Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

The effect of boron doping on crystal structure, magnetic properties and magnetocaloric effect of DyCo 2

In this study, the magnetic properties and magnetic entropy changes of DyCo 2 B x (x=0, 0.05, 0.1, and 0.2) alloys were investigated. The Curie temperature (TC) increases with increasing B concentration. The frequency dependence of ac magnetic susceptibility of DyCo 2 caused by the narrow domain wall pinning effect is depressed by B doping, but the coercivity and the magnetic viscosity are prominently increased in the B doped alloys. The magnetic transition nature of DyCo 2 B x changes from the first-order to the second-order with increasing x, which leads to the decrease of the maximum magnetic entropy change. However, the relative cooling power (RCP) of DyCo 2 and the B doped alloys remains nearly constant.

36 MATERIALS SCIENCE↗

In-situ TEM/heavy ion irradiation on ultrafine-and nanocrystalline-grained tungsten: Effect of 3 MeV Si, Cu and W ions

Plasma facing components for future fusion applications will experience helium- and neutron-induced structural damage. Direct observation of the in-situ dynamic response of such components during particle beam exposure assists in fundamental understanding of the physical phenomena that give rise to their irradiation resistance. We investigated the response of ultrafine and nanocrystalline-grained tungsten to 3 MeV heavy ion irradiations (Si{sup 2} {sup +}, Cu{sup 3} {sup +} and W{sup 4} {sup +}) for the simulation of neutron-induced damage through transmutation reactions via in-situ ion irradiation–transmission electron microscopy experiments. Defect densities as a function of irradiation dose (displacement per atom) and fluence were studied. Four stages of defect densities evolution were observed, as a function of irradiation dose: 1) increase in defect density at lower doses, 2) higher defect production rate at the intermediate doses (before saturation), 3) reaching the maximum value, and 4) drop of the defect density in the case of W{sup 4} {sup +}, possibly due to defect coalescence and grain boundary absorption of small defect clusters. The effect of grain size on defect densities was investigated and found that defect densities were independent of grain size in the ultrafine and nanocrystalline region (60–400 nm). These results were compared to other heavy ion irradiation studies of structural materials. - Graphical abstract: Bright-field TEM micrographs and defect densities of UF and NC tungsten grains irradiated with a) Si{sup +} {sup 2} at 1.03 dpa: 1) 140 nm — 7.2 × 10{sup −} {sup 3} defects/nm{sup 2}, 2) 122 nm — 6.9 × 10{sup −} {sup 3} defects/nm{sup 2}, 3) 63 nm — 4.7 × 10{sup −} {sup 3} defects/nm{sup 2}, and 4) 367 nm — 6.4 × 10{sup −} {sup 3} defects/nm{sup 2}; b) Cu{sup +} {sup 3} to 3.79 dpa: 1) 228 nm — 4.3 × 10{sup −} {sup 3} defects/nm{sup 2}; 2) 202 nm — 5.9 × 10{sup −} {sup 3} defects/nm{sup 2}; and 3) 137 nm — 6.1 × 10{sup −} {sup 3} defects/nm{sup 2}; and c) W{sup +} {sup 4} to 5.72 dpa: 1) 372 nm — 2.3 × 10{sup −} {sup 3} defects/nm{sup 2} and 2) 128 nm — 4.5 × 10{sup −} {sup 3} defects/nm{sup 2}. - Highlights: • Heavy ion irradiations were performed on UF and NC grained tungsten. • Irradiations were performed with 3 MeV (Si{sup 2} {sup +}, Cu{sup 3} {sup +} and W{sup 4} {sup +}) ions at RT. • Defect density vs. dpa demonstrated four different stages in the case of W{sup 4} {sup +} irradiation. • Defect coalescence and absorption by the grain boundaries were observed after a dose of 3 dpa during W{sup 4} {sup +} irradiation. • No correlation existed between the grain width and the defect density for the UF and NC region.

36 MATERIALS SCIENCE↗

Measurements of the chiral magnetic effect with background isolation in 200 GeV Au+Au collisions at STAR

Using two novel methods, pair invariant mass (m inv ) and comparative measurements with respect to reaction plane (Ψ RP ) and participant plane (Ψ PP ), we isolate the possible chiral magnetic effect (CME) from backgrounds in 200 GeV Au+Au collisions at STAR. The invariant mass method identifies the resonance background contributions, coupled with the elliptic flow (ν 2 ), to the charge correlator CME observable (Δγ). At high mass (m inv > 1.5 GeV/c 2 ) where resonance contribution is small, we obtain the average Δγ magnitude. In the low mass region (m inv > 1.5 GeV/c 2 ), resonance peaks are observed in Δγ(m inv ). An event shape engineering (ESE) method is used to model the background shape in m inv to extract the potential CME signal at low m inv . In the comparative method, the Ψ RP is assessed by spectator neutrons measured by the ZDCs, and the Ψ PP by the 2 nd -harmonic event plane measured by the TPC. The ν 2 is stronger along Ψ PP and weaker along Ψ RP ; in contrast, the magnetic field, mainly from spectator protons, is weaker along Ψ PP and stronger along Ψ RP . As a result, the Δγ measured with respect to Ψ RP and Ψ PP contain different amounts of CME and background, and can thus determine these two contributions. It is found that the possible CME signals with background isolation by these two novel methods are small, on the order of a few percent of the inclusive Δγ measurements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Block Length and Side Chain Length Ratios on Determining a Multicompartment Micelle Structure

Previous work has identified the importance of the lipophilic-fluorophilic block length ratio R l in predicting the morphology of linear lipophilic-hydrophilic-fluorophilic (hereafter referred to as BAC) micelle systems. Here, a generalized form R of this structural parameter is developed that makes no assumption of BAC triblock copolymer linearity, while still providing accurate predictions of micelle morphology. Here, the morphologies of BAC micelles formed by triblock copolymers with R <<1 or R >>1 have similar features, with the only notable difference being an inversion of the lipophilic and fluorophilic regions. A destabilization of the single-core micelle structure occurs as R approaches unity from either direction. Finally, the extent to which micelle morphology depends on polymer architecture instead of composition alone is examined, with decreased patchiness observed in BAC systems with very long block lengths. Through modification of both the R-value and the polymer architecture, the micelle morphology can be effectively tuned for use in immobilized catalysis and nanoreactor applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface vs Homogeneous Organo-Hafnium Catalyst Ion-Pairing and Ligand Effects on Ethylene Homo- and Copolymerizations

Heterogeneous catalysts have long dominated polyethylene and polypropylene production, but understanding their catalysis is challenged by uncertainties in active site structures and percentages. Surface-bound organometallic catalysts are an emerging strategy to combine successful homogeneous catalysts having well-understood structures, relatively high percentages of active sites, and exceptional control of selectivity, with the attractions of surface catalysts, to transition promising homogeneous systems to large-scale heterogeneous ones. Nevertheless, surface-bound olefin polymerization catalysts typically produce ultrahigh M w ’s but with low activity and comonomer selectivity. Here, we report the systematic synthesis and characterization of a series of pyridylamido–Hf complexes and their corresponding surface catalysts chemisorbed on sulfated alumina (AlS) and zirconia (ZrS). Comparative ethylene homo- and 1-octene copolymerizations reveal similar activity and 1-octene selectivity trends in the homogeneous and heterogeneous systems. For the surface pyridylamido–Hf catalyst series, large variations in activity (up to 10×) and 1-octene incorporation (up to 28×) are achieved by ligand and support manipulation. Interestingly, while the homogeneous catalysts exhibit positive comonomer effects in ethylene/1-octene copolymerization, the surface catalysts behave oppositely. Extended X-ray absorption fine structure (EXAFS) reveals significantly elongated Hf···O bond distances vs typical Hf–O covalent bonds (2.06 vs 1.97 Å). Furthermore, density functional theory (DFT) analysis of the heterolytic ion pair separation enthalpies, olefin insertion energetics, and NBO/Bader charges also suggest electrostatic Hf cation–anionic support binding and catalytic patterns, which are modulated by the ion-pairing energetics and ligand architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of the morphology of supported subnanometer Pt clusters on the first and key step of CO 2 photoreduction [Morphology effect of supported subnanometer Pt clusters on first and key step of CO 2 photoreduction]

In this study, using density functional theory calculations, we investigate the influence of size-dependent cluster morphology on the synergistic catalytic properties of anatase TiO 2 (101) surfaces decorated with subnanometer Pt clusters. Focusing on the formation of the key precursor in the CO 2 photoreduction reaction (bent CO 2 – ), we find that flatter (2D-like) Pt clusters that “wet” the TiO 2 surface offer significantly less benefit than 3D-like Pt clusters. We attribute the differences to three factors. First, the 3D clusters provide a greater number of accessible Pt–TiO 2 interfacial sites with geometries that can aid CO 2 bond bending and charge transfer processes. Second, binding competition among each Pt–CO 2 bonding interaction mitigates maximum orbital overlaps, leading to insufficient CO 2 binding. Third and also most interestingly, the 3D clusters tend to possess higher structural fluxionality than the flatter clusters, which is shown to correlate positively with CO2 binding strength. The preferred morphology adopted by the clusters depends on several factors, including the cluster size and the presence of oxygen vacancies on the TiO 2 surface; this suggests a strategy for optimizing the synergistic effect between Pt clusters and TiO 2 surfaces for CO 2 photocatalysis. Clusters of ~6–8 atoms should provide the largest benefit, since they retain the desired 3D morphology, yet are small enough to exhibit high structural fluxionality. Electronic structure analysis provides additional insight into the electronic motivations for the enhanced binding of CO 2 on TiO 2 -supported 3D Pt clusters, as well as suppressed binding on flattened, 2D-like clusters.

30 DIRECT ENERGY CONVERSION↗

Effect of annealing on the martensitic transformation and magnetocaloric effect in Ni{sub 44.1}Mn{sub 44.2}Sn{sub 11.7} ribbons

The Ni{sub 44.1}Mn{sub 44.2}Sn{sub 11.7} ribbons were prepared by melt spinning. A single-phase austenite with L2{sub 1} structure was confirmed in the melt-spun ribbons at room temperature. After the heat treatment, the martensitic transformation temperature increases obviously in the annealed ribbons. This method may be an effective way to tune the characteristic temperatures in the ferromagnetic shape memory alloys. Giant magnetic entropy changes are observed in the annealed ribbons. The peak values at 10 kOe are 32.1 and 20.1 J/kg K, for the ribbons annealed at 1123 and 1173 K, respectively.

36 MATERIALS SCIENCE↗

Qualitative Prediction of the Confinement Effect in the Effective Mass Using a Density Functional kcentre dotp Perturbation Calculation

A procedure is proposed to predict electronic structures in thin films from bulk properties using density functional kcentre dotp perturbation method. This procedure is based on the phenomenological expression of zero-point energy using effective mass approximation. It is found that the results by this procedure and those calculated using slab models agrees very well. A prediction is also demonstrated for the electronic structures of <110> uniaxially strained silicon thin films in the <001> confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of fluorine incorporation into HfO{sub 2} gate dielectrics on InP and In{sub 0.53}Ga{sub 0.47}As metal-oxide-semiconductor field-effect-transistors

In this work, the effects of fluorine (F) incorporation on electrical characteristics of HfO{sub 2}/InP and HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As gate stack are presented. F had been introduced into HfO{sub 2} gate dielectric by postgate CF{sub 4} plasma treatment, which was confirmed by x-ray photoelectron spectroscopy analysis and a secondary ion mass spectrometry technique. Compared to the control sample, fluorinated samples had great improvements in subthreshold swing, hysteresis, the normalized extrinsic transconductance, and the normalized drain current. These improvements can be attributed to the reduction in fixed charge in the HfO{sub 2} bulk and less interface trap density at the HfO{sub 2}/III-V interface.

36 MATERIALS SCIENCE↗

AlGaN/GaN field effect transistors for power electronics—Effect of finite GaN layer thickness on thermal characteristics

AlGaN/GaN heterostructure field effect transistors with a 150 nm thick GaN channel within stacked Al{sub x}Ga{sub 1−x}N layers were investigated using Raman thermography. By fitting a thermal simulation to the measured temperatures, the thermal conductivity of the GaN channel was determined to be 60 W m{sup −1} K{sup −1}, over 50% less than typical GaN epilayers, causing an increased peak channel temperature. This agrees with a nanoscale model. A low thermal conductivity AlGaN buffer means the GaN spreads heat; its properties are important for device thermal characteristics. When designing power devices with thin GaN layers, as well as electrical considerations, the reduced channel thermal conductivity must be considered.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of threading dislocations on drain current dispersion and slow transients in unpassivated AlGaN/GaN/Si heterostructure field-effect transistors

Current transient analysis combined with response to pulsed bias drives have been used to explore the possibilities of threading dislocations affecting the current dispersion characteristics of AlGaN/GaN heterostructure field-effect transistors (HFETs). A growth strategy is developed to modulate the dislocation density among the heterostructures grown on silicon by plasma-assisted molecular-beam epitaxy. Slow pulsed I-V measurements show severe compressions and appear to be significantly dependent on the threading dislocation density. By analyzing the corresponding slow detrapping process, a deep-level trap with emission time constant in the order of seconds was identified as the cause. Among the specimens, both in the epilayers and at the surface, the number of dislocations was found to have a notable influence on the spatial distribution of deep-level trap density. The observations confirm that the commonly observed degraded frequency performance among AlGaN/GaN HFETs in the form of DC-radio frequency dispersions can at least partly be correlated with threading dislocation density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of electron trap states on spin-dependent transport characteristics in CoFe/MgO/n{sup +}-Si junctions investigated by Hanle effect measurements and inelastic electron tunneling spectroscopy

Spin-dependent transport properties in CoFe/MgO/n{sup +}-Si junctions were investigated by Hanle effect measurements and inelastic electron tunneling (IET) spectroscopy. The CoFe/MgO/n{sup +}-Si junctions examined in this study exhibited two different Hanle curves. In the low bias region, broad Hanle signals were mainly observed; in the high bias region, narrow Hanle signals were mainly observed. The d{sup 2}I/dV{sup 2}-V curves (which correspond to IET spectra) contain several peaks originating from phonon modes and other peaks originating from electron trap states. At the bias voltage where electron trap states are observed, Δd{sup 2}I/dV{sup 2} depends on the magnetic field and the full width at half-maximum of the Δd{sup 2}I/dV{sup 2}–H curves corresponds to that of the broad Hanle signals. These results indicate that electron trap states are located in the low energy region and cause a decrease in spin lifetime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of niobium addition on the martensitic transformation and magnetocaloric effect in low hysteresis NiCoMnSn magnetic shape memory alloys

The effect of Nb substitution for Ni in Ni{sub 45}Co{sub 5}Mn{sub 40}Sn{sub 10} magnetic shape memory alloys on their magnetic properties, martensitic transformation characteristics, transformation hysteresis, and magnetocaloric properties was studied using wavelength-dispersive X-ray spectroscopy, differential scanning calorimetry, and the temperature and field dependence of the magnetization. Ni{sub 45}Co{sub 5}Mn{sub 40}Sn{sub 10} alloy has a very low transformation hysteresis; however, the martensitic transformation temperatures are notably above room temperature, which is not desirable for magnetic refrigeration applications. In this study, small quantities of Nb substitution were shown to drastically shift the transformation temperatures to lower temperatures, at a rate of 68 K/at. % Nb, which is needed for household refrigeration. The austenite Curie temperature also decreased with increasing Nb content. However, a decrease in the latent heat of the martensitic transition was observed, which negatively affects the magnetic field-induced adiabatic temperature change capability. Still, the relatively large transformation entropy and the low transformation hysteresis make the Nb-doped Ni{sub 45}Co{sub 5}Mn{sub 40}Sn{sub 10} alloys potential candidates for solid state refrigeration near room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and magneto-transport studies of substrate effect on the martensitic transformation in a NiMnIn shape memory alloy

The effect of substrates on the magnetic and transport properties of Ni{sub 2}Mn{sub 1.5}In{sub 0.5} ultra-thin films were studied theoretically and experimentally. High quality 8-nm films were grown by laser-assisted molecular beam epitaxy deposition. Magneto-transport measurements revealed that the films undergo electronic structure transformation similar to those of bulk materials at the martensitic transformation. The temperature of the transformation depends strongly on lattice parameters of the substrate. To explain this behavior, we performed DFT calculations on the system and found that different substrates change the relative stability of the ferromagnetic (FM) austenite and ferrimagnetic (FiM) martensite states. We conclude that the energy difference between the FM austenite and FiM martensite states in Ni{sub 2}Mn{sub 1.5}In{sub 0.5} films grown on MgO (001) substrates is ΔE = 0.20 eV per NiMnIn f.u, somewhat lower compared to ΔE = 0.24 eV in the bulk material with the same lattice parameters. When the lattice parameters of Ni{sub 2}Mn{sub 1.5}In{sub 0.5} film have values close to those of the MgO substrate, the energy difference becomes ΔE = 0.08 eV per NiMnIn f.u. These results suggest the possibility to control the martensitic transition in thin films through substrate engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size-effects in indium gallium arsenide nanowire field-effect transistors

We fabricate and analyze InGaAs nanowire MOSFETs with channel widths down to 18 nm. Low-temperature measurements reveal quantized conductance due to subband splitting, a characteristic of 1D systems. We relate these features to device performance at room-temperature. In particular, the threshold voltage versus nanowire width is explained by direct observation of quantization of the first sub-band, i.e., band gap widening. An analytical effective mass quantum well model is able to describe the observed band structure. The results reveal a compromise between reliability, i.e., V{sub T} variability, and on-current, through the mean free path, in the choice of the channel material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗