuselage propulsor that produces 35% of the total thrust while generatingpower to drive wing-mounted electric propulsors, which produce the remaining 65% thrust.This power is extracted from the aft fuselage propulsor via a set of generators and is managedwith the help of a rechargeable battery, classifying the propulsion system as hybrid electric.Investigated in this work are different aft fuselage propulsor concepts, several wing propulsorconfigurations, and different types of stability and control strategies that can be accommodatedby this hybrid electric system architecture, with an emphasis on aircraft performance. Resultsobtained using a low-order multidisciplinary design and analysis framework demonstrate thateven with a subset of the advanced technologies that are being considered for the SUSANElectrofan, significant improvements to fuel efficiency can be achieved.

CAS↗

A Comparative Analysis of Occupant Response Between Component and Full Vehicle Tests of Fokker F28 Aircraft Hardware

In 2019, the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) conducted a full-scale crash test of a Fokker F28 MK1000 aircraft. This test concluded a multi-year research effort in which two component fuselage sections of a matching Fokker F28 aircraft were previously tested under similar vertical impact conditions. Due to facility and cost constraints of full-scale testing, aircraft are typically evaluated through component level tests (i.e. vertical drops of fuselage subsections or isolated seat tests). Although more practical, these tests are limited in their ability fully replicate the complex multi-axis loading environment induced on the occupants during a full-aircraft crash event. Because of this, there is risk that component level testing does not provide a complete assessment of vehicle crashworthiness. Comparative analysis between full-scale and component level testing of the Fokker F28 aircraft provides an excellent opportunity to evaluate differences in crashworthiness prediction made between these levels of test fidelity. In this study, Anthropomorphic Test Device (ATD, a.k.a crash test dummies) responses measured during the Fokker full scale impact test were compared to those measured in the component fuselage section drops. A variety of ATD configurations (5th, 50th, 95th) and positions (upright, braced) were tested in both the full-scale and component tests. ATD injury metric response comparisons were made across these ATD variations in addition to comparisons made with respect to ATD location within the vehicle. Results found the addition of horizontal impact velocity, achieved in the full-scale testing, along with aircraft structural effects altered ATD based crashworthiness assessment of the vehicle.

Crashworthiness↗

Simulation and Analysis of NASA Lift Plus Cruise eVTOL Crash Test

The National Aeronautics and Space Administration (NASA) will perform a full-scale crash test of a representative electric vertical take-off and landing (eVTOL) fuselage in November 2022. The test article is a carbon-composite fuselage cabin section of the six-passenger lift plus cruise (LPC) eVTOL design concept which was created by NASA to advance understanding of eVTOL propulsion, noise, and safety. The test will consist of impacting the fuselage cabin section onto a concrete surface with a combined horizontal and vertical velocity approximating a severe but survivable crash landing for this vehicle design. Data generated from this test will be used to inform eVTOL crashworthiness regulation development, evaluate the use of energy absorbing concepts within vehicle design, and validate finite element model (FEM) techniques used in crashworthiness predictions. The cabin section response will be evaluated using structural instrumentation, anthropometric test devices (ATDs), and high-speed photogrammetry. This study will compare pre-test FEM predictions to test results to quantify the capability of these tools to predict crashworthiness of the carbon-composite eVTOL airframe.

Crashworthiness↗

Simulation and Analysis of NASA Lift Plus Cruise eVTOL Crash Test

The National Aeronautics and Space Administration (NASA) will perform a full-scale crash test of a representative electric vertical take-off and landing (eVTOL) fuselage in November 2022. The test article is a carbon-composite fuselage cabin section of the six-passenger lift plus cruise (LPC) eVTOL design concept which was created by NASA to advance understanding of eVTOL propulsion, noise, and safety. The test will consist of impacting the fuselage cabin section onto a concrete surface with a combined horizontal and vertical velocity approximating a severe but survivable crash landing for this vehicle design. Data generated from this test will be used to inform eVTOL crashworthiness regulation development, evaluate the use of energy absorbing concepts within vehicle design, and validate finite element model (FEM) techniques used in crashworthiness predictions. The cabin section response will be evaluated using structural instrumentation, anthropometric test devices (ATDs), and high-speed photogrammetry. This study will compare pre-test FEM predictions to test results to quantify the capability of these tools to predict crashworthiness of the carbon-composite eVTOL airframe.

Crashworthiness↗

Enhancements to Overset Methods for Achieving Higher Accuracy and Solution Convergence: Preprint

Overset methods, when utilized within a multi-solver framework, provide a very flexible and powerful toolset for analyzing moving body problem. However, many overset framework suffer from several deficiencies such as (1) convergence degradation of the non-linear iterative schemes (2) difficulty in achieving higher-order accuracy and (3) high computational costs over long simulation times. In this work, we explore approaches that mitigate these deficiencies and provide a pathway for improved accuracy and fidelity of overset methods. A high-order, discontinuous Galerkin solver is integrated into an existing overset framework and applied to an unsteady ROBIN fuselage case. For convergence acceleration, an Overset-GMRES linear solver with a timestep controller is applied to a DLR-F6 aircraft steady simulation and an unsteady, notional rotor-fuselage. Finally the same rotor-fuselage case as well as the JVX rotor/wing case is simulated using a reduced-order aerodynamic model.

aerospace↗

Longitudinal Stability Characteristics of a 42 Degree Sweptback Wing and Tail Combination at a Reynolds Number of 6.8 x 10(exp 6)

Results are given of a wind-tunnel investigation at a Reynolds number of 6.8 x 10(exp 6) to determine the static longitudinal stability characteristics of a 42 degree sweptback wing and fuselage combination with a sweptback horizontal tail. Included are the effects of vertical position of fuselage and tail with respect to wing for several combinations of high-lift and staff-control devices. Also included is the effect of a simulated ground.

FLAPS - COMPLETE WINGS↗

DESIGN AND TEST EXPERIENCES WITH INSTABILITY OF MAJOR AIRFRAME COMPONENTS

Two test incidents involving instability of large scale commercially built structures are described. Two classes of structure are discussed; the first, a fuselage with skin designed to buckle at low stress, and the second, a wing whose surface remains unbuckled to failure. The structure in the region of failure is defined and the failures described and illustrated. Insofar as possible, the stresses in the critical area at the time of failure are reported and compared to strength determined by analysis. Both fuselage and wing surfaces were observed to fail in the mode of a medium range column when adequate support was provided by ribs and frames. Initial failure in the wing example was premature due to a design deficiency in rib strength. A clear illustration is given of the effect of rib stiffness on wing surface stability. Adding stiffness to wing ribs increases the limit of surface stability to the theoretical flat panel value.

SHELL STABILITY↗

Comparison of Experimental and Theoretical Zero-Lift Wave-Drag Results for Various Wing-Body-Tail Combinations at Mach Numbers up to 1.9

Comparisons are made of experimental and theoretical zero-lift wave drag for several nose shapes, wing-body combinations, and models of current airplanes at Mach numbers up to 1.0. The experimental data were obtained from tests in the Ames 6- by6-foot supersonic wind tunnel and at the NACA Wallops Island facility. The theoretical drag was found by use of linear theory utilizing model area distributions. The agreement between theoretical and experimental zero-lift wave-drag coefficients was generally very good, especially for a fuselage or for fuselage-wing combinations that were vertically symmetrical. For other models that had rapid changes in body shape and/or were not vertically symmetrical, the agreement of theory with experiment ranged from fair to poor, depending on the severity of the change in shape.

DRAG COEFFICIENT↗

A numerical method for computing three dimensional viscous supersonic flow fields about slender bodies

A numerical method is presented for the calculation of steady, three-dimensional, viscous, compressible flow fields about slender bodies at angle of attack and at supersonic speeds. Approximations are introduced in modeling the flow in the longitudinal direction. Accordingly, the flow fields calculated with the program were computed with a model that permits viscous crossflow together with inviscid axial flow. An analysis of the errors introduced by such a treatment is presented. Numerical calculations were made and compared with experimental results for an ogive-cylinder and an airplane fuselage configuration. Generally, good agreement with experiment was obtained. However, boundary layer separation and body vortex positions differed from experimental locations on the ogive-cylinder, and the shock induced by the fuselage canopy was predicted at a slightly different location.

Walitt, L.↗

Large-scale wind-tunnel investigation of a V/STOL transport model with podded lift fans forward and aft of a low mounted wing

A configuration with outboard pod mounted front fans and rear fans located in the wing trailing-edge and fuselage juncture might have superior induced lift and variation of moment with airspeed. A large scale investigation of this type of configuration was conducted in 40- by 80-foot wind tunnel. The model used was a low wing transport representative of currently operating aircraft. Two lift fans were placed in pods forward of and below the wing with the fan centerline near mid semi-span. Two rear fans were mounted at the wing trailing-edge close to the fuselage with the fan rotor in the wing chord plane. Fan performance was measured statically and with forward speed, and longitudinal aerodynamic characteristics were obtained with the fans operating at various tip-speed ratios.

Hall, L. P.↗

Aerodynamic characteristics of a six-jet V/STOL configuration with four swing-out lift jets in the transition speed range

A wind-tunnel investigation has been made of the longitudinal aerodynamic characteristics and jet-interference effects of a model of a jet V/STOL variable-sweep fighter airplane that employs four direct-lift engines which swing out from the fuselage and two lift-cruise engines located in the rear part of the fuselage. Data were obtained with two wing areas for various forward speeds and power conditions in the transition speed range. The data are presented without analysis or discussion.

Carter, A. W.↗

Effects of ground proximity on the aerodynamic characteristics of a six-jet V/STOL configuration with four swing-out lift jets

A wind-tunnel investigation has been made of the effects of ground proximity on the longitudinal and lateral-directional aerodynamic characteristics and jet-interference effects of a model of a jet V/STOL variable-sweep fighter airplane that employs four direct-lift engines which swing out from the fuselage ahead of the wing and two lift-cruise engines located in the rear part of the fuselage. Data were obtained through a range of angles of attack and sideslip at simulated speeds from hover through transition at various heights of the model above a moving-belt ground plane. Power-off data and power-on data at several power conditions are presented. The data are presented without analysis or discussion.

Carter, A. W.↗

Flight-determined characteristics of an air intake system on an F-111A airplane

Flow phenomena of the F-111A air intake system were investigated over a large range of Mach number, altitude, and angle of attack. Boundary-layer variations are shown for the fuselage splitter plate and inlet entrance stations. Inlet performance is shown in terms of pressure recovery, airflow, mass-flow ratio, turbulence factor, distortion factor, and power spectral density. The fuselage boundary layer was found to be not completely removed from the upper portion of the splitter plate at all Mach numbers investigated. Inlet boundary-layer ingestion started at approximately Mach 1.6 near the translating spike and cone. Pressure-recovery distribution at the compressor face showed increasing distortion with increasing angle of attack and increasing Mach number. The time-averaged distortion-factor value approached 1300, which is near the distortion tolerance of the engine at Mach numbers above 2.1.

Hughes, D. L.↗

Space shuttle orbiter reentry flow field and heating analysis

The reentry flow field and thermal environment around the straight wing shuttle orbiter vehicle were determined. Both rarefied and continuum flow fields and associated heating rates on various configurations representative of the orbiter at high angle of attack were calculated. Rarefied flow fields and heating rates were computed by the Monte Carlo direct simulation technique for altitudes above 82.3 km. Continuum inviscid flow fields were calculated by 2-D unsteady and 3-D steady finite difference/artificial viscosity methods and also by a 2-D shock layer analysis technique. Viscous flow fields and heating rates in the continuum regime were computed by a boundary layer integral matrix method for laminar flow and by an aerodynamic surface heating technique for turbulent flow. Shapes considered in the study included flat plates (representing the underside of the orbiter fuselage or the wing MAC), orbiter fuselage cross sections, orbiter wing airfoils, and 3-D orbiter configurations, all at high angle of attack (40 - 60 deg). The theoretical results showed good agreement with measured pressure and heat transfer data.

Rochelle, W. C.↗

Lee-side flow phenomena on space shuttle configurations at hypersonic speeds. Part 1: Flow separation and flow field viscous phenomena of a delta-wing shuttle orbiter configuration

Results of a pitot pressure investigation of the flow field on the lee side of a delta wing shuttle orbiter are presented. The results delineate the extent of the lee side separated flow and give a tentative cross sectional definition to the shock wave structure for angles of attack of 15 deg and 30 deg. It is shown that while, in general, the effects of Reynolds number on the flow field are not large, detailed effects are observed that may have significant bearing on the heating estimate. Two examples are cited for an angle of attack of 15 deg; these are: (1) The scope of the vertical tail exposed to the unseparated flow increases with increasing Reynolds number and (2) the depth of the separated flow adjacent ot where the bow wave crosses the wing appears to decrease with increasing Reynolds number. In addition, it is shown that at a spanwise station outboard of the wing-fuselage juncture, increasing Reynolds number decreased the pitot pressure in the unseparated flow. This defect of pitot pressure appears associated with the flow over the wing-fillet-fuselage juncture.

Cleary, J. W.↗

Aerothermodynamic measurements for space shuttle configuration in hypersonic wind tunnels

The effect of shuttle configuration geometry, angle of attack, and free stream flow conditions on the heat-transfer distribution as influenced by three-dimensional effects, the wing-fuselage shock-interaction, and resultant wing-impingement phenomena are examined. In addition, the data provided information regarding the flow field in the vicinity of the nose and boundary layer transition in the plane of symmetry of the fuselage. The data included measurements of the surface pressure, the heat transfer rate distributions, (using models instrumented with thermocouples and models painted with thermographic phosphor) and schlieren and shadowgraph photographs. Posttest photographs of the painted models supplemented the heat transfer data.

Bertin, J. J.↗