Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Transistor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Intrinsic delay of permeable base transistor

Permeable base transistors (PBTs) fabricated by vacuum deposition or solution process have the advantages of easy fabrication and low power operation and are a promising device structure for flexible electronics. Intrinsic delay of PBT, which characterizes the speed of the transistor, is investigated by solving the three-dimensional Poisson equation and drift-diffusion equation self-consistently using finite element method. Decreasing the emitter thickness lowers the intrinsic delay by improving on-current, and a thinner base is also preferred for low intrinsic delay because of fewer carriers in the base region at off-state. The intrinsic delay exponentially decreases as the emitter contact Schottky barrier height decreases, and it linearly depends on the carrier mobility. With an optimized emitter contact barrier height and device geometry, a sub-nano-second intrinsic delay can be achieved with a carrier mobility of ∼10 cm{sup 2}/V/s obtainable in solution processed indium gallium zinc oxide, which indicates the potential of solution processed PBTs for GHz operations.

36 MATERIALS SCIENCE↗

Increase of self-heating effects in nanodevices induced by surface roughness: A full-quantum study

We present a full-quantum approach to investigate self-heating effects in nanoelectronic devices and exploit it to simulate rough nanowire field-effect transistors. Self-heating is found to significantly contribute (up to about 16%) to the degradation of the transistor performances, with an impact that is stronger for stronger roughness. The mechanism at the origin of the enhanced backscattering is the temperature increase due to the thermal conductivity reduction and the consequent increase of electron-phonon coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Smaller, faster, tougher

Silicon has long been the semiconductor of choice for such power electronics. But soon this ubiquitous substance will have to share the spotlight. Devices made from silicon carbide (SiC)-a faster, tougher, and more efficient alternative to straight silicon-are beginning to take off. Simple SiC diodes have already started to supplant silicon devices in some applications. And over the last few years, they've been joined by the first commercially available SiC transistors, enabling anew range of SiC-based power electronics. What's more, SiC wafer manufacturers have steadily reduced the defects in the material while increasing the wafer size, thus driving down the prices of SiC devices. Last year, according to estimates made by wafer maker Cree, the global market for silicon carbide devices topped US $100 million for the first time.

36 MATERIALS SCIENCE↗

Strain-insensitive intrinsically stretchable transistors and circuits

An all-elastomer strain engineering approach, which uses patterned elastomer layers with tunable stiffnesses, can be used to create intrinsically stretchable transistor arrays with a device density of 340 transistors cm -2 and strain insensitivity of less than 5% performance variation when stretched to 100% strain. Intrinsically stretchable electronics can form intimate interfaces with the human body, creating devices that could be used to monitor physiological signals without constraining movement. However, mechanical strain invariably leads to the degradation of the electronic properties of the devices. Here we show that strain-insensitive intrinsically stretchable transistor arrays can be created using an all-elastomer strain engineering approach, in which the patterned elastomer layers with tunable stiffnesses are incorporated into the transistor structure. By varying the cross-linking density of the elastomers, areas of increased local stiffness are introduced, reducing strain on the active regions of the devices. This approach can be readily incorporated into existing fabrication processes, and we use it to create arrays with a device density of 340 transistors cm -2 and a strain insensitivity of less than 5% performance variation when stretched to 100% strain. We also show that it can be used to fabricate strain-insensitive circuit elements, including NOR gates, ring oscillators and high-gain amplifiers for the stable monitoring of electrophysiological signals.

42 ENGINEERING↗

Evaluation of the DC bus link capacitors and power transistor modules in the qualification testing of PV inverters

To achieve useful, fair, and cost-effective design qualification and type approval testing for PV inverters, two procedures were developed and demonstrated to evaluate the bus link capacitors and power transistor—and where applicable, its module—for long-term reliability. We evaluate the inverter under simulated use conditions with heat run tests to find the highest operating temperatures reached by these components. The procedures are demonstrated in this study with a 4-kVA class string inverter. The maximum temperature of the DC bus link capacitors was determined to be 76.4°C when the ambient temperature was at the inverter's maximum rated temperature of 60°C with derating occurring. On the other hand, the power transistor module's maximum temperature using the heat sink temperature as the index, 92.6°C, occurred in an ambient of 40.8°C when derating was not occurring. The conditions found for upper temperatures exhibited by these components are, respectively, proposed for implementation in the dry heat and thermal cycling tests in the IEC 62093 “Power conversion equipment for photovoltaic systems – Design qualification testing” international standard draft so that the levels applied in the tests are in proportion to those experienced in the field. Finally as a result, fairer evaluation of inverter reliability is realized.

14 SOLAR ENERGY↗

Probing Biomolecular Interactions with Gold Nanoparticle-Decorated Single-Walled Carbon Nanotubes

Hybrid nanomaterials comprising metal–graphitic interfaces are uniquely suitable to probe molecular interactions and the associated phenomena such as charge transfer and adsorbate spillover effects. In this paper, we study the modulation of the electronic and chemical properties of gold nanoparticle-decorated single-walled carbon nanotubes (SWCNT) using Raman spectroscopy and measurements of field-effect transistor (FET) characteristics. SWCNT are extremely sensitive to changes in the local electronic environment and therefore gold-analyte interactions may be probed both through changes in FET characteristics (as an electrical transducer) and in surface-enhanced Raman scattering (as a chromophore). We study these changes both experimentally and theoretically in order to elucidate the electronic structure of complex nanocomposites, and the information gathered from these experiments is applied to the study of biomolecular interactions with gold nanoparticle-decorated SWCNT. Lastly, this study, in addition to providing deeper understanding of metal–graphitic interfaces, will offer a combined approach to SWCNT biosensing methodology based on the dual monitoring of the FET–Raman characteristics, which we demonstrate through detection of glutathione.

36 MATERIALS SCIENCE↗

Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching

Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.

Organic polymers↗

Characteristics of rf H{sup -} Ion Source by Using FET Power Source

Characteristics of radio frequency(rf) plasma production are investigated using a FET inverter power supply as an rf generator. The matching circuit in the inverter system is simple compared to a conventional 50 Ohm matching system and only an imaginary part of the impedance of rf transmission should be matched by adjusting operating frequency or capacitance of the circuit. An electron density over 10{sup 18} m{sup -3} is produced in argon plasma with 1 kW rf power. Lower densities are obtained in helium and hydrogen plasmas compared to the argon plasma. Effect of axial magnetic field in driver region is examined. Electron density more than 10{sup 18} m{sup -3} is obtained at the hydrogen gas pressure around 1 Pa with the help of the axial magnetic field.

43 PARTICLE ACCELERATORS↗

Photo-response of a P3HT:PCBM blend in metal-insulator-semiconductor capacitors

Metal-insulator-semiconductor capacitors are investigated, in which the insulator is cross-linked polyvinylphenol and the active layer a blend of poly(3-hexylthiophene), P3HT, and the electron acceptor [6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PCBM). Admittance spectra and capacitance-voltage measurements obtained in the dark both display similar behaviour to those previously observed in P3HT-only devices. However, the photo-capacitance response is significantly enhanced in the P3HT:PCBM case, where exciton dissociation leads to electron transfer into the PCBM component. The results are consistent with a network of PCBM aggregates that is continuous through the film but with no lateral interconnection between the aggregates at or near the blend/insulator interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First multicharged ion irradiation results from the CUEBIT facility at Clemson University

A new electron beam ion trap (EBIT) based ion source and beamline were recently commissioned at Clemson University to produce decelerated beams of multi- to highly-charged ions for surface and materials physics research. This user facility is the first installation of a DREEBIT-designed superconducting trap and ion source (EBIS-SC) in the U.S. and includes custom-designed target preparation and irradiation setups. An overview of the source, beamline, and other facilities as well as results from first measurements on irradiated targets are discussed here. Results include extracted charge state distributions and first data on a series of irradiated metal-oxide-semiconductor (MOS) device targets. For the MOS devices, we show that voltage-dependent capacitance can serve as a record of the electronic component of ion stopping power for an irradiated, encapsulated oxide target.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On-Chip Batteries as Distributed Energy Sources in Heterogeneous 2.5D/3D Integrated Circuits

Energy efficiency in digital systems faces challenges due to the constraints imposed by small-scale transistors. Moreover, the growing demand for portable consumer electronics necessitates the use of compact energy sources. To address these challenges, heterogeneous 3D IC technology has emerged as a promising solution for the former. Regarding the latter, we propose the concept of distributed batteries within a heterogeneous 3D IC. This approach involves utilizing multiple smaller batteries with different specifications among different modules of 3D ICs. This approach optimizes performance and overcomes limitations associated with both 3D ICs and conventional power delivery methods. Distributed batteries play a vital role in effectively managing the heat generated by energy sources and modules within a 3D IC. Furthermore, they contribute to achieving a uniform distribution of heat throughout the entire structure, which ultimately ensures the optimal performance of the batteries and modules. The simulation results indicate a 40 percent enhancement in achieving a more even distribution of generated heat. Additionally, the proposed distributed battery techniques improve power delivery, enhance reliability, and enable optimized voltage regulation while improving efficiency. In addition to the primary benefits, alternative configurations of the proposed approach can offer extra energy storage capacity and act as efficient electromagnetic shields, resulting in an impressive reduction of external electromagnetic noises by 60 dB.

47 OTHER INSTRUMENTATION↗

Design of an ultra low power CMOS pixel sensor for a future neutron personal dosimeter

Despite a continuously increasing demand, neutron electronic personal dosimeters (EPDs) are still far from being completely established because their development is a very difficult task. A low-noise, ultra low power consumption CMOS pixel sensor for a future neutron personal dosimeter has been implemented in a 0.35 {mu}m CMOS technology. The prototype is composed of a pixel array for detection of charged particles, and the readout electronics is integrated on the same substrate for signal processing. The excess electrons generated by an impinging particle are collected by the pixel array. The charge collection time and the efficiency are the crucial points of a CMOS detector. The 3-D device simulations using the commercially available Synopsys-SENTAURUS package address the detailed charge collection process. Within a time of 1.9 {mu}s, about 59% electrons created by the impact particle are collected in a cluster of 4 x 4 pixels with the pixel pitch of 80 {mu}m. A charge sensitive preamplifier (CSA) and a shaper are employed in the frond-end readout. The tests with electrical signals indicate that our prototype with a total active area of 2.56 x 2.56 mm{sup 2} performs an equivalent noise charge (ENC) of less than 400 e - and 314 {mu}W power consumption, leading to a promising prototype. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation Effects on Electronics: How to Destroy a Satellite in Three Easy Steps [Slides]

This report contains a set of slides intended for a summer school at Los Alamos National Laboratory (LANL). On the topic of radiation effect on electronics, this presentation provides a brief overview of transistors and discusses Total Ionizing Dose (TID), Displacement Damage (DD) or Total Non-ionizing Dose (TNID), and Single-Event Effects (SEEs) in relation to radiation effects for satellites.

42 ENGINEERING↗

Engineering Mechanics Division

Screening methods for metal oxide semiconductor field effect transistors and resistors, impact survival testing of spacecraft electronic parts, and parachute jettisoning from planetary capsules

Source record↗

Fabrication of a Thermally Isolated and Pre-amplified Transistor Module with Polyimide Micro-wires for Cryogenic Detectors

For use in cryogenic applications such as bolometer and x-ray microcalorimeter arrays, pre-amplifying Junction Field Effect Transistors (JFETs) are often required for the readout electronics. The optimum operating temperature of the JFETs is 130 Kelvin while the cryogenic detectors operate in the milli-Kelvin range. Thus, the JFETs must be heated up but thermally isolated from the surrounding cryogenic instruments. In the past, the thermal isolation was accomplished by suspending the JFETs with low conductance wires such as manganium or stainless steel on a Kevlar support platform [I]. This also achieved electrical connections. However, this assembly required manual soldering work, which could raise a reliability issue for the cryogenic applications. In order to eliminate the manual work, polyimide micro-wires were developed [2]. The wires must be of sufficient length to decrease the heat load and in tension to prevent microphonic noise from vibration of the wires: the polyimide wires were patterned into llS"shaped curves over a thin metal wires such as aluminum, titanium, or niobium. The bilayer of the films were then suspended by etching silicon substrate thus to make freestanding air bridges (enough explanation?). In this paper, we present a method to fabricate micromachined JFET mechanical modules suspended by polyimide Pyraline micro-wires and heated up with built-in aluminum micro-heaters.

Oh, L. H.↗

Towards Prognostics of Power MOSFETs: Accelerated Aging and Precursors of Failure

This paper presents research results dealing with power MOSFETs (metal oxide semiconductor field effect transistor) within the prognostics and health management of electronics. Experimental results are presented for the identification of the on-resistance as a precursor to failure of devices with die-attach degradation as a failure mechanism. Devices are aged under power cycling in order to trigger die-attach damage. In situ measurements of key electrical and thermal parameters are collected throughout the aging process and further used for analysis and computation of the on-resistance parameter. Experimental results show that the devices experience die-attach damage and that the on-resistance captures the degradation process in such a way that it could be used for the development of prognostics algorithms (data-driven or physics-based).

Celaya, Jose R.↗